Beruflich Dokumente
Kultur Dokumente
RESOLUCIN INTERDEPARTAMENTAL N 30
PROGRAMA ANALTICO
y de
EXMENES FINALES
UNIVERSIDAD NACIONAL DE LA RIOJA
Carrera: Geologa
Ordenanza: 310/05
Asignatura: Geotecnia
Curso: 5o ao
Cuatrimestre: 1
Profesor Titular: Dr. Mauricio Giambastiani
Profesor Adjunto: Gel. Norma Quiroga
Ao: 2014
PROGRAMA ANALTICO
Contenidos de la Asignatura:
UNIDAD N 5 : Taludes
Contenidos
- Tipos de Taludes: naturales y artificiales
- Factores geolgicos que interfieren en la estabilidad: discontinuidades, formaciones geolgicas, agua
subterrnea, tensiones naturales y actividad ssmica, etc.
- Tipos de rotura: En suelos: rotura circular En roca: rotura circular, plana, por cua, por volcamiento.
- Anlisis de la Estabilidad: mtodos de equilibrio limite en suelo y roca
- Clasificacin Geomecnica de Taludes en roca: SRMR de Romana
- Mtodos de excavacin
- Medidas de estabilizacin
- Instrumentacin y control
Prcticos Involucrados: TP-9 (Ejercicios de aplicacin sala de clases).
TP-10 (Anlisis de \estabilidad de taludes a partir de los datos recogidos en el viaje de
campo
Bibliografa:
Bsica:
(1) Gonzales de Vallejo, L.I. Ferrer, M. Ortuo, L. y Oteo, C. Ingeniera Geolgica. Ed. Pearson
Prentice Hall. 744p. 2002.
(2) Jurez Badillo; Rico Rodrguez; Mecnica de los Suelos; Tomo I, Tomo II y Tomo III.
(3) Lambe, T.W y Whitman, R.v. Soil Mechanics. John Wiley & Sons. 1979
(4) Goodman, R.E. Introduction to Rock Mechanics. Ed. John Wiley & Sons. 1989.
(5) Barton, N. Lie, R. and Lunde, J. (1974). Engineeringclassification of rock masses for the design
of tunnel support. Rock Mechanics. Vol 6. Pp. 189-236.
(6) Bieniawski, Z.T. (1989). Engineering rock mass classification. John Wiley and Sons, Inc.
(7) Hoek, E. and Bray, J.W (1981). Rock slope engineering. #rd ed. The Institution of mining and
Metallurgy, London.
(8) Hoek, E and Brown, E.T (1980). Underground excavation in rock. The Institution of mining and
Metallurgy, London.
(9) International Society of Rock Mechanics (2006). The Blue Book: "The Complete ISRM
Suggested Methods for Rock Characterization, Testing and Monitoring:1974-2006", Edited by
R. Ulusay and J.A. Hudson.
(10) Hoek, E., Kaiser, P.K. and Bawden, W.F (1995). Support of underground excavation in hard
rocks. Balkema.
(11) Custodio, E. and Llamas, M.R. (1996). Hidrologia subterrnea. Tomos I y II, 2 edicin Omega.
Barcelona.
(12) IGME (1987). Manual de Taludes. Serie Geotecnia. Instituto Geolgico y Minero de Espaa.
Madrid.
(13) ICOLD (1993). La cimentacin de presas em macizos rocosos. Boletin 88. Comite Espaol de
Grandes Presas. Madrid.
(14) ICOLD (1998). Neotectonics and dams. Guidelines and Case Histories. Bulletin, 112, Paris.
Complementaria:
[1].
Barton, N. Choubey, V. (1977). The shear strength of rock joint in theory and practice. Rock
Mechanics, vol. 10, no1, pp, 1-54.
[2].
Hudson, J.A and Harrison, J.P.(2000). Enginnering Rock Mechanics. An introduction to the
principles. Pergamon.
[3].
Brady, B.H and Brown, E.T. (1985). Rock Mechanics for Underground mining. George Allen an
Unwin. London.
[4].
Fookes, P.G. (1997). The first Glossop Lecture. Geological Society of London. Geology for
Enginners: The Geological Model, prediction and perfomance. Quarterly Journal of Engineering
Geology, Vol. 3. Part 4.
[5].
IAEG (1981a). Rock and Soils description and classification for engineering geological
mapping. Report by the IAEG Comission on Engineering Geological Mapping. Bull. Of the IAEG, no24,
pp. 235-274.
[6].
IAEG (1981b). Recommended symbols for engineering geological mapping. Report by the IAEG
Comission on Engineering Geological Mapping. Bull. Of the IAEG, no24, pp. 227-234.
[7].
ICOLD (1998). Neotectonics and dams. Guidelines and Case Histories. Bulletin, 112, Paris.