Beruflich Dokumente
Kultur Dokumente
UGRAYTM are 3-6 layered aggregates of sub-micron sheet with a lateral dimension of 5-10
microns with high aspect ratio about 1000 up to 99% carbon content along-with natural
presence of other entities. Grayish black flakes products are in the form of powder and seek
unlimited application. Optimally, when UGRAYTM mixes in minute quantity to host matrix
such as polymer, metals, it improves the Mechanical, Thermal & Electrical properties without
significant increase in the finished products cost.
Produced by Chemical exfoliation
proprietary method
Advantages of UGRAYTM
High aspect ratio
Ease to handle
Very thin exfoliated sheet
Ultimately High Purity
TECHNICAL PARAMETERS
DENSITY
Thermal
Tensile Modulus
Tensile Strength
Thermal Conductivity
PARALLEL TO SURFACE
Conductivity 3,000 watts/m-K
>1,000 GPa
>5 Gpa
107Siemens/m
Bulk Density
Diameter Average X &Y Dimensions
Thickness Average Z Dimension
Purity
Number of Layer
Surface Area
PERPENDICULAR TO
SURFACE
6 watts/m-k
Not applicable
Not applicable
102Siemens/m
0.241g/cc
5-10 micron
3-6 nm
96-99%
Average number of Layer 3-6
323-600 m2/g
EMPLOYEE NEWSLETTER
EMPLOYEE NEWSLETTER
EMPLOYEE NEWSLETTER
APPLICATIONS AREA
APPLICATION AREA
UNIPL improves the mechanical performance, thermal conductivity, electrical conductivity,
and permeation barrier properties of a range of composites and formulations. In UNIPL
Graphene layers are entirely disassociated ensuring good dispersion and ease of handling
while providing the full performance advantages of Graphene.
UNIPL-Graphene has been successfully implemented and is recommended for following
areas. Although the main users are: Academic research centers, Defense laboratories AND
Industries covering-Composite /Structural materials, Paint &Coating, Energy, Biomedical,
Electronics etc.
Protective Structural Materials
(as
Transparent Conductive Film
Nanofillers and Nanocomposites)
Organic Photovoltaic cells
Fuel (Cryogenic) Tanks
Organic light emitting diodes
EM Shielding
Sensors & Catalysts
Ballistic/fragment protection
Liquid Crystal Displays
Engine and turbine components
Touch screens
Protective Elastomer components
Conductive films
Reinforcement of polymers[Epoxy]
Conductive plastic
Tier/Tyre
Transparent conductive coatings
Energy Storage & Electric
Devices
Anti-microbial, Chemical, & Thermal
Solar energy
Anti-bacterial paper
Super capacitors
Air & water purification
Li-ion batteries
Chemical & explosive detecting sensors
Integrated circuits
Microbial detection & diagnosis devices
Electrochromic devices
E-papers & Conductive inks
MEMS & NEMS, nanoelectronics,
MICR inks
Field-effect transistors
Thermal management & interfacial materials
EMPLOYEE
NEWSLETTER
UGRAY
provide
stable dispersion of Graphene in water, and other common organic
solvent including ethanol, DMF, IPA, Resins etc . Master batch is available upto
3%Wt/V in desired solvent.
DISCLAIMER
The values are typical and are for very general guidance and must not be used as a basis for
specifications as concrete. Information contained in this publication, and otherwise supplied to
users, is based on our general experience and is given in good faith, but we are unable to
accept responsibility in respect of factors which are outside our knowledge or control. No
warranty, either expressed or implied, is hereby made. The recommended industrial hygiene
and safe handling procedures are believed to be generally applicable. Please refer MSDS of
respective product for safe use. Please contact UNITED NANOTECH INNOVATIONS P.LTD for
updated technical inquiries.
It is the responsibility of the customer to ensure that the use complies with all relevant
regulation and specific application.