Beruflich Dokumente
Kultur Dokumente
UNIVER DOORS
EI2 30 - EI2 60
REI 60 - REI 120
UNIVER DOORS INDEX
ILLUSTRATIONS UNIVER DOORS
MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS EI2 30
MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS EI2 60
MODELS/CERTIFICATES UNIVER DOUBLE-LEAF DOORS EI2 60
MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS REI 60
MODELS/CERTIFICATES UNIVER DOUBLE-LEAF DOORS REI 60
MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS REI 120
MODELS/CERTIFICATES UNIVER DOUBLE-LEAF DOORS REI 120
SPECIFICATIONS/SECTIONS UNIVER EI2 30 SINGLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER EI2 60 SINGLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER EI2 60 DOUBLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER REI 60 SINGLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER REI 60 DOUBLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER REI 120 SINGLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER REI 120 DOUBLE-LEAF DOORS
DIMENSIONS UNIVER SINGLE-LEAF DOORS
DIMENSIONS UNIVER DOUBLE-LEAF DOORS
POSITIONS OF BRACKETS/ENCUMBRANCES UNIVER DOORS
ENCUMBRANCES/GLASS PANELS UNIVER DOORS
ACCESSORIES UNIVER DOORS
SURFACE FINISHING UNIVER DOORS
PAGE
04
05-06
07
07
08
09
10
11
12
14
15
16
17
18
19
20
21
22
23
24
25-26
27
Ninz company maintains the right to introduce technical modifications any time without notice.
All dimensions expressed in mm.
Fire break doors are normally installed to compartmentalize the inside of buildings and are built for
that purpose.
04
PAGE
PROGET DOORS INDEX
30
ILLUSTRATIONS PROGET DOORS
31-32
MODELS/CERTIFICATES PROGET REI 30 SINGLE-LEAF DOORS ON SUB FRAME
33
MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS
33-34
MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS
34-35
MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS
36-37
MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS
37-38
MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
39
MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
39-40
MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
40-41
MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
41-42
MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD PARTITION
42
MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD PARTITION
42-43
MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD PARTTITION
43
MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD PARTTITION
44
MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME 44-45
MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME 45-46
MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME
46
MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME
47
SPECIFICATIONS/SECTIONS PROGET MULTIPURPOSE SINGLE-LEAF DOORS
49
SPECIFICATIONS/SECTIONS PROGET MULTIPURPOSE DOUBLE-LEAF DOORS
50
SPECIFICATIONS/SECTIONS PROGET REI 30 SINGLE-LEAF DOORS ON SUB FRAME
52
SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 SINGLE-LEAF DOORS
53
SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 DOUBLE-LEAF DOORS
54
SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 SINGLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
55
SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 DOUBLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING 56
SPECIFICATIONS/SECTIONS PLASTERBOARD PARTITION - PROGET REI 60 DOORS
57-58
SPECIFICATIONS/SECTIONS PLASTERBOARD PARTITION - PROGET REI 120 DOORS
59-60
SPECIFICATIONS/SECTIONS PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME
61
SPECIFICATIONS/SECTIONS PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME
62
SPECIFICATIONS/SECTIONS PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME
63
SPECIFICATIONS/SECTIONS PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD APP. WALL CLAMP FRAME
64
DIMENSIONS PROGET SINGLE-LEAF DOORS STANDARD
65
DIMENSIONS PROGET SINGLE-LEAF DOORS SEMISTANDARD AND TO ORDER
66
DIMENSIONS PROGET DOUBLE-LEAF DOORS STANDARD
67
DIMENSIONS PROGET DOUBLE-LEAF DOORS SEMISTANDARD AND TO ORDER
68
POSITIONS OF BRACKETS PROGET DOORS TO BE SET BY MORTAR
69-70
ENCUMBRANCES PROGET SINGLE-LEAF DOORS
71
ENCUMBRANCES PROGET DOUBLE-LEAF DOORS
72
ACCESSORIES HANDLES FOR PROGET DOORS
73
ACCESSORIES EMERGENCY HANDLES FOR PROGET DOORS
74
GLASS PANELS PROGET MULTIPURPOSE DOORS
75
GLASS PANELS PLASTIC LOUVRE PROGET MULTIPURPOSE DOORS
76
GLASS PANELS PROGET REI 60 AND REI 120 DOORS
77
SECTIONS GLASS PANELS PROGET REI 60 AND REI 120 DOORS
78
ACCESSORIES DOOR CLOSER AND CARRIER ARM FOR PROGET DOORS
79
ACCESSORIES SEQUENCERS FOR PROGET DOORS
80
ACCESSORIES SPECIAL ACCESSORIES FOR PROGET DOORS
81
FRAME EXTENSIONS/APPLICATIONS PROGET DOORS
82
SURFACE FINISHING PROGET DOORS
83
DETECTORS/ELECTROMAGNETS
84
ACCESS CONTROL SYSTEM SCA
85-86
ELECTRIC HANDLE ELM
87-88
SYSTEM CONTROLLED OPENING/LOCK 3 CLOSING POINTS
89
Ninz company maintains the right to introduce technical modifications at any time without notice.
All dimensions are expressed in mm.
Fire break doors are normally installed to compartmentalize the inside of buildings and for that
purpose they are built.
30
MULTIPURPOSE DOORS
REVER
PAGE
90
91
92
93-94
95
96
Ninz company maintains the right to introduce technical modifications any time without notice.
All dimensions expressed in mm.
Rever doors are normally installed to compartmentalize the inside of buildings and are built for that
purpose.
90
UNIVER DOORS
EI2 30 - EI2 60
REI 60 - REI 120
UNIVER DOORS INDEX
ILLUSTRATIONS UNIVER DOORS
MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS EI2 30
MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS EI2 60
MODELS/CERTIFICATES UNIVER DOUBLE-LEAF DOORS EI2 60
MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS REI 60
MODELS/CERTIFICATES UNIVER DOUBLE-LEAF DOORS REI 60
MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS REI 120
MODELS/CERTIFICATES UNIVER DOUBLE-LEAF DOORS REI 120
SPECIFICATIONS/SECTIONS UNIVER EI2 30 SINGLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER EI2 60 SINGLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER EI2 60 DOUBLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER REI 60 SINGLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER REI 60 DOUBLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER REI 120 SINGLE-LEAF DOORS
SPECIFICATIONS/SECTIONS UNIVER REI 120 DOUBLE-LEAF DOORS
DIMENSIONS UNIVER SINGLE-LEAF DOORS
DIMENSIONS UNIVER DOUBLE-LEAF DOORS
POSITIONS OF BRACKETS/ENCUMBRANCES UNIVER DOORS
ENCUMBRANCES/GLASS PANELS UNIVER DOORS
ACCESSORIES UNIVER DOORS
SURFACE FINISHING UNIVER DOORS
PAGE
04
05-06
07
07
08
09
10
11
12
14
15
16
17
18
19
20
21
22
23
24
25-26
27
Ninz company maintains the right to introduce technical modifications any time without notice.
All dimensions expressed in mm.
Fire break doors are normally installed to compartmentalize the inside of buildings and are built for
that purpose.
04
ILLUSTRATIONS
Univer doors
Main
leaf
05
Secondary
leaf
ILLUSTRATIONS
Univer doors
Brackets to fix with mortar. Preparation for fixing with expansion screws.
06
MODELS/CERTIFICATES
Univer EI2 30 single-leaf doors
Versions
Wall opening
L = 800/900/1000
H = 2050/2150
Notes /
Certificates /
Glass panel dimensions Government approval
EI2 30
with BRACKETS
CSI1250FR
(UNI EN 1634)
Wall opening
Notes /
Certificates /
Glass panel dimensions Government approval
EI2 60
L = 540 - 1150
H = 1780 - 2150
a
L = 850 - 1150
H = 1780 - 2150
07
L = 900 - 1150
H = 1780 - 2150
IFT 27132191
IFT 27132192
L = 250
H = 400
EI2 60
a minimum 300
b minimum 300
IFT 27132191
IFT 27132192
L = 300
H = 400
EI2 60
a minimum 300
b minimum 300
IFT 27132191
IFT 27132192
MODELS/CERTIFICATES
Univer EI2 60 double-leaf doors
Versions
Wall opening
Certificates /
Notes /
Glass panel dimensions Government approval
EI2 60
a
b
* = main
leaf
a
L = 1400 (L1 900 + L2 500)2000 (L1 1000 + L2 1000)
H = 1780 - 2150
a minimum 300
b minimum 300
IFT 27132706
IFT 27132707
L = 250
H = 400
EI2 60
a minimum 300
b minimum 300
IFT 27132706
IFT 27132707
L = 300
H = 400
EI2 60
a minimum 300
b minimum 300
IFT 27132706
IFT 27132707
L = 300
H = 400
EI2 60
a minimum 300
b minimum 300
IFT 27132706
IFT 27132707
diam. = 300
EI2 60
a minimum 220
b minimum 300
IFT 27132706
IFT 27132707
diam. = 300
EI2 60
a minimum 220
b minimum 300
IFT 27132706
IFT 27132707
* = main
leaf
EI2 60
*
a
* = main
leaf
L = 250
H = 400
* = main
leaf
IFT 27132706
IFT 27132707
08
MODELS/CERTIFICATES
Univer REI 60 single-leaf doors
Versions
Wall opening
L = 540 - 1000
H = 1780 - 2150
L = 856 - 1144
H = 1938 - 2150
L = 1145 - 1350
H = 1938 - 2150
a
L = 850 - 1020
H = 1780 - 2150
L = 880 - 1167
H = 1938 - 2150
a
L = 900 - 1167
H = 1938 - 2150
a
L = 740 - 1020
H = 1780 - 2150
L = 880 - 1167
H = 1938 - 2150
09
Notes /
Certificates /
Glass panel dimensions Government approval
REI 60
with BRACKETS
with EXPANSION
SCREWS
I.G.117935/1812RF
I.G.117936/1813RF
BZ050REI060P022F2
REI 60
with BRACKETS
with EXPANSION
SCREWS
CSI0750RF
CSI0751RF
BZ050REI060P024F2
CSI1181FR
a minimum 300
b minimum 300
BZ050REI060P028E1
CSI1181FR
a minimum 300
b minimum 300
BZ050REI060P028E1
CSI1181FR
a minimum 220
b minimum 300
BZ050REI060P028E1
MODELS/CERTIFICATES
Univer REI 60 double-leaf doors
Versions
Wall opening
Notes /
Certificates /
Glass panel dimensions Government approval
REI 60
CSI1181FR
BZ050REI060P028E1
a
b
* = main
leaf
a
b
* = main
leaf
*
b
* = main
leaf
b
*
L = 250
H = 400
CSI1181FR
a minimum 300
b minimum 300
BZ050REI060P028E1
CSI1181FR
a minimum 300
b minimum 300
BZ050REI060P028E1
CSI1181FR
a minimum 300
b minimum 300
BZ050REI060P028E1
CSI1181FR
a minimum 300
b minimum 300
BZ050REI060P028E1
CSI1181FR
a minimum 220
b minimum 300
*
a
* = main
leaf
BZ050REI060P028E1
with EXPANSION SCREWS REI 60
diam. = 300
CSI1181FR
a minimum 220
b minimum 300
BZ050REI060P028E1
10
MODELS/CERTIFICATES
Univer REI 120 single-leaf doors
Versions
Wall opening
L = 540 - 1000
H = 1780 - 2150
L = 856 - 1144
H = 1938 - 2150
L = 1145 - 1350
H = 1938 - 2150
a
L = 850 - 1020
H = 1780 - 2150
L = 880 - 1167
H = 1938 - 2150
a
L = 900 - 1167
H = 1938 - 2150
a
L = 740 - 1020
H = 1780 - 2150
L = 880 - 1167
H = 1938 - 2150
11
Notes /
Certificates /
Glass panel dimensions Government approval
REI 120
with BRACKETS
with EXPANSION
SCREWS
CSI0735RF
CSI0739RF
BZ050REI120P023F2
REI 120
with BRACKETS
with EXPANSION
SCREWS
CSI0740RF
CSI0741RF
BZ050REI120P021F2
CSI1211FR
a minimum 300
b minimum 300
BZ050REI120P030F1
CSI1211FR
a minimum 300
b minimum 300
BZ050REI120P030F1
CSI1211FR
a minimum 220
b minimum 300
BZ050REI120P030F1
MODELS/CERTIFICATES
Univer REI 120 double-leaf doors
Versions
Wall opening
Notes /
Certificates /
Glass panel dimensions Government approval
REI 120
CSI1211FR
BZ050REI120P030F1
a
b
* = main
leaf
a
b
* = main
leaf
* = main
leaf
b
*
L = 250
H = 400
CSI1211FR
a minimum 300
b minimum 300
BZ050REI120P030F1
CSI1211FR
a minimum 300
b minimum 300
BZ050REI120P030F1
CSI1211FR
a minimum 300
b minimum 300
BZ050REI120P030F1
CSI1211FR
a minimum 300
b minimum 300
BZ050REI120P030F1
CSI1211FR
a minimum 220
b minimum 300
*
a
* = main
leaf
BZ050REI120P030F1
with EXPANSION SCREWS REI 120
diam. = 300
CSI1211FR
a minimum 220
b minimum 300
BZ050REI120P030F1
12
13
SPECIFICATIONS/SECTIONS
Univer EI2 30 single-leaf doors
approx.1075
approx.1125 (FM H 2150)
FFL
External frame= FM H + 13
N.B.
- Cylinder and weather stripping are supplied only upon request.
- For door repainting follow instructions on page surface treatment.
- FFL = Finished floor level.
32
Net passage= FM H - 40
+15
+5
Vertical sections
Net passage = FM L - 74
10
55
Horizontal sections
33
53
Wall opening (FM L) +20
+10
External frame = FM L + 32
14
SPECIFICATIONS/SECTIONS
approx. 1075
approx. 1125 (FM H 2150)
FFL
External frame = FM H + 13
N.B.
- Cylinder and weather stripping are supplied only upon request.
- For door repainting follow instructions on page surface treatment.
- FFL = Finished floor level.
32
Net passage = FM H - 40
Vertical sections
Net passage = FM L - 74
10
65
Horizontal sections
33
53
Wall opening (FM L) +20
+10
External frame = FM L + 32
15
SPECIFICATIONS/SECTIONS
FFL
External frame = FM H + 13
Net passage = FM H - 40
+15
Vertical sections
32
approx. 1075
approx. 1125 (FM H 2150)
10
65
Horizontal sections
33
if necessary, floor catch set
53
L2
L1
+20
16
SPECIFICATIONS/SECTIONS
approx. 1075
approx. 1125 (FM H 2150)
FFL
External frame = FM H + 13
32
Net passage = FM H - 40
+15
Vertical sections
Net passage = FM L - 74
10
55
Horizontal sections
33
53
Wall opening (FM L) +20
+10
External frame = FM L + 32
17
SPECIFICATIONS/SECTIONS
32
FFL
External frame = FM H + 13
+15
Vertical sections
Net passage = FM H - 40
Strengthening plates inside door leaf for fastening door closer and
emergency handle if required.
Floor catch to be fitted by means of screws/plugs onto the finished floor.
Thermoexpanding gasket inserted in appropriate cavity in frame.
Identification plate on door edge.
Standard epoxy-polyester oven-baked powder coated with anti-scratch
beaten finish - light pastel turquoise for door leaves (NCS4020-B50G),
and a darker shade for the frame (NCS5020-B50G). By request, powder
coating in RAL or decorative NDD Ninz Digital Decor can be applied
for decorative or graphic elements. Surface treatment of the door leaves
is carried out using oven-baked epoxy-polyester powder and graphic
printing of the decoration on the flat side of the door leaves by means
of sprayed inks. The decoration is protected by transparent varnish. The finishing
can be smooth or embossed in accordance with the decoration selected.
The dimensions of the doors are limited according to the specifications
shown in the page model/certificates.
Maximum dimensions: 2000 x 2150 mm.
Weight approx. 33 kg/m wall opening.
N.B.
- Cylinder and weather stripping are supplied only upon request.
- For door repainting follow instructions on page surface treatment.
- FFL = Finished floor level.
approx. 1075
approx. 1125 (FM H 2150)
Net passage = FM L - 80
Net passage main leaf = L1 -75
10
55
Horizontal sections
33
53
L2
L1
Wall opening (FM L)
+20
+10
18
SPECIFICATIONS/SECTIONS
approx. 1075
approx. 1125 (FM H 2150)
FFL
External frame = FM H + 13
+5
Wall opening (FM H) +15
32
Net passage = FM H - 40
Vertical sections
Net passage = FM L - 74
10
65
Horizontal sections
33
53
Wall opening (FM L) +20
+10
External frame = FM L + 32
19
SPECIFICATIONS/SECTIONS
FFL
External frame = FM H + 13
+5
Wall opening (FM H) +15
Net passage = FM H - 40
Vertical sections
32
approx. 1075
approx. 1125 (FM H 2150)
10
65
Horizontal sections
33
if necessary, floor catch set
53
L2
L1
+20
20
DIMENSIONS
width
NET PASSAGE
height
width
EXTERNAL FRAME
height
800
900
1000
1200
1350
2050
2050
2050
2050
2050
726
826
926
1126
1276
2010
2010
2010
2010
2010
832
932
1032
1232
1382
2063
2063
2063
2063
2063
800
900
1000
1200
1350
2150
2150
2150
2150
2150
726
826
926
1126
1276
2110
2110
2110
2110
2110
832
932
1032
1232
1382
2163
2163
2163
2163
2163
540
805
905
2150
2150
2150
min.
466
731
831
NET PASSAGE
width
max.
721
821
921
721
821
921
466
731
831
height
2010
2010
2010
min.
572
837
937
2110
2110
2110
572
837
937
EXTERNAL FRAME
width
height
max.
2063
827
2063
927
2063
1027
827
927
1027
2163
2163
2163
NET PASSAGE
+20
+10
min.
466
width
max.
1256
height
min.
max.
1740
2110
EXTERNAL FRAME
width
height
min.
max.
min.
max.
572
1362
1793
2163
21
DIMENSIONS
+20
+10
height
+15
+5
LEAF DIVISION
main L1
second. L2
1150
1200
1200
1250
1300
1300
1350
1400
1400
1450
1500
1600
1700
1800
1900
2000
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
750
600
800
800
650
900
900
700
1000
1000
750
800
900
900
1000
1000
400
600
400
450
650
400
450
700
400
450
750
800
800
900
900
1000
total
1070
1120
1120
1170
1220
1220
1270
1320
1320
1370
1370
1520
1620
1720
1820
1920
1150
1200
1200
1250
1300
1300
1350
1400
1400
1450
1500
1600
1700
1800
1900
2000
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
750
600
800
800
650
900
900
700
1000
1000
750
800
900
900
1000
1000
400
600
400
450
650
400
450
700
400
450
750
800
800
900
900
1000
1070
1120
1120
1170
1220
1220
1270
1320
1320
1370
1520
1520
1620
1720
1820
1920
NET PASSAGE
width
main
675
525
725
725
575
825
825
625
925
925
675
725
825
825
925
925
675
525
725
725
575
825
825
625
925
925
675
725
825
825
925
925
EXTERNAL FRAME
height
width
height
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
1176
1226
1226
1276
1326
1326
1376
1426
1426
1476
1526
1626
1726
1826
1926
2026
2063
2063
2063
2063
2063
2063
2063
2063
2063
2063
2063
2063
2063
2063
2063
2063
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
1176
1226
1226
1276
1326
1326
1376
1426
1426
1476
1626
1626
1726
1826
1926
2026
2163
2163
2163
2163
2163
2163
2163
2163
2163
2163
2163
2163
2163
2163
2163
2163
LEAF DIVISION
main L1
secondary L2
min.
max.
min.
max.
540
995
400
995
NET PASSAGE
total width
min.
max.
860
1910
height
940
540
860
2110
1990
2150
995
400
995
1910
2010
22
POSITIONS OF BRACKETS/ENCUMBRANCES
Univer doors
342
L1-252
FM H +33
2
342
334
40
175
37
80
37
10
280
30
X
Z
20
23
FFL
L2-252
175
X = FM L +29
Z = FM L -198
A TW = 100
A SL = 75
A TX = 130
A TB = 74
B REI120 = 74
B REI60 = 64
B EI2 60 = 74
B EI2 30 = 64
Height of handle
see page
Specifications/
Sections
200
80
FM H-41
2
FFL
200
334
FM H+33
2
342
L1-252
80
FM H-41
2
L2-252
334
FM H +89
2
200
80
FM H -41
2
FM H+33
2
334
FFL
FM L+37
2
342
200
80
FM H-97
2
FFL
FM L+37
2
X = FM L +4
Z = FM L -223
Height of handle see page Specifications/Sections
Maximum dimensions for single-leaf doors opening 180
ENCUMBRANCES/GLASS PANELS
Univer doors
L2
175
L2
40
40
30
40
L1
80
280
10
L1
X = L1 +35
Y = L2 +64
Z = L1 -198
A TW = 100
A SL = 75
A TX = 130
A TB = 74
B REI120 = 77
B REI60 = 67
B EI2 60 = 77
Height of handle see
A
page Specifications/
20
Sections
Maximum dimensions for double-leaf doors opening to 90
175
(FM L/L1/L2)
X = L1 +5
Y = L2 +34
Z = L1 -223
Height of handle see page Specifications/Sections
Maximum dimensions for double-leaf doors opening to 180
Concealment frame
= Optional
50
50
15
Glass dim. LxH
Edge
Wall opening
Concealment frame
= Optional
15
Glass dim. LxH
Edge
Wall opening
300
min.
53.5
53.5
Glass
(FM L/L1/L2)
FM L / L1
L2
FM H = 2050-2150
16.5
16.5
Edge
min. 900
min. 900
A = 1600
Wall opening
Horizontal section of circular window
with REI 60 glass
Edge
Wall opening
Horizontal section of circular window
with REI 120 glass
24
ACCESSORIES
Univer doors
73
10
L= 35 mm for leaf
with thickness 50 mm
L= 40 mm for leaf
with thickness 60 mm
approx. 290
51
38
25
SLASH (SL)
210
200
36
Holes-cover plate
for main leaf
Vertical sections
Support with
chlosing regulator
Carrier arm
Horizontal sections
eaf
yl
dar
90
con
Se
Ma
in l
eaf
05
04
01
01
02
03
01
02
03
04
05
Lock SCA
Wiring
Electric contacts
Activation device (to order)
Current line (by client)
05
04
H std. = 850
03
02
26
SURFACE FINISHING
Univer doors
RAL 9011
RAL 8011
RAL 7038
RAL 7035
RAL 7024
RAL 6005
RAL 6000
RAL 5024
RAL 5010
RAL 3000
RAL 1015
RAL 1003
RAL 9018
RAL 9002
RAL 9001
RAL 1013
RAL 9010
27
PROGET DOORS
MULTIPURPOSE
REI 30
REI 60 - REI 120
28
29
PAGE
PROGET DOORS INDEX
30
ILLUSTRATIONS PROGET DOORS
31-32
MODELS/CERTIFICATES PROGET REI 30 SINGLE-LEAF DOORS ON SUB FRAME
33
MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS
33-34
MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS
34-35
MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS
36-37
MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS
37-38
MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
39
MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
39-40
MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
40-41
MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
41-42
MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD PARTITION
42
MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD PARTITION
42-43
MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD PARTTITION
43
MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD PARTTITION
44
MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME 44-45
MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME 45-46
MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME
46
MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME
47
SPECIFICATIONS/SECTIONS PROGET MULTIPURPOSE SINGLE-LEAF DOORS
49
SPECIFICATIONS/SECTIONS PROGET MULTIPURPOSE DOUBLE-LEAF DOORS
50
SPECIFICATIONS/SECTIONS PROGET REI 30 SINGLE-LEAF DOORS ON SUB FRAME
52
SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 SINGLE-LEAF DOORS
53
SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 DOUBLE-LEAF DOORS
54
SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 SINGLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING
55
SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 DOUBLE-LEAF DOORS SCREW OR EXPANSION SCREW FIXING 56
SPECIFICATIONS/SECTIONS PLASTERBOARD PARTITION - PROGET REI 60 DOORS
57-58
SPECIFICATIONS/SECTIONS PLASTERBOARD PARTITION - PROGET REI 120 DOORS
59-60
SPECIFICATIONS/SECTIONS PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME
61
SPECIFICATIONS/SECTIONS PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME
62
SPECIFICATIONS/SECTIONS PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME
63
SPECIFICATIONS/SECTIONS PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD APP. WALL CLAMP FRAME
64
DIMENSIONS PROGET SINGLE-LEAF DOORS STANDARD
65
DIMENSIONS PROGET SINGLE-LEAF DOORS SEMISTANDARD AND TO ORDER
66
DIMENSIONS PROGET DOUBLE-LEAF DOORS STANDARD
67
DIMENSIONS PROGET DOUBLE-LEAF DOORS SEMISTANDARD AND TO ORDER
68
POSITIONS OF BRACKETS PROGET DOORS TO BE SET BY MORTAR
69-70
ENCUMBRANCES PROGET SINGLE-LEAF DOORS
71
ENCUMBRANCES PROGET DOUBLE-LEAF DOORS
72
ACCESSORIES HANDLES FOR PROGET DOORS
73
ACCESSORIES EMERGENCY HANDLES FOR PROGET DOORS
74
GLASS PANELS PROGET MULTIPURPOSE DOORS
75
GLASS PANELS PLASTIC LOUVRE PROGET MULTIPURPOSE DOORS
76
GLASS PANELS PROGET REI 60 AND REI 120 DOORS
77
SECTIONS GLASS PANELS PROGET REI 60 AND REI 120 DOORS
78
ACCESSORIES DOOR CLOSER AND CARRIER ARM FOR PROGET DOORS
79
ACCESSORIES SEQUENCERS FOR PROGET DOORS
80
ACCESSORIES SPECIAL ACCESSORIES FOR PROGET DOORS
81
FRAME EXTENSIONS/APPLICATIONS PROGET DOORS
82
SURFACE FINISHING PROGET DOORS
83
DETECTORS/ELECTROMAGNETS
84
ACCESS CONTROL SYSTEM SCA
85-86
ELECTRIC HANDLE ELM
87-88
SYSTEM CONTROLLED OPENING/LOCK 3 CLOSING POINTS
89
Ninz company maintains the right to introduce technical modifications at any time without notice.
All dimensions are expressed in mm.
Fire break doors are normally installed to compartmentalize the inside of buildings and for that
purpose they are built.
30
ILLUSTRATIONS
Proget doors
31
ILLUSTRATIONS
Proget doors
32
MODELS/CERTIFICATES
Proget REI30 single-leaf doors
on sub-frame
Wall opening
dimensions
Versions
Glass panel
dimensions
Certificates /
Government approval
L = 546 - 1000
H= 1775 - 2150
REI 30
CSI0643RF
BZ050REI030P018F2
L = 857 - 1143
H= 1938 - 2363
Versions
Glass panel
dimensions
Certificates /
Government approval
L = 546 - 900
H= 1775 - 2000
REI 60
CSI0420RF
BZ050REI060P005F1
L = 546 - 1000
H= 1775 - 2150
L = 750 - 900
H= 1775 - 2000
REI 60
CSI0613RF
BZ050REI060P012F2
L = 250 - 400
H= 250 - 600
a minimum 250
b minimum 300
L = 850 - 1000
H= 1775 - 2150
L = 250 - 400
H= 250 - 600
a minimum 300
b minimum 300
33
L = 750 - 900
H= 1775 - 2000
L = 779 - 1037
H= 1803 - 2197
L = 250 - 400
H= 630 - 1400
min.area 0.25m
a minimum 250
b minimum 300
REI 60
CSI0420RF
BZ050REI060P005F1
REI 60
CSI0613RF
BZ050REI060P012F2
REI 60
CSI0447RF
BZ050REI060P004F1
MODELS/CERTIFICATES
Proget REI 60 single-leaf doors
Wall opening
dimensions
Versions
Glass panel
dimensions
L = 546 - 1340
H= 1775 - 2670
a
b
L = 970 - 1340
H= 1775 - 2670
Certificates /
Government approval
REI 60
CSI0615RF
BZ050REI060P014F2
L = 250 - 620
H= 250 - 400
a minimum 360
b minimum 300
REI 60
CSI0615RF
BZ050REI060P014F2
Versions
Glass panel
dimensions
REI 60
CSI0614RF
BZ050REI060P013F2
L = 250 - 400
H= 250 - 600
a minimum 300
b minimum 300
* = main
leaf
L = 250 - 400
H = 250 - 600
a
a minimum 300
b minimum 300
* = main
leaf
L = 250 - 400
H= 250 - 600
a
*
Certificates /
Government approval
a minimum 300
b minimum 300
REI 60
CSI0614RF
BZ050REI060P013F2
REI 60
CSI0614RF
BZ050REI060P013F2
REI 60
CSI0614RF
BZ050REI060P013F2
34
MODELS/CERTIFICATES
Proget REI 60 double-leaf doors
Versions
a
*
* = main
leaf
Glass panel
dimensions
a
*
* = main
leaf
Wall opening
dimensions
L = 250 - 400
H = 630 - 1400
area min. 0,25 m
a minimum 250
b minimum 300
b
a
L = 250 - 620
H= 250 - 400
b
a
* = main
leaf
*
35
L = 250 - 620
H= 250 - 400
a minimum 325
b minimum 300
*
L = 1440(L1 540+L2 900)2540(L1 1270+L2 1270)
H= 1775 - 2670
REI 60
CSI0447RF
BZ050REI060P004F1
REI 60
CSI0447RF
BZ050REI060P004F1
REI 60
CSI0621RF
BZ050REI060P016F2
a minimum 325
b minimum 300
* = main
leaf
Certificates /
Government approval
L = 250 - 620
H= 250 - 400
a minimum 325
b minimum 300
REI 60
CSI0621RF
BZ050REI060P016F2
REI 60
CSI0621RF
BZ050REI060P016F2
REI 60
CSI0621RF
BZ050REI060P016F2
MODELS/CERTIFICATES
Proget REI 120 single-leaf doors
Wall opening
dimensions
Versions
Glass panel
dimensions
Certificates /
Government approval
L = 546 - 900
H= 1775 - 2000
REI 120
CSI0452RF
BZ050REI120P002F1
L = 546 - 1000
H= 1775 - 2150
L = 890 - 900
H= 1775 - 2000
REI 120
CSI0611RF
BZ050REI120P010F2
L = 250 - 260
H = 250 - 455
REI 120
CSI0452RF
BZ050REI120P002F1
a minimum 320
b minimum 300
L = 850 - 1000
H= 1775 - 2150
L = 250 - 400
H = 250 - 600
REI 120
CSI0611RF
BZ050REI120P010F2
a minimum 300
b minimum 300
L = 750 - 900
H= 1775 - 2000
L = 779 - 1037
H= 1803 - 2197
L = 250 - 400
H = 630 - 1400
min.area 0,25 m
a minimum 250
b minimum 300
L = 546 - 1340
H= 1775 - 2670
L = 890 - 1162
H= 1775 - 2620
REI 120
CSI0610RF
BZ050REI120P011F2
L = 250 - 522
H= 500 - 1460
min.area 0,25 m
L = 997 - 1332
H= 2361- 2670
REI 120
CSI0454RF
BZ050REI120P006F1
a minimum 320
b minimum 300
REI 120
CSI0460RF
BZ050REI120P007F1
36
MODELS/CERTIFICATES
Proget REI 120 single-leaf doors
Versions
Wall opening
dimensions
Glass panel
dimensions
L = 970 - 1340
H = 1775 - 2670
L = 250 - 620
H= 250 - 400
Certificates /
Government approval
REI 120
CSI0610RF
BZ050REI120P011F2
a minimum 360
b minimum 300
Versions
Glass panel
dimensions
Certificates /
Government approval
REI 120
CSI0602RF
BZ050REI120P008F2
L = 250 - 400
H= 250 - 600
REI 120
CSI0602RF
BZ050REI120P008F2
a minimum 300
b minimum 300
a
* = main
leaf
a
* = main
leaf
L = 250 - 400
H= 250 - 600
REI 120
CSI0602RF
BZ050REI120P008F2
a minimum 300
b minimum 300
a
2
1
*
37
REI 120
CSI0602RF
BZ050REI120P008F2
a minimum 300
b minimum 300
* = main
leaf
L = 250 - 400
H= 250 - 600
1: L= 250- 400
H= 630-1400
min.area 0.25 m
2: L= 250- 400
H= 250- 600
a minimum 250
b minimum 300
REI 120
CSI0454RF
BZ050REI120P006F1
MODELS/CERTIFICATES
Proget REI 120 double-leaf doors
Versions
* = main
leaf
*
Wall opening
dimensions
Glass panel
dimensions
Certificates /
Government approval
L = 250 - 400
H= 630 - 1400
min.area 0,25 m
a minimum 250
b minimum 300
REI 120
CSI0454RF
BZ050REI120P006F1
REI 120
CSI0619RF
BZ050REI120P015F2
L = 250 - 620
H= 250 - 400
REI 120
CSI0619RF
BZ050REI120P015F2
a minimum 325
b minimum 300
* = main
leaf
b
a
b
2
a
*
a
*
REI 120
CSI0619RF
BZ050REI120P015F2
2: L= 250- 400
H= 250- 600
1: L= 250- 515
H= 500-1460
min. area 0,25 m
a minimum 320
b minimum 300
c minimum 380
L = 250 - 515
H= 500 - 1460
min. area 0,25 m
a minimum 320
b minimum 300
b
* = main
leaf
L = 250 - 620
H= 250 - 400
a minimum 325
b minimum 300
* = main
leaf
REI 120
CSI0619RF
BZ050REI120P015F2
a minimum 325
b minimum 300
* = main
leaf
L = 250 - 620
H= 250 - 400
REI 120
CSI0460RF
BZ050REI120P007F1
REI 120
CSI0460RF
BZ050REI120P007F1
38
MODELS/CERTIFICATES
Proget REI 60 single-leaf doors
screw or expansion screw fixing
Wall opening
dimensions
Versions
Glass panel
dimensions
L = 600 - 1170
H= 1775 - 2275
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
L = 1004 - 1340
H= 2050 - 2500
Certificates /
Government approval
L = 850 - 1170
H= 1775 - 2275
L = 250 - 564
H= 250 - 443
L = 1004 - 1340
H= 2050 - 2500
a minimum 300
b minimum 300
L = 900 - 1170
H= 1775 - 2275
L = 1004 - 1340
H= 2050 - 2500
a minimum 300
b minimum 300
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
Versions
Glass panel
dimensions
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
* = main
leaf
a
*
39
Certificates /
Government approval
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
MODELS/CERTIFICATES
Proget REI 60 double-leaf doors
screw or expansion screw fixing
Versions
* = main
leaf
* = main
leaf
* = main
leaf
*
Wall opening
dimensions
Glass panel
dimensions
Certificates /
Government approval
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
a minimum 300
b minimum 300
a minimum 300
b minimum 300
a minimum 300
b minimum 300
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
Glass panel
dimensions
Certificates /
Government approval
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
REI 60
CSI1174FR
BZ050REI060P027F1
CSI1254FR
BZ050REI060P031
Versions
L = 600 - 1170
H= 1775 - 2275
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
L = 1004 - 1340
H= 2050 - 2500
L = 850 - 1170
H= 1775 - 2275
L = 250 - 564
H= 250 - 443
L = 1004 - 1340
H= 2050 - 2500
a minimum 300
b minimum 300
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
40
MODELS/CERTIFICATES
Proget REI 120 single-leaf doors
screw or expansion screw fixing
Versions
Wall opening
dimensions
Glass panel
dimensions
Certificates /
Government approval
L = 900 - 1170
H= 1775 - 2275
L = 1004 - 1340
H= 2050 - 2500
a minimum 300
b minimum 300
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
Versions
Glass panel
dimensions
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
* = main
leaf
* = main
leaf
41
Certificates /
Government approval
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
a minimum 300
b minimum 300
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
MODELS/CERTIFICATES
Proget REI 120 double-leaf doors
screw or expansion screw fixing
Versions
* = main
leaf
* = main
leaf
*
Wall opening
dimensions
Glass panel
dimensions
Certificates /
Government approval
a minimum 300
b minimum 300
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
a minimum 300
b minimum 300
REI 120
CSI1114RF
BZ050REI120P025F1
CSI1248RF
BZ050REI120P032F1
Glass panel
dimensions
Certificates /
Government approval
Versions
L = 546 - 1007
H= 1775 - 2150
REI 60
CSI0660RF
BZ050REI060P019F2
L = 864 - 1153
H= 1938 - 2363
L = 850 - 1007
H= 1775 - 2150
L = 250 - 400
H= 250 - 600
L = 864 - 1153
H= 1938 - 2363
a minimum 300
b minimum 300
REI 60
CSI0660RF
BZ050REI060P019F2
Wall opening
dimensions
L= 890(L1 540+L2 350)2000(L1 1000+L2 1000)
H= 1775 - 2150
L= 1707(L1 855,5+L2 851,5)2293(L1 1144,5+L2 1148,5)
H= 1938 - 2363
Glass panel
dimensions
Certificates /
Government approval
REI 60
CSI0660RF
BZ050REI060P019F2
42
MODELS/CERTIFICATES
Proget REI 60 double-leaf doors
Plasterboard partition
Versions
* = main
leaf
* = main
leaf
Wall opening
dimensions
Glass panel
dimensions
L = 250 - 400
H= 250 - 600
a minimum 300
b minimum 300
L = 250 - 400
H= 250 - 600
a minimum 300
b minimum 300
L = 250 - 400
H= 250 - 600
a minimum 300
b minimum 300
a
*
Certificates /
Government approval
REI 60
CSI0660RF
BZ050REI060P019F2
REI 60
CSI0660RF
BZ050REI060P019F2
REI 60
CSI0660RF
BZ050REI060P019F2
Versions
Glass panel
dimensions
L = 546 - 1007
H= 1775 - 2150
REI 120
CSI0636RF
BZ050REI120P017F2
L = 864 - 1153
H= 1938 - 2363
43
Certificates /
Government approval
L = 850 - 1007
H= 1775 - 2150
L = 250 - 400
H= 250 - 600
L = 864 - 1153
H= 1938 - 2363
a minimum 300
b minimum 300
REI 120
CSI0636RF
BZ050REI120P017F2
MODELS/CERTIFICATES
Proget REI 120 double-leaf doors
Plasterboard partition
Wall opening
dimensions
Versions
Glass panel
dimensions
REI 120
CSI0636RF
BZ050REI120P017F2
* = main
leaf
* = main
leaf
a
*
Certificates /
Government approval
L = 250 - 400
H= 250 - 600
a minimum 300
b minimum 300
L = 250 - 400
H= 250 - 600
a minimum 300
b minimum 300
L = 250 - 400
H= 250 - 600
a minimum 300
b minimum 300
REI 120
CSI0636RF
BZ050REI120P017F2
REI 120
CSI0636RF
BZ050REI120P017F2
REI 120
CSI0636RF
BZ050REI120P017F2
Wall opening
dimensions
L = 600 - 1170
H= 1775 - 2275
L = 1004 - 1340
H= 2050 - 2500
Glass panel
dimensions
Certificates /
Government approval
REI 60
CSI1218FR
BZ050REI060P029F1
44
MODELS/CERTIFICATES
Wall opening
dimensions
Glass panel
dimensions
L = 850 - 1170
H= 1775 - 2275
L = 250 - 564
H= 250 - 443
L = 1004 - 1340
H= 2050 - 2500
a minimum 300
b minimum 300
L = 900 - 1170
H= 1775 - 2275
L = 1004 - 1340
H= 2050 - 2500
a minimum 300
b minimum 300
Certificates /
Government approval
REI 60
CSI1218FR
BZ050REI060P029F1
REI 60
CSI1218FR
BZ050REI060P029F1
Versions
Glass panel
dimensions
REI 60
CSI1218FR
BZ050REI060P029F1
* = main
leaf
* = main
leaf
*
45
Certificates /
Government approval
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
REI 60
CSI1218FR
BZ050REI060P029F1
REI 60
CSI1218FR
BZ050REI060P029F1
REI 60
CSI1218FR
BZ050REI060P029F1
MODELS/CERTIFICATES
Proget REI 60 double-leaf doors
Application in plasterboard walls by means of clamp frame
Versions
* = main
leaf
* = main
leaf
*
Wall opening
dimensions
Glass panel
dimensions
a minimum 300
b minimum 300
a minimum 300
b minimum 300
a minimum 300
b minimum 300
Certificates /
Government approval
REI 60
CSI1218FR
BZ050REI060P029F1
REI 60
CSI1218FR
BZ050REI060P029F1
REI 60
CSI1218FR
BZ050REI060P029F1
Versions
Glass panel
dimensions
L = 600 - 1170
H= 1775 - 2275
REI 120
CSI1137RF
BZ050REI120P026F1
L = 1004 - 1340
H= 2050 - 2500
Certificates /
Government approval
L = 850 - 1170
H= 1775 - 2275
L = 250 - 564
H= 250 - 443
L = 1004 - 1340
H= 2050 - 2500
a minimum 300
b minimum 300
L = 900 - 1170
H= 1775 - 2275
L = 1004 - 1340
H= 2050 - 2500
a minimum 300
b minimum 300
REI 120
CSI1137RF
BZ050REI120P026F1
REI 120
CSI1137RF
BZ050REI120P026F1
46
MODELS/CERTIFICATES
Versions
Glass panel
dimensions
REI 120
CSI1137RF
BZ050REI120P026F1
* = main
leaf
* = main
leaf
* = main
leaf
* = main
leaf
*
47
Certificates /
Government approval
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
L = 250 - 564
H= 250 - 443
a minimum 300
b minimum 300
a minimum 300
b minimum 300
a minimum 300
b minimum 300
a minimum 300
b minimum 300
REI 120
CSI1137RF
BZ050REI120P026F1
REI 120
CSI1137RF
BZ050REI120P026F1
REI 120
CSI1137RF
BZ050REI120P026F1
REI 120
CSI1137RF
BZ050REI120P026F1
REI 120
CSI1137RF
BZ050REI120P026F1
REI 120
CSI1137RF
BZ050REI120P026F1
48
SPECIFICATIONS/SECTIONS
+15
External frame = FM H + 30
Vertical sections
Net passage = FM H - 40
N.B.
- Cylinder and weather stripping are supplied only upon request.
- Should the door be repainted the instructions outlined on the surface
treatment page must be followed.
- FFL = Finished floor level.
FFL
Net passage = FM L - 80
15
100
Horizontal sections
40
35
50
70
+20
External frame = FM L + 60
49
SPECIFICATIONS/SECTIONS
External frame = FM H + 30
N.B.
- Cylinder and weather stripping are supplied only upon request.
- Should the door be repainted the instructions outlined on the surface
treatment page must be followed.
- FFL = Finished floor level.
Opening left - double-leaf door (SX)
Opening right - double-leaf door (DX)
Secondary
Main Secondary
Main
leaf
leaf
leaf
leaf
Vertical sections
Net passage = FM H - 40
FFL
Net passage = FM L - 80
Net passage main leaf = L1 - 81
15
100
40
Horizontal sections
35
50
70
L2
L1
Wall opening (FM L)
+20
+10
External frame = FM L + 60
50
51
SPECIFICATIONS/SECTIONS
FFL
External frame = FM H + 30
Vertical sections
N.B.
- Cylinder, weather stripping and sub-frame are supplied only upon request.
- Should the door be repainted the instructions outlined on the surface
treatment page must be followed.
- FFL = Finished floor level.
50
Net passage = FM H - 40
1050
Net passage = FM L - 80
15
50
100
Horizontal sections
40
35
20
50
70
Wall opening (FM L)
Wall opening concealed frame = FM L + 50
External frame = FM L + 60
52
SPECIFICATIONS/SECTIONS
External frame = FM H + 30
+15
N.B.
- Cylinder and weather stripping are supplied only upon request.
- Should the door be repainted the instructions outlined on the surface treatment
page must be followed.
- FFL = Finished floor level.
Vertical sections
Net passage = FM H - 40
1050
FFL
Net passage = FM L - 80
15
100
Horizontal sections
40
35
50
70
+10
Wall opening (FM L) +20
External frame = FM L + 60
53
SPECIFICATIONS/SECTIONS
External frame = FM H + 30
+5
Wall opening (FM H) +15
N.B.
- Cylinder and weather stripping are supplied only upon request.
- Should the door be repainted the instructions outlined on the surface treatment
page must be followed.
- FFL = Finished floor level.
Vertical sections
Net passage = FM H - 40
1050
FFL
Net passage = FM L - 80
Floor catch set
15
100
40
Horizontal sections
35
50
70
L2
L1
Wall opening (FM L)
+20
+10
External frame = FM L + 60
54
SPECIFICATIONS/SECTIONS
External frame = FM H + 30
N.B.
- Cylinder and weather stripping are supplied only upon request.
- Should the door be repainted the instructions outlined on the surface treatment
page must be followed.
- FFL = Finished floor level.
Vertical sections
Net passage = FM H - 40
Proget REI 60 and REI 120 single-leaf doors screw or expansion screw fixing:
Galvanized steel-sheet door leaf with insulating-material core, without bottom
frame, total thickness 60 mm.
Angled insulated frame consisting of sheet steel profiles complete with connectors for
assembly on site, bottom spacers to be screwed, fixing holes on the strike profile.
Lock complete with cylinder bore and keyhole for patent keys.
Safety bolt in hinge-side leaf edge.
Black safety handle with steel core, supplied with plates, cylinder bore and keyholes
for patent keys.
2 hinges: one hinge with self-closing spring, one ball-bearing hinge with screws for
the vertical adjustment.
Strengthening plates inside door leaf for fastening door closer and emergency handle
if required.
Thermoexpanding gasket inserted in appropriate cavity in frame.
Identification plate on door edge.
Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish
- light pastel turquoise for door leaf (NCS4020-B50G), and a darker shade for the
frame (NCS5020-B50G). On request, powder coating in RAL or decorative NDD
Ninz Digital Decor can be applied for decorative or graphic elements. Surface
treatment of the door leaf is carried out using oven-baked epoxy-polyester powder
and graphic printing of the decoration on the flat side of the door leaf by means of
sprayed inks. The decoration is protected by transparent varnish. The finish can be
flat or beaten in accordance with the decoration selected.
For minimum and maximum dimensions possible please see page models/certificates.
600 - 1170 x 1775 - 2275
1004 - 1340 x 2050 - 2500
Sound insulation with automatic sill seal: REI 60 = 29,5 dB
REI 120 = 30 dB
Weight approx.: REI 60 37 kg/m2 wall opening.
REI 120 46 kg/m2 wall opening.
1050
FFL
Net passage = FM L - 80
15
100
Horizontal sections
40
35
50
70
Wall opening = (FM L)
External frame = FM L + 60
55
SPECIFICATIONS/SECTIONS
External frame = FM H + 30
Vertical sections
Net passage = FM H - 40
Proget REI 60 and REI 120 double-leaf doors screw or expansion screw fixing:
Galvanized steel-sheet door leaf with insulating-material core, without bottom
frame, total thickness 60 mm.
Angled insulated frame consisting of sheet steel profiles complete with connectors for
assembly on site, bottom spacers to be screwed, fixing holes on the strike profile.
Lock for main leaf, with cylinder bore and keyhole for patent keys.
Self-locking mechanism with built-in release lever on secondary door leaf.
Cavity for lock on secondary leaf also suitable for emergency-handle lock.
Safety bolt in hinge-side leaf edge.
Black safety handle with steel core, supplied with plates, cylinder bore and keyholes
for patent keys.
4 hinges, one per leaf with spring for the self-closing and one ball-bearing hinge with
screws for the vertical adjustment.
Closing regulator to ensure correct closing sequence.
Strengthening plates inside door leaf for fastening door closer and emergency handle
if required.
Thermoexpanding gasket inserted in appropriate cavity in frame and in the vertical
joint of leaves.
Floor catch set with 3 screws/dowels to fix on finished floor
Identification plate on door edge.
Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish
- light pastel turquoise for door leaves (NCS4020-B50G), and a darker shade for the
frame (NCS5020-B50G). On request, powder coating in RAL or decorative NDD
Ninz Digital Decor can be applied for decorative or graphic elements. Surface
treatment of the door leaves is carried out using oven-baked epoxy-polyester powder
and graphic printing of the decoration on the flat side of the door leaves by means of
sprayed inks. The decoration is protected by transparent varnish. The finish can be
flat or beaten in accordance with the decoration selected.
For minimum and maximum dimensions possible please see page models/certificates.
890 (540 + 350) - 2252 (1126 + 1126) x 1775 - 2275
1962 (996 + 996) - 2540 (1270 + 1270) x 2050 - 2500
Weight approx.: REI 60 ca. 35 kg/m2 wall opening.
REI 120 ca. 45 kg/m2 wall opening.
N.B.
- Cylinder and weather stripping are supplied only upon request.
- Should the door be repainted the instructions outlined on the surface treatment
page must be followed.
- FFL = Finished floor level.
1050
FFL
Net passage = FM L - 80
Floor catch set
15
100
40
Horizontal sections
35
50
70
L2
L1
Wall opening = (FM L)
External frame = FM L + 60
56
SPECIFICATIONS/SECTIONS
1050
1050
Horizontal sections
43
20
14
43
05-Silicone Seal
08
02-Rivet *
03-Fixing metal angle *
01-Self-tapping screw *
09
12
13
11
* supplied by NINZ
57
06
SPECIFICATIONS/SECTIONS
Plasterboard partition - Proget REI 60 doors
Fireproof doors PROGET REI 60 single or double door leaf prepared for fixing in plasterboard wall
consisting of :
Door leaves in beaten galvanized sheet, filled with insulation material, without bottom profile, total thickness 60 mm. Insulated
angled frame consisting of galvanised sheet steel profiles with connectors for assembly on site, bottom spacer to be screwed
and fixing holes on the wall. Lock seat including opening for cylinder and insert for patent key. Self blocking lock on the
secondary door leaf with a opening lever. The seat is also prepared for the application of hardware with an anti-panic handle.
Safety bolts in the door leaf. Black accident prevention handle with a steel core complete with a cover prepared with an
aperture for the cylinder and insert for patent key.
A pair of hinges, one for a door leaf with automatic closing spring and one fitted with a resistance bearing with vertical
adjustment screws.
Closing regulator to guarantee the correct closing sequence for double doors. Internal reinforcement of the door leaf to
accommodate possible fitting of door closers and anti-panic handles. Thermal expansion seal in the proper channel in the
frame and in the counter profile on the secondary door leaf.
Floor catch set with 3 screws/plugs to be installed on the finished floor. Consignment label with relevant information located
in the rebate of the principal door leaf.
Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish pastel turquiose lighter tone for the door
leaves (NCS4020-B50G), and a darker shade for the frame (NCS5020-B50G). On request, powder coating in RAL or
decorative NDD Ninz Digital Decor can be applied for decorative or graphic elements. Surface treatment of the door leaves
is carried out using oven-baked epoxy-polyester powder and graphic printing of the decoration on the flat side of the door
leaves by means of sprayed inks. The decoration is protected by transparent varnish. The finish can be flat or beaten in
accordance with the decoration selected. Door weight approx. 35 kg/m2 of wall opening. For minimum and maximum dimensions
possible please see page models/certificates.
Single door leaf 546 - 1007 x 1775 - 2150 Double door leaf 890 (540 + 350)-2000 (1000 + 1000) x 1775-2150
864 - 1153 x 1938 - 2363
1707 (855,5+851,5)-2293 (1144,5+1148,5) x 1938-2363
Cylinders and seals are only supplied on request. Orders are carried according to the RAL colour range outlined on the surface
treatment page.
Should the door be repainted the instructions outlined on the surface treatment page must be followed.
130
15
Vertical sections
09
12
08
43
06
09
58
SPECIFICATIONS/SECTIONS
1050
1050
Horizontal sections
43
8
20
12
63
07
06-Silicone seal
02-Self-tapping screw *
03-Rivet *
05-Self-tapping screw *
04-Fixing metal angle *
11
09
* supplied by NINZ
** optional supplied by NINZ
59
** Galvanised structure-01
SPECIFICATIONS/SECTIONS
Plasterboard partition - Proget REI 120 doors
Fireproof doors PROGET REI 120 single or double door leaf prepared for fixing in plasterboard wall
consisting of :
Door leaves in beaten galvanized sheet, filled with insulation material, without bottom profile, total thickness 60 mm. Insulated
angled frame consisting of galvanised sheet steel profiles with connectors for assembly on site, bottom spacer to be screwed
and fixing holes on the wall. Lock seat including opening for cylinder and insert for patent key. Self blocking lock on the
secondary door leaf with a opening lever. The seat is also prepared for the application of hardware with an anti-panic handle.
Safety bolts in the door leaf. Black accident prevention handle with a steel core complete with a cover prepared with an
aperture for the cylinder and insert for patent key.
A pair of hinges, one for a door leaf with automatic closing spring and one fitted with a resistance bearing with vertical
adjustment screws.
Closing regulator to guarantee the correct closing sequence for double doors. Internal reinforcement of the door leaf to
accommodate possible fitting of door closers and anti-panic handles. Thermal expansion seal in the proper channel in the
frame and in the counter profile on the secondary door leaf.
Floor catch set with 3 screws/plugs to be installed on the finished floor. Consignment label with relevant information located
in the rebate of the principal door leaf.
Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish pastel turquiose lighter tone for the door
leaves (NCS4020-B50G), and a darker shade for the frame (NCS5020-B50G). On request, powder coating in RAL or
decorative NDD Ninz Digital Decor can be applied for decorative or graphic elements. Surface treatment of the door leaves
is carried out using oven-baked epoxy-polyester powder and graphic printing of the decoration on the flat side of the door
leaves by means of sprayed inks. The decoration is protected by transparent varnish. The finish can be flat or beaten in
accordance with the decoration selected. Door weight approx. 46 kg/m2 for single leaf, double leaf doors approx. 45 kg/m2
of wall opening. For minimum and maximum dimensions possible please see page models/certificates.
Single leaf 546 - 1007 x 1775 - 2150
Double leaf 890 (540 + 350)-2000 (1000 + 1000) x 1775-2150
864 - 1153 x 1938 - 2363
1707 (855,5+851,5)-2293 (1144,5+1148,5) x 1938-2363
Cylinders and seals are only supplied on request. Orders are carried according to the RAL colour range outlined on the surface
treatment page.
Should the door be repainted the instructions outlined on the surface treatment page must be followed.
150
10
Vertical sections
09
11
07
11
43
07
60
SPECIFICATIONS/SECTIONS
1050
Allow space
between
frame and
cieling for
the screw
fixing of the
angles
15
Net passage = FM L - 80
15
Horizontal sections
50
70
Hole to prepare = FM L -25
Nominal / order dimensions wall opening (FM L)
External frame = FM L +60
61
Cylinder and weather stripping are supplied only on request. Should the door be repainted
the instructions outlined on the surface treatment page must be followed. FFL = Finished
floor level.
Plasterboard walls consisting of : metal mesh in galvanized steel with U guide profile
75 x 40 mm, vertical structural profiles in C form 75 x 47 mm (doubled against the door
frame), both sides and the frame profiles are covered with a single skin plasterboard
model KNAUF GKF AK fireproof with a thickness of 12,5 mm.
Vertical sections
100
PROGET REI 60 single leaf doors for clamp fitting prepared for fixing
in plasterboard wall consisting of:
Galvanized steel-sheet door leaf with insulating-material core, without bottom
frame, total thickness 60 mm.
Frame constructed of Insulated galvanized sheet steel clamp profiles with accessories
for assembly on site prepared with fixing holes and cover plugs.
Lock complete with cylinder bore and keyhole for patent keys.
Safety bolt in hinge-side leaf edge.
Black safety handle with steel core, supplied with plates, cylinder bore and keyholes
for patent keys.
2 hinges: one hinge with self-closing spring, one ball-bearing hinge with screws for
the vertical adjustment.
Strengthening plates inside door leaf for fastening door closer and emergency handle
if required.
Thermoexpanding gasket inserted in appropriate cavity in frame.
Identification plate on door edge.
Standard epoxy-polyester oven-baked powder coated with anti-scratch beaten finish
- light pastel turquoise for door leaf (NCS4020-B50G), and a darker shade for the
frame (NCS5020-B50G). On request, powder coating in RAL or decorative NDD
Ninz Digital Decor can be applied for decorative or graphic elements. Surface
treatment of the door leaf is carried out using oven-baked epoxy-polyester powder
and graphic printing of the decoration on the flat side of the door leaf by means of
sprayed inks. The decoration is protected by transparent varnish. The finish can be
flat or beaten in accordance with the decoration selected.
For minimum and maximum dimensions possible please see page models/certificates.
600 - 1170 x 1775 - 2275
1004 - 1340 x 2050 - 2500
Sound insulation with automatic sill seal: 29.5 dB
Weight approx. 37 kg/m2 wall opening.
SPECIFICATIONS/SECTIONS
Proget REI 60 double-leaf doors /
Application in plasterboard walls by means of clamp frame
1050
FFL
Vertical sections
100
Allow space
between
frame and
cieling for
the screw
fixing of the
angles
PROGET REI 60 double leaf doors for clamp fitting prepared for fixing
in plasterboard wall consisting of:
Galvanized steel-sheet door leaf with insulating-material core, without bottom
frame, total thickness 60 mm.
Frame constructed of Insulated galvanized sheet steel clamp profiles with accessories
for assembly on site prepared with fixing holes and cover plugs.
Lock for main leaf, with cylinder bore and keyhole for patent keys.
Self-locking mechanism with built-in release lever on secondary door leaf.
Cavity for lock on secondary leaf also suitable for emergency-handle lock.
Safety bolt in hinge-side leaf edge.
Black safety handle with steel core, supplied with plates, cylinder bore and keyholes
for patent keys.
4 hinges, one per leaf with spring for the self-closing and one ball-bearing hinge with
screws for the vertical adjustment.
Closing regulator to ensure correct closing sequence.
Strengthening plates inside door leaf for fastening door closer and emergency handle
if required.
Thermoexpanding gasket inserted in appropriate cavity in frame and in the vertical
joint of leaves.
Floor catch set with 3 screws/dowels to fix on finished floor
Identification plate on door edge.
Epoxy-polyester oven-baked powder coated with anti-scratch beaten finish - light
pastel turquoise for door leaves (NCS4020-B50G), and a darker shade for the frame
(NCS5020-B50G). On request, powder coating in RAL or decorative NDD Ninz
Digital Decor can be applied for decorative or graphic elements. Surface treatment
of the door leaves is carried out using oven-baked epoxy-polyester powder and
graphic printing of the decoration on the flat side of the door leaves by means of sprayed inks.
The decoration is protected by transparent varnish. The finish can be flat or beaten
in accordance with the decoration selected.
For minimum and maximum dimensions possible please see page models/certificates.
890 ( 540 + 350) - 2252 (1126 + 1126) x 1775 - 2275
1962 ( 996 + 996) - 2540 (1270 + 1270) x 2050 - 2500
Weight approx. ca. 35 kg/m2 wall opening.
Cylinder and weather stripping are supplied only on request.
Should the door be repainted the instructions outlined on the surface treatment page
must be followed. FFL = Finished floor level.
Plasterboard walls consisting of : metal mesh in galvanized steel with U guide profile
75 x 40 mm, vertical structural profiles in C form 75 x 47 mm (doubled against the door
frame), both sides and the frame profiles are covered with a single skin plasterboard
model KNAUF GKF AK fireproof with a thickness of 12,5 mm.
15
Net passage = FM L - 80
Floor catch set
15
Horizontal sections
50
70
L1
Nominal / order dimensions wall opening (FM L)
External frame = FM L +60
62
SPECIFICATIONS/SECTIONS
15
1050
Net passage = FM L - 80
15
Horizontal sections
50
70
Hole to prepare = FM L -25
Nominal / order dimensions wall opening (FM L)
External frame = FM L +60
63
FFL
Vertical sections
125
Allow space
between
frame and
cieling for
the screw
fixing of the
angles
PROGET REI 120 single leaf doors for clamp fitting prepared for fixing
in plasterboard wall consisting of:
Galvanized steel-sheet door leaf with insulating-material core, without bottom
frame, total thickness 60 mm.
Frame constructed of Insulated galvanized sheet steel clamp profiles with accessories
for assembly on site prepared with fixing holes and cover plugs.
Lock complete with cylinder bore and keyhole for patent keys.
Safety bolt in hinge-side leaf edge.
Black safety handle with steel core, supplied with plates, cylinder bore and keyholes
for patent keys.
2 hinges: one hinge with self-closing spring, one ball-bearing hinge with screws for
the vertical adjustment.
Strengthening plates inside door leaf for fastening door closer and emergency handle
if required.
Thermoexpanding gasket inserted in appropriate cavity in frame.
Identification plate on door edge.
Epoxy-polyester oven-baked powder coated with anti-scratch beaten finish - light
pastel turquoise for door leaf (NCS4020-B50G), and a darker shade for the frame
(NCS5020-B50G). On request, powder coating in RAL or decorative NDD Ninz
Digital Decor can be applied for decorative or graphic elements. Surface treatment
of the door leaf is carried out using oven-baked epoxy-polyester powder and graphic
printing of the decoration on the flat side of the door leaf by means of sprayed inks.
The decoration is protected by transparent varnish. The finish can be flat or beaten
in accordance with the decoration selected.
For minimum and maximum dimensions possible please see page models/certificates.
600 - 1170 x 1775 - 2275
1004 - 1340 x 2050 - 2500
Sound insulation with automatic sill seal: 30dB
Weight approx. 46 kg/m2 wall opening.
Cylinder and weather stripping are supplied only upon request.
Should the door be repainted the instructions outlined on the surface treatment page
must be followed. FFL = Finished floor level.
Plasterboard walls consisting of : metal mesh in galvanized steel with U guide profile
75 x 40 mm, vertical structural profiles in C form 75 x 47 mm (doubled against the door
frame), both sides and the frame profiles are covered with a single skin plasterboard
model KNAUF GKF AK fireproof with a thickness of 12,5 mm.
SPECIFICATIONS/SECTIONS
Proget REI 120 double-leaf doors /
Application in plasterboard walls by means of clamp frame
1050
FFL
Vertical sections
125
15
Allow space
between
frame and
cieling for
the screw
fixing of the
angles
PROGET REI 120 double leaf doors for clamp fitting prepared for fixing
in plasterboard wall consisting of:
Galvanized steel-sheet door leaf with insulating-material core, without bottom
frame, total thickness 60 mm.
Frame constructed of Insulated galvanized sheet steel clamp profiles with accessories
for assembly on site prepared with fixing holes and cover plugs.
Lock for main leaf, with cylinder bore and keyhole for patent keys.
Self-locking mechanism with built-in release lever on secondary door leaf.
Cavity for lock on secondary leaf also suitable for emergency-handle lock.
Safety bolt in hinge-side leaf edge.
Black safety handle with steel core, supplied with plates, cylinder bore and keyholes
for patent keys.
4 hinges, one per leaf with spring for the self-closing and one ball-bearing hinge with
screws for the vertical adjustment.
Closing regulator to ensure correct closing sequence.
Strengthening plates inside door leaf for fastening door closer and emergency handle
if required.
Thermoexpanding gasket inserted in appropriate cavity in frame and in the vertical
joint of leaves.
Floor catch set with 3 screws/dowels to fix on finished floor
Identification plate on door edge.
Epoxy-polyester oven-baked powder coated with anti-scratch beaten finish - light
pastel turquoise for door leaves (NCS4020-B50G), and a darker shade for the frame
(NCS5020-B50G). On request, powder coating in RAL or decorative NDD Ninz
Digital Decor can be applied for decorative or graphic elements. Surface treatment
of the door leaves is carried out using oven-baked epoxy-polyester powder and graphic
printing of the decoration on the flat side of the door leaves by means of sprayed inks.
The decoration is protected by transparent varnish. The finish can be flat or beaten
in accordance with the decoration selected.
For minimum and maximum dimensions possible please see page models/certificates.
890 (540 + 350) - 2252 (1126 + 1126) x 1775 - 2275
1962 (996 + 996) - 2540 (1270 + 1270) x 2050 - 2500
Weight approx. 45 kg/m2 wall opening.
Cylinder and weather stripping are supplied only upon request. Should the door be
repainted the instructions outlined on the surface treatment page must be followed.
FFL = Finished floor level.
Plasterboard walls consisting of : metal mesh in galvanized steel with U guide profile
75 x 40 mm, vertical structural profiles in C form 75 x 47 mm (doubled against the door
frame), both sides and the frame profiles are covered with a single skin plasterboard
model KNAUF GKF AK fireproof with a thickness of 12,5 mm.
Net passage = FM L - 80
Floor catch set
15
Horizontal sections
50
70
64
DIMENSIONS
Proget single-leaf doors
65
2000
2000
2000
2000
width
720
820
920
1220
NET PASSAGE
height
1960
1960
1960
1960
800
900
1000
1200
1300
1340
2050
2050
2050
2050
2050
2050
720
820
920
1120
1220
1260
2010
2010
2010
2010
2010
2010
860
960
1060
1260
1360
1400
2080
2080
2080
2080
2080
2080
800
900
1000
1200
1300
1340
2150
2150
2150
2150
2150
2150
720
820
920
1120
1220
1260
2110
2110
2110
2110
2110
2110
860
960
1060
1260
1360
1400
2180
2180
2180
2180
2180
2180
width +20
+10
height +15
+5
800
900
1000
1300
EXTERNAL FRAME
width
height
860
2030
960
2030
1060
2030
1360
2030
DIMENSIONS
Proget single-leaf doors
Single-leaf SEMISTANDARD doors
WALL OPENING
+20
width +10
+15
height + 5
min.
max.
2000
795
500 546
2000
895
805
2000
995
905
NET PASSAGE
width
min.
max.
715
420 466
815
725
915
825
1960
1960
1960
EXTERNAL FRAME
width
height
min.
max.
2030
855
560 606
2030
955
865
2030
1055
965
height
500 546
805
905
795
895
995
2050
2050
2050
420 466
725
825
715
815
915
2010
2010
2010
560 606
865
965
855
955
1055
2080
2080
2080
500 546
805
905
795
895
995
2150
2150
2150
420 466
725
825
715
815
915
2110
2110
2110
560 606
865
965
855
955
1055
2180
2180
2180
66
DIMENSIONS
Proget double-leaf doors
+20
+10
height
+15
+5
LEAF DIVISION
main L1
second. L2
NET PASSAGE
width
main
719
719
719
819
819
819
919
919
919
719
819
819
919
919
919
EXTERNAL FRAME
height
width
height
1960
1960
1960
1960
1960
1960
1960
1960
1960
1960
1960
1960
1960
1960
1960
1210
1260
1310
1310
1360
1410
1410
1460
1510
1660
1760
1860
1860
1960
2060
2030
2030
2030
2030
2030
2030
2030
2030
2030
2030
2030
2030
2030
2030
2030
1150
1200
1250
1250
1300
1350
1350
1400
1450
1600
1700
1800
1800
1900
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
800
800
800
900
900
900
1000
1000
1000
800
900
900
1000
1000
1000
350
400
450
350
400
450
350
400
450
800
800
900
800
900
1000
total
1070
1120
1170
1170
1220
1270
1270
1320
1370
1520
1620
1720
1720
1820
1920
1150
1200
1250
1250
1300
1350
1350
1400
1450
1600
1700
1800
1800
1900
2000
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
800
800
800
900
900
900
1000
1000
1000
800
900
900
1000
1000
1000
350
400
450
350
400
450
350
400
450
800
800
900
800
900
1000
1070
1120
1170
1170
1220
1270
1270
1320
1370
1520
1620
1720
1720
1820
1920
719
719
719
819
819
819
919
919
919
719
819
819
919
919
919
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
2010
1210
1260
1310
1310
1360
1410
1410
1460
1510
1660
1760
1860
1860
1960
2060
2080
2080
2080
2080
2080
2080
2080
2080
2080
2080
2080
2080
2080
2080
2080
1150
1200
1250
1250
1300
1350
1350
1400
1450
1600
1700
1800
1800
1900
2000
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
800
800
800
900
900
900
1000
1000
1000
800
900
900
1000
1000
1000
350
400
450
350
400
450
350
400
450
800
800
900
800
900
1000
1070
1120
1170
1170
1220
1270
1270
1320
1370
1520
1620
1720
1720
1820
1920
719
719
719
819
819
819
919
919
919
719
819
819
919
919
919
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
2110
1210
1260
1310
1310
1360
1410
1410
1460
1510
1660
1760
1860
1860
1960
2060
2180
2180
2180
2180
2180
2180
2180
2180
2180
2180
2180
2180
2180
2180
2180
67
DIMENSIONS
Proget double-leaf doors
Double-leaf SEMISTANDARD doors
WALL OPENING
+20
+15
width +10
height +5
min.
max.
2000
2000
850 890
LEAF DIVISION
main L1
secondary L2
min.
max.
min.
max.
500 540
1000
350
1000
NET PASSAGE
total width
min.
max.
770 810
1920
height
850 890
2000
2050
500 540
1000
350
1000
770 810
1920
2010
850 890
2000
2150
500 540
1000
350
1000
770 810
1920
2110
1960
NET PASSAGE
width
height
min.
max.
min.
max.
770 810 2460 760 1735 2630
68
POSITIONS OF BRACKETS
Proget doors to be set by mortar
675
Wall opening (FM H)
FFL
270
Single-leaf door
FM L= 500-1035 x FM H=1750-2200
875
80
200
Single-leaf door
FM L=500-1340 x FM H=2201-2670
FM L=1036-1340 x FM H=1750-2200
Wall opening (FM L)
FM L
-30
2
275
270
FFL
69
285
200
80
200
80
285
275
FFL
270
Single-leaf door
FM L= 500-1340 x FM H= 800-1749
275
1/2
285
875
FFL
270
FFL
200
80
200
80
1/2
270
1/2
285
1/2
285
POSITIONS OF BRACKETS
Proget doors to be set by mortar
Wall opening (FM L)
875
270
FFL
FFL
270
875
200
80
200
80
285
285
FM L
-30
2
FM L
-30
2
275
275
285
675
200
FFL
270
875
80
875
FFL
275
285
200
80
675
275
FM L
-30
2
70
ENCUMBRANCES
Proget single-leaf doors
40
80
175
X = FM L +27
Y = FM L -200
A emergency handle TWIST = 100
A emergency handle SLASH = 75
A emergency handle TAURUS INOX = 130
A emergency handle TOUCH BAR = 74
Height of handle see page Specifications/Sections
20
25
X = FM L -7
Y = FM L -233
Height of handle see page Specifications/Sections
71
80
40
280
ENCUMBRANCES
Proget double-leaf doors
Wall opening (FM L)
40
A
40
130
max.
175
X = L1 +35
Y = L2 +75
Z = L1 -193
A emerg. handle TWIST = 100
A emerg. handle SLASH = 75
A emerg. handle TAURUS INOX =130
A emerg. handle TOUCH BAR = 74
Height of handle see page
Specifications/Sections
31
80
20
80
280
40
25
175
31
130
max.
Y
X = L1 +1
Y = L2 +42
Z = L1 -226
Height of handle see page Specifications/Sections
72
ACCESSORIES
Handle for Proget doors
M1
70
M2
135
M3
emergency handle
M4
M5
M9
M 11
M 14
M 20
* HOT CIL
All doors are fitted with M1 black plastic handles with steel core. The alternative versions illustrated above can be supplied
at request. Handles are classified as accessories and are supplied not installed. The handles M1, M2, M3, M4 and
M20 can also be supplied in stainless steel with a satin finish and rounded cover plate.
The models M2, M4, M5, M9 e HOT CIL can not be combined with three point locks.
* Handle to combine with pull anti-panic lock for hotel rooms.
73
ACCESSORIES
Emergency handles for Proget doors
TAURUS INOX (TX)
100
TW BS
TW BM
TX BM
TW BSP
TX BSP
210
200
TWIST (TW)
38
36
TW BMC
70
130
TW BC
TW B
TX B
TW A
TX A
for second.
leaf
SLASH (SL)
SL BM
75
SL BC
SL B
SL BSP
SL BS
SL BMC
70
SL A
SL AR
for second.
leaf
for second.
leaf
PL SL
Holes-cover plate
Emergency Twist (TW) and Slash (SL) handles, with lock inside door leaf, two control boxes with plastic rods and steel core,
black, bar in natural anodized aluminium. Versions available: BM - BSP - BS - BMC - BC and B suitable for single-leaf
doors or main leaves.
The version A emergency handle is suitable only for use with secondary door leaves without external operation; the locking
mechanism consisting of upper and lower closing rods and the appropriate lock are hidden out of sight inside the secondary
leaf.
Secondary leaves with dimension L2 > 350 and < 500 can be fitted with handle SL AR with reduced control box. Emergency
handles are supplied not installed, leaves prepared. The holes cover plate has to be ordered seperately.
Anti-panic handles Taurus stainless stell (TX), with lock on the interior side of the door leaf, two control boxes and bar
in stainless steel and steel core. Models BM BSP and B to be applied on single leaf doors or principal door leaves, model
A is only appropriate for secondary door leaves with no external function.
The models TW BSP, TW BS, TX BSP, SL BSP e SL BS can not be combined with three point locks.
74
GLASS PANELS
Proget MULTIPURPOSE doors
(FM L/L1/L2)
min. 800
(FM L/L1/L2)
min. 900
A = 1350 FM H 2050-2149
A = 1450 FM H 2150
200
min.
A
Glass
(FM L/L1/L2)
min. 300
5 mm
6,5 mm
6,5 mm
8 mm
6 mm
Vertical
section
Hinge side
Horizontal section
50
min. 300
min. 250
Glass dimensions (MV)
min. 300
A = 550 FM H 2050-2149
A = 650 FM H 2150
(FM L / L1 / L2)
(FM L/L1/L2)
min. 900
A = 1150 FM H 2050-2149
A = 1250 FM H 2150
300
min.
min. 300
300
min.
min. 300
300
min.
Concealment
frame = Optional
Glass dim. L x H
Wall opening
Multipurpose rectangular window.
75
16.5
15
Glass dim.
Wall opening
Multipurpose circular window
(FM L/L1/L2)
(FM L/L1/L2)
d / H
1500
11
38
1600
Glass
Hinge side
Vision panel for single and double leaf PROGET doors made with rubber EPDM outer profile black colour and laminated
3+3 transparent safety glass.
Hinge side
Steel louvre
Hinge side
Hinge side
76
GLASS PANELS
Proget REI 60 and REI 120 doors
300
min.
300
min.
(FM L / L1 / L2)
(FM L / L1 / L2)
min.300
Glass
300
min.
A = 1150 FM H 2050-2149
A = 1250 FM H 2150
300
min.
A = 1350 FM H 2050-2149
A = 1450 FM H 2150
(FM L / L1 / L2)
(FM L / L1 / L2)
FM L / L1 / L2
FM H = 2050-2149
FM H 2150
Glass 300
min. 900
A = 1600
A = 1600
Glass 400
min. 1000
A = 1550
A = 1600
A = 550 FM H 2050-2149
A = 650 FM H 2150
If requested rectangular glass (REI 60 or REI 120) panels with screw-in holding frames may be fitted to both single- and doubleleaf firedoors. Dimensions may be standard, as illustrated above, or else to order, with regard to the dimensional limitations
of this glass the dimensions of the edge should also be taken into consideration in accordance with the specifications on the
models/certificates page of current catalogue. The term edge refers to the distance between the structural opening of the
door and the glass in its frame. The glass panels are supplied mounted and sealed. Circular windows can be applied to doors
prepared for screw fixing and those fitted with clamp frames for installation in plasterboard walls. For trouble-free operation
we recommend the fitting of a door closer to all doors containing glass panels of more than 0,25 m2 surface area.
The fitting of a door closer is compulsory if the result of the following formulae is exceeded:
door width x door height x 35 + (width x height window x 17) * = max. 140 for REI 60 doors
door width x door height x 45 + (width x height window x 84) ** = max. 140 for REI 120 doors
The values to be entered in the calculation table are lineal metres
For circular windows insert the following values :
* for circular windows 300 = 2, for circular windows 400 = 3; for doors REI 60
** for circular windows 300 = 6, for circular windows 400 = 10; for doors REI 120
The dimensions of glass panels have to be re-considered when used together with SLASH emergency handles.
Caution: REI glass panels become opaque if exposed to the sun-rays or other atmospheric agents,
both during storing and installation.
Fire rated glass, due to its production process, may have some aesthetic defects which cannot be
claimed by the customer.
77
SECTIONS-GLASS PANELS
Proget REI 60 and REI 120 doors
50
50
15
15
Edge
Glass. dim. L x H
Edge
Wall opening
Glass. dim. L x H
Wall opening
53.5
53.5
16.5
16.5
Edge
Glass. dim. d
Wall opening
Edge
Glass. dim. d
Wall opening
78
ACCESSORIES
Door closer and carrier arm for Proget doors
CP1 rack-operated over-head
door closer with dual regulation,
for closing speed and for closing
impact. Colour silver. Tension
adjustable from 3 to 4.
CP1
approx. 290
51
CP2 rack-operated over-head
door closer with rail and closingspeed regulation. Colour silver.
Strenght EN 4.
CP2 CP2-EMF
Doors ordered with CP2 are supplied with holes for the application
of a door closer on the door leaf
and guide rail on the frame, the
accessories themselves are supplied
packed for installation on site.
Doors ordered with door closers
are supplied prepared, both on
leaf and frame. Door closers are
classified as accessories and are
supplied not installed.
52
ary
Secondf
lea
Main
leaf
Carrier arm
79
ACCESSORIES
Horizontal section
RC/STD closing regulator (sequencer) with built-in impact damper for double-leaf doors. Inserted in weather stripping cavity
in frame head.
RC2 - RC2-EMF1
Horizontal section
RC2 closing regulator, complete set of 2 CP2 rack-operated door closers with control system incorporated in rail. Minimum
wall opening 1200 mm. Colour silver. Strenght EN 4.
Doors ordered with closing regulators are supplied prepared both on leaf and frame.
Closing regulators are classified as accessories and are supplied not installed.
Closing system RC2-EMF1 has, compared to RC2, an electro-meccanical blocking device which enables the blocking of the
door leaf in the open position.
NB. The blocking point of principal door leaf can be regulated at any position up to 150, at the same time the secondary
leaf can be regulated from 80 to 130 max.
80
ACCESSORIES
Special accessories for Proget doors
FF black rubber weather stripping to
be inserted into the special cavity
provided on the frame and on the
central jamb of the secondary leaf in
the case of double-leaf doors. Supplied
only on request and in loose rolls for
cutting and fitting on site.
40
40
40
10
230
230
37
15
29
26
81
FRAME EXTENSIONS/APPLICATIONS
Proget doors
Wall covering galvanized steel glass holding frame parts
IM (1) which can be assembled with a 45 degree corner
joint, with a thickness of 15/10 mm. Thermally powder
coated with epoxy polyester with an anti-scratch beaten
finish dark pastel turquiose tone (NCS5020-B50G), or
RAL finish on request.To be fixed with screws and plugs.
Fixing holes prepared on request however delivery is
without the necessary screws and plugs. Fireproof doors
can be walled and screw fixed.
73
Wall covering galvanized steel glass holding frame parts
IM (2) which can be assembled with a 45 degree corner
joint, with a thickness of 15/10 mm. Thermally powder
coated with epoxy polyester with an anti-scratch beaten
finish dark pastel turquiose tone (NCS5020-B50G), or
RAL finish on request.To be fixed with screws and plugs.
Fixing holes prepared on request however delivery is
without the necessary screws and plugs. For multi-use
doors the fixing holes must be prepared by the customer.
We recommend this combination with a closing seal on
the finished floor.
70
Wall covering galvanized steel glass holding frame parts
IM (4) which can be assembled with a 90 degree corner
joint, with a thickness of 15/10 mm. Thermally powder
coated with epoxy polyester with an anti-scratch beaten
finish dark pastel turquiose tone (NCS5020-B50G), or
RAL finish on request.To be fixed with screws and plugs.
Fixing holes prepared on request however delivery is
without the necessary screws and plugs. Fireproof doors
and multi-use doors prepared for screw fixing.
We recommend this combination with a closing seal on
the finished floor.
73
Embracing frame made of galvanized steel-sheet
profile, with a thickness of 15/10 mm for single and
double leaf PROGET multipurpose door. Supplied in 3
pieces with 45 cutted corners to join with screws, finishing
with powder coatings, nylon wrapping. Indicate the wall
type and the wall thickness in the order form (from 100
to 400mm).
Order dimensions
12.5
20
50
82
SURFACE FINISHING
Proget doors
Doors are supplied with paint finish
as described herein. The paint is particularly hard-wearing and is characterized by its attractive finish. It is
suitable for indoor use. The standard
colours of the frame and the door
leaf are approximately those illustrated
at side. For repainting proceed as
follows:
- sand and dust off the surfaces
thoroughly
- give a base coat of opaque beige
0059(made by ALCEA of Milan)
2-component epoxy paint EPOX
5203
- repaint the surfaces with the
enamel or paint selected
The door must not be exposed to atmospheric agents.
The colour fades when exposed to direct sunlight.
RAL 9011
RAL 8011
RAL 7038
RAL 7035
RAL 7024
RAL 6005
RAL 6000
RAL 5024
RAL 5010
RAL 3000
RAL 1015
RAL 1003
RAL 9018
RAL 9002
RAL 9001
RAL 1013
RAL 9010
83
DETECTORS/ELECTROMAGNETS
The C1 power and control device supplies a 24 V power feed to the electromagnets that hold the fire doors
open. If an alarm is generated by the associated smoke and heat detector, the device switches off this feed to
release the doors. The system can be reset either automatically of manually, by pressing the reset button once
the alarm condition is eliminated. The C1 power and control device can work with up to six EM or EMP
electromagnets and 20 RFC* smoke and heat detectors. It can also drive an external alarm siren. The device
can be connected to an external backup battery. The C1 control device is certified according to the electromagnetic
compatibility and electrical safety standards application. ABS box in beige colour for wall fixing.
150
50
56
53
65
35
70
EMP
53
65
65
24Vdc
60mA
550N
CE
104
114
Power source:
Absorption:
Retention strength:
Marked:
126
75
EM
24Vdc
60mA
550N
CE
RFC*
90
Power source:
Absorption:
Retention strenght:
Marked:
230Vac 50Hz
24Vdc
500mA
IP30
24Vdc (27.6Vdc)
Green LED
Red LED
Yellow LED
Internal buzzer
Intermittent internal buzzer
RFC* smoke and heat detector without ionization chamber or any other system liable
to emit radiation, with white coloured plastic box. The detector is designed to measure
rapid increases in temperature (>10C) in the warm air that flows horizontally across
the ceiling. The detector should be located where there are normally no strong
draughts. The RFC* smoke and heat detector is certified to UNI EN 54-7 standard.
Operating voltage:
10.5V 33V, typically 24V
Standby consumption:
62A - 70A, typically 65A
Fixed activation temperature:
54C - 65C, typically 60C
Operating temperature range:
-0C+70C
Max. relative humidity:
95%
Warning signal:
Red LED
EM wall-mounted electro-magnet with
white plastic casing, complete with
release button. Anchor made of nickle
iron plates with a hinged base.
24
65
Power supply:
Control voltage:
Max. output current:
Protection rating:
Backup battery charge output:
Power on signal:
Alarm signal:
Fault signal:
Acoustic alarm:
Low Battery warning:
C1
84
The SCA ACCESS CONTROL SYSTEM (12 Vdc) can be used on single leaf doors or on main leaf of double
leaf doors.
The door supplied with SCA system has a lock (antipanic or normal) with a built-in solenoid, electric contacts
frame/leaf and wiring from the lock to the electric contact of the leaf.
05
04
03
02
05
02
04
01
Lock SCA
Wiring
Electric Contacts
Activation device (to order)
Current line (by client)
H std. = 850
03
01
02
03
04
05
85
01
TW BM
TX BM
SL BM
M3
ACCESSOIRES TO ORDER
Release switch
Electronic board
with timer for the
release switch
Keyboard
Control system
with cards
Power source
switching (controls
max. 5 point lock
SCA 550mA)
CONNECTION PLAN
Lock SCA
*
Technical data for SCA electric locks:
Power source 12 Vdc 1V (13 Vdc max / 590 mA)
Absorbtion 550 mA
Touch digital
access
Electric contacts
Entering tension
12 Vdc
86
TWIST ELM
225
38
67
SLASH ELM
87
88
DRAW. A
01
DRAW. B
01
A-A
A
03
03
04
02
05
02
07
approx. 920
07
08
06
Controlled opening system with anti-panic crossbar (Drawing A) or with handle (Drawing B).
The door is kept closed by the electromagnet and by the tongue of the lock. Opening from outside by means of magnetic
card and by moving back the tongue with handle or with key. From inside the electromagned is released by a button (also
remote), a microswitch inserted in the antipanic crossbar or also by a magnetic card, the tongue of lock must be moved back
(with crossbar, handle or key). 01 holding electromagnet 300 kg.complete of joined anchoring and (08) fastening
plate; 02 Control system with programming cards; 03 AC/DC Converter 220V/12V; 04 Release switch; 05 TW or SL equipped
with microswitch; 06 Wire tube in nickel-plated brass; 07 Simple magnetic coded card;
89
MULTIPURPOSE DOORS
REVER
PAGE
90
91
92
93-94
95
96
Ninz company maintains the right to introduce technical modifications any time without notice.
All dimensions expressed in mm.
Rever doors are normally installed to compartmentalize the inside of buildings and are built for that
purpose.
90
SPECIFICATIONS/SECTIONS
Rever MULTIPURPOSE single-leaf doors
Rever MULTIPURPOSE single-leaf doors consisting of:
Galvanised steel-sheet door leaf, filler of rigid honey-comb
fibre structure, total thickness 39 mm.
Assembled corner frame made of profiled galvanised steelsheet prepared for installation with brackets or bolts.
Lock with cylinder bore and plastic key-hole for patent key
included.
Black colour safety-shaped handle fitted at a height of
approx. 1075/1125 (FM H 2050/FM H 2150) above the
finished floor.
2 pcs. Bearing hinges and 3 safety bolts on hinge side.
Painted with epoxy-polyester oven-baked powder paint
with anti-scratch goffered finish - light pastel turquoise for
door leaves (NCS4020-B50G), and a darker shade for the
frame (NCS5020-B50G). On request, powder coating in
RAL or decorative NDD Ninz Digital Decor can be
applied for decorative or graphic elements. Surface
treatment of the door leaf is carried out using oven-baked
epoxy-polyester powder and graphic printing of the
decoration on the flat side of the door leaf by means of
sprayed inks. The decoration is protected by transparent
varnish. The finish can be flat or beaten in accordance with
the decoration selected.
Reversible door for opening right or left with bottom frame
adaptable to floor or detachable for use without bottom
frame.
All Rever doors are prepared to receive a three-point
closing device (Kit Secur).
FFL
Horizontal Sections
44
Net passage = FM L - 74
91
32
External frame = FM H + 8
Net passage = FM H - 40
Vertical Sections
SPECIFICATIONS/SECTIONS
Rever MULTIPURPOSE double-leaf doors
FFL
32
External frame = FM H + 8
Net passage = FM H - 40
Vertical Sections
Horizontal Sections
Net passage = FM L - 74
NP main leaf = L1 - 74
44
L2
L1
Wall opening (FM L)
External frame = FM L + 22
NB.
To request the doors can be supplied in
different RAL tones, combined with antipanic crossbars, door-closers, ventilation
holes, louvers, frame extensions or special
casings.
92
ACCESSORIES
Rever MULTIPURPOSE doors
1500
1500
1600
1600
Sections
glass panels
25
Vision panel for single and double leaf REVER doors made
with rubber EPDM outer profile black colour and laminated
3+3 transparent safety glass. Opening direction of door
necessary.
15
Closing point
93
ACCESSOIRES
Rever MULTIPURPOSE doors
Series TWIST
TAURUS
INOX
TW BM
TW BSP
TW BS
TW BMC
TW BC
TW A
Series SLASH
SL BM
SL BSP
SL BS
SL BMC
SL BC
SL A
approx. 290
51
H std. = 850
94
ADDITIONS
Rever MULTIPURPOSE doors
Hole to prepare
Order dimension
Net passage
28
15
approx. 32
Wall thickness
10 *
70
Hole to prepare
20
Wall thickness
Order dimension
Net passage
15
approx. 32
60
Hole to prepare
Net passage
28
15
approx. 32
Wall thickness
10 *
Order dimension
Wall opening
48
Wall thickness
Net passage
approx. 15
70
95
RAL9010
RAL1013
RAL9001
RAL9002
RAL 9018
RAL1003
RAL 1015
RAL3000
RAL5010
RAL5024
RAL6000
RAL6005
RAL7024
RAL7035
RAL7038
RAL8011
Serial colour
Colours always available
(For printing reasons the colours might not be like the original ones)
RAL9011
Other RAL tones upon request: RAL1001-RAL1007-RAL1014-RAL1021-RAL1023-RAL1033-RAL2010-RAL3003-RAL3004-RAL3009-RAL3011-RAL3020-RAL5000RAL5002-RAL5003-RAL5005-RAL5007-RAL5008-RAL5009-RAL5011-RAL5012-RAL5013-RAL5014-RAL5015-RAL5017-RAL6011-RAL6012-RAL6016-RAL6018-RAL6019RAL6028-RAL6029-RAL7001-RAL7004-RAL7011-RAL7016-RAL7022-RAL7030-RAL7032-RAL7036-RAL7037-RAL7040-RAL7042-RAL7046-RAL7047-RAL8014-RAL8017RAL8019-RAL8023-RAL9005
RAL-tones for outside use: RAL1001-RAL1003-RAL1013-RAL1021-RAL1023-RAL3000-RAL3012-RAL3013-RAL5010-RAL5011-RAL5014-RAL6000-RAL6005-RAL6018RAL6028-RAL7001-RAL7012-RAL7022-RAL7024-RAL7032-RAL7035-RAL7036-RAL7037-RAL8017-RAL9001-RAL9002-RAL9010-NCS4020-NCS5020
We recommend the use of water and neutral soap. Do not use cleaning fluids or other solvents. We do not accept responsibility for future
complaints should these recommendations not be adhered to.
FFL
175 FM L -221
37
Side-part. min. 40
L1
L1 -4
(FM L)
L2
L2 +42
Side-part. min. 40
175 L1 -221
A
160
80
FM H
-8
2
180
80
160
215
FFL
FM H -8
2
180
223
215
FFL
215
FM H -50
2
200
80
160
37
47
75
L2 +56
L1 +11
175 L1-206
FM L +11
175 FM L -206
50
75
96