Beruflich Dokumente
Kultur Dokumente
V100R001C16
Product Description
Issue
02
Date
2015-08-15
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 02 (2015-08-15)
EDFA3220-D(iODNCP)
Product Description
Version
The following table lists the product version related to this document.
Product Name
Version
EDFA3220-D
V100R001C16
V100R005C00
Change History
Changes between document issues are cumulative. The latest document issue contains all the
changes made in earlier issues.
Issue 02 (2015-08-15)
ii
EDFA3220-D(iODNCP)
Product Description
Contents
Contents
About This Document.....................................................................................................................ii
1 Product Overview.......................................................................................................................... 1
1.1 Product Positioning.........................................................................................................................................................2
1.2 Product Highlights.......................................................................................................................................................... 2
Issue 02 (2015-08-15)
iii
EDFA3220-D(iODNCP)
Product Description
1 Product Overview
Product Overview
Issue 02 (2015-08-15)
EDFA3220-D(iODNCP)
Product Description
1 Product Overview
Application Scenario
The EDFA3220-D is applicable in the CATV+PON fiber to the building (FTTB) and fiber to
the home (FTTH) scenarios. Figure 1-1 shows the networking for CATV+PON FTTB and
FTTH.
Figure 1-1 Networking for CATV+PON FTTB and FTTH
The CATV+PON FTTB and FTTH networking has the following advantages:
l
Flexible provisioning of multiple services, including voice, IPTV, and private line
services
Single ONT supporting multiple services by employing the single-fiber triplewavelength technology, minimizing investments
Issue 02 (2015-08-15)
Standardized
EDFA3220-D(iODNCP)
Product Description
1 Product Overview
2.
Modularized
Features a fully modularized design: Modules can be independently removed, which
enables flexible configuration and easy capacity expansion.
3.
4.
5.
Tightly integrated
Multiplexes signals from 32 PON input ports with a 2-U high body.
Leads out 66 optical ports to the panel, among which 2 are active/standby CATV
input ports, 32 are PON ports, and 32 are COM output ports.
Highly maintainable
Supports front access, and side-by-side, back-to-back, and against-wall installation,
convenient for deployment and maintenance.
6.
Secure
Offers a high level of protection and security, including coating protection for the
mounting ears, overall ground protection, and mechanically-guaranteed fiber bending
radius.
7.
Environment-friendly
Manufactured with environment-friendly materials and complies with EU restriction of
the use of certain hazardous substances (RoHS) standards. All materials used do not
contain lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls
(PBBs), or polybrominated diphenyl ethers (PBDEs).
Issue 02 (2015-08-15)
EDFA3220-D(iODNCP)
Product Description
This topic describes the main functions, function implementation, and some other features for
the device. The features include the communication interfaces, configuration and
management, alarm and event management, and reliability and maintainability of the device.
2.
Issue 02 (2015-08-15)
Main functions:
Amplifies a channel of CATV signals, divides the signals into 32 channels, and
multiplexes the 32 channels of CATV signals with 32 channels of PON signals.
(Constant output power of CATV signals 19.5 dBm/1550 nm; default output
power of CATV signals: 20.5 dBm/1550 nm)
Supports line protection by selecting a better CATV input from 2 using the 1:2
optical switch.
A single module is used to implement the functions of the 1:2 optical switch,
amplifier, optical splitter, and optical multiplexer.
b.
The 1:2 optical switch implements line protection at the input end as follows:
n
When the power of the active input port drops below the preset threshold, the
1:2 optical switch selects the standby input port.
When the power of the active input port rises above the preset threshold, the
1:2 optical switch selects the active input port.
When the power of both the active and standby input ports is below the preset
threshold, the 1:2 optical switch selects the port with higher power.
When the 1:2 optical switch is faulty, CATV signals are directly transmitted.
EDFA3220-D(iODNCP)
Product Description
Communication Port
The device provides the COM serial port and Ethernet port, which are described in Table 2-1.
Table 2-1 Description of communication ports
Port Type
Description
Ethernet port
EDFA3220-D(iODNCP)
Product Description
When the input power is within the range of -6 dBm to +8 dBm, users can set a constant
output power (typical output power range: 15.5 dBm to 20.5 dBm).
2.
The EDFA module and the 1:2 optical switch can be managed through SNMP or web
interface.
3.
The input power threshold of the 1:2 optical switch is configurable. When the power of
both CATV input ports is below the threshold, the 1:2 optical switch selects the port with
higher power.
4.
b.
Output power
c.
d.
Module status
e.
f.
Laser temperature
g.
Configuration of the input power, output power, bias current of the laser, and
temperature alarm threshold of the laser
2.
3.
Power failure
b.
Fan failure
c.
d.
Software exception
e.
Description
Reliability
Issue 02 (2015-08-15)
EDFA3220-D(iODNCP)
Product Description
Item
Description
Maintainability
Issue 02 (2015-08-15)
EDFA3220-D(iODNCP)
Product Description
3 Product Structure
Product Structure
Overview
The EDFA3220-D includes 4 modules:control module, fan module, power module, and
service module, as shown in Figure 3-1.
Figure 3-1 Modules of the device
Control Module
The control module manages all the internal communications of the device, detects the
availability status of the sub-modules, and obtains the operating status of the entire device.
The U2000 ODN NMS can send configuration commands through the control module to the
sub-modules for remote management.
Issue 02 (2015-08-15)
EDFA3220-D(iODNCP)
Product Description
3 Product Structure
Table 3-1 and Table 3-2 describe the control module ports and indicator status.
Table 3-1 Description of the RJ-45 ports
Port
Description
Ethernet
Console
It is a serial port.
Description
17
Fan Module
Figure 3-3 shows the fan module.
Issue 02 (2015-08-15)
EDFA3220-D(iODNCP)
Product Description
3 Product Structure
Power Module
The device supports two independent -48 V DC power modules that can run in hot standby
mode. Each power module supports a maximum load of 240 W.
Figure 3-4 Power Module
Issue 02 (2015-08-15)
10
EDFA3220-D(iODNCP)
Product Description
3 Product Structure
Description
Power port
PWR indicator
Power switch
Service Module
The service module includes optical ports, indicators, buttons, and a screen, which are
described in Table 3-4, Table 3-5, Figure 3-5, and Table 3-6.
Figure 3-5 Service module
Issue 02 (2015-08-15)
Port
Description
Connector Type
PON
LC/UPC
COM
LC/APC
IN1/IN2
SC/APC
11
EDFA3220-D(iODNCP)
Product Description
3 Product Structure
Description
ACT
LASER
R1
R2
OPM-R1
OPM-R2
EDFA-In
EDFA-Fail
CAUTION
When you turn on the PUMP laser lock, do not look into the COM ports without eye
protection. Otherwise, the laser will injure your eyes.
Issue 02 (2015-08-15)
12
EDFA3220-D(iODNCP)
Product Description
3 Product Structure
Issue 02 (2015-08-15)
No
.
Display
Description
Type Code
Product type
Serial
Number
Case Temp
EDFA case
temperature
Work Mode
Input
Power
Input Th
Output
Power
Output Th
APC Power
10
P1 Iop
Operating current of
PUMP 1
Display Picture
13
EDFA3220-D(iODNCP)
Product Description
Issue 02 (2015-08-15)
3 Product Structure
No
.
Display
Description
11
P1 Icool
Cooling current of
PUMP 1
12
P1 TChip
Temperature of
PUMP 1
13
P2 Iop
Operating current of
PUMP 1
14
P2 TChip
Temperature of
PUMP 2
15
P3 Iop
Operating current of
PUMP 3
16
P3 TChip
Temperature of
PUMP 3
17
OLP Work
Mode
18
OLP Work
Line
19
OLP R1
Power
20
OLP R1
Power Th
21
OLP R1
Switch Th
22
OLP R2
Power
23
OLP R2
Power Th
24
OLP R2
Switch Th
25
OLP Return
Time
Return time
26
IP Addr(Ext):
**.**.**.**
IP Addr(Ext)
27
Net
Mask(Ext):
**.**.**.**
Net Mask(Ext)
Display Picture
14
EDFA3220-D(iODNCP)
Product Description
3 Product Structure
No
.
Display
Description
28
Gateway
**.**.**.**
Gateway
Display Picture
NOTE
Press the SET button to enter the set mode, press the NEXT button with the left arrow to increase a
value, press the PRE button with the right arrow to decrease a value, and press the SET button again to
confirm a setting.
Issue 02 (2015-08-15)
15
EDFA3220-D(iODNCP)
Product Description
4 Technical Specifications
Technical Specifications
Device Specifications
Table 4-1 Device specifications
Item
Specification
Dimensions (H x W x D; unit:
mm)
88 x 440 x 240
Weight
8 kg
DC power voltage
120 W
Environmental Specifications
Table 4-2 Environmental specifications
Issue 02 (2015-08-15)
Item
Storage Environment
Operating Environment
Standards compliance
Climate
Atmospheri
c pressure
70 kPa106 kPa
Temperature
-40C to +70C
-5C to +65C
Temperature
change rate
1 C/min
0.5C/min
16
EDFA3220-D(iODNCP)
Product Description
4 Technical Specifications
Item
Storage Environment
Operating Environment
Relative
humidity
5%RH to 95%RH
5%RH to 95%RH
Solar
radiation
1120 W/m2
Heat
radiation
600 W/m2
Altitude
4000 m
Wind speed
5 m/s
NOTE
l The temperature and humidity are measured 1.5 m above the floor and 0.4 m from
the front of the device.
l This product's operating temperature is -5C to 65C. The outdoor installation needs
to use the heat exchanger cabinets, such as Huawei S200.
l The air density varies with the altitude, which affects the heat dissipation capability
of devices. Therefore, the operating temperature of the device changes with the
altitude.
Issue 02 (2015-08-15)
17
EDFA3220-D(iODNCP)
Product Description
4 Technical Specifications
Item
Storage Environment
Operating Environment
Water resistance
requirements
Air cleanness
requirements
Issue 02 (2015-08-15)
18
EDFA3220-D(iODNCP)
Product Description
4 Technical Specifications
Suspended dust
5.00 mg/m3
0.40 mg/m3
Deposited dust
20.0 mg/(m2h)
15.0 mg/(m2h)
Sand
300 mg/m3
300 mg/m3
SO2
0.30 mg/m3
H2S
0.10 mg/m3
NO2
0.50 mg/m3
NH3
1.00 mg/m3
Cl2
0.10 mg/m3
HCl
0.10 mg/m3
HF
0.01 mg/m3
O3
0.05 mg/m3
Ran
dom
vibra
tion
Issue 02 (2015-08-15)
Subitem
Frequency
range
5 Hz to 10 Hz
10 Hz to 50 Hz
50 Hz to 100
Hz
Acceleratio
n spectral
density
(ASD)
0.02 m2/s3
dB/oct
+12
-12
19
EDFA3220-D(iODNCP)
Product Description
4 Technical Specifications
Subitem
Frequency
range
5 Hz to 10 Hz
10 Hz to 50 Hz
50 Hz to 100 Hz
ASD
0.02 m2/s3
dB/oct
+5
-5
Shock
response
spectrum II
Half sine wave 150 m/s2 when an 11-ms shock test that includes
18 shocks and covers 6 directions (3 shocks per direction)
Performance Specifications
Table 4-7 Optical laser specifications
Module
Specifications
32
Wavelength
1545 nm to 1565 nm
-0.5 dB to 1 dB
Polarization-dependent gain
0.5 dB
Noise figure
Output stability
1 dB
Life time
10 years
EMC Standards
Table 4-8 EMC standards
Issue 02 (2015-08-15)
Item
Standards Compliance
EN55022
20
EDFA3220-D(iODNCP)
Product Description
Issue 02 (2015-08-15)
4 Technical Specifications
Item
Standards Compliance
IEC61000-4-2
IEC61000-4-2
IEC61000-4-3
EN55022
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
IEC61000-4-29
DC power port
ETSI EN300132-2
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
21
EDFA3220-D(iODNCP)
Product Description
This topic describes the network management system (NMS) of the EDFA3220-D, the U2000
ODN NMS.
The U2000 ODN NMS serves as the basic management platform of the intelligent optical
distribution network (iODN) solution. It works with iODN devices and the iField to provide
customers with E2E management of fiber infrastructure networks through the whole life
cycle, improving the usage of fiber infrastructure networks and protecting customers'
investments in fiber infrastructures.
The U2000 ODN NMS supports EDFA3220-D management and other functions such as
alarm query, as shown in Figure 5-1 and Figure 5-2. For details about the functions of the
U2000 ODN NMS, see iManager U2000 ODN Management System Product
Documentation
Figure 5-1 Device management interface
Issue 02 (2015-08-15)
22
EDFA3220-D(iODNCP)
Product Description
Issue 02 (2015-08-15)
23
EDFA3220-D(iODNCP)
Product Description
C
CATV
Cable TeleVision
CM
Cable Modem
CO
Central Office
D
DC
Direct Current
E
EDFA
EMC
ElectroMagnetic Compatibility
EMU
F
FAN
FTTB
Issue 02 (2015-08-15)
24
EDFA3220-D(iODNCP)
Product Description
FTTH
G
GPON
H
HTTPS
I
IPTV
M
MSO
O
OA
Optical Amplifier
ODN
ONT
OSW
Optical SWitch
P
PON
PWR
Power Cable
Q
QAM
S
SNMP
Issue 02 (2015-08-15)
25
EDFA3220-D(iODNCP)
Product Description
T
TCP/IP
W
WDM
Issue 02 (2015-08-15)
26