Beruflich Dokumente
Kultur Dokumente
Edition 2014-01_1
Construction
Product
Description
Sika Concrete Primer is a two component, rapid curing, high solids, solvent based
polyurea/polyurethane-hybrid primer
Uses
Bonding agent for Sikalastic - Liquid Applied Membranes and Sikafloor MTC
Balcony products cementitious substrates
Characteristics /
Advantages
Product Data
Form
Appearance / Colour
Packaging
Storage
Storage Conditions /
Shelf Life
Technical Data
Chemical Base
Density
1.02 kg/l
Flash Point
Part A: 40 C
Part B: 73 C
1/3
System
Information
Application Details
Substrate Quality
Substrate Preparation
carried out using appropriate products from the Sikafloor , SikaDur , Sika Monotop
Application
Conditions /
Limitations
Substrate and ambient
Temperature
Ambient Temperature
4% moisture content.
Substrate Moisture
Content
Dew Point
Consumption
Application
Instructions
Application Method /
Tools
Ensure surface is dry and free from dust and laitance. Previously primed
areas must be free from contamination before re-priming or top coating.
Product may be applied to damp surfaces but these must not be visibly wet
(see substrate moisture content).
Prepare primer by mixing the base until uniform. Add the activator and re-mix
until homogeneous.
Apply between +5 and +30 C. Air and substrate temperatures should remain
a minimum of +3C above dew point throghout the application and curing
periods.
2/3
Construction
Potlife
1 hour at 20C
Note: Pot life will decrease at higher temperatures.
Waiting Time /
Overcoating
At 20 C:
Notes on Application /
Limitations
If heating is required do not use gas, oil, paraffin or other fossil fuel heaters, these
produce large quantities of both CO2 and H2O water vapour, which may adversely
affect the finish. For heating use only electric powered warm air blower systems.
Value Base
All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
Value Base
All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
For information and advice on the safe handling, storage and disposal of chemical
products, users shall refer to the most recent Material Safety Data Sheet containing
physical, ecological, toxicological and other safety-related data.
Legal Notes
3/3