Beruflich Dokumente
Kultur Dokumente
JAIN UNIVERSITY
Decl ared as De emed -to -b e Un i versi t y u / s 3 o f th e UG C Act 1 956
a.
06
b.
Discuss the various loads to be considered for the design of RCC structural members?
08
a.
05
b.
A RCC beam rectangular section 300 mm wide and overall depth of 450 mm is reinforced
09
with 4 bars of 20 mm diameter on tension side. Effective cover is 30 mm. Find the
ultimate moment of resistance and shear strength of the section, if fck = 25 N/mm2 and
fy = 500 N/mm2.
3.
A simply supported beam of rectangular section of 300 mm wide and 600 mm overall depth.
14
The effective span of beam is 5 m. The beam is reinforced on tension side with 4-#25 and on
compression side with 3-#20. The dead load on the beam including self weight is 5 kN/m. The
live load acting on the beam is 15 kN/m. Using M25 grade concrete and Fe415 steel, estimate
the short term and long term deflection of the beam. Assume an effective cover of 25 mm on
both sides.
4.
Design a simply supported RC beam to take an imposed load of 15 kN/m. Adopt M20 grade
14
concrete and Fe415 grade steel. The support width is 300 mm. Sketch the reinforcement
details.
5.
Design the interior span of a continuous slab for the following data.
14
Slab is continuous over Tee-beams spaced at 3.5 m intervals; Width of the rib = 230 mm;
superimposed load = 3 kN/m2; M20 grade concrete and Fe415 grade steel.
6.
a.
04
b.
10
length of the column is 3.5m. The ends of the column are effectively held in position and
also restrained against rotation. The grade of concrete and steel are M20 and Fe 415
respectively.
7.
Design an isolated rectangular footing of uniform depth for the column of size 230 mm X 400
14
mm supporting an axial service load of 800 kN. The safe bearing capacity of the soil at site is
180 kN/m2. Use M20 grade concrete and Fe415 steel. Sketch the reinforcement details.
8.
a.
04
b.
Design the reinforcement for one of the flight of waist slab type stairs with following data
10
Number of steps per flight = 13; Tread = 250 mm; Rise = 180 mm; Width of landing
beam = 300 mm; depth of waist slab = 150 mm; fck = 20 N/mm2; fy = 415 N/mm2