Beruflich Dokumente
Kultur Dokumente
MULTI-PURPOSE
WITHOUT COMPROMISE
MAIN BENEFITS
Application versatility thanks to the COP
1435 rock drill
Extensive boom reach means fewer set-ups
Optimized for small spaces thanks to three
different feed lengths
PERFORMANCE
+ HYDRAULIC ROLLOVER
Most drill rigs can place holes in the ground, but the capacity of the
FlexiROC T20 R does not stop there. It can perform 360 drilling in all
directions, meaning sidewards, upwards and horizontal face drilling.
This makes the drill rig perfectly suited for operations both on the surface and underground. It is all made possible with the rollover, available
as hydraulic or manual.
TECHNICAL SPECIFICATIONS
MAIN COMPONENTS
HOLE RANGE
Feed type, underground drilling (with hole depth)
Metric
Imperial
Metric
Imperial
38 64 mm
1 12 2 12
20 12 (10 12)
38 64 mm
1 12 2 12
16 10 (9)
38 64 mm
1 12 2 12
13 9 (6 10)
Metric
Imperial
Metric
Imperial
38 64 mm
1 12 2 12
20 8 (10 8)
38 64 mm
1 12 2 12
16 7 (8 8)
38 64 mm
1 12 2 12
13 5 (6 7)
ENGINE
COMPRESSOR
Metric
Imperial
Metric
Imperial
82 kW
110 hp
12 bar
174 psi
50 l/s
106 cfm
Boom type
Impact power
Impact rate
RPM, max
Torque, max
COP 1435
Foldng boom
14 kW
210 bar
80 Hz
250
470 Nm
19 hp
Weight approx
206 lbf/ft
75 kg
165 lb
FEED
With 8 feed
Total length
With 10 feed
With 12 feed
Metric
Imperial
Metric
Imperial
Metric
Imperial
4 020 mm
13
4 620 mm
15
5 220 mm
17
Travel length
2 390 mm
7 10
2 990 mm
9 10
3 590 mm
11 9
Feed extension
600 mm
1 12
1 000 mm
3 3
1 000 mm
3 3
0.5 m/s
98 ft/min
0.5 m/s
98 ft/min
0.5 m/s
98 ft/min
16 kN
3 597 lbf
16 kN
3 597 lbf
16 kN
3 597 lbf
20 kN
4400 lbf
20 kN
4400 lbf
20 kN
4400 lbf
HYDRAULIC SYSTEM
3 045 psi
VOLUMES
Anti-jamming
Metric
Imperial
60 l
16 US gal
120 l
32 US gal
Metric
Imperial
Compressor oil
9l
2.4 US gal
50C
122F
8.5 l
2.2 US gal
140 l
37 US gal
6l
1.6 US gal
10 m absolute
ELECTRICAL SYSTEM
Metric
Imperial
Voltage
24 V
Filter area
6 m2
65 sq.ft
Batteries
2 x 12 V, 100 Ah
2 pcs
Alternator
24 V, 55 Ah
130 l/s
275.5 cfm
2 x 40 W LED + 2 x 70 W halogen
100 mm
1 x 40 W + 2 x 21 W LED
7 bar
101 psi
2 x 40 W LED
8 l/pulse
0.28 cu.ft/pulse
Reverse buzzer
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
FlexiROC T20 R
Mark II
Hydraulic rollover.
5 900
1 850
4 950
1 450
2 600
Imperial
12
9 100 mm
29 10
10
8 500 mm
27 10
8 000 mm
26 3
190
1 300
600
190
Feed
3 150
5 700
1 100
3 900
Imperial
Metric
Imperial
Height (H)
2 600 mm
8 6
12 feed
4 020 mm
13 2
Length (L)
5 700 mm
18 6
10 feed
4 620 mm
15 2
Width (W)
1 880 mm
6 2
8 feed
5 220 mm
17 2
5 600 kg
12 345 lb
47
Rollover
53
Feed swing angle
7000
6000
OPTIONAL EQUIPMENT
Carrier
Water flushing kit with water pump
Hydraulic winch
Diesel engine pre heater
Electric refilling pump
Hydraulic AUX outlet
5000
45
4000
4 680
1 880
3000
2000
Feed
Available with 8, 10 and 12 feed
Hydraulic rollover/manual rollover, 190 + 190
Rod Adding System (RASl)
1000
1 180
45
Dust control
Water mist system
Delivered equipment, not mounted
Gas charging equipment for rock drill
Conversion kit R32
Conversion kit T35/TC35
Chains for tires
1000
2000
9851 3524 01 2015-12 rebro, Sweden. Legal Notice Copyright 2015, Atlas Copco Rock Drills AB, rebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show
equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
www.atlascopco.com