Beruflich Dokumente
Kultur Dokumente
*350115*
EN
Revision 1.0
02/2016
www.akrapovic.com
www.akrapovic.com
Congratulations on purchasing the Akrapovi exhaust system. The Akrapovi exhaust system is a product of
Akrapovi d.d., Malo Hudo 8a, 1295 Ivanna Gorica, Slovenia (Akrapovi).
Please read this entire installation manual carefully prior to installing and using the Akrapovi exhaust
system.
Akrapovi exhaust system should only be installed by persons skilled in motorcycle exhaust system installation
and performance. The instructions provided in this manual should be followed to ensure proper installation
and safe use of the Akrapovi exhaust system. Akrapovi and/or its partners shall not be held liable for any
damage or personal injury (including direct, indirect, or consequential damage) sustained as a result of improper
installation of the Akrapovi exhaust system or its use and maintenance contrary to the instructions and warnings
contained herein.
If you have any questions regarding the installation and/or proper use of the Akrapovi exhaust system or this
manual, please contact your local Akrapovi partner.
For more information on the Akrapovi exhaust systems, see the official Akrapovi website at:
http://www.akrapovic.com
GENERAL INFORMATION
Your safety is our number one priority. Please ride your motorcycle responsibly, safely and always obey local
traffic rules.
All statements made with regard to the exhaust systems compliance are made in respect of the exhaust system
as is. Any modifications of the Akrapovi exhaust system or its improper installation, use or maintenance that
is not in accordance with this Installation manual, may result in severe damage to the exhaust system and/ or
engine, as well as personal injury, and may affect the exhaust systems compliance with the legal requirements,
such as exhaust systems air and/ or noise emissions (as an example, the motorcycle may not be suitable for
use on public roads any longer), as well as warranty coverage.
The exhaust system may only be used in accordance with relevant laws and regulations, including state and
federal, where applicable.
Damage caused by improper installation, use and maintenance of the Akrapovi exhaust system is not covered
by the Akrapovi warranty. Please refer to the enclosed warranty with regard to the terms of our warranty.
Technical specifications of Akrapovi exhaust systems and related products are subject to change without notice.
Akrapovi takes all copyright and other rights infringement cases under serious consideration. If you have
any reason to believe that your exhaust system is not an original Akrapovi product, please contact our local
partners or Akrapovi at info@akrapovic.com.
2 / 32
YYWWPXXXXX
EVERY EXHAUST SYSTEM MUFFLER HAS ITS UNIQUE SERIAL NUMBER, WHICH IDENTIFIES THE
AUTHENTICITY OF THE PRODUCT. YOU CAN FIND THE SERIAL NUMBER ON THE MUFFLERS INLET
PIPE. PLEASE REFER TO THE PICTURE BELOW. PLEASE VERIFY THAT YOUR EXHAUST SYSTEM IS
AN ORIGINAL AKRAPOVI PRODUCT. IF YOU HAVE ANY DOUBTS, PLEASE CONTACT THE RESELLER
WHERE YOU PURCHASED THE EXHAUST SYSTEM OR AKRAPOVI PARTNERS. THIS MANUAL, ANY
CERTIFICATES AND AKRAPOVI WARRANTY APPLY TO ORIGINAL PRODUCTS ONLY.
3 / 32
www.akrapovic.com
USA WARNING
Various U.S. states and the U.S. federal government have individual laws regulating the use of aftermarket exhaust
parts and systems, especially as those parts and systems modify, remove, or replace original equipment catalysts.
Please consult the appropriate laws in your area before installing any aftermarket part or system on your vehicle to
ensure compliance with all applicable laws. Neither Akrapovic d.d. nor any of their subsidiaries or the sellers of the parts
or systems make any representation that any of their parts or systems comply with any such laws.
CALIFORNIA WARNING
California laws prohibit the use of any aftermarket exhaust part or system that modifies, removes or replaces original
equipment catalysts unless the California Air Resources Board has issued an Executive Order regarding such part or
system or unless the part or system is exempted by being used only on racing vehicles on closed courses. Neither
Akrapovic d.d. nor any of their subsidiaries make any representation that any of their parts or systems has received such
an Executive Order or that any of their parts or systems conform with the racing vehicles exemption. The purchasers are
entirely responsible for informing themselves of applicable California laws and to comply with those laws.
GENERAL NOTE
Photographs and other illustrations in this manual are symbolic and are intended to help represent individual steps
for proper installation and use, as well as for a general overview. The actual component parts of the Akrapovi
exhaust system may not entirely correspond to the photographs and other illustrations.
SYMBOLS
The following symbols are used throughout these installation instructions:
TOOLS AND PROTECTIVE
EQUIPMENT REQUIRED
TIGHTENING TORQUE
LUBRICATION
HAND TIGHTEN
INSTALLATION TIP
CAUTION OR IMPORTANT
4 / 32
PARTS LIST
The following parts should be found in the box:
Installation Manual
Homologation certificate/ compliance documents if applicable
Warranty
Fitting material
Muffler and pipes
Detailed list of parts can be found on the Akrapovi website (please use the QR code on the front page or look for
Schematic view in the respective product page on www.akrapovic.com).
The process of uninstalling the original exhaust system may vary depending on the existing exhaust system.
Please follow the original exhaust system manufacturers instructions for uninstalling the original exhaust system.
If you for any reason decide otherwise, please note that any information provided in this respect herein should
be considered as general information provided for your convenience only. Akrapovi shall not assume any
liability or responsibility with regard to uninstalling your existing exhaust system, warranty coverage of such
exhaust system or vehicle or their further fitness for use.
In case your Akrapovi exhaust system may not be used on certain roads or under certain conditions,
please keep the stock or other exhaust system that you can use in such circumstances legally.
5 / 32
www.akrapovic.com
Put the motorcycle on a side stand, we recommend a racing stand. Make sure, that surface is solid and at.
Remove the seat (F 01).
F 01
3.
Unscrew the bolts from the rear side panels and remove the panels (F 02, 03).
F 02
6 / 32
F 03
4.
Unscrew the bolts and remove the mudguard, the passenger handles with the tail light and disconnect the electrical
leads for the tail light (F 04, 05, 06, 07, 08, 09, 10, 11).
F 04
7 / 32
www.akrapovic.com
F 05
F 06
8 / 32
F 07
F 08
9 / 32
www.akrapovic.com
F 09
F 10
10 / 32
F 11
5.
F 12
11 / 32
www.akrapovic.com
F 13
6.
Unscrew the bolts on the chassis which hold the license plate holder and move away the license plate holder
(F 14, 15).
F 14
12 / 32
F 15
7.
Unscrew the bolt from the metal clamp at the muffler - link pipe joint (F 16).
F 16
13 / 32
www.akrapovic.com
8.
Unscrew the bolts from the muffler bracket and remove the muffler.
IMPORTANT: hold the muffler during process of unscrewing! The stock muffler is heavy and it can damage
the motorcycle if it falls from a high! (F 17, 18).
F 17
F 18
14 / 32
Correctly position and hand tighten the Akrapovic metal hanging bracket (F 19, 20).
F 19
F 20
15 / 32
www.akrapovic.com
2.
Replace and tighten the license plate holder and the Akrapovic metal hanging bracket (F 21, 22, 23).
F 21
F 22
16 / 32
F 23
3.
Coat the bolt and interior of the metal clamp with Akrapovic anti-seize lead-free copper paste (black tube) and
correctly install the metal clamp onto the link pipe (F 24).
F 24
17 / 32
www.akrapovic.com
4.
Correctly position the carbon-fiber clamps and slide them onto the muffler - bear in mind the right offset for the left
muffler and left offset for the right muffler of the carbon-fiber clamps viewed from the rear (F 25, 26).
IMPORTANT: open the clamps slightly wider than the diameter of the outer sleeves of the mufflers do not
scrape them along the muffler outer sleeves!
F 25
F 26
18 / 32
5.
Position the left muffler correctly and slide it onto the outlet side of the stock link pipe (Akrapovic muffler and link
pipe are welded together) (F 27).
F 27
6.
Position the right muffler correctly and slide it onto the outlet side of the Akrapovic link pipe and attach the spring
(F 28, 29).
IMPORTANT: make sure, that spring pull the muffler all the way onto the link pipe use rubber mallet if
necessary to tap the connection into place!
F 28
19 / 32
www.akrapovic.com
F 29
7.
Attach the spring at the Akrapovic link pipe - stock link pipe joint (F 30, 31).
IMPORTANT: make sure, that spring pull the Akrapovic link pipe all the way onto the stock link pipe use
rubber mallet if necessary to tap the connection into place
F 30
20 / 32
F 31
8.
Tighten the metal clamp at the Akrapovic link pipe - stock link pipe joint and the muffler carbon-fiber clamps onto the
Akrapovic metal hanging bracket on the frame (F 32, 33).
F 32
21 / 32
www.akrapovic.com
F 33
9.
Attach the mudguard, the passenger handles with the tail light and connect the electrical lead for the tail light in the
reverse order from the order in which they were removed (F 34, 35, 36, 37, 38, 39, 40, 41, 42).
F 34
22 / 32
F 35
F 36
23 / 32
www.akrapovic.com
F 37
F 38
24 / 32
F 39
F 40
25 / 32
www.akrapovic.com
F 41
F 42
26 / 32
F 43
11. Position of the correctly installed Akrapovic SLIP-ON SP SERIES exhaust system (F 44, 45).
F 44
27 / 32
www.akrapovic.com
F 45
28 / 32
[EMPTY PAGE]
29 / 32
www.akrapovic.com
30 / 32
TROUBLESHOOTING:
Problem
Possible cause
Solution
loosened clamp
31 / 32
www.akrapovic.com