Beruflich Dokumente
Kultur Dokumente
legend
Expansion joint
Plant
Department
Contract
: 1320257_900
Approved date
un-13
: 27-Ju
Created by
: DMU
Approved by
: MMB
50062523-1.0
Plant:
Department:
Table of contents
Page
Table .......................................................................................................... 3
Flanges:
Erector's note:
Normal erection operations include the correction of minor misfits by moderate amounts of
straightening, shimming, reaming, chipping, cutting or grinding and the drawing of elements
into line through the use of drift pins. Misfits which cannot be corrected by the foregoing means
or which require major changes in equipment configuration are to be reported immediately to
the supplier by the erector, to enable the supplier either to correct the misfit or to approve the
most efficient and economic method of correction to be implemented.
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
2/11
50062523-1.0
Plant:
Department:
1 Table
Item no.
Duct
chute
dedusting
pipe
Dimension
[mm]
AxB/A
GA
plan
no.
Temp
[C]
Press
[kPa]
13-1
Duct
1786X1130
450
0.4
H
Axial Lateral Erection
exp.
measure
exp.
[mm]
[mm] [mm]
65
10
550
Drawing
model
Remarks
Duct 1
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
3/11
50062523-1.0
Plant:
Department:
Model: Duct 2
Rectangular or circular, offset.
Model: Duct 3
Rectangular or circular with flanges.
Model: Duct 4
Rectangular or circular with flanges, offset.
Model: Sketch 1
Flow direction is shown with an arrow at position 1. X mm to be offset from centre line.
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
4/11
50062523-1.0
Plant:
Department:
Model: Chute 2
Chute type 2. Rectangular or circular.
Model: Chute 3
Chute type 2. Rectangular or circular, offset.
Model: Chute 4
Detachable chute.
Model: Sketch S
Flow direction is shown with an arrow at position 1. X mm to be offset from centre line.
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
5/11
50062523-1.0
Plant:
Department:
Model: Dedusting 2
Dedusting pipe, circular.
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
6/11
50062523-1.0
Plant:
Department:
Model: Lined 2
Lined with 214/254 brick lining.
Model: Lined 3
Lined with Densit.
Model: Lined 4
Lined with Densulate.
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
7/11
50062523-1.0
Plant:
Department:
Model: Reinforced 2
Chute, reinforced, rectangular or circular.
Model: Reinforced 3
Dedusting, reinforced.
Model: Reinforced 4
Chute, circular, detachable.
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
8/11
50062523-1.0
Plant:
Department:
Model: Scissor 2
Scissor. Chute expansion joint.
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
9/11
50062523-1.0
Plant:
Department:
8 Circular flange
Item no.
D1
bxt
d2
no.
Remarks
Flange 1
Flange 2
Flange 3
Flange 4
Flange 5
Flange 6
Flange 7
Flange 8
Flange 9
Flange 10
Flange 11
Flange 12
Flange 13
Flange 14
Flange 15
Flange 16
Flange 17
Flange 18
Flange 19
Circular flange.
Special flange 1.
Special flange 2.
Special flange 3.
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
10/11
50062523-1.0
Plant:
Department:
axb
bxt
k1
k2
d2
Remarks
Flange 1
Flange 2
Flange 3
Flange 4
Flange 5
Flange 6
Flange 7
Flange 8
Flange 9
Flange 10
Flange 11
Flange 12
Flange 13
Flange 14
Flange 15
Flange 16
Flange 17
Flange 18
Flange 19
Rectangular/square flange.
Special flange 1.
Special flange 2.
Special flange 3.
---o0o---
The information transmitted by this document is the proprietary and confidential property of FLSmidth
and may not be duplicated, disclosed or utilized without written consent from FLSmidth.
11/11