Beruflich Dokumente
Kultur Dokumente
Table of Contents
Table of Contents ...................................................................................................... 2
Contact List ............................................................................................................... 6
CVC-151
CVN-251
CTR-351
CDM-451
Page 2
Product Guide
APPENDIX A
Wulfsberg Terms and Conditions of Sale ............................................................A-2
Warranty Statement ...............................................................................................A-8
International Return Policy and Procedures......................................................A-10
Page 3
Product Guide
List of Figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8
Figure 9.
Figure 10.
Figure 11
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
Figure 28.
Figure 29.
Page 4
Product Guide
Figure 31.
Figure 32.
Figure 33.
Figure 34.
Figure 35.
Figure 36.
Figure 37.
Figure 38.
Figure 39.
Page 5
Product Guide
Page 6
Product Guide
Product Support
Training Information
Jay Jensen
Product Support Manager, Repair Station Supervisor
Telephone: 1-928-756-1615
FAX: 1-928-708-1542
service@wulfsberg.com
Field Service
John Smith
Field Service Engineer
Telephone: 1-928-756-1615
FAX: 1-928-708-1542
service@wulfsberg.com
Technical Publications
Telephone: 1-928-756-1614
FAX: 1-928-708-1542
service@wulfsberg.com
Page 7
Product Guide
Israel
Roger Worth
Consultant
roger.worth@chelton.co.uk
Southern Africa
Tom Roos
Director
troos@cobham.co.za
Page 8
Product Guide
Page 9
Product Guide
PRODUCT DESCRIPTION
Unique color LCD display capable of 8.33 or 25 kHz selection, active & standby frequencies along with NVG option.
Displays command auto-tune frequencies. Improved reliability.
Page 10
Product Guide
Black
Gray
Not
Faceplate Faceplate NVG
x
400-047152-0001
400-047152-0002
NVG
28 VDC
Backlight
5 VDC
Backlight
Volume
Control
No Vol
Control
x
x
5 VAC
Backlight
x
x
Page 11
Product Guide
Black
Gray
Not
Faceplate Faceplate NVG
NVG
28 VDC
Backlight
5 VDC
Backlight
5 VAC
Backlight
400-047152-0004
400-047152-0005
400-047152-0100
400-047152-0101
400-047152-0102
400-047152-0103
400-047152-0104
400-047152-0105
No Vol
Control
x
x
x
x
x
x
400-047152-1000
400-047152-1001
400-047152-1002
400-047152-1003
400-047152-1004
400-047152-1005
400-047152-1100
400-047152-1101
400-047152-1102
400-047152-1103
400-047152-1104
400-047152-1105
Volume
Control
x
x
x
x
x
x
x
x
x
x
x
x
x
Page 12
Product Guide
PRODUCT DESCRIPTION
Unique color LCD display, active & standby frequencies displayed along with Radial & bearing information selectable.
NVG option available. Improved reliability.
Page 13
Product Guide
Black
Faceplate
x
400-047252-0001
400-047252-0002
400-047252-0003
400-047252-0004
400-047252-0005
Gray
Faceplate
Not
NVG
NVG
28 VDC
Backlight
5 VDC
Backlight
x
x
5 VAC
Backlight
Volume
Control
x
No DME
Hold
Function
x
x
x
x
x
No Vol
Control
DME Hold
Function
x
Page 14
Product Guide
Black
Faceplate
Gray
Faceplate
Not
NVG
400-047252-0007
400-047252-0008
400-047252-0009
400-047252-0010
400-047252-0011
400-047252-0100
400-047252-0101
400-047252-0102
400-047252-0103
400-047252-0104
400-047252-0105
400-047252-0106
400-047252-0107
400-047252-0108
400-047252-0109
400-047252-0110
400-047252-0111
400-047252-1000
400-047252-1001
400-047252-1002
NVG
28 VDC
Backlight
5 VDC
Backlight
5 VAC
Backlight
Volume
Control
x
x
x
x
x
x
x
x
x
x
DME Hold
Function
x
No DME
Hold
Function
No Vol
Control
x
x
x
x
x
x
Page 15
Product Guide
Not
NVG
400-047252-1004
400-047252-1005
400-047252-1006
400-047252-1007
400-047252-1008
400-047252-1009
400-047252-1010
400-047252-1011
400-047252-1100
400-047252-1101
400-047252-1102
400-047252-1103
400-047252-1104
400-047252-1105
400-047252-1106
400-047252-1107
400-047252-1108
400-047252-1109
400-047252-1110
400-047252-1111
CVN-252
NAV CONTROL
P/N
400-047252-1003
Black
Faceplate
NVG
28 VDC
Backlight
5 VDC
Backlight
5 VAC
Backlight
Volume
Control
No Vol
Control
x
x
x
x
x
x
x
DME Hold
Function
No DME
Hold
Function
x
x
x
x
x
x
x
Page 16
Product Guide
PRODUCT DESCRIPTION
Unique color LCD display. Capable of controlling dual remote transponders. Both controller & flight segment identifiers
indexed via display. NVG option available. Improved reliability.
Features
FliteLine Mode S Control Display
Supports Collins Gables 2 x 5 tuning interface
Controls dual remote transponders
Flight Identifiers - capable of up to 10 separate segments
Publication No. 150-041955
Rev. D
Black
Gray
Not
Faceplate Faceplate NVG
NVG
400-047352-0001
400-047352-0002
400-047352-0100
400-047352-0101
400-047352-0102
5 VDC
Backlight
5 VAC
Backlight
x
x
x
400-047352-1000
400-047352-1001
400-047352-1002
400-047352-1100
400-047352-1101
400-047352-1102
28 VDC
Backlight
x
x
x
x
x
x
x
x
x
Page 18
Product Guide
PRODUCT DESCRIPTION
Unique color LCD display. Capable of controlling dual remote ADF receivers. Display menu includes ADF station,
antenna, bearing & BFO information. NVG option available. Improved reliability.
Features
LCD color display
NVG Compatible
FliteLine control display
Publication No. 150-041955
Rev. D
Black
Gray
Not
Faceplate Faceplate NVG
NVG
28 VDC
Backlight
5 VDC
Backlight
5 VAC
Backlight
400-047552-0001
400-047552-0002
400-047552-0003
400-047552-0004
400-047552-0005
400-047552-0100
400-047552-0101
400-047552-0102
400-047552-0103
400-047552-0104
400-047552-0105
400-047552-1000
Publication No. 150-041955
Rev. D
Volume
Control
x
x
x
x
x
x
x
x
No Vol
Control
x
x
x
x
Page 20
Product Guide
Black
Gray
Not
Faceplate Faceplate NVG
NVG
28 VDC
Backlight
5 VDC
Backlight
5 VAC
Backlight
400-047552-1002
400-047552-1003
400-047552-1004
400-047552-1005
400-047552-1100
400-047552-1101
400-047552-1102
400-047552-1103
400-047552-1104
400-047552-1105
Volume
Control
No Vol
Control
x
x
x
x
x
x
x
x
x
x
Page 21
Product Guide
PRODUCT DESCRIPTION
Color LCD utilizes the latest technology & is unique whereby the tuning functions of the Nav & Com are combined. This
results in a 50% panel space savings along with the realized weight reduction. NVG option available. Improved reliability.
Page 22
Product Guide
Page 23
Product Guide
Black
Faceplate
x
400-047955-0001
400-047955-0002
400-047955-0003
400-047955-0004
400-047955-0005
400-047955-0006
400-047955-0007
400-047955-0008
400-047955-0009
400-047955-0010
400-047955-0011
400-047955-0100
400-047955-0101
400-047955-0102
400-047955-0103
400-047955-0104
400-047955-0105
400-047955-0106
Gray
Faceplate
Not
NVG
NVG
28 VDC
Backlight
5 VDC
Backlight
5 VAC
Backlight
x
x
Volume
Control
x
No DME
Hold
Function
x
x
x
x
x
x
x
x
x
x
x
DME Hold
Function
No Vol
Control
x
x
Page 24
Product Guide
Black
Faceplate
Gray
Faceplate
Not
NVG
NVG
28 VDC
Backlight
5 VDC
Backlight
5 VAC
Backlight
400-047955-0108
400-047955-0109
400-047955-0110
400-047955-0111
400-047955-1001
400-047955-1002
400-047955-1003
400-047955-1004
400-047955-1005
400-047955-1006
400-047955-1007
400-047955-1008
400-047955-1009
400-047955-1010
400-047955-1011
400-047955-1100
400-047955-1101
x
x
DME Hold
Function
x
x
x
x
x
No DME
Hold
Function
x
No Vol
Control
x
400-047955-1000
Volume
Control
x
x
x
x
Page 25
Product Guide
28 VDC
Backlight
400-047955-1103
400-047955-1104
400-047955-1105
400-047955-1106
400-047955-1107
400-047955-1108
400-047955-1109
400-047955-1110
400-047955-1111
CCN-955
COM/NAV CONTROL
P/N
400-047955-1102
Black
Faceplate
Gray
Faceplate
Not
NVG
5 VDC
Backlight
5 VAC
Backlight
Volume
Control
x
x
x
No Vol
Control
x
No DME
Hold
Function
x
DME Hold
Function
x
x
x
x
x
x
Page 26
Product Guide
Figure 1.
Page 27
Product Guide
PRODUCT DESCRIPTION
The FliteLine VHF Communication System is an all digital DSP VHF Transceiver,
built and designed to ARINC Air Transport specifications. CVC-151 VHF
Transceiver is designed to meet the latest ATC environment and all future CNS
ATN requirements. The CVC-151 has provisions for VDL Mode 2 and VDL
Mode 3. Our FliteLine Communication System features a 20 watt solid-state
transmitter and is compliant with 25 kHz or 8.33 kHz spacing. CVC-151
Transceiver architecture is standard ARINC 429 which supports interface to FMS
systems and RMS 555 Radio Management System. The CVC-151 Transceiver is
totally interchangeable with current Series III VHF Coms. The result is increased
customer reliability.
Features
8.33 and/or 25 kHz Channel Spacing
FM Immunity
Continuous Transmit Capability (at reduced power)
Built-in SELCAL and ACARS Capability
New Color LCD CVC-152 Com Control Display
Or Multi-function Nav/Com CCN-955 CD
Increased System Self-Test and BIT
ARINC 429 Digital Data Bus
New CAN Bus Implementation
118.000-136.975 MHz Standard Frequency Range
118.000 -151.975 MHz Extended Frequency Range Option
Reduced Weight and Volume
Provisions for VDL Mode 2 and VDL Mode 3
Publication No. 150-041955
Rev. D
Page 28
Product Guide
C169
C37e and C38e
DO-186A
ED-23B
ANNEX 10
DO-160D
ED-14D
28 Vdc Aircraft Power
Receive 0.5 Amp - Transmit 4.5 Amp.
3.75 lbs (1.7 kg)
2.40 x 4.00 x 12.95 inches (60.96 x 101.6 x 328.93 mm)
-67F to +158F (-55C to + 70C)
55,000 Feet (16,764 m)
118.00-136.975 MHz or 118.000-151.975 MHz
8.33 and/or 25 kHz
20 Watts
Audio Outputs 10 100 mW
Configuration Variation
Description
400-048100
Figure 2.
Publication No. 150-041955
Rev. D
PRODUCT DESCRIPTION
The FliteLine VHF Navigation System is an all digital DSP Navigation System
which combines VOR/LOC, Glideslope and Marker Beacon functions. This
Receiver configuration supports the total navigation interface requirements for
MFD or moving map displays. The ARINC 429 digital data bus offers
compatibility with EFIS/LCD displays, the Wulfsberg RMS-555 Radio
Management and Flight Management Systems by supporting Nav auto-tune
operation. Additional interfaces are provided to HSI`s, CDI`s and RMI`s to
include analog. Automatic calibration of the VOR converter ensures navigation
guidance accuracy. FliteLine Navigation System represents 50% weight and
volume reduction as compared to Series III. FliteLine Navigation System is
interchangeable with Series III equipment using a special mounting tray adapter.
The result is increased customer reliability.
Features
Includes Glideslope and Marker Beacon
Digital VOR/LOC and Glideslope Converters
FM Immunity
Analog Outputs to CDI`s and HSI`s
Digital Redial/bearing Output
ARINC 429 Digital Data Bus
New Can Bus Implementation
Increased Self-test and BIT
Optional Stand Alone Color Control Head (CVN-252)
Or Color Multi-function (CCN-955) Nav/Com
Special Rotor Modulation Protection
Publication No. 150-041955
Rev. D
Page 30
Product Guide
Configuration Variation
Description
400-048500
Figure 3.
Publication No. 150-041955
Rev. D
PRODUCT DESCRIPTION
The FliteLine CTR-351 System is a full Mode S Transponder System which
provides complete compliance with current ATC requirements and operation
capability within the future CNS ATN network. It responds to ATC based
surveillance radar interrogations to provide position, identification and altitude.
Capabilities to support ADS and functions as an airborne data link terminal.
Critical element for safe operations within the ATC environment.
Features
300 Watt Transmitter Output
ARINC 429 Serial Bus Control
Level 3 Messaging
Interchangeable with Honeywell Transponder
Solid State Transmitter
Extensive Self-test Initiated From Control Display
Exclusive Use of Can Bus
Automatic Hijack Mode
Page 32
Product Guide
Description
CTR-351 Transponder, ATC Mode S, [Sales@Wulfsberg.com for Info]
Figure 4.
Page 33
Product Guide
PRODUCT DESCRIPTION
The CDM-451 is an all digital DME. The triple channel scanning DME provides ARINC 429
outputs along with analog outputs for two displays or EFIS MFDs. The CDM-451
Transceiver is compatible with FMS Systems to include auto-tune operation. The third
output channel can also provide single DME output to the FMS for independent navigation
solution. The Receiver can be tuned via ARINC 429 bus using individual CVN-252 Nav
Control Displays, the Wulfsberg Series III RMS 555 Radio Management System, or with
Flight Management Systems.
Features
Simultaneous Scanning of Three Ground Stations
325 Watt Transmitter
Continuous Self-test
Increased Built-in Diagnostics
ARINC429 Digital Data Bus Interface
Analog Outputs
New FliteLine CVN-252 Color Control Display
50% Volume and Weight Savings Compared to Series III DM-441B
Can Be Mounted Using Mounting Tray and Wiring from Series III DM-441B
Page 34
Product Guide
C66c
2C66b
DO-189
ED-54
DO-160D
ED-14D
27.5 Vdc Aircraft Power (+/- 20%)
1.2 Amp Max
3.6 lbs. (1.63 kg)
-67F to +158F (-55C to + 70C)
55,000 feet (16,764 m)
3.00 x 4.00 x 13.33 inches (76.2 x 101.6 x 338.68 mm)
Configurations Available
Configuration Variation
Description
400-041181-0001
400-041181-0011
400-041181-0012
Page 35
Product Guide
Figure 5.
Figure 6.
Page 36
Product Guide
Figure 7.
Figure 8.
Publication No. 150-041955
Rev. D
PRODUCT DESCRIPTION
The RMS 555 Radio Management System replaces many individual radio control
heads or tuning units with one simple-to-operate cockpit display unit. This
approach maximizes cockpit real estate and reduces pilot workload. The RMS
555 system consists of the RMU-556 Radio Management Unit (Display/CDU),
KDA-557 Data Adapter, and RMS 555 Configuration Module. The RMS 555
system can provide control for up to three VHF and/or two UHF communications
transceivers, two VHF navigation receivers, two DMEs, two Mode S
transponders and two ADF receivers. Systems can be configured for dual RMS
555 systems interlocked for redundancy and/or multiple operators.
Features
Single or Multiple System Configuration
Controls:
VHF and UHF Transceivers
VHF Navigation Receivers
DMEs
Mode S Transponders
ADF Receivers
TCAS I
Built-in Diagnostics
ARINC 429 Digital Data Bus
Publication No. 150-041955
Rev. D
Page 38
Product Guide
Description
RMU-556 Display 1-2 SEL 28V BLK 8.33 25 kHz
RMU-556 Display 5V BLK 8.33 25 kHz
RMU-556 Display 1-2 SEL 5V BLK 8.33 25 kHz
RMU-556 Display 1-2 SEL UHF 5V BLK 8.33 25 kHz
KDA-557 Data Adapter 8.33 25 kHz
RMS-555 Configuration Module
Figure 9.
Page 39
Product Guide
Figure 10.
Page 40
Product Guide
PRODUCT DESCRIPTION
The VCS 40A/C VHF Communication System includes an all-digital VHF
Transceiver built and designed to ARINC 700 series Air Transport specifications.
The VCS 40A/C features a 20-watt solid-state transmitter and can channel 25
kHz or 8.33 kHz spacing. The transceiver is tuned via the individual Series III
control heads, FliteLine Controls or ARINC 429 data bus allowing it to interface to
Flight Management Systems and other standard 429 protocol systems including
the Wulfsberg RMS 555 Radio Management System. The VC-401C Transceivers
and CD-402C controls are form, fit and functionally interchangeable with
VC-401B and CD-402B units. The control head allows the operator to select
25 kHz or 8.33 kHz tuning steps using a knob position selector on the front of the
control head.
Features
8.33 and/or 25 kHz Channel Spacing
Continuous Transmit Capability (at reduced power)
Built-in SELCAL and ACARS Capability
Optional Stand-alone Control Head (CVC-152, CCN-955)
Automatic System Self-Test and Diagnostics
ARINC 429 Digital Data Bus
118.00-136.975 MHz Standard Frequency Range
118.00-151.975 MHz Extended Frequency Range Option
FAA TSO Approvals: C37C & C38C (VC-401B & CD-402B)
C37D & C38D (VC-401C & CD-402C)
Publication No. 150-041955
Rev. D
Page 41
Product Guide
Description
VC-401B VHF Com 151.975 MHz 10 mW Audio
VC-401B VHF Com 136.975 MHz 20 mW Audio
VC-401B VHF Com 151.975 MHz 40 mW Audio
VC-401B VHF Com 136.975 MHz 40 mW Audio
VC-401B VHF Com 151.975 MHz 20 mW Audio
VC-401B VHF Com 136.975 MHz 10 mW Audio
VC-401C VHF Com 151.975 MHz 10 mW Audio
VC-401C VHF Com 136.975 MHz 40 mW Audio
VC-401C VHF Com 136.975 MHz 10 mW Audio
VC-401C VHF Com 136.975 MHz 8.33-25 kHz Switched 10 mW Audio
VC-401C VHF Com 151.975 MHz 8.33-25 kHz Switched 10 mW Audio
VC-401C VHF Com 136.975 MHz 8.33-25 kHz Switched 20 mW Audio
VC-401C VHF Com 151.975 MHz 8.33-25 kHz Switched 20 mW Audio
VC-401C VHF Com 136.975 MHz 8.33-25 kHz Switched 40 mW Audio
VC-401C VHF Com 151.975 MHz 8.33-25 kHz Switched 40 mW Audio
Figure 11.
Publication No. 150-041955
Rev. D
Figure 12.
Figure 13.
Publication No. 150-041955
Rev. D
PRODUCT DESCRIPTION
The VNS 41A Nav System is a digital navigation system which combines
VOR/LOC, Glideslope and Marker Beacon functions, all part of the VN-411B unit.
FM immunity protection is a standard feature. The ARINC 429 digital data bus
offers compatibility with EFIS/LCD displays, the Wulfsberg RMS 555 Radio
Management System and Flight Management Systems. Additional interfaces are
provided to HSIs, CDIs and RMIs. The VN-411B converts VOR/LOC and
Glideslope information to digital format and effectively eliminates traditional CDI
needle oscillations.
Features
Includes Glideslope and Marker Beacon
Digital VOR/LOC and Glideslope Converters
FM Immunity Standard
Elimination of CDI Needle Oscillations
Digital Radial/Bearing Readout
Optional Stand-alone Control Heads (CD-413B, CVN-252, CCN-955)
Continuous Self-test
Built-in Diagnostics
ARINC 429 Digital Data Bus
Special Rotor Modulation Filter for Helicopter Operation
Publication No. 150-041955
Rev. D
Page 44
Product Guide
Description
VN-411B VOR/ILS/MB Nav,10mW Audio, RAD
VN-411B VOR/ILS/MB Nav,10mW Audio, BRG
VN-411B VOR/ILS/MB Nav, 40mW Audio, RAD
VN-411B VOR/ILS/MB Nav, 40mW, RAD, HIRF/Lightning
Figure 14.
Page 45
Product Guide
Figure 15.
Figure 16.
Publication No. 150-041955
Rev. D
PRODUCT DESCRIPTION
The DFS 43A Automatic Direction Finder is an all-digital system designed to
provide ADF navigation reception from non-directional beacons (NDB), locator
outer markers (LOM), and commercial AM broadcast stations. Through
microprocessor-controlled signal processing and a self-calibration routine, the
DFS 43A system ensures the accuracy of displayed ADF information. The
DF-431B unit can be tuned via ARINC 429 digital data bus, individual control
units, the Wulfsberg Series III RMS 555 Radio Management System, or with
Flight Management Systems. The AT-434A combined sense/loop antenna is
designed specifically for use with the DF-431B receiver. Streamlined in shape to
reduce drag, the antenna provides superior signal reception throughout all
modes of DFS 43A system operation.
Features
Left/Right Steering Guidance to/from NDB
Autopilot Interface
Half or Whole kHz Channel Spacing
Specially Designed Loop/Sense Antenna
Optional Stand-alone Control Head (CDF-552)
Continuous Self-test
Built-in Diagnostics
ARINC 429 Digital Data Bus
Improved Station Overfly Sensitivity
Publication No. 150-041955
Rev. D
Page 47
Product Guide
C41c
27.5 Vdc Aircraft Power (+/- 20%)
0.6 Amp
5.64 lbs. (2.56 kg)
-67F to 158F (-55C to +70C)
55,000 ft (16,764 m)
190.0-1860 kHz and 2181-2183 kHz (.5 kHz Spacing)
4.10 x 4.00 x 13.33 in. (104.14 x 101.6 x 338.58 mm)
Figure 17.
Description
DF-431B ADF 10mW Audio
DF-431B ADF 40mW Audio
DF-431B ADF 40mW Audio, HIRF/Lightning
AT-434A Antenna ADF
AT-434A Antenna ADF HF REJECT
AT-434A Antenna ADF HIRF/Lightning
Gasket, AT-434A, 1/8 Thick
Gasket, AT-434A, 1/4 Thick
Gasket, AT-434A, 1/8 Thick, Conductive
Gasket, AT-434A, 1/4 Thick, Conductive
Page 48
Product Guide
PRODUCT DESCRIPTION
The DMS 44A is an all-digital, triple channel scanning DME that can provide
independent DME outputs for two DME indicators or EHSI/EHADI displays, while also
providing another DME output for the Flight Management System. The third output can
also provide a single DME readout to the FMS for Rho-Theta navigation. The unit can
be tuned via ARINC 429 bus using individual control units, the Wulfsberg Series III
RMS 555 Radio Management System, or with Flight Management Systems.
Features
Simultaneous Scanning of Three Ground Stations
325 Watt Transmitter
Nav Frequency Display in DME Hold Mode
Optional Stand-alone Control Head (SD-422B)
Continuous Self-test
Built-in Diagnostics
ARINC 429 Digital Data Bus Interface
Page 49
Product Guide
C66b
27.5 Vdc Aircraft Power (+/- 20%)
1.2 Amp Max
6.4 0.10 lbs (2.9 kg)
-67F to 158F (-55C to +70C)
55,000 ft (16,764 m)
5.1 x 4.0 x 13.33 in. (129.54 x 101.6 x 338.58 mm)
Description
066-1107-01
066-1107-11
066-1107-12
066-1107-21
DM-441B DME, ARINC 429 & King Serial Bus Tuning, HIRF/Lightning
Figure 18.
Page 50
Product Guide
Description
Discontinued
in 2005
Replace
With
CVC-152 or
CCN-955
071-1341-02
CVC-152 or
CCN-955
071-1341-07
CVC-152 or
CCN-955
400-043000-0010
CVC-152 or
CCN-955
400-043000-0210
CVC-152 or
CCN-955
400-043000-0710
CVC-152 or
CCN-955
400-043000-5010
CVC-152 or
CCN-955
400-043000-5210
CVC-152 or
CCN-955
400-043000-5310
CVC-152 or
CCN-955
400-043000-5410
CVC-152 or
CCN-955
400-043000-5610
CVC-152 or
CCN-955
400-043000-5710
CVC-152 or
CCN-955
Page 51
Product Guide
Description
Discontinued
in 2005
Replace
With
CVN-252 or
CCN-955
071-1343-03
CVN-252 or
CCN-955
071-1343-08
CVN-252 or
CCN-955
071-1377-00
071-1377-01
071-1377-02
CDF-552
071-1347-07
CDF-552
071-1350-03
Page 52
Product Guide
Part Number
Description
400-042000-6111
050-02398-0000
Connector Kit
400-043000-5010
CD-402C VHF Com Control 8.33 25 kHz w/Vol Control 28V Blk
050-02372-0000
071-01356-0000
071-04047-0001
066-1101-00
050-02398-0000
Connector Kit
071-1343-00
050-02372-0000
071-01356-0000
071-04047-0001
066-1105-00
050-02398-0001
Connector Kit
071-1347-00
050-02372-0000
071-01356-0000
071-04047-0001
071-1348-00
050-02400-0000
Connector AT-434
187-01446-0000
066-1107-01
071-01357-0001
050-02398-0000
Connector Kit
071-1350-00
050-02402-0000
Page 53
Product Guide
Part Number
Description
066-04028-1002
050-02895-0000
066-04029-0102
050-02896-0000
071-00073-0100
050-03010-0000
Page 54
Product Guide
Description
050-02372-0000
050-02398-0000
050-02398-0001
050-02400-0000
050-02402-0000
050-02895-0000
050-02895-0001
050-02896-0000
050-02896-0001
050-03010-0000
071-01356-0000
071-01356-0001
071-01357-0000
071-01357-0001
071-04047-0000
071-04047-0001
400-047061-01
300-341754-01
400-047061-02
124-047060-0000
124-047060-0100
124-047060-0111
124-047060-0122
Page 55
Product Guide
Description
402-040060-0101
Page 56
Product Guide
Description
Series III
150-040990
150-040991-CD
006-00958-0008
150-040991
006-05910-0008
150-040969
150-040970-CD
006-00959-0009
150-040970
006-05911-0008
150-041616
006-05373-0000
150-041212
150-041211-CD
006-00675-0000
150-041211
150-040808
150-040807
006-05308-0000
150-041675
150-041675-CD
150-041074
006-08421-0001
100-041421
150-040984
150-040631-CD
006-00694-0009
Page 57
Product Guide
Description
150-040631
006-05907-0010
150-041299
150-042001
150-042000-CD
150-042000
150-040972
150-040973-CD
006-00956-0005
150-040973
006-05908-0006
FliteLine
150-041761
CDM-451 Installation
(Free PDF Download Available: www.Wulfsberg.com)
150-041953-CD *
150-041953 *
CDM-451 Maintenance
150-041762
150-048100 *
150-044151-CD *
150-044151 *
150-048500 *
150-048251 *
150-048251 *
150-047062-CD
150-047011
150-047062
150-047012
* Pending
Publication No. 150-041955
Rev. D
Page 58
Product Guide
Page 59
Product Guide
Channel Spacing
DESCRIPTION
In Process (PMA/STC Helicopter and Fixed Wing
Aircraft)
DO-170B Level D
DO-160D
[(B4/F1)X]BAB[S(MB)]EXXXXXZZBXZ[RR]MXXXA
FRW-2000-(VHF,UHF-1,UHF-2, 800)
Complete
Part 80.379, 87.187(l), 16K0F3E
Part 90.210, 16K0F3E, 11K0F3E, 8K10F1E, 8K0F1D
Part 90.210, 16K0F3E, 11K0F3E
Part 90, 16K0F3E, 11K0F3E, 8K10F1E, 8K0F1D
55,000 feet ASL (16,764 meters)
-22F to +140F (-30C to 60C )
-67F to +185F (-55C to 85C )
Internal Electric Fan
3.10 lbs. Max. (1.4 kg)
3.70 lbs. Max. (1.68 kg)
Dzus
3.0 Inches max. (76.2 mm)
5.75 inches max. (146.05 mm)
7.1 Inches max. (180.34 mm)
(Not Including Mating Connectors)
22.0 to 30.3 VDC
20.5 to 32.2 VDC
Not Supported
0.75 Amp Nominal. 1.20 Amp Max
2.50 Amp Nominal. 3.00 Amp Max.
0.75 Amp nominal. 1.20 Amp Max
3.50 Amp nominal. 4.00 Amp Max.
5 VDC, 5 Vrms and 28 VDC (Voltage Sense Only)
Black or Gray
240/255/512 Depending on options
Any combination of one or two bands listed below
137-174 MHz
403-470 MHz, 380-470 MHz
450-520 MHz
806-870 MHz, 764-870MHz
12.5 kHz, 20 kHz, 25 kHz
Page 60
Product Guide
DESCRIPTION
FM, P-25, P-25 Trunking, Motorola 3600 Baud Trunking
Better than .4 uV (-115 dBm)
Better than .4 uV (-115 dBm)
.6 uV (-111.5 dBm)
Not Applicable
-65 dB (NTIA Version: -70 dB)
-70 dB (NTIA Version: -80 dB)
-70 dB
-70 dB
-65 dB (NTIA Version: -70 dB)
-70 dB (NTIA Version: -85 dB)
-70 dB (NTIA Version: -85 dB)
-60 dBm
-60 dBm
100 mW into 600 ohms
>1.0 VRMS into 10k Load
>1.0 VRMS into 10k Load
< 5% at Maximum Audio Output
<-35 dB
<-60 dB
25% at Full Power
10 Watt Hi, 1 Watt Lo (2.75/1 Watt 800 MHz Band)
1.5 PPM
2.5 kHz
4.0 kHz
+5.0 kHz
< -70 dBc (-70 dBc Harmonics, -85 dBC Spurious)
-35 dB
-40 dB
.25 VMRS into 150 ohm Carbon/Carbon Equivalent
< 5%
6 dB max variation, 350 Hz to 2500 Hz
Adjustable 3dB below rated audio output
Page 61
Product Guide
400-049200-AB-CDE-WWWW-XXXX
A:
B:
C:
D:
E:
WWWW:
XXXX:
Page 62
Product Guide
Description
400-049200-11-011-1100-0000
400-049200-11-012-1100-0000
400-049200-11-011-1105-0000
400-049200-11-012-1105-0000
400-049200-11-011-1300-0000
400-049200-11-012-1300-0000
400-049200-11-011-1305-0000
400-049200-11-012-1305-0000
400-049200-11-011-1500-0000
400-049200-11-012-1500-0000
400-049200-11-011-1505-0000
400-049200-11-012-1505-0000
400-049200-11-011-2130-0000
400-049200-11-012-2130-0000
400-049200-11-011-2135-0000
400-049200-11-012-2135-0000
400-049200-11-011-2330-0000
400-049200-11-012-2330-0000
Page 63
Product Guide
Description
400-049200-11-011-2335-0000
400-049200-11-012-2335-0000
400-049200-11-011-2530-0000
400-049200-11-012-2530-0000
400-049200-11-011-2535-0000
400-049200-11-012-2535-0000
400-049200-11-011-2630-0000
400-049200-11-012-2630-0000
400-049200-11-011-2635-0000
400-049200-11-012-2635-0000
400-049200-11-011-1100-1100
400-049200-11-012-1100-1100
400-049200-11-011-1105-1105
400-049200-11-012-1105-1105
400-049200-11-011-1100-1300
Page 64
Product Guide
Description
400-049200-11-012-1100-1300
400-049200-11-011-1105-1305
400-049200-11-012-1105-1305
400-049200-11-011-1100-2630
400-049200-11-012-1100-2630
400-049200-11-011-1105-2635
400-049200-11-012-1105-2635
400-049200-11-011-2135-2135
400-049200-11-012-2135-2135
400-049200-11-011-2135-2335
Page 65
Product Guide
Description
400-049200-11-012-2135-2335
400-049200-11-011-2135-2535
400-049200-11-012-2135-2535
400-049200-11-011-2135-2635
400-049200-11-012-2135-2635
400-049200-11-011-2535-2535
400-049200-11-012-2535-2535
400-049200-11-011-2535-2335
400-049200-11-012-2535-2335
Page 66
Product Guide
Description
400-049200-11-011-2535-2635
400-049200-11-012-2535-2635
400-049200-11-011-1300-1300
400-049200-11-012-1300-1300
400-049200-11-011-1305-1305
400-049200-11-012-1305-1305
400-049200-11-011-2330-2330
400-049200-11-012-2330-2330
400-049200-11-011-2335-2335
400-049200-11-012-2335-2335
Page 67
Product Guide
Description
400-049200-11-011-2330-2630
400-049200-11-012-2330-2630
400-049200-11-011-2335-2635
400-049200-11-012-2335-2635
400-049200-11-011-2630-2630
400-049200-11-012-2630-2630
400-049200-11-011-2635-2635
400-049200-11-012-2635-2635
400-049200-11-011-0110-0000
400-049200-11-012-0110-0000
400-049200-11-011-0115-0000
400-049200-11-012-0115-0000
400-049200-11-011-0211-0000
400-049200-11-012-0211-0000
Page 68
Product Guide
Description
400-049200-11-011-0310-0000
400-049200-11-012-0310-0000
400-049200-11-011-0420-0000
400-049200-11-012-0420-0000
400-049200-11-011-0110-0110
400-049200-11-011-0110-0210
400-049200-11-011-0110-0310
400-049200-11-011-0110-0420
400-049200-11-011-0111-0111
400-049200-11-012-0111-0111
400-049200-11-011-0111-0211
400-049200-11-012-0111-0211
400-049200-11-011-0115-0225
400-049200-11-012-0115-0225
400-049200-11-011-0211-0421
400-049200-11-012-0211-0421
400-049200-11-011-0310-0310
Page 69
Product Guide
Description
400-049200-11-011-0310-0420
400-049200-11-011-0420-0420
400-049200-11-012-0420-0420
400-049200-11-011-0421-0421
400-049200-11-012-0421-0421
400-049200-11-011-0425-0425
400-049200-11-012-0425-0425
Page 70
Product Guide
Figure 19.
Page 71
Product Guide
For applications requiring single user/single transceiver operations the P-2000 with one Internal
Transceiver Module (ITM) is just the ticket. Simple, cost effective, yet power enough to get the job
done. And as always, Wulfsberg products are designed for upgrading to that second ITM if more
than one channel must be monitored or if the enhanced modes such as relay or simulcast are
desired.
For retrofit installations where only one Mic/Headset port is available on the audio system, choose a
P-2000 with dual ITMs (Internal Transceiver Modules). This will allow a single operator to monitor
two channels and still have control of all the built-in enhanced functions such as relay and simulcast.
This is an excellent choice when upgrading from legacy Wulfsberg products such as the C-962/RT9600. The P-2000 is designed to be pin for pin compatible with most C-962A/S installations which
means remove the C-962A, add the antennas and coax cable to the P-2000 and youre ready to fly!
Page 72
Product Guide
The P-2000 can also be configured for dual independent operation of each ITM (Internal Transceiver
Module). To operate in this mode, there must be two audio panel positions (e.g. FM1 and FM2).
This type of installation will allow each operator to transmit independently on their own ITM. They
can monitor each others channel via the audio panel selector switches. This system should be
considered wherever possible for new installations (as well as upgrades) since it provides the most
flexibility for multi-operator/multi-station installations.
In applications where operators are located in the front and back of the aircraft, use a combination P2000 and C-2000. Both displays show identical information and have equal capabilities. Both single
and dual audio panel connections can be incorporated but it is recommended that dual positions be
employed to allow each operator to use their own ITM (Internal Transceiver Module). The C-2000
talks to the P-2000 over a simple 2 wire bus that makes installations simple and cost effective.
Page 73
Product Guide
Page 74
Product Guide
DESCRIPTION
In Process (PMA/STC Helicopter and Fixed Wing Aircraft)
DO-170B Level D
DO-160D
[(B4/F1)X]BAB[S(CL)]EXXXXXZZBZZ[RR]MXXXA
Part 15
Complete
55,000 feet ASL (16,764 meters)
FCC
Industry Canada
Altitude
Temperature Range
Operation
Storage
Cooling
Weight
Mounting
Overall Dimensions
Height
Width
Depth
400-049300-AB-CDE
A:
Page 75
Product Guide
Figure 20.
Page 76
Product Guide
Page 77
Product Guide
DESCRIPTION
In Process (PMA/STC Helicopter and Fixed Wing Aircraft)
DO-170B Level D
DO-160D
[(B4/F1)X]BAB[S(CL)]EXXXXXZZBZZ[RR]MXXXA
FRW-2000-(VHF,UHF-1,UHF-2, 800)
Pending
Part 80.379, 87.187(l), 16K0F3E
Part 90.210, 16K0F3E, 11K0F3E, 8K10F1E, 8K0F1D
Part 90.210, 16K0F3E, 11K0F3E
Part 90, 16K0F3E, 11K0F3E, 8K10F1E, 8K0F1D
55,000 feet ASL (16,764 meters)
-22F to +140F (-30C to 60C)
-67F to +185F (-55C to 85C)
Free air circulation
2.30 lbs. Max. (1.04 kg)
2.90 lbs. Max. (1.32 kg)
Wulfsberg Mounting Tray
3.0 inches max. (76.2 mm)
5.75 inches max.(146.05 mm)
7.49 inches max (190.25 mm)
(without Connectors)
22.0 to 30.3 VDC
20.5 to 32.2 VDC
Not Supported
0.75 Amp nominal. 1.2 Amp Max
2.50 Amp nominal. 3.0 Amp Max.
0.75 Amp nominal. 1.2 Amp Max
3.50 Amp nominal. 4.0 Amp Max.
Page 78
Product Guide
Data Bus
Encryption Options
OTAR Options
Trunking Options
Receiver Specifications
Modes
Sensitivity
Analog (12 dB SINAD) (*)
Digital (5% BER) (*)
Quieting
Analog (20 dB SINAD)
Digital
Selectivity
Analog (12.5 kHz)
Analog (25.0 kHz)
Intermod Rejection
Analog (12.5)
Analog (25.0)
Spurious Rejection
Analog (12.5 kHz)
Analog (25.0 kHz)
Digital (5% BER)
Unwanted Emissions
Narrow Band
Wide Band
Audio Output
Headset Out
Normalized Out
External Speaker Out
Audio Distortion
Hum and Noise
Unsquelched
Squelched
Transmitter Specifications
Duty Cycle
RF Power Output (#)
Frequency Stability
Modulation Limiting:
12.5 kHz Channels
20.0 kHz Channels
25.0 kHz Channels
DESCRIPTION
Any combination of one or bands listed below
137-174 MHz
403-470 MHz, 380-470 MHz
450-520 MHz
806-870 MHz, 764-870 MHz
CAN Serial with Wulfsberg Proprietary Protocol
AES/DES/DES-XL/DES-OFB/AES/DVP/DVI
MDC1200 OTAR, P25 OTAR
Smartnet,Smartzone, P25
FM, P-25, P-25 Trunking, Motorola 3600 Baud Trunking
Better than .4 uV (-115 dBm)
Better than .4 uV (-115 dBm)
.6 uV (-111.5 dBm)
Not Applicable
-65 dB (NTIA Version: -70 dB)
-70 dB (NTIA Version: -80 dB)
-70 dB
-70 dB
-65 dB (NTIA Version: -70 dB)
-70 dB (NTIA Version: -85 dB)
-70 dB (NTIA Version: -85 dB)
-60 dBm
-60 dBm
100 mW into 600 ohms
>1.0 VRMS into 10k Load
>1.0 VRMS into 10k Load
< 5% at Maximum Audio Output
<-35 dB
<-60 dB
25% at Full Power
10 Watt Hi, 1 Watt Lo (2.75/1 Watt 800 MHz Band)
1.5 PPM
2.5 kHz
4.0 kHz
+5.0 kHz
Page 79
Product Guide
DESCRIPTION
< -70 dBc (-70 dBc Harmonics, -85 dBC Spurious)
-35 dB
-40 dB
.25 VMRS into 150 ohm Carbon/Carbon Equivalent
< 5%
6 dB max variation, 350 Hz to 2500 Hz
Adjustable 3dB below rated audio output
Note for both P-2000 and RT-2000: Transmit Power variation is 30% over voltage/temperature
and 50% during abnormal voltage condition. Sensitivity specification is .6uV over vibration.
Page 80
Product Guide
400-049400-AB-CDE-WWWW-XXXX
A:
B:
C:
D:
E:
Page 81
Product Guide
400-049400-11-000-1105-0000
400-049400-11-000-1300-0000
400-049400-11-000-1305-0000
400-049400-11-000-1500-0000
400-049400-11-000-1505-0000
400-049400-11-000-2130-0000
400-049400-11-000-2135-0000
400-049400-11-000-2330-0000
400-049400-11-000-2335-0000
400-049400-11-000-2530-0000
400-049400-11-000-2535-0000
400-049400-11-000-2630-0000
400-049400-11-000-2635-0000
400-049400-11-000-1100-1100
400-049400-11-000-1105-1105
Description
RT-2000 Single Transceiver, Black, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable,240 Channel
RT-2000 Single Transceiver, Black, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
Multikey Encryption (AES/DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Black, Std Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
RT-2000 Single Transceiver, Black, Std Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
Multikey Encryption (AES/DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Black, Std Display
FM1: UHF (380-470 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
RT-2000 Single Transceiver, Black, Std Display,
FM1: UHF (380-470 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
Multikey Encryption (AES/DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Black, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
RT-2000 Single Transceiver, Black, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Black, Std Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
RT-2000 Single Transceiver, Black, Std Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Black, Std Display,
FM1: UHF (380-470 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
RT-2000 Single Transceiver, Black, Std Display,
FM1: UHF (380-470 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Black, Std Display,
FM1: UHF (764-870 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
RT-2000 Single Transceiver, Black, Std Display,
FM1: UHF (764-870 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable,240 Channel
FM2: VHF (137-174 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable,240 Channel
RT-2000 Dual Transceiver, Blk, Std Display
FM1: VHF (137-174 MHz), Analog &P-25 CAI, Conventional
Front Panel Programmable,240 Channel
Multikey Encryption (AES/DES/DES-XL/DES-OFB), OTAR
FM2: VHF (137-174 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable,240 Channel
Multikey Encryption (AES/DES/DES-XL/DES-OFB), OTAR
Page 82
Product Guide
400-049400-11-000-1105-1305
400-049400-11-000-1100-2630
400-049400-11-000-1105-2605
400-049400-11-000-2135-2135
400-049400-11-000-2135-2335
400-049400-11-000-2135-2535
400-049400-11-000-2135-2635
400-049400-11-000-2535-2535
400-049400-11-000-2535-2335
Description
RT-2000 Single Transceiver, Blk, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
FM2: VHF (450-520 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
RT-2000 Dual Transceiver, Blk, Std Display
FM1: VHF (137-174 MHz), P-25 CAI, Conventional
Front Panel Programmable,240 Channel
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: VHF (450-520 MHz), P-25 CAI, Conventional
Front Panel Programmable,240 Channel
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
FM2: VHF (764-870 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
RT-2000 Single Transceiver, Blk, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: VHF (764-870 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: VHF (137-164 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (450-520 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (380-470 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: VHF (137-174 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (764-870 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: UHF (380-470 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (380-470 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: UHF (380-470 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (450-520 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
Page 83
Product Guide
400-049400-11-000-1300-1300
400-049400-11-000-1305-1305
400-049400-11-000-2330-2330
400-049400-11-000-2335-2335
400-049400-11-000-2330-2630
400-049400-11-000-2335-2635
400-049400-11-000-2630-2630
400-049400-11-000-2635-2635
Description
RT-2000 Single Transceiver, Blk, Std Display,
FM1: UHF (380-470 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (764-870 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, NVG Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
FM2: UHF (450-520 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
RT-2000 Single Transceiver, Blk, NVG Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (450-520 MHz), Analog & P-25 CAI, Conventional
Front Panel Programmable, 240 Channel
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
FM2: UHF (450-520 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
RT-2000 Single Transceiver, Blk, Std Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (450-520 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
FM2: UHF (764-870 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
RT-2000 Single Transceiver, Blk, Std Display,
FM1: UHF (450-520 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (764-870 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
RT-2000 Single Transceiver, Blk, Std Display,
FM1: UHF (764-870 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
FM2: UHF (764-870 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
RT-2000 Single Transceiver, Blk, Std Display,
FM1: UHF (764-870 MHz), Analog & P-25 CAI, 512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
FM2: UHF (764-870 MHz), Analog & P-25 CAI,512 Channel
Trunking: SmartZone/Omnilink (3600 & 9600 Baud Cntrl Chan)
Multikey Encryption (AES/ DES/DES-XL/DES-OFB), OTAR
Page 84
Product Guide
Figure 21.
Page 85
Product Guide
PRODUCT DESCRIPTION
The C-5000 Control Head can control and independently monitor any combination
of up to three of the following Transceivers: RT-5000, RT-7200, RT-9600(F),
RT-30, RT-138(F), RT-118, RT-450, and RT-406F. Two microphone and headset
ports allow for simultaneous independent operation of two radio systems. Standard
with the C-5000 are 350 preset channel memories, 99 scan group memory,
DTMF/Pulse dialing, manual frequency selection on each system, front panel
programming, and a PC database data port on the front of the unit. When multiple
radios are connected to the C-5000, a push of a button turns the aircraft into a
command and control platform capable of performing relays, simulcasts, repeater,
and full-duplex operations. All enhanced functions require that multiple radios be
connected to the C-5000.
Features
Options
Controls up to 3 Transceivers
Black or Gray Faceplate
Dual Independent Mic/Headset ports
NVG Gen III Compatible Display
350 Preset Channels
KY-58 Encryption Ready
99 Preset Scan Groups
Programmable by:
PC Database Download
Front Panel
Manual Frequency Entry
Multiple Radio enhanced modes:
Cross-Band Relay
Simultaneous Multi-radio Transmissions
Repeater
FAA PMA Certified
Page 86
Product Guide
B=
C,D,E =
Configuration Variations
31300-0101-1100
31300-0101-1110
31300-0101-1111
31300-0101-1200
31300-0101-1210
31300-0101-1211
31300-0101-1220
31300-0101-1221
31300-0101-1222
Description
C-5000 STD Display, Blk. 1 Parallel RT Control
C-5000 STD Display, Blk. 2 Parallel RT Control
C-5000 STD Display, Blk. 3 Parallel RT Control
C-5000 STD Display, Blk. 1 Serial RT Control
C-5000 STD Display, Blk. 1 Serial RT Control, 1 Parallel RT Control
C-5000 STD Display, Blk. 1 Serial RT Control, 2 Parallel RT Control
C-5000 STD Display, Blk. 2 Serial RT Control
C-5000 STD Display, Blk. 2 Serial RT Control, 1 Parallel RT Control
C-5000 STD Display, Blk. 3 Serial RT Control
31300-0201-1100
31300-0201-1110
31300-0201-1111
31300-0201-1200
31300-0201-1210
31300-0201-1211
31300-0201-1220
31300-0201-1330
31300-0201-3200
31300-0301-1200
31300-0301-1220
Page 87
Product Guide
Figure 22.
Description
C-5000 STD Display, Gry. 1 Parallel RT Control
C-5000 STD Display, Gry. 2 Parallel RT Control
C-5000 STD Display, Gry. 3 Parallel RT Control
C-5000 STD Display, Gry. 1 Serial RT Control
C-5000 STD Display, Gry. 2 Serial RT Control
C-5000 STD Display, Gry, KY-58 Encryption. 1 Serial RT Control
The C-5000 in the frequency agile control mode is limited to aircraft installations and
operation per FCC Rules 90.203(h) and 90.423.
Page 88
Product Guide
PRODUCT DESCRIPTION
The latest series of C-5000 part numbers control the new P-25 compatible versions
of the RT-5000 Transceiver and all other Wulfsberg Transceivers. A completely new
user interface makes the operation incredibly intuitive while performing even the
most complex command and control functions. These new versions of the
C-5000 can control one or two Wulfsberg Transceivers. Totally new software now
allows for 12-digit Alpha Identifier labels, which makes identifying a channel much
simpler. Two microphone and headset ports allow for simultaneous, independent
operation of two radio systems. Standard with the C-5000 are 350 preset channel
memories, DTMF/Pulse dialing, manual frequency selection on each system, front
panel programming, and a PC database data port on the front of the unit. All part
numbers of the C-5000 built to date can be easily upgraded to these new part
numbers. This version of the C-5000 is recommended for all new installations not
requiring 3-transceiver independent control.
Options
Features
Used with P-25 RT-5000s
External Encryption Ready
Controls up to Two Transceivers
Black or Gray Faceplate
Dual Independent Mic/Headset ports
NVG Gen III Compatible Display
350 Preset Channels
Programmable by:
PC Database Download
Front Panel
Manual Frequency Entry
Multiple Radio enhanced modes:
Cross-Band Relay
Simultaneous Multi-radio Transmissions
Repeater
Publication No. 150-041955
Rev. D
Page 89
Product Guide
C,D =
Configuration Variations
Description
31300-1102-1200
31300-1102-1210
31300-1102-1220
31300-1202-1200
31300-1202-1210
31300-1202-1220
31300-1202-4204
31300-1202-4224
Page 90
Product Guide
Figure 23.
The C-5000 in the frequency agile control mode is limited to aircraft installations and
operation per FCC Rules 90.203(h) and 90.423.
Page 91
Product Guide
PRODUCT DESCRIPTION
The C-1000/C-1000S Control Head is used exclusively with Wulfsberg Flexcomm I
single band Transceivers. It is capable of controlling the RT-30, RT-118, RT-138,
RT-138F, RT-450, and RT-406F model radios. Up to three single band radios may
be connected to the C-1000. The C-1000 is a fully frequency-agile Control Unit
which allows the pilot to manually dial in a transmit and receive frequency via
thumbwheel switches. In addition, the C-1000 has 30 preset channels that are
programmable from the front panel. The C-1000 is a low-cost option for operators
who prefer traditional thumbwheel switching and require limited memory channel
capacity.
Features
Simple to Operate
Controls up to Three Transceivers
30 User Programmable Presets
Manual Frequency Control
32 CTCSS Tone Control
S Model for External Encryption Control
Page 92
Product Guide
Available Configuration
Configuration Variation
400-0106-010
Description
C-1000 Flexcomm I Control, 28V BLK
Figure 24.
Page 93
Product Guide
PRODUCT DESCRIPTION
The RT-5000 AM/FM Multi-band Transceiver can take the place of six Transceivers
since it can cover the 30-50, 50-88, 118-136, 136-174, 220-400, 400-512, and 800960 MHz frequency bands with one Transceiver. In addition, a second receiver
called a guard can be added for monitoring an additional frequency. This guard
receiver can be a single channel crystal-controlled or a fully 29.7-960 MHz
synthesized version. The RT-5000 is controlled by the C-5000 control head via a
Wulfsberg proprietary serial tuning bus that reduces wiring complexity and
installation costs. Wulfsberg supplies several antenna choices that can support the
complete range of frequencies of the RT-5000 in ONE antenna. Thus, One
Transceiver, One Control Head, One Antenna solution to your communication
requirements for Public Service communications.
Features
29.7-960 MHz
10 Watts FM/15 Watts AM (Nominal)
TX Power
1.25 kHz Tuning
12.5/25/35/70 kHz IF Bandwidths
DF Interface
CTCSS/DCS
FAA PMA Certified
Options
Synthesized Guard (29.7-960 MHz)
30-50 MHz Single Channel Guard
137-174 MHz Single Channel Guard
406-512 MHz Single Channel Guard
Page 94
Product Guide
Available Configurations
Part Number
Description
400-015525-0101
400-015525-0201
400-015525-0301
400-015525-0401
400-015525-0501
Figure 25.
Page 95
Product Guide
PRODUCT DESCRIPTION
New versions of the RT-5000 Transceiver can perform P-25 digital modulation in
addition to Motorola Trunking. Up to two modules covering the VHF, UHF, and 800
MHz Trunking bands can be incorporated into the Transceiver, giving the user
unprecedented communications interoperability. In addition, numerous encryption
algorithms have been built into these modules that give optimum performance of the
AES, DES, DVP, DVI and OTAR algorithms. All new options are available as
upgrades for previous models. Contact Wulfsberg Repair and Overhaul for details.
Features
29.7-960 MHz Main Transceiver
10 Watts FM/15 Watts AM (Nominal)
TX Power
1.25 kHz Tuning
12.5/25/35/70 kHz IF Bandwidths
CTCSS/DCS Tone Squelch
FAA PMA Certified (Pending)
Options
136 174 MHz P25 Module
403 470 MHz P25 Module
380 470 MHz P25 Module
450 520 MHz P25 Module
764 870 MHz
806 869 MHz P25 Module
Encryption: DES-XL, DES-OBF,
DVP-XL, DVI-XL, AES
Page 96
Product Guide
400-015525-5111
400-015525-5211
400-015525-5311
400-015525-5411
400-015525-5511
400-015525-5611
400-015525-0711
400-015525-0811
Page 97
Product Guide
400-015525-1111
400-015525-1211
400-015525-1311
400-015525-1411
400-015525-1511
400-015525-1611
400-015525-1711
400-015525-1811
400-015525-1911
400-015525-2011
400-015525-2111
400-015525-2211
400-015525-2311
400-015525-2411
400-015525-2511
400-015525-2611
Page 98
Product Guide
400-015525-2811
400-015525-2911
400-015525-3011
400-015525-3111
400-015525-3211
400-015525-3311
400-015525-3411
Figure 26.
Figure 27.
Figure 28.
Page 100
Product Guide
Options
Single Frequency Guard
Page 101
Product Guide
Available Configurations
Configuration Variations
400-0098-000
400-0098-001
400-0098-002
Description
RT-30-0 FM Transceiver, 29.7-49.9 MHz
RT-30-1 FM Transceiver, 29.7-49.9 MHz, w/Guard RCVR
RT-30-2 FM Transceiver, 29.7-49.9 MHz, w/Guard RCVR & Guard
Tones
Figure 29.
Page 102
Product Guide
Options
Guard Receiver
Encryption Ready
High Receiver Sensitivity
Page 103
Product Guide
Available Configurations
Configuration
Variations
400-014525-00
400-014525-01
400-014525-02
400-014525-03
400-014525-50
400-014525-51
400-014525-52
400-014525-53
Description
RT-138F-0 Transceiver, 138-174 MHz
RT-138F-1 Transceiver, 138-174 MHz, w/Guard RCVR
RT-138F-2 FM Transceiver, 138-174 MHz w/Guard RCVR & Guard Tones
RT-138F-3 FM Transceiver, 138-174 MHz, HI Sensitivity
RT-138F-50 FM Transceiver 138-174 MHz, Encryption Compatible
RT-138F-51 FM Transceiver 138-174 MHz, Encryption Compatible, w/Guard
RCVR
RT-138F-52 FM Transceiver 138-174 MHz, Encryption Compatible, w/Guard
RCVR & Guard Tones
RT-138F-53 FM Transceiver 138-174 MHz, Encryption Compatible, HI
Sensitivity.
Figure 30.
PRODUCT DESCRIPTION
The RT-406F Transceiver utilizes a digital frequency synthesizer to provide FM
communications on any authorized UHF channel currently available from 406 MHz
to 511.9875 MHz. Using the C-1000 or C-5000 control unit, this Transceiver can be
operated push-to-talk duplex with a transmit frequency at one end of the band and
the receiver at the other. Changing channels is easy up to 350 preset channels
can be programmed to your assigned frequencies, or complete frequency agility is
available in the control units. The Transceivers small size and light weight is ideally
suited to small or large fixed wing aircraft and helicopters. Every production unit is
tested to assure that the severe operational requirements of rotary and fixed wing
aircraft are met, including extreme high and low temperature and vibration testing.
Features
406 511.9875 MHz
10 Watts FM TX Power
12.5 kHz Tuning
28 Volt Aircraft Power
Aircraft Audio Interfaces
32 CTCSS Tones
FAA PMA Certified
Publication No. 150-041955
Rev. D
Options
Guard Receiver
Encryption Ready
High Receiver Sensitivity
Page 105
Product Guide
Available Configurations
Configuration
Variations
400-012785-00
400-012785-01
400-012785-02
400-012785-03
400-012785-50
400-012785-51
400-012785-52
400-012785-53
Description
RT-406F FM Transceiver,406-512 MHz
RT- 406F-1 FM Transceiver,406-512 MHz, w/Guard RCVR
RT- 406F-2 FM Transceiver,406-512 MHz, w/Guard RCVR & Guard Tones
RT- 406F-3 FM Transceiver,406-512 MHz, HI Sensitivity
RT- 406F-50 FM Transceiver,406-512 MHz, Encryption Compatible
RT-406F-51 FM Transceiver,406-512 MHz, Encryption Compatible, w/Guard
RCVR
RT-406F-52 FM Transceiver,406-512 MHz, Encryption Compatible, w/Guard
RCVR & Guard /Tones
RT-406F-53 FM Transceiver, 406-512 MHz, Encryption Compatible, HI
Sensitivity.
Figure 31.
Description
AT-35 Antenna 29.7-50 MHz, 24.5 Tuned Whip, 45 DEG
AT-695 Antenna 138-174 MHz, 17 Passive Whip
AT-461 Antenna 450-470 MHz 3.5 Passive Blade, Wht
AT-462 Antenna 406-512 MHz 3.5" Passive Blade, Wht
AT-806 Antenna, 806-960 MHz, Passive Blade, Wht
AT-33 Antenna 138-174 & 400-512 MHz, Dual Band 15" Passive Blade, Wht
AT-399B Antenna 30-175 & 225-400 MHz 42" Whip
AT-50 Antenna 29.7-400 MHz, 16" Tuned Blade, Wht, GASKET & FC-50 REQ'D
AT-51 Antenna 29.7-400 MHz, 6.5" Tuned Blade, Wht, GASKET & FC-50 REQ'D
AT-160 Antenna 29.7-960 MHz, 9.5" Passive Blade, Wht
AT-160 Antenna 29.7-960 MHz, 9.5" Passive Blade, Blk
AT-400 Antenna 400-960 MHz, 5.5" Passive Blade, Wht, GASKET REQ'D
AT-560 Antenna 29.7-960 MHz, 9.5" Tuned Blade, Wht, FC-5000 REQ'D
AT-560 Antenna 29.7-960 MHz, 9.5" Tuned Blade, Blk, FC-5000 REQ'D
AT-5000 Antenna 29.7-960 MHz, 5.5" Tuned Blade, Wht, FC-5000 REQ'D
AT-5000 Antenna 29.7-960 MHz, 5.5" Tuned Blade, Blk, FC-5000 REQ'D
Gasket, AT-50
Gasket, AT-51
Gasket, AT-400
FC-50 Logic Converter (AT-50/51)
FC-5000 Antenna Tuner, AT-560 or AT-5000
Page 107
Product Guide
Figure 32.
Figure 33.
Figure 34.
Note: This tuner is used with the AT-560 and AT-5000 antennas
Publication No. 150-041955
Rev. D
Page 110
Product Guide
Figure 35.
Publication No. 150-041955
Rev. D
Figure 36.
Publication No. 150-041955
Rev. D
Figure 37.
Publication No. 150-041955
Rev. D
Figure 38.
Publication No. 150-041955
Rev. D
Figure 39.
Page 115
Product Guide
AT-560
Mic/Headset
RT-5000 Transceiver with
Synthesized Guard Receiver
C-5000
AT-560
Mic/Headset
Frequency Coverage:
Mission Profiles:
System Advantages: Two radios can be monitored simultaneously. Dual Mic/Headsets allow two
operators to use independent radios. The RT-5000 #1 Guard Receiver can monitor any frequency
between 29.7 MHz and 960 MHz. The RT-5000 #2 can operate in the 800 MHz Trunking band.
Part No.
31300-1202-1220
400-015525-1311
400-015525-0501
300-316605-01
129-216657-01
129-215344-01
129-217474-01
121-040130-01
153-040047-01
129-217321-01
129-217324-01
129-214346-01
129-217323-01
246-017812-01
Description
C-5000 Communications Management Controller
RT-5000 Transceiver with 800 MHz P25/Trunking
RT-5000 Transceiver with Synthesized Guard.
RT-5000 Vertical Mounting Tray
RT-5000 Connector
C-5000 System Interface Connector
C-5000 Serial RT Interface Connector
AT-560 29.7-960 MHz 9.5" Multiband Tuned
FC-5000 Antenna Tuner
FC-550/FC-50 J1 Connector
FC-550/FC-50 J2 Connector
FC-550/FC-50 J2 Connector
AT-550/AT-50/AT-51 Connector
Shock Mount for RT-5000 (Optional)
Page 116
Product Guide
Mic/Headset
AT-695
C-5000
RT-138F
Transceiver
Mic/Headset
AT-462
RT-406F
Transceiver
Frequency Coverage:
Mission Profiles:
Army National Guard RAID Program Upgrade
System Advantages: Two radios can be monitored simultaneously. Dual Mic/Headsets allow two
operators to use independent radios. The RT-5000 allows for coverage of all Federal Law
Enforcement channels with encryption.
Part No.
31300-1202-1210
400-015525-2411
400-014525-00
400-012785-00
300-316605-01
129-216657-01
129-215344-01
129-217474-01
129-215344-02
149-0059-000
121-040130-01
153-040047-01
121-0019-000
121-014378-01
129-217321-01
129-217324-01
129-214346-01
129-217323-01
246-017812-01
Description
C-5000 Communications Management Controller
RT-5000 Transceiver
RT-138F Transceiver
RT-406F Transceiver
RT-5000 Vertical Mounting Tray
RT-5000 Connector
C-5000 System Interface Connector
C-5000 Serial RT Interface Connector
C-5000 Parallel RT Interface Connector
IN-210-0 Flexcomm RT Install Kit
AT-560 29.7-960 MHz 9.5" Multiband Tuned
FC-5000 Antenna Tuner
AT-695 Antenna, VHF Whip
AT-462 Antenna 406-512 MHz Jet Blade
FC-550/FC-50 J1 Connector
FC-550/FC-50 J2 Connector
FC-550/FC-50 J2 Connector
AT-550/AT-50/AT-51 Connector
Shock Mount for RT-5000 (Optional)
Page 117
Product Guide
Mic/Headset
AT-560
C-5000
RT-5000 Transceiver with
138-174 MHz P25/DES Encryption
403-470 MHz P25/DES Encryption
Frequency Coverage:
Mission Profiles:
System Advantages: Covers all Federal Law enforcement Frequencies with DES TYPE III
encryption.
Part No.
31300-1202-1200
400-015525-2411
121-040130-01
153-040047-01
300-316605-01
129-215344-01
129-217474-01
129-216657-01
129-217321-01
129-217324-01
129-214346-01
129-217323-01
Description
C-5000 Communications Management Controller
RT-5000 Transceiver
AT-560 29.7-960 MHz 9.5" Multiband Tuned
FC-5000 Antenna Tuner
RT-5000 Vertical Mounting Tray
C-5000 System Interface Connector
C-5000 Serial RT Interface Connector
RT-5000 Connector
FC-550/FC-50 J1 Connector
FC-550/FC-50 J2 Connector
FC-550/FC-50 J2 Connector
AT-550/AT-50/AT-51 Connector
Page 118
Product Guide
AT-560
Mic/Headset
RT-5000 Transceiver with
138-174 MHz P25/DES Encryption
800 MHz P25/Trunking
C-5000
AT-560
Mic/Headset
RT-5000 Transceiver with
138-174 MHz P25/DES Encryption
450-520 MHz P25/Trunking
Frequency Coverage:
Mission Profiles:
Part No.
31300-1202-1220
400-015525-1411
400-015525-1811
121-040130-01
153-040047-01
300-316605-01
129-216657-01
129-215344-01
129-217474-01
129-217321-01
129-217324-01
129-214346-01
129-217323-01
Description
C-5000 Communications Management Controller
RT-5000 Transceiver
RT-5000 Transceiver
AT-560 29.7-960 MHz 9.5" Multiband Tuned
FC-5000 Antenna Tuner
RT-5000 Vertical Mounting Tray
RT-5000 Connector
C-5000 System Interface Connector
C-5000 Serial RT Interface Connector
FC-550/FC-50 J1 Connector
FC-550/FC-50 J2 Connector
FC-550/FC-50 J2 Connector
AT-550/AT-50/AT-51 Connector
Page 119
Product Guide
Description
31300-xxxx-xxxx UG
300-017305
300-016290
300-031325-01
300-031325-02
400-015525-5011 UG1
(Convert from a -0501
and below)
400-015525-5011 UG2
(Convert from a -0611
and above)
400-015525-5111 UG1
(Convert from a -0501
and below)
400-015525-5111 UG2
(Convert from a -0611
and above)
Page 120
Product Guide
Description
400-015525-5211 UG1
(Convert from a -0501
and below)
400-015525-5211 UG2
(Convert from a -0611
and above)
400-015525-5311 UG1
(Convert from a -0501
and below)
400-015525-5311 UG2
(Convert from a -0611
and above)
400-015525-5411 UG1
(Convert from a -0501
and below)
400-015525-5411 UG2
(Convert from a -0611
and above)
400-015525-5511 UG1
(Convert from a -0501
and below)
400-015525-5511 UG2
(Convert from a -0611
and above)
Page 121
Product Guide
Description
400-015525-5611 UG1
(Convert from a -0501
and below)
400-015525-5611 UG2
(Convert from a -0611
and above)
400-015525-0711 UG
400-015525-0911 UG
400-015525-1111 UG
400-015525-1311 UG
400-015525-3111 UG
400-015525-2811 UG
400-015525-0611 UG
400-015525-0811 UG
400-015525-3211 UG
RT-5000 Transceiver
FM1: 29.7-960 MHz FM/AM Analog
FM2a: UHF (403-470 MHz), P-25 CAI, SmartZone Trunking
Multikey Encryption (DES/DES-XL/DES-OFB), OTAR
Page 122
Product Guide
Description
400-015525-1011 UG
400-015525-1211 UG
400-015525-2911 UG
400-015525-2611 UG
400-015525-2711 UG
400-015525-3011 UG
400-015525-1511 UG
400-015525-1911 UG
400-015525-2311 UG
400-015525-1411 UG
Page 123
Product Guide
Description
400-015525-1711 UG
400-015525-1811 UG
400-015525-2111 UG
400-015525-2211 UG
400-015525-2511 UG
400-015525-1611 UG
400-015525-2011 UG
400-015525-2411 UG
Page 124
Product Guide
Description
311-049700
402-015348-1117
Description
129-214346-01
129-215344-01
129-215344-02
129-216657-01
129-217321-01
129-217323-01
129-217324-01
129-217474-01
129-041397-01
129-041398-01
129-049115-01
129-049116-01
149-015345-1100
149-015345-1200
149-015345-1300
149-0058-000
149-0059-000
149-0059-001
246-017812-01
300-2194-000
300-316605-01
300-316835-01
149-041389-01XX *
404-041382-01XX *
152-241520-01
124-015911-02
124-049082-01
Page 125
Product Guide
Description
153-041054-01
153-041055-01
153-041056-01
153-041057-01
153-041058-01
300-341192-01
300-341193-01
300-341194-01
D037000Y00
Connector Backshells
124-041326-01
Description
300-049065-01
149-249093-25
149-249093-15
129-041810-01
129-041811-01
129-049080-01
129-049081-01
129-049112-01
129-049113-01
124-049082-01
Page 126
Product Guide
Description
150-040011
C-1000 Installation
(Free PDF Download Available: www.Wulfsberg.com)
150-0104-000
150-041966-CD
150-041966
C-1000 Maintenance
150-040868
150-040868-CD
150-040894
150-1355-000
150-041629-CD
150-041118
150-041629 *
006-08821-0002
150-040127-CD
150-041714
C-5000/RT-5000 Installation
(Free PDF Download Available: www.Wulfsberg.com)
150-040127
C-5000 Maintenance
150-1352-000
C-5000 Operator
(Free PDF Download Available: www.Wulfsberg.com)
150-041102
150-040497
150-041103
150-041103SPNSH
150-041374
150-040163
150-0099-000
150-040011
150-041954
Page 127
Product Guide
Description
150-040084
100-040484
150-1426-000
100-049102
150-049004-CD
150-049106
150-049004 *
150-049105
150-0101-000
RT-138 Maintenance
150-040699
150-040699-CD
150-040893
150-040893-CD
150-0100-000
RT-30 Maintenance
150-1332-000
RT-406F Maintenance
150-041244
150-041244-CD
150-0102-000
RT-450 Maintenance
150-041459
150-041459-CD
150-041121
RT-5000 Maintenance
150-041121-CD
* Pending
Page 128
Product Guide
Description
006-08834-0000
Flitefone VI Operator
(Free PDF Download Available: www.Wulfsberg.com)
150-1362-000
150-1364-000
150-040218
C-962N Operator
(Free PDF Download Available: www.Wulfsberg.com)
150-0073-000
C-722/962 Maintenance
150-041352-CD
150-041352
150-0061-000
RT-9600 Installation
150-1335-000
150-0129-000
150-0058-000
RT-9600 Maintenance
150-0130-000
150-040219-CD
150-040219
150-0082-000
RT-7200 Maintenance
150-0060-000
WCS-100 Installation
006-05394-0000
WT-100 Maintenance
006-05395-0000
WR-100 Maintenance
150-0109-000
WT-200B Installation
150-0110-000
WT-200B Maintenance
150-0118-000
WCS-300B Installation
150-0113-001
WCS-300B Maintenance
150-0128-000
150-0127-000
WCS-400 Maintenance
Page 129
Product Guide
WULFSBERG ELECTRONICS
PRODUCT GUIDE
APPENDIX A
Page A-1
Product Guide
WULFSBERG ELECTRONICS
Chelton Avionics, Inc. (d.b.a. Wulfsberg Electronics)
Prescott, Arizona
TERMS AND CONDITIONS OF SALE
APPLICABILITY
Except for the application of overriding General Terms Agreements previously executed between Purchaser and Seller,
any purchase Order covering the sale of Seller products contained in this catalog ("Order") shall be governed solely by
these Terms and Conditions of Sale ("Conditions of Sale") and any other written provisions mutually agreed upon. Any
oral understandings are expressly excluded. Seller shall not be deemed to have waived these Conditions of Sale if it fails
to object to any additional or conflicting provisions appearing on, incorporated by reference in, or attached to Purchasers
Purchase Order Form which provisions are hereby expressly rejected. Purchasers silence or acceptance or use of
products constitutes its acceptance to these Conditions of Sale. No modification or addition to these Conditions of Sale
shall be effective unless agreed to in writing and signed by an authorized representative of Purchaser and Seller. This
catalog and price list does not constitute an offer. Seller reserves the right to reject any Order submitted for its
acceptance.
DELIVERY
Delivery shall be made within the time specified on the face of an Order or within Sellers lead-time, whichever is later.
Transportation charges shall be prepaid and Purchaser shall reimburse Seller upon receipt of an invoice for such
charges. Title and risk of loss shall pass to Purchaser upon delivery of the products at the FOB/FCA point, identified as
Sellers dock, unless as otherwise agreed upon in writing by Seller.
CHANGES
Seller at all times reserves the right, and is entitled in its sole discretion without consent of Purchaser, to make changes,
additions or improvements to the products being delivered under an Order without liability or obligation to incorporate
such changes, additions or improvements in any item manufactured, sold or delivered prior to incorporation of the
change, addition or improvement.
The Purchaser may, at any time, request changes within the scope of this Order in the drawings, designs, specifications,
shipping or packing instructions or place of delivery. All such requests must be approved by the Seller and if any such
changes cause an increase or decrease in the cost of, or the time required for performance of this Order affected by such
change, an equitable adjustment in the price, the delivery schedule or both shall be made and the Order shall be
modified accordingly.
Page A-2
Product Guide
SETOFF
All amounts that Purchaser owes Seller under an Order shall be due and payable according to the terms of an Order.
Purchaser is prohibited from and shall not set off such amounts or any portion thereof, whether or not liquidated, against
sums which Purchaser asserts are due it, its parent affiliates, subsidiaries or other divisions or units under other
transactions with Seller, its parents, affiliates, subsidiaries or other divisions or units.
EXCUSABLE DELAY
Seller shall be excused from delays in delivery and performance of other contractual obligations under an Order caused
by acts or omissions that are beyond the reasonable control and without the fault or negligence of Seller including but not
limited to Government embargoes, blockades, seizure or freeze of assets, delays or refusals to grant an export license or
the suspension or revocation thereof, or any other acts of any Government, fires, floods, severe weather conditions, or
any other acts of God, quarantines, labor strikes or lockouts, riots, strife, insurrection, civil disobedience, war, material
shortages or delays in deliveries to Seller by third parties. If the excusable delay circumstances extend for six months,
either party may, at its option, terminate an Order without penalty or liability and without being deemed in default or in
breach thereof. Alternately, the parties may resolve the matter on mutually agreeable terms.
CANCELLATION
Purchaser reserves the right to cancel any portion of an Order affected by a default of Seller or any insolvency or
suspension of Sellers operations or any petition filed or proceeding commenced by or against Seller under any state or
federal law relating to bankruptcy, arrangement, reorganization, receivership or assignment for the benefit of creditors.
Equipment must have been shipped from WULFSBERG ELECTRONICS within the past ninety (90)
days.
2.
Equipment must be in NEW condition and must not have been installed in aircraft.
3.
DISPUTES
Except as otherwise specifically agreed in writing by Purchaser and Seller, any dispute relating to an Order placed by a
Purchaser incorporated in the United States which is not resolved by the parties shall be adjudicated by any court of
competent jurisdiction. For Orders placed by a Purchaser incorporated outside the United States, the parties shall resort
to binding arbitration under mutually agreed procedures.
APPLICABLE LAW
An Order shall be interpreted in accordance with the laws of the jurisdiction in which the Sellers facility accepting the
Order hereunder is located, exclusive of any choice of law provisions. The Purchaser and Seller expressly agree to
exclude from this Agreement the United Nations Convention on Contracts for the International Sale of Goods, 1980, and
any successor thereto.
LIMITATION OF LIABILITY
Sellers liability for any loss or damage arising out of, connected with, or resulting from an Order, or from the performance
or breach thereof, or from the design, development, manufacture, sale, delivery, resale, repair or use of any product
covered by or furnished under an Order shall in no case exceed the price allocable to the product, or part thereof, or
service that gives rise to the claim.
Notwithstanding anything in an Order to the contrary, Seller will not be liable for any special damages, indirect damages,
incidental damages, consequential damages, loss of profits, loss of revenues or loss of use of any property or capital of
Buyer or any third party, even if the possibility of such damages has been disclosed to Seller in advance or could have
been reasonably foreseen by Seller.
These exclusions of types of damages and limitations on the amount of damages set forth shall apply regardless of the
theory of liability, whether based on contract, indemnity, warranty, tort, negligence, strict liability or any other legal theory.
These exclusions of types of damages shall be deemed independent of, and shall survive, any failure of the essential
purpose of any limited remedy under the terms of an Order.
Page A-3
Product Guide
PATENT INDEMNITY
Except insofar as an Order calls for products pursuant to Purchasers designs, drawings or specifications,
Seller agrees to pay the amount of any final judgment against Purchaser resulting from a suit claiming that
any commercial products manufactured or furnished hereunder, by reason of their manufacture, sale or use,
infringes any United States patent which has issued at date of an Order, and Purchasers reasonable costs
and expenses in defense of such suit if Seller does not undertake the defense thereof, provided Seller is
promptly notified of the threat or commencement of such suit and is offered full and exclusive control to
conduct the defense or settlement thereof. Sellers indemnity shall not apply where infringement would not
have occurred from the normal use for which the products were designed. No responsibility is assumed for
actual or alleged infringement of any foreign patent. Sellers liability for damages hereunder is limited to
those computed solely on the value of any products sold to Purchaser hereunder. In no event shall Seller be
liable for consequential damages or costs applicable thereto. In the event any product to be furnished under
an Order is to be made in accordance with drawings, samples or manufacturing specifications designated by
Purchaser and is not the design of Seller, Purchaser agrees to defend, indemnify and hold Seller harmless to
the same extent and subject to the same requirements as set forth in Sellers obligation to Purchaser as
above. The above is in lieu of any other indemnity or warranty, express or implied by Seller, with respect to
intellectual property (patents, trade secrets, mask works, trademarks, copyrights, or the like).
In the event of any claim that a product furnished hereunder infringes any United States patent, Seller may at
its option and expense (a) procure for Purchaser the right to continue using the product, or (b) replace or
modify the product so that it becomes non-infringing, or (c) grant Purchaser a credit for such product, less a
reasonable depreciation for use, damage, and obsolescence upon its return to Seller. Purchaser agrees to
pay all costs and expenses incurred by Seller in its defense and the amount of any judgment against Seller,
in any suit or proceeding against Seller based upon a claim of infringement, resulting solely from the
Purchaser combining any product furnished hereunder with any item not manufactured or furnished by Seller
or from the sale or use of any such combination by Purchaser. Seller shall also indemnify Purchasers
Purchasers and agents for such infringement, if and to the extent that Purchaser has agreed so to indemnify
them, but to no greater extent than Seller has indemnified Purchaser herein and under the same conditions
as set forth herein.
In the event any product to be furnished under an Order is to be made in accordance with drawings, samples
or manufacturing specifications designated by Purchaser and is not the design of Seller, Purchaser agrees to
defend, indemnify and hold Seller harmless to the same extent and subject to the same requirements as set
forth in Sellers obligation to Purchaser as above. The above is in lieu of any other indemnity or warranty,
express or implied by Seller, with respect to intellectual property (patents, trade secrets, mask works,
trademarks, copyrights, or the like).
SOFTWARE LICENSE
In the event that any software or software documentation is provided to Purchaser by Seller in any form whatsoever
under an Order and no software license agreement governing this sale has been signed between Purchaser and Seller,
Purchaser agrees to accept the terms and conditions stated below effective the date of the first delivery hereunder:
A.) Subject to the terms and conditions herein, the Seller grants to Purchaser a limited, nonexclusive, nontransferable
license to use the software or software documentation provided herein: (i) in the course of the normal operation in or with
Seller products which are installed, or are intended to be installed, on aircraft, (ii) in the analysis or the formatting of
reports using data from such Seller products or, (iii) on Seller or non-Seller products that are used to test, maintain,
download, or process information compiled by Seller products.
B.) Making copies of software or documentation, except for one copy for archive purposes, is prohibited unless
specifically authorized by Seller in writing. Should such copying be authorized, Purchaser will reproduce and include all
Seller proprietary and copyright notices and other legends in the same manner that Seller provides such notices and
legends, both in and on every copy of licensed software and documentation and in any form.
Page A-4
Product Guide
C.) The software license and rights granted by Seller to Purchaser hereunder are personal to Purchaser. The licensed
software and documentation may not be sub-licensed, transferred, or loaned to any other party without Sellers prior
express written consent, except that Purchaser may transfer the licensed software and documentation in conjunction with
the resale of any flight equipment or Seller supplied test equipment in which the licensed software and documentation is
installed or with which it is used. Such permission to transfer is contingent upon the resale or transfer of Purchasers
agreement to use and protect the confidentiality of the licensed software and documentation under the same or similar
terms as those set forth in this software license. Purchaser will, however, notify Seller in writing of the transfer of the
licensed software and documentation authorized pursuant to this section.
D.) Purchaser agrees to utilize all licensed software and documentation only as authorized herein. Purchaser may not
either itself or with the assistance of others, make modifications to the licensed software and documentation, including,
but not limited to, translating, decompiling, disassembling or reverse assembling, reverse engineering, creating derivative
or merged works, or performing any other operation on licensed software and documentation to recover any other
operation on licensed software and documentation to recover any portion of the program listing, object code or source
code or any information contained therein.
E.) Purchaser agrees to accept and retain licensed software and documentation in confidence. Purchaser agrees to take
appropriate action by instruction, agreement or otherwise with Purchasers employees, or agents or other persons who
are permitted access to licensed software and documentation as follows to inform said employees, agents or other
persons who may come into contact with it of the confidential nature of licensed software and documentation; and to
satisfy its obligations under this software license with respect to use, copying, and protection and security of licensed
software and documentation.
F.) This software license is effective as of the date of first delivery hereunder and shall continue until terminated by
Purchaser for any reason whatsoever upon thirty (30) days prior written notice to Seller, provided Purchaser ceases
using and either returns or destroys Seller software and documentation; or by Seller, if Purchaser does not comply with
any of the terms and conditions of this software license and Purchaser fails to remedy such failure within thirty (30) days
after having received notice from Seller of such failure.
G.) Notwithstanding the warranties provided elsewhere herein, Purchaser acknowledges that licensed software and
documentation may be aircraft or sensor specific and, as such, may require reasonable adjustment or refinement to suit
Purchasers specific requirements. Purchaser shall provide reasonable aid to Seller in accomplishing such adjustments
and refinements. Such reasonable adjustments or refinements shall commence on the date of delivery and be provided
by Seller to Purchaser for a period not to exceed ninety (90) days unless otherwise provided for in writing.
H.) Purchaser agrees that it will not use the license software and documentation in the performance of a contract, or
subcontract, with any Government in a manner so as to affect Seller rights to licensed software and documentation. If
Purchaser desires to use the licensed software or documentation in the performance of a contract or subcontract with a
Government, prior to such use, Purchaser shall consult with Seller as to the procedures and use of restrictive markings
required to protect the ownership interest of Seller.
I.) This license and sale is subject to the laws and regulations, and other administrative acts, now or hereinafter in effect,
of the United States and other governments and their departments and agencies relative to the exportation and/or reexportation of licensed software and documentation. Purchaser acknowledges that it will be responsible for compliance
as necessary with such laws, regulations and administrative acts.
J.) Seller agrees to use reasonable efforts to secure any licenses or permits as may now or hereafter be required by the
U.S. Government in connection with the performance of Seller obligations under an Order, but this will not be deemed to
require any performance on the part of Seller which cannot lawfully be done pursuant to the laws, regulations and acts
referred to above.
Page A-5
Product Guide
EXPORT
Unless otherwise agreed in writing, or as set forth in these Conditions of Sale, Purchaser shall be responsible for
compliance with the export control laws and regulations of the United States, and when required by such laws and
regulations shall obtain export and re-export licenses required for goods, services and technical data delivered under an
Order. Seller shall not be liable to Purchaser for any failure to provide goods, services or technical data as a result of any
following U.S. Government actions: (1) refusal to grant export or re-export license; (2) cancellation of export or re-export
license; or (3) any subsequent interpretation of U.S. export laws and regulations, after the date of an Order, that limits or
has a material adverse effect on the cost of Sellers performance on an Order.
TAXES
The prices quoted herein do not include sums necessary to cover any taxes or duties including but not limited to Federal,
State, Municipal excise, sales or use taxes or import duties upon the production, sales, distribution, or delivery of goods
or furnishing of services hereunder. Any taxes or duties that are due and owing hereunder shall be paid by the
Purchaser. Accordingly, Seller reserves the right to revise its price after the execution of an Order between the parties to
include any and all taxes or duties that may become due hereunder and Seller may invoice Purchaser for said additional
amount. This clause shall survive the acceptance and complete performance of an Order by the parties herein.
NON-ASSIGNMENT
The Purchaser shall not transfer or assign in whole or in part this Order or any rights or interests hereunder without the
prior written consent of Seller.
WAIVER
Failure by Seller to assert all or any of its rights upon any breach of an Order shall not be deemed a waiver of such rights
either with respect to such breach or any subsequent breach, nor shall any waiver be implied from the acceptance of any
payment or service. No waiver of any right shall extend to or affect any other right Seller may possess, nor shall such
waiver extend to any subsequent similar or dissimilar breach.
SEVERABILITY
If any provision of these Conditions of Sale is determined to be illegal, invalid, or unenforceable, for any reason, then
such provision shall be deemed stricken for purpose of the dispute in question, and all other provisions shall remain in full
force and effect.
WARRANTY
DEFINITIONS
Nonconformance: Failure to comply with or failure to operate due to noncompliance with Sellers applicable drawings or
having defects in workmanship or material. Normal wear and tear and the need for regular overhaul and periodic
maintenance shall not constitute a Nonconformance.
Product: End items, line replaceable units and components thereof, including those returned for exchange or repair.
Seller warrants that at time of delivery to Purchaser, its products will comply with applicable Sellers drawings and will be
free from defects in workmanship and material. These warranties shall run to the Purchaser, its successors, assigns, and
Purchasers. This warranty is valid as follows:
NEW PRODUCTS
Wulfsberg Electronics Products - One (1) years from date of delivery to end Purchasers, provided that this
delivery occurs within fifteen (15) months of shipment from Seller.
REFURBISHED/USED EQUIPMENT
Wulfsberg Electronics Products - Six (6) months from date of shipment from the Seller.
Page A-6
Product Guide
REPAIRED EQUIPMENT
Wulfsberg Electronics Products Three (3) months limited warranty from date of shipment from the Seller.
Purchaser must notify Seller in writing of the Nonconformance of any Product within the warranty period and return the
Product to Seller within thirty (30) days after such discovery.
Seller agrees to assume round trip transportation costs for a nonconforming Product in an amount not to exceed normal
(non express) shipping charges within the continental United States or to the nearest authorized avionics repair facility for
warranty repair of products delivered under an Order. All import/export fees, taxes, duties, customs fees, documentation
fees, and clearance fees shall remain the responsibility of the Purchaser. Please contact Wulfsberg Electronics to obtain
a freight courier account number for prepaid shipping of the return.
Should a Purchaser return a non-conforming product via a designated prepaid shipping courier and subsequently the
product is determined to be out-of-warranty or warranty is invalid, Wulfsberg Electronics will invoice the Purchaser for
repair costs plus round-trip freight charges.
The risk of loss and damage to all Products in transit shall be borne by the party initiating the transportation of such
Products. Seller's obligation and Purchaser's remedy under this warranty is limited to either repair or replacement, by
Seller's election, of any Product Nonconformance. All items repaired or replaced hereunder shall be warranted only for
the unexpired portion of the original warranty period.
Seller shall not be liable under this warranty if the Product has been exposed or subjected to:
1.
Any maintenance, repair, installation, handling, transportation, storage, operation or use which is improper or
otherwise not in compliance with Seller's instruction; or
2.
Any alteration, modification or repair by anyone other than Seller or those specifically authorized by Seller; or
3.
Any accident, contamination, foreign object damage, abuse, neglect or negligence after delivery to Purchaser;
or
4.
Any damage precipitated by failure of a Seller supplied Product not under warranty or by any Product not
supplied by Seller.
Seller's obligations under this warranty are conditioned on Purchaser's obligation to maintain records which will
accurately reflect operating time and maintenance performed on Seller's Product and establish the nature of any
unsatisfactory condition of Seller's Product. Seller, at its request, shall be given access to such records for substantiating
warranty claims.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN OR ORAL,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE WHICH ARE HEREBY EXPRESSLY DISCLAIMED.
IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO EXTENSION OF
THIS WARRANTY SHALL BE BINDING UPON SELLER UNLESS SET FORTH IN WRITING AND SIGNED BY
SELLER'S AUTHORIZED REPRESENTATIVE.
Page A-7
Product Guide
WULFSBERG ELECTRONICS
Chelton Avionics, Inc. (d.b.a. Wulfsberg Electronics)
Prescott, Arizona
WARRANTY STATEMENT
A.
Aviation products manufactured by Wulfsberg Electronics Division of Chelton Avionics, Inc. under the brand
names Wulfsberg Electronics and/or Chelton are warranted against defects in design, material or
workmanship caused by Wulfsberg or its authorized agent(s) for the Warranty Period as defined in Paragraph
(B) of this statement which occur under normal and intended use and service, subject to all of the qualifications
and conditions hereinafter stated.
Purchaser must notify Seller in writing of the Nonconformance of any Product within the warranty period and
return the Product to Seller within thirty (30) days after such discovery.
Seller agrees to assume round trip transportation costs for a nonconforming Product in an amount not to exceed
normal (non express) shipping charges within the continental United States or to the nearest authorized avionics
repair facility for warranty repair of products delivered under an Order.
All import/export fees, taxes, duties, customs fees, documentation fees, and clearance fees shall remain the
responsibility of the Purchaser. Please contact Wulfsberg Electronics to obtain a freight courier account number
for prepaid shipping of the return.
B.
The Warranty Period for products shall begin upon the date of shipment from the factory and shall end 15
months thereafter.
Warranty coverage is only offered to Purchasers who make warranty claims within fifteen (15) months
of the product's factory shipping date.
Where applicable, OEMs Demonstration or Stock aircraft usage is restricted to 25 hours service if a
NEW (FAR-21) 8130-3 serviceable tag is required. Any product returned for warranty repair with more
than 25 hours of service will be issued a (FAR-145) Repair Station RETURN TO SERVICE tag. In
making this determination, the Purchaser is responsible for supplying total number of hours of
equipment usage to the Seller.
Extended Warranty Coverage
Warranty coverage for products otherwise not eligible by reason of expiration of the fifteen (15) month
period specified above may again become eligible for warranty protection, provided (a) that warranty
registration occurs within (20) months of the product's factory shipping date and (b) that the product is
submitted to Wulfsberg Electronics for inspection and certification and then the promulgated Wulfsberg
Electronics extended warranty certification fee is paid.
C.
Any product Wulfsberg Electronics finds to be in violation of the warranty as set out in Paragraph (A) hereof, at
the option of Wulfsberg Electronics, may be repaired, replaced, or exchanged, in accordance with the following
procedures:
1.
If Purchaser returns a product for warranty repair action and Seller determines that the product is
ineligible under provisions of Paragraph (D) below, the Purchaser will be notified and shall have the
option of having the product repaired, replaced, or exchanged at Purchasers expense or to have the
product returned without repair. In either case, Purchaser shall be responsible for all transportation
charges.
2.
The risk of loss or damage to all products in transit shall be borne by the party initiating
the transportation of such products unless the Purchaser makes a request for a specific mode of
transportation. In such case, the risk of loss and the cost of shipment shall be borne by the Purchaser.
All items repaired or replaced hereunder shall be warranted for the unexpired portion of the original Warranty
Period.
Page A-8
Product Guide
D.
This warranty specifically excludes defects which Wulfsberg Electronics determines to be the result of:
1.
2.
3.
4.
E.
THE WARRANTY AS SET OUT IN PARAGRAPH (A) IS THE ONLY WARRANTY FOR WULFSBERG
ELECTRONICS PRODUCTS AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE WHICH ARE HEREWITH EXPRESSLY EXCLUDED AND DISCLAIMED.
F.
The remedies as set out in Paragraph (C) hereof state the entire liability of Wulfsberg Electronics and constitute
the sole and exclusive remedy of the Purchaser. Wulfsberg Electronics shall not be liable for any other claim,
loss, or damage, including but not limited to, incidental, consequential, or other kinds of damages whether
based on contract, tort, negligence, or other theory of product liability.
G.
Wulfsberg Electronics reserves the right to make design changes, additions to, and improvements in its
products without the obligation to install same in products previously manufactured.
H.
Wulfsberg Electronics reserves the right, in the best interest of the Purchaser, to exchange a unit with another of
equal or greater value to meet airworthiness requirements.
I.
All costs incurred by the Purchaser for the removal and reinstallation of equipment pursuant to the warranties
set forth above shall be the sole responsibility of the Purchaser.
Page A-9
Product Guide
WULFSBERG ELECTRONICS
Chelton Avionics, Inc. (d.b.a. Wulfsberg Electronics)
Prescott, Arizona
INTERNATIONAL PRODUCT RETURN POLICY AND PROCEDURES
The following guidelines are offered to reduce the time to ship equipment to Wulfsberg Electronics from
international facilities.
-Shipping "in bond" to Prescott, AZ.
Goods shipped to WULFSBERG ELECTRONICS, whether for return, repair (warranty or
non-warranty), overhaul, exchange, or for any other reason, must be cleared through U.S. Customs.
WULFSBERG ELECTRONICS will pay for the customs entry charges, broker services, and customs
duties only when Customs clearance is made at Arizona Customs Broker, telephone +1 602-2730912. We ask that shipment be made "in bond" to Phoenix, Arizona with customs clearance by:
Arizona Customs Broker
2323 E. Magnolia Suite 119
Phoenix, Arizona 85034
USA
WULFSBERG ELECTRONICS has a long-standing business relationship with our customs broker,
Arizona Customs Broker in Phoenix, Arizona, who is familiar with our products and able to assist us
when there are problems in customs clearance. Marking your shipment to clear U.S. Customs in
Phoenix, Arizona, the closest customs facility to us, enables you to ship directly to Phoenix, Arizona,
where your items are picked up by us from the carrier's facility.
If your shipment is directed to New York, San Francisco, Houston, or some other point, it usually
results in additional expense and delay. The coastal ports are more congested and we may not be
notified promptly (and sometimes not at all) of your shipment. The customs brokers may not be
familiar with our products and may need to contact us for additional information. Arrangements for
onward shipment to Prescott, Arizona may have to be made, adding to the delay and expense and
increasing the risk that the shipment may be misdirected.
-Door-to-Door Courier Services
WULFSBERG ELECTRONICS will work with international courier services if we are contacted by
them and assist them in U.S. Customs clearance by providing information on our products should
questions arise. *All charges for door-to-door service, including Customs clearance, must be prepaid
by the shipper unless alternative arrangements are approved in advance by WULFSBERG
ELECTRONICS.
*Generally, courier services file U.S. Customs clearance at their own location and will not send on to
Phoenix for clearance.
-Documentation
All shipments to WULFSBERG ELECTRONICS must be accompanied by an invoice containing, at
minimum, the following information:
1.
Proper description and identification of goods, including model, part number, and serial
number.
Page A-10
Product Guide
2.
3.
4.
Country of origin of goods. (Not all Wulfsberg Electronics products are of U.S. manufacture.)
5.
Value of goods in U.S. Dollars (if no charge, indicate value for U.S. Customs).
6.
7.
The following notification statement must appear on the invoice and waybill:
Ship in bond with U.S. Customs clearance in Phoenix, AZ. Notify:
Arizona Customs Broker
Telephone: +1 602 273-0912
8.
The "Ship to/Consign to" address on your documents and packages must be:
WULFSBERG ELECTRONICS
6400 Wilkinson Drive
Prescott, AZ 86301-6164
U.S.A.
Equipment must have been shipped from WULFSBERG ELECTRONICS within the past
ninety (90) days.
2.
Equipment must be in new condition and not have been installed in aircraft.
3.
Page A-11
Product Guide
Page A-12
Product Guide