Beruflich Dokumente
Kultur Dokumente
JOB TITLE:
Electrical Engineer
LOCATION:
Saudi Arabia
The Electrical Engineer, you will be responsible for commissioning and start-up of high voltage,
medium voltage, equipment and day-to-day electrical issues.
Review commissioning and start up strategies for electrical equipment, monitor work activities to
ensure effectiveness and adherences to scope and Electrical Standards. Ensure spare parts
descriptions are correct for critical equipment.
Lead development and review of site procedures and engineering standards.
Review design basis for interlocks, electrical power distribution, area classification, and National
Electrical Code compliance, and/or all governing or adopted codes, as needed.
Review, and approved electrical specifications and design drawings/calculations within scope of
the project.
Provide technical suggestions for engineering contractors on electrical power systems.
The Electrical Engineer, you will be responsible for commissioning and start-up of high voltage,
medium voltage, equipment and day-to-day electrical issues.
Review commissioning and start up strategies for electrical equipment, monitor work activities to
ensure effectiveness and adherences to scope and Electrical Standards.
Ensure spare parts descriptions are correct for critical equipment.
Lead development and review of site procedures and engineering standards.
Review design basis for interlocks, electrical power distribution, area classification, and National
Electrical Code compliance, and/or all governing or adopted codes, as needed.
Review, and approved electrical specifications and design drawings/calculations within scope of the
project.
Provide technical suggestions for engineering contractors on electrical power systems.
Obtain the Commissioning managers alignment regarding the system boundaries and MC dates.
Participation in the review of P&IDs and control strategies in view of commissioning, start-up and
safe operation of the power plants.
Perform pre-set to Work check out of system for safety, and technical readiness.
Preparing the system for Set to Work (switchgear positions prior to start up & during start up, exc)
Perform all pre-Set to Work inspection, complete & sign off all appropriate forms.
PERSON SPECIFICATION
Skills Requirement:
Qualifications:
Bachelor's degree in Electrical Engineering in an accredited program
Experience:
Minimum requirement for this position is 10 years experience within a large power plant facility, as
an Electrical Engineer.
Experience with power plant design and project engineering, or utilities a plus.
Experienced in Generator testing and synchronization, including GIS, SCADA,
132 KV, 380 KV, transformers and medium voltage electrical switchgear.
Experienced with Emergency Diesel Generator commissioning test.
Mastery of the theory of operations of major equipment and a working knowledge of high voltage
and medium voltage electrical distribution systems.
Knowledge of a variety of test equipment and test methods employed to test and troubleshoot
electrical equipment.