Beruflich Dokumente
Kultur Dokumente
Key Benefits
High-speed protection algorithm for enhanced stability with trip times of 0.75 power cycle
Superior CT saturation detector capable of detecting CT saturation even with only 2 msec of
saturation free current for enhanced stability during fault conditions
Cost-effective alternative to high impedance schemes protection
Advanced automation capabilities for providing customized protection and control solutions
Advanced IEC 61850 Ed. 2 implementation, complete settings via SCL files and IEC 61850-9-2 process
bus solution enable resource and platform managing optimization and reduce cost of ownership
Increased network availability via failover time reduced to zero through IEC 62439-3 PRP support
CyberSentry provides high-end cyber security aligned to industry standards and services (NERC CIP,
AAA, Radius, RBAC, Syslog)
Advanced fault and disturbance recording, including internal relay operating signals, eliminating the
need for external recording devices
Applications
Re-configurable and pre-defined bus arrangements for simple bus applications, up to 6 feeders and 2
differential zones with breaker failure
Integrated bus protection and metering for HV and EHV substations
Communications
3 independent Ethernet ports for simultaneous
& dedicated connections with IEEE 1588 support
Supported industry protocols: IEC 61850 Ed.
2, SFTP, MMS File Transfer Service, DNP 3.0,
Modbus Serial/TCP, IEEE 1588, IEC 60870-5-104
and 103, PRP, SNTP, HTTP, TFTP
Direct I/O: secure, high-speed exchange of
data between UR relays
Cyber Security
CyberSentry provides high-end cyber security
aligned to industry standards and services
(NERC CIP, AAA, Radius, RBAC, Syslog)
Setting for security audit trails, tracking
changes to device configurations
The B30 is the single point for protection, control, metering, and monitoring in one integrated
device that can easily be connected directly into DCS or SCADA monitoring and control systems like
Viewpoint Monitoring.
50P
27
50P
50P
27
50P
51P
51P
51P
51P
50N
50N
50N
50N
51N
51N
51N
51N
50G
50G
50G
50G
51G
51G
51G
51G
50BF
50BF
50BF
50BF
Metering: current,
voltage, and frequency
Zone 1
87B
50/87
50/74
87B
50/87
50/74
Zone 2
GEDigitalEnergy.com
DEVICE
NUMBER
FUNCTION
27P
49
50BF
50G
50N
50P
50/74
50/87
51G
51N
51P
59N
59X
87B
Phase Undervoltage
Thermal Overload
Breaker Failure Protection
Ground Instantaneous Overcurrent
Neutral Instantaneous Overcurrent
Phase Instantaneous Overcurrent
CT Trouble
Unrestrained Bus Differential
Ground Time Overcurrent
Neutral Time Overcurrent
Phase Time Overcurrent
Neutral Overvoltage
Auxiliary Overvoltage
Restrained Bus Differential
Backup Protection
External Check-Zone
B30 system.
IOC Functions: Two separate IOC functions
are available for trip supervision or other
user-configurable applications
TOC: One TOC function is incorporated for
each CT input of the relay. Up to 6 TOCs
are available for backup protection. The
TOC function can use standard or userprogrammable curves
Voltage Supervision: up to two undervoltage
elements are available per each VT input
of the relay. This function may be used to
supervise the current-based protection
functions for extra security.
Advanced Automation
The B30 incorporates advanced automation
features including powerful FlexLogic
programmable logic, communication, and
SCADA capabilities that far surpass what
is found in the average bus relay. The B30
integrates seamlessly with other UR relays for
complete system protection.
External Fault:
Even with heavy CT saturation and with only 1 msec of saturation free current,
B30 is stable for through faults. See the directional comparison element
output, which adds additional security to the bus differential function.
Internal Fault:
For internal faults the CT saturation flag is not set and the directional element
output is safely ignored, resulting in an operating time of less than 10 msec.
GEDigitalEnergy.com
Fault Reports
- Powerful summary report of pre-fault and
fault values
The very high sampling rate and large amount
of storage space available for data recording
in the B30 can eliminate the need for installing
costly stand-alone recording equipment.
FlexLogic
FlexLogic is the powerful UR-platform
programming logic engine that provides
the ability to create directional comparison
customized protection and control schemes,
minimizing the need and associated costs
of auxiliary components and wiring. Using
FlexLogic, the B30 can be programmed to
provide required tripping logic along with
custom scheme logic for breaker control,
transfer tripping schemes for remote breakers
and dynamic setting group changes.
Scalable Hardware
The B30 is available with a multitude of I/O
configurations to suit the most demanding
application needs. The expandable modular
design allows for easy configuration and future
upgrades.
Multiple CT/VT configurations allow for the
implementation of many different schemes
Flexible, modular I/O covering a broad range
of input signals and tripping schemes
Types of digital outputs include triprated Form-A and Solid State Relay (SSR)
mechanically latching, and Form-C outputs
Form-A and SSR outputs available with
optional circuit continuity monitoring and
current detection to verify continuity and
health of the associated circuitry
GEDigitalEnergy.com
Communications
LAN Redundancy
EnerVista Software
The EnerVista suite is an industry-leading set
of software programs that simplifies every
aspect of using the B30 relay. The EnerVista
suite provides all the tools to monitor the status
of the protected asset, maintain the relay, and
integrate information measured by the B30 into
DCS or SCADA monitoring systems. Convenient
COMTRADE and SOE viewers are an integral part
of the UR setup software included with every UR
relay, to carry out postmortem event analysis
and ensure proper protection system operation.
Multi-Language
GEDigitalEnergy.com
EnerVista Launchpad
Viewpoint UR Engineer
EnerVista Integrator
Brochures
Application Notes
Wiring Diagrams
Guideform
Specifications
FAQs
Service Bulletins
OPC/DDE Server
GE Multilin Drivers
Automatic Event Retrieval
Automatic Waveform Retrieval
User Interface
Viewpoint Maintenance
Viewpoint Monitoring
Multi-Language
Display
English
Trending Reports
Automatic Event Retrieval
Russian
French
Chinese
Turkish
German
User-Programmable Pushbuttons
GEDigitalEnergy.com
Typical Wiring
I
I
I
H3
V
I
H4
V
I
H5
V
I
H6
Digital Energy
Multilin
U1
B30
B30-H00-HCL-F8H-L8H-N6A-S8H-U6H
U2
V
I
U3
V
I
I
U5
V
I
U6
N1
6A
SURGE
N2
N3
N4
N7a
N7c
N8a
N8c
N7b
N8b
Fibre
* Optic
Tx1
SURGE
10BaseFL
Rx1
Tx2
10BaseFL
Rx2
Shielded
IA5
F1a
IA
F1b
IA1
F1c
IB5
F2a
IB
F2b
IB1
F2c
IC5
F3a
IC
F3b
IC1
F3c
IA5
F5a
IA
F5b
IA1
F5c
IB5
F6a
IB
F6b
IB1
F6c
IC5
F7a
IC
F7b
IC1
F7c
NORMAL
COM
1
ALTERNATE
IA5
L1a
IA
L1b
IA1
L1c
IB5
L2a
IB
L2b
IB1
L2c
IC5
L3a
IC
L3b
IC1
L3c
IA5
L5a
IA
L5b
IA1
L5c
IB5
L6a
IB
L6b
IB1
L6c
IC5
L7a
IC
L7b
IC1
L7c
IA5
S 1a
IA
S 1b
IA1
S 1c
IB5
S 2a
IB
S 2b
IB1
S 2c
IC5
S 3a
IC
S 3b
IC1
S 3c
10BaseT
D1a
D2a
D3a
D4b
D4a
RS485
com
BNC
Co-axial
BNC
Co-axial
B1b
B1a
B2b
B3a
B3b
B5b HI
B6b LO
B6a
B8a
B8b
DC
IRIG-B
Input
IRIG-B
Output
CRITICAL
FAILURE
Remote
Device
F1
F2
U4
U8b
N1a
N1b
N1c
N2a
N2b
N2c
N3a
N3b
N3c
N4a
N4b
N4c
N5a
N5c
N6a
N6c
N5b
6H
SURGE
U1a
U1b
U1c
U2a
U2b
U2c
U3a
U3b
U3c
U4a
U4b
U4c
U5a
U5b
U5c
U6a
U6b
U6c
U7a
U7c
U8a
U8c
U7b
Dry
A B C
H2
H8b
Wet
H1
6H
H1a
H1b
H1c
H2a
H2b
H2c
H3a
H3b
H3c
H4a
H4b
H4c
H5a
H5b
H5c
H6a
H6b
H6c
H7a
H7c
H8a
H8c
H7b
IA5
S 5a
IA
S 5b
IA1
S 5c
IB5
S 6a
IB
S 6b
OUTPUT
IB1
S 6c
CONTROL
POWER
IC5
S 7a
IC
S 7b
IC1
S 7c
SURGE
FILTER
F3
F4
F5
F6
Minimum
X
PROVIDED
Inputs/
outputs
*
CT
*
Inputs/
outputs
*
CT
*
Inputs/
outputs
CT
CPU
Power
Supply
(Rear View)
B30-H00-HCL-F8H-H6H-L8H-N6A-S8H-U6H
GEDigitalEnergy.com
Ordering
B30 - * ** - H * * - F ** - H ** - L ** - N ** - S ** - U ** - W **
For Full Sized Horizontal Mount
Base Unit
B30 Base Unit
CPU E
RS485 + RS485 (IEC 61850 option not available)
G RS485 + 10BaseF
H RS485 + Redundant 10BaseF
J RS485 + multimode ST 100BaseFX
K RS485 + multimode ST Redundant 100BaseFX
N RS485 + 10/100 BaseT
T
RS485 + three multimode SFP LC 100BaseFX. Req FW v7xx or higher
U RS485 + two multimode SFP LC 100BaseFX + one SFP RJ45 100BaseT. Req FW
v7xx or higher
V
RS485 + three SFP RJ45 100BaseT. Req FW v7xx or higher
Software Options 00 No Software Options
(see note 1 below) 03 IEC 61850
A0
CyberSentry UR Lvl 1. Req UR FW 7.xx or higher
B0
IEEE 1588. Req UR FW 7.xx or higher
C0 PRP
D0
IEEE 1588 + CyberSentry UR. Req UR FW 7.xx or higher
Mount/Coating H Horizontal (19" rack)
A
Horizontal (19" rack) - Harsh Chemical Environment Option
User Interface C Basic Front Panel with English Display
I Enhanced German Front Panel
J
Enhanced German Front Panel with User-Programmable Pushbuttons
K Enhanced English Front Panel
L Enhanced English Front Panel with User-Programmable Pushbuttons
M Enhanced French Front Panel
N Enhanced French Front Panel with User-Programmable Pushbuttons
Q Enhanced Russian Front Panel
T Enhanced Russian Front Panel with User-Programmable Pushbuttons
U Enhanced Chinese Front Panel
V Enhanced Chinese Front Panel with User-Programmable Pushbuttons
W Enhanced Turkish Front Panel
Y Enhanced Turkish Front Panel with User-Programmable Pushbuttons
Power Supply H 125 / 250 V AC/DC
(see note 2 below) H RH
125/250 V AC/DC with redundant 125/250 V AC/DC power supply
L 24 - 48 V (DC only)
CT/VT DSP 8L 8L 8L Standard 4CT/4VT w/ enhanced diagnostics
8M 8M 8M Sensitive Ground 4CT/4VT w/ enhanced diagnostics
8N 8N 8N Standard 8CT w/ enhanced diagnostics
8R 8R 8R Sensitive Ground 8CT w/ enhanced diagnostics
IEC 61850 Process Bus 81 8 Port IEC 61850 Process Bus Module
Digital I/O XX XX XX No module
4A 4A 4A
4 Solid State (No Monitoring) MOSFET Outputs
4C 4C 4C
4 Solid State (Current w/opt Voltage) MOSFET Outputs
4D 4D
4D 16 Digital Inputs with Auto-Burnish
4L 4L 4L
14 Form-A (No Monitoring) Latchable Outputs
67 67 67 8 Form-A (No Monitoring) Outputs
6C 6C 6C 8 Form-C Outputs
6D 6D
6D 16 Digital Inputs
6E 6E 6E
4 Form-C Outputs, 8 Digital Inputs
6F 6F 6F 8 Fast Form-C Outputs
6K 6K 6K
4 Form-C & 4 Fast Form-C Outputs
6L 6L 6L
2 Form-A (Current w/ opt Voltage) & 2 Form-C Outputs, 8 Digital Inputs
6M 6M 6M
2 Form-A (Current w/ opt Voltage) & 4 Form-C Outputs, 4 Digital Inputs
6N 6N 6N
4 Form-A (Current w/ opt Voltage) Outputs, 8 Digital Inputs
6P 6P 6P
6 Form-A (Current w/ opt Voltage) Outputs, 4 Digital Inputs
6R 6R 6R
2 Form-A (No Monitoring) & 2 Form-C Outputs, 8 Digital Inputs
6S 6S 6S
2 Form-A (No Monitoring) & 4 Form-C Outputs, 4 Digital Inputs
6T 6T 6T
4 Form-A (No Monitoring) Outputs, 8 Digital Inputs
6U 6U 6U
6 Form-A (No Monitoring) Outputs, 4 Digital
6V 6V 6V
2 Form-A (Cur w/ opt Volt) 1 Form-C Output, 2 Latching Outputs, 8 Digital Inputs
Transducer I/O 5A 5A 5A
4 dcmA Inputs, 4 dcmA Outputs
5F 5F 5F 8 dcmA Inputs
Inter-Relay Communications 2B
C37.94SM, 1300nm singlemode, ELED, 2 Channel singlemode
2I Channel 1 - IEEE C37.94, 820nm, multimode fiber, 64/128 kbps;
Channel 2 - 1300 nm, singlemode, LASER
2J Channel 1 - IEEE C37.94, 820nm, multimode , 64/128 kbps; Channel 2 - 1550 nm,
singlemode, LASER
7A
820 nm, multimode, LED, 1 Channel
7B
1300 nm, multimode, LED, 1 Channel
7C
1300 nm, singlemode, ELED, 1 Channel
7H
820 nm, multimode, LED, 2 Channels
7I
1300 nm, multimode, LED, 2 Channels
7J
1300 nm, singlemode, ELED, 2 Channels
7S
G.703, 2 Channels
7W
RS422, 2 Channels
77
IEEE C37.94, 820 nm, multimode, LED, 2 Channel
Ordering Notes:
1. To view all available model order codes, options for B30 or to order the UR Classic Front Panel, please visit GEs On-Line Store at http://store.gedigitalenergy.com/viewprod.asp?model=B30
2. Redundant power supply only available in horizontal unit. If redundant is chosen, must be same type. Maximum 2 per chassis
GEDigitalEnergy.com
IEC is a registered trademark of Commission Electrotechnique Internationale. IEEE is a registered
trademark of the Institute of Electrical Electronics Engineers, Inc. Modbus is a registered trademark of
Schneider Automation. NERC is a registered trademark of North American Electric Reliability Council.
NIST is a registered trademark of the National Institute of Standards and Technology.
GE, the GE monogram, Multilin, FlexLogic, EnerVista and CyberSentry are trademarks of General Electric
Company.
GE reserves the right to make changes to specifications of products described at any time without notice
and without obligation to notify any person of such changes.
Copyright 2015, General Electric Company. All Rights Reserved.
GEA-12748B(E)
English
150203