Beruflich Dokumente
Kultur Dokumente
UFID: 12533187
Course Code: EEE 6374
Date: 1/21/2015
Always remember to check whether your calculation is in dB or linear scale, and the unit of power
is mW (dBm) or W (dBW).
Question 1. (2pt) RF Energy Harvesting: Based on the new 2005 IEEE RF Safety Standard (IEEE
Std C95.1-2005), calculate the maximum power (in mW) received by a 10 GHz /2-dipole
antenna in a room if the room is equipped with a 10 GHz wireless power transmitter producing
uniform linearly polarized electromagnetic field at MPE limit of action level (general public).
Assume the antenna is lossless.
Answer 1. From the lecture notes 4 (Slide 15); the permitted maximum power density of the
new 2005 IEEE RF Safety Standard (IEEE Std C95.1-2005) is 1mW/cm2.
Question 2. (2pt) A 60 GHz radio is transmitting 500 mW through the TX antenna with 12 dB
gain, to the RX antenna of identical properties located at 2 km away. (a)(1pt) Assume the wireless
link is LOS, at sea level, clear weather, 1 atm, 20C, and water vapor of 7.5 g/m3. Calculate the
received power. (b)(1pt) Now the weather changes and it starts raining with 10 mm/hour
(additional attenuation of 5 dB/km). Calculate the received power.
Answer 2.
Question 5. (2pt) A 10 GHz monostatic radar detects an approaching airplane at 80 km away and
the received reflected signal is -112 dBm. When the airplane is 20 km away, what is the received
reflected signal?
Answer 5.