Sie sind auf Seite 1von 25

JADUAL I (SCHEDULE I)

Type Approval Performance Requirements (G/N - Machinery/Commercial Vehicle)

Item
No.

Subject

Particulars of
instrument or other
documents
containing
requirements

Power to weight
ratio

Rule of the motor


vehicle (C&U)1959.
(Minimum 6hp/t)

Indicator
Performance

E.C.E R6

Brake Lamp
Performance

E.C.E R7

Brake Performance

E.C.E R13

Safety Belt
Anchorages

M.S 1175
E.C.E R14

Exhaust emission
(Petrol/LPG/CNG
engine)

Peraturan-Peraturan
Kualiti Alam Sekeliling
(Kawalan Pelepasan
Daripada Enjin Petrol)
1996.
E.C.E R15 / R83

Seats

E.C.E R17

Protection Against
Unauthorised Use

M.S 1742
E.C.E R18 / R97 /
R116

Smoke emission
(diesel engine)

Peraturan-Peraturan
Kualiti Alam Sekeliling
(Kawalan Pelepasan
Daripada Enjin Disel)
1996.
E.C.E R24 / R49

10

Head Restraint

E.C.E R25

11

Audible Warning
Device

E.C.E R28

Nature of
requirement

Date of
application

Item
No.

Subject

Particulars of
instrument or other
documents
containing
requirements.
M.S. 1394
E.C.E. R30 / R54
FMVSS 119

11

Tyres

12

Speedometer

E.C.E.R39

13

Safety Glass

M.S 595
E.C.E R43

14

Rear View Mirrors

E.C.E R46

15

HID Head Lamp


Performance
(if any)

M.S ISO 303


E.C.E R48 / R98 /
R99

16

Noise Emission

Peraturan-Peraturan
Kualiti Alam Sekeliling
(Bunyi Bising
Kenderaan Motor)
1987.
E.C.E R51

17

Rear Underrun
Protection (if any)

E.C.E R58

18

Rear Marking
Plates for Slow
Moving Vehicles (if
any)

E.C.E R69

19

Rear Marking
Plates for Heavy
and Long Vehicles
(if any)

E.C.E R70

20

Lateral Protection
(if any)

E.C.E R73

21

Steering Equipment

E.C.E R79

22

Front Underrun
Protection (if any)

E.C.E R93

23

Protection of the
Occupants in the
Event of a Lateral
Collision (if any)

E.C.E R95

Nature of
requirement

Date of
application

Item
No.

Subject

Particulars of
instrument or other
documents
containing
requirements.

24

Battery Electric
Vehicles
(if any)

E.C.E R100

25

Retro-reflective
Markings for Heavy
and Long Vehicles
(if any)

E.C.E R104

Head Lamp
Performance

E.C.E R112 / R113

26

SCHEDULE II
3

Nature of
requirement

Date of
application

APPLICATION FOR TYPE APPROVAL OF MOTOR VEHICLE

Reference No

Date of submission.
Part 1: General Information
1.

Applicant's name and address


__________________________________
__________________________________
__________________________________
__________________________________
__________________________________

2.

Make (Manufacturer) : _______________


Model Name : ______________________
Model Code : ______________________
Model Year : ______________________

3.

Type and configuration body :

4.

Country of manufacture
__________________________________

5.

Proposed usage
__________________________________

Part II. Specifications


(*)

1.

Please state/specify performance


MS/SCE/ADR/JIS/other.

standard

according

to

Dimensions
(a)

Overall length (mm)

_____________________

(b)

Overall width (mm)

_______________________

(c)

Overall height (mm)

(d)

Wheel base (mm)

(e)

(f)

(g)

(h)

_____________________
_______________________

i.

Between first and second axles

______________________

ii.

Between second and third axles

_____________________

iii.

Between third and fourth axles

_____________________

Ground clearance (mm)


i.

Unladen

_____________________

ii.

Fully laden

_____________________

Wheel treads (mm)


i.

Front axles

_____________________

ii.

Rear axles

_____________________

Body overhang (mm)


i.

Front end

_____________________

ii.

Rear end

_______________________

Chassis frame overhang (mm)


(For chassis-cab model)
i.

Front end

_____________________

ii.

Rear end

_____________________

(i)

(j)
2.

Minimum turning circles (mm)


i.

Kerb to kerb

______________________

ii.

Body to body

______________________

Gravity height (mm)

______________________

Weight
(a)

Kerb Weight (kg)


i.

Front axles

________________________

ii.

Rear axles

______________________

(b)

Number of axles

(c)

Axle Rating

(d)

______________________

i.

Front axles (kg)

______________________

ii.

Rear first axles (kg)

_______________________

iii.

Rear second axles (kg)

______________________

Design gross vehicle weight (kg)

______________________

3.

Maximum stable inclination angle

________________________

4.

Seating capacity (person)

_______________________

5.

Drive: Front wheel/Rear wheel/4 wheel

______________________

6.

Spacing for the display of registration number plate:

7.

Front .....................

______________________

Rear .....................

______________________

Engine
(a) Name of producer

______________________

(b) Type and model

______________________

(c) Position of mounting

_______________________

d)

Type of fuel

(e)

Engine capacity

_______________________

(f)

Cycle

_______________________

(g)

No of cylinder

_______________________

(h)

Cylinder arrangement

_______________________

(i)

Bore X Stroke

_______________________

(j)

Piston Displacement

_______________________

(k)

Valve arrangement

_______________________

(l)

Compression ratio

_______________________

(m)

Max. net power (KW @ r.p.m.)

_________________________

(n)

Max. net torque (kN m @ r.p.m)

________________________

(o)

Type of supercharger
or turbocharger

_______________________

(p)

Emission gas control system

_______________________

(q)

Lubricating system

(r)

_________________________

(i)

Lubricating method

_______________________

(ii)

Type of oil pump

_______________________

(iii)

Type of oil filter

________________________

(iv)

Capacity of lubricating oil (l)

_______________________

(v)

Type of oil cooler

_________________________

Cooling system
(i)

Cooling method

________________________

(ii)

Type of radiator

_______________________

(iii)

Capacity of cooling water

_______________________

(iv)

Type of water pump

_______________________

(v)

Type of thermostat

________________________
7

8.

Fuel system
(a)

(b)

(c)

(d)

(e)

(f)

Fuel tank
(i)

Material

_______________________

(ii)

Capacity (litre)

_______________________

(iii)

Position

_______________________

Fuel Pump
(i)

Type

________________________

(ii)

Flow rate

________________________

Fuel Filter
(i)

Type

_______________________

(ii)

Flow rate

_______________________

Fuel Injection
(i)

Type

_______________________

(ii)

Model

______________________

(iii)

Method

______________________

Carburetor
(i)

Type

_______________________

(ii)

Diameter of throttle valve (mm)

_______________________

(iii)

Diameter of venture (mm)

_______________________

(iv)

Type of choke valve

_______________________

Air cleaner
(i)

Type

_______________________

(ii)

Number

_______________________

(g)

9.

LPG/NGV/CNG equipment
(i)

Make and Model of LPG/NGV/CNG kit

____________________

(ii)

Make and model of container

___________________

(iii)

Capacity of container

___________________

(iv)

Supplier and authorised installer

___________________

Transmission system
(a)

Type of clutch

____________________

(b)

No. of speed

____________________

(c)

Type of transmission

____________________

(d)

Torque convertor pressure

(e)

Gear ratio (to 1)

_____________________

1 st gear

___________________

2nd gear

___________________

3rd gear

___________________

4th gear

_____________________

5th gear

____________________

6th gear

___________________

Reverse gear

___________________

Differential gear

____________________

Wheel hub reduction

___________________

10.

Running system
(a)

Front axle type

___________________

(b)

Rear axle type

___________________

(c)

Tyre size

(d)

(e)

(f)

(g)

(i)

Front tyre

___________________

(ii)

Rear tyre

___________________

(iii)

Spare tyre

_____________________

Rim size
(i)

Front wheel

___________________

(ii)

Rear wheel

___________________

(iii)

Spare wheel

___________________

Optional tyre and rim size


(i)

Front wheel

___________________

(ii)

Rear wheel

___________________

(iii)

Spare wheel

___________________

Air pressure
(i)

Front wheel

___________________

(ii)

Rear wheel

___________________

(iii)

Spare wheel

___________________

Ply rating
(i)

Front wheel

___________________

(ii)

Rear wheel

____________________

(iii)

Spare wheel

___________________

10

(h)

11.

Maximum load on tyre


(i)

Front wheel

___________________

(ii)

Rear wheel

___________________

(iii)

Spare wheel

____________________

Suspension system
(a) Front axle

(b)

(i)

Type of suspension

___________________

(ii)

Type of spring

____________________

(iii)

Material of spring

___________________

(iv)

Dimensions of main spring

____________________

(v)

Number of main spring

(vi)

Dimensions of auxiliary spring

___________________

(vii)

Number of auxiliary spring

____________________

_____________________

Rear axle
(i)

Type of suspension

____________________

(ii)

Type of spring

___________________

(iii)

Material of spring

___________________

(iv)

Dimensions of main spring

___________________

(v)

Number of main spring

___________________

(vi)

Dimensions of auxiliary spring

____________________

(vii)

Number of auxiliary spring

____________________

11

(c)

(d)

12.

Type of shock absorber


(i)

Front wheel

__________________

(ii)

Rear wheel

__________________

(iii)

Name of producer

__________________

Type of stabilizer
(i)

Front wheel

__________________

(ii)

Rear wheel

__________________

(iii)

Name of producer

__________________

Steering System
(a)

Steering wheel positions (LHS/RHS)

(b)

Front wheel alignment


(i)

(c)

(d)

Amount of side slip

__________________

___________________

Booster
(i)

Type

(ii)

Name of producer

_____________________
____________________

Locking device
(i)

Type

__________________

(ii)

Name of producer

__________________

(iii)

Mounting position

__________________

12

13.

Brake System
(a)

Service brake (Attached test report for service brake)


(i) Type
-Front

___________________

-Rear

___________________

(ii)

Size of brake

___________________

(iii)

Control system and


No. of braking wheel

___________________

(iv)

Brake pipes/hoses
-Material

(v)

(vi)

(vii)

(b)

___________________

Booster
-Type

___________________

-Magnification

___________________

Braking efficiency
-Front

___________________

-Rear

___________________

Other safety device incorporated


(ABS/SLIPS/LSD or others)

__________________

Parking brake (Attached test report for service brake)


(i)

Type

___________________

(ii) Braking efficiency


-Front

___________________

-Rear

___________________

13

(c)

(d)

(e)

14.

15.

16.

Auxiliary brake (if any)


(i)

Type

__________________

(ii)

Performance*

__________________

Emergency brake (if any)


(i)

Type

__________________

(ii)

Performance*

__________________

Separate brake (if any)


(i)

Type

__________________

(ii)

Performance*

__________________

Chassis frame
(a)

Type

__________________

(b)

Cross section dimension

__________________

(c)

Type of material

__________________

(d)

Type of side protection device

(e)

Sample of chassis code number

___________________

(a)

Type

__________________

(d)

Any back protection device

__________________

__________________

Body

Equipment for passengers


(a)

Seat belt anchorage


(i)

Type

__________________

(ii)

Number

__________________

(iii)

Performance*

__________________

14

(b)

(c)

(d)

17.

Seat belt
(i)

Name of producer

___________________

(ii)

Type

___________________

(iii)

Number

___________________

(iv)

Performance*

___________________

Head restraint
(i)

Name of producer

___________________

(ii)

Type

___________________

(iii)

Number

___________________

(iv)

Performance*

___________________

(i)

Type

___________________

(ii)

Number

(iv)

Performance*

Doors

____________________
___________________

Glass
(a)

Front windscreen
(i)

Name of producer

___________________

(ii)

Kind/Type of glass

___________________

(iii)

Thickness

___________________

(iv)

% of light transmission

____________________

(v)

Performance*

___________________

15

(b)

(c)

18.

Side windows
(i)

Name of producer

____________________

(ii)

Kind/Type of glass

___________________

(iii)

Thickness

___________________

(iv)

% of light transmission

___________________

(v)

Performance*

___________________

Rear screen
(i)

Name of producer

____________________

(ii)

Kind/Type of glass

___________________

(iii)

Thickness

__________________

(iv)

% of light transmission

__________________

(v)

Performance*

__________________

Noise prevention device


(a)

(b)

Silencer
(i)

Name of product

__________________

(ii)

Type

__________________

(iii)

Number

__________________

Noise level (dBA)


(i)

(ii)

(iii)

Stationary
(Attached test report and method test)

__________________

Accelerated running
(Attached test report and method test)

__________________

Performance*

_________________

16

19.

Exhaust emission control device (Attached test report)


(a)

Type

__________________

(b)

Position and direction


of exhaust pipe opening

__________________

HSU level/K Value/Opacimeter Value


(free accelerated test)

__________________

(d)

CO

__________________

(e)

HC

(f)

NOx

(g)

H2O

(h)

CO

(i)

HC

(j)

NOx

(k)

H2O

(l)

Performance*

(c)

20.

)
)
) idling mode
)
)
)
)

__________________
__________________
__________________

)
) as per
) ECE
) 15.04
)
)
)

__________________
__________________
__________________
___________________
__________________

Electrical System
(a)

Operating voltage

__________________

(b)

Type of Ignition system

__________________

(c)

Type of electric wave noise suppression


or prevention device

__________________

(d)

(d)

Spark Plug
(i)

Type

__________________

(ii)

Gap

___________________

Battery capacity (AH)

_________________

17

(e)

(f)

21.

Charging system
(i)

Type

___________________

(ii)

Output

__________________

Starting system
(i)

Type

__________________

(ii)

Output

__________________

Lighting equipment
(a)

Head lamps
(i)

Name of producer

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Automatic or manual
low and high adjuster

__________________

Performance*

__________________

(v)
(b)

(c)

__________________

Front fog lamps


(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

__________________

Front turning lamps


(i)

Name of producer

____________________

(ii)

Type

(iii)

Numbers, colour ...watts

(iv)

Rate of flashing

__________________

(v)

Performance*

___________________

__________________

18

____________________

(d)

(e)

(f)

(g)

(h)

Front side turning lamps


(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

__________________

Daytime running lamps


(i)

Name of producer

___________________

(ii)

Type

(iii)

Numbers, colour ...watts

(iv)

Performance*

__________________
____________________
__________________

Rear reflex reflector


(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

__________________

High mount stop lamps (3rd brake light)


(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

__________________

Tail lamps
(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

________________
19

(i)

(j)

(k)

(l)

Stop lamps
(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

__________________

Rear turning lamps


(i)

Name of producer

___________________

(ii)

Type

___________________

(iii)

Numbers, colour ...watts

___________________

(iv)

Performance*

___________________

(v)

Rate of flashing

___________________

Hazard light (front/rear)


(i)

Name of producer

___________________

(ii)

Type

___________________

(iii)

Numbers, colour ...watts

___________________

(iv)

Performance*

___________________

(v)

Rate of flashing

___________________

Passenger compartment lamp


(i)

Name of producer

____________________

(ii)

Type

__________________

(iii)

Number and colour

__________________

(iv)

Performance*

__________________

20

(m)

(n)

(o)

(p)

(q)

Back -up lamps


(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

__________________

License lamps (front/rear)


(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

__________________

Rear fog lamps


(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

__________________

Rear side marker lamps


(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Numbers, colour ...watts

__________________

(iv)

Performance*

__________________

Goods compartment lamps


(i)

Name of producer

_________________

(ii)

Type

_________________

(v)

Numbers, colour,.....watts

_________________

(iv)

Performance*

_________________
21

22.

Warning device
(a)

23.

(i)

Name of producer

__________________

(ii)

Type

__________________

(iii)

Level of loudness

__________________

(iv)

Performance*

__________________

Rear view mirror (Automatic or manual adjustment)


(a)

(b)

(c)

24.

Horn

Left
(i)

Type

__________________

(ii)

Dimension and radius curvature

___________________

Right
(i)

Type

__________________

(ii)

Dimension and radius curvature

__________________

Inside
(i)

Type

__________________

(ii)

Dimension and radius curvature

___________________

(iii)

One way or two ways adjustment

___________________

Wipers
(a)

Type

___________________

(b)

Number

___________________

(c)

Performance*

___________________

22

25.

Meters and dash board


(a)

(b)

(c)

(d)

26.

Speedometer
(i)

Type

(ii)

Performance*

___________________
_____________________

Tachometer
(i)

Type

___________________

(ii)

Performance*

___________________

Odometer
(i)

Type

__________________

(ii)

Performance*

__________________

Other meter fitted


(i)

Type

__________________

(ii)

Performance*

__________________

Other accessories fitted


(a)

________________________

(b)

________________________

(c)

________________________

(d)

________________________

(e)

________________________

23

Part III. Other Information


The following documents shall be submitted:1.

Chassis frame strength calculation (not necessary for the monocoque body
frame.
The strength calculation shall be attached.
Please specify the standard adopted.
Note: The measurement by strain gauge etc. may be substituted for
strength calculation.

2.

Braking Ability Calculation


The braking test data by test vehicles may be substituted for braking ability
calculation.
Please specify the standard adopted.

3.

Test data/ reports to be attached


The test data/ report as per the requirement as stipulated in schedule 1 of the
motor vehicles (Type Approval and Recalling) rules 1998 shall be attached.

I hereby certify that to the best of my knowledge, the above information are correct and I
fully understand that should any of the above information is found to untrue, the
application may be rejected or the type approval certificate, if issued, may be cancelled
or suspended.

Date:

(Signature)
Name:
Position:

24

BORANG MAKLUMAT SIJIL KELULUSAN JENIS


KENDERAAN
(VEHICLE TYPE APPROVAL)
BUATAN
NAMA MODEL
KOD MODEL
MODEL TAHUN
JENIS / PREFIX
NOMBOR ENJIN
KAPASITI / KUASA
ENJIN ( KW)

. / ,
..Cylinder, Stroke

BAHAN BAKAR ( RON)


BILANGAN TEMPAT
DUDUK
TRANSMISI ( Speed)
JENIS BADAN
KEGUNAAN
KOD BUATAN
NEGARA PEMBUAT
(CBU/CKD)
NAMA & ALAMAT
PEMOHON

Pengesahan Syarikat

(Nama Syarikat:
)

25

Das könnte Ihnen auch gefallen