Beruflich Dokumente
Kultur Dokumente
The Red Valve Series G Knife Gate Valve features a cast iron body with
stainless steel wetted parts. This efficient valve design affords the user a
high-quality valve in which all the wetted parts, including the gate, seat,
packing gland and flange face are stainless steel while providing cost
savings with cast iron flanges.
The Series G has a double-lead ACME thread that reduces operating torque.
A special ring-shaped, multilayer packing gland is combined with elastomer
to ensure a tight seal. The gate corners are machined with chamfered edges
so that the corners of the gate do not wear the packing. The chamfered edge
and elastomer seal packing gland prevent packing wear. These valves are
manufactured to handle a wide variety of fluids in chemical plants, pulp and
paper mills, wastewater treatment plants, mining operations, sugar mills and
foodprocessing facilities. Seat Max. Operating Rate of
Material Temperature Leakage
Series G Knife Gate Valves can be fitted with a variety of actuators, including 316 SS 200°C 40 cc/min/in
standard handwheel, bevel gear, pneumatic actuators, hydraulic actuators, EPDM 100°C 0 cc/min/in
electric actuators and chainwheel actuators. Other options include limit
switches, solenoid valves and bonnets.
E
Materials of Construction
Body: Cast iron, lined with 316 stainless steel
Seat: 316 ( metal) or EPDM (resilient)
Actuators: Manual, pneumatic, hydraulic and electric actuators available
ANSI class 150
H1
Height Height Handwheel H
Valve F to F A B Pmax M
DN Closed Open Diameter
Size [mm] [mm] [mm] [bar] [kg]
H [mm] H1 [mm] E [mm]
50 2” 48 165 83 279 330 203 10 10
65 2 1/2” 48 165 95 305 356 203 10 11 B
Electrically actuated knife gate valves are actuated by AUMA electric operators
as a standard. These operators can be supplied with either 220-volt or 440-volt
three-phase service and have a NEMA 4 rating. Standard features include Class F
insulation, a double-lead ACME stem thread, bronze drive nut, declutchable
handwheel override, opening and closing torque and stroke limit switches, 100
three pushbutton station with selector switch and position indicator. Other
80
electric operators, ratings and services are available. A modulation version is Flow Rate %
available that accepts the standard ISA 4-20mA input signal. When ordering 60
electrically actuated knife gates, please specify electrical service and pressure
drop across the valve. 40
20
Materials of Construction
Body: Cast iron body, Lined with 316 SS 0
Seat: 316 (metal) or EPDM (resilient) seat Flow Characteristics 20 40 60 80 100
Actuators: Pneumatic or electric Full-port Series G Percentage of Opening
ANSI class 150
Series G Pneumatic and Electric Actuator Sizing Chart Based on 4.1 bar Actuator Air Pressure
Line Pressure 0-1.7 bar 1.8-3.4 bar 3.5-5.1 bar 5.2-6.8 bar 6.9-10 bar
Valve
DN Pneumatic Electric Pneumatic Electric Pneumatic Electric Pneumatic Electric Pneumatic Electric
Size
50 2” RD-4 SA 07.1 RD-4 SA 07.1 RD-4 SA 07.1 RD-4 SA 07.1 RD-4 SA 07.1
80 3” RD-4 SA 07.1 RD-4 SA 07.1 RD-4 SA 07.1 RD-4 SA 07.1 RD-4 SA 07.1
100 4” RD-4 SA 07.1 RD-4 SA 07.1 RD-4 SA 07.1 RD-4 SA 07.1 RD-4 SA 07.1
150 6” RD-4 SA 07.1 RD-4 SA 07.1 RD-6 SA 07.1 RD-6 SA 07.1 RD-6 SA 07.5
200 8” RD-6 SA 07.5 RD-6 SA 07.5 RD-6 SA 07.5 RD-6 SA 07.5 RD-8 SA 07.5
250 10” RD-8 SA 07.5 RD-8 SA 07.5 RD-8 SA 07.5 RD-8 SA 07.5 RD-8 SA 07.5
300 12” RD-8 SA 07.5 RD-8 SA 07.5 RD-8 SA 10.1 RD-8 SA 10.1 RD-10 SA 10.1
350 14” RD-8 SA 10.1 RD-8 SA 10.1 RD-10 SA 10.1 RD-10 SA 10.1 RD-12 SA 14.1
400 16” RD-10 SA 10.1 RD-10 SA 10.1 RD-12 SA 14.1 RD-12 SA 14.1 RD-12 SA 14.1
450 18” RD-10 SA 14.1 RD-10 SA 14.1 RD-12 SA 14.1 RD-12 SA 14.1 RD-14 SA 14.1
500 20” RD-12 SA 14.1 RD-12 SA 14.1 RD-14 SA 14.5 RD-14 SA 14.5 RD-16 SA 14.5
600 24” RD-14 SA 14.5 RD-14 SA 14.5 RD-16 SA 14.5 RD-16 SA 14.5 RD-20 SA 16.1