Beruflich Dokumente
Kultur Dokumente
Setup Guide
http://www.elastix.org
PaloSanto Solutions
2N Helios IP Server Setup Guide
Figure 1-1 is a setup diagram for a single intercom 2N Helios IP configuration. The
intercom is setup as a SIP telephony device.
Figure 1-1. Setup Diagram
Hardware Type
Hardware Version
Software Type
Software Version
Description
Elastix Appliance ELX-Series
ELX-3000
Elastix
2.3
PaloSanto Solutions
2N Helios IP Server Setup Guide
PaloSanto Solutions
2N Helios IP Server Setup Guide
5. Click on the Submit button to add an extension, see Figure 4-3. This will take you to
the Add SIP Extension page.
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
User Extension (301 in this example)
Display Name (2NHeliosIP in this example)
secret (h7Dka3Rf9si0t in this example)
Figure 4-4. Add SIP Extension
PaloSanto Solutions
2N Helios IP Server Setup Guide
7. Click on the Submit button at the end of the page. The extension will be created and
you will see the page on Figure 4-5 displaying the Apply Configuration Changes Here
pink ribbon on top of the screen.
8. Click in the Apply Configuration Changes Here link
Figure 4-5. Apply Configuration Changes Here
9. With this you have just finished creating a SIP extension that will be used by the 2N
Helios IP to register with the Elastix Server. Repeat Steps 5 through 8 to similarly
create another extension (different values on Step 6) to be used by the IP (SIP) Phone to
register as well, well use extension 302for it in this example. Once finished you will
see something similar to Figure 4-6
Figure 4-6. 2N Helios IP and IP Phone extensions successfully created
10. To register the 2N Helios IP, you will need to enter the information from the
extension created on the Elastix Server (Step 6) into the Helios IP by logging into the
2N Helios IP WebUI.
Log in to the 2N Helios IP WebUI by pointing your browser to the 2N Helioss IP
address.
For the initial configuration, refer to the 2N Helios IP User Manual which can be found
at: http://www.2n.cz/download/2/3/8/4/2n-helios-ip-user-manual-pb1510-v1.11.1.18.pdf
You can figure out the IP address by running any network scanner or packet capture
software.
Factory default settings
Web Access User Name Admin
Web Access Password
2n
PaloSanto Solutions
2N Helios IP Server Setup Guide
11. When prompted, enter the Web Access Username and Web Access Password to
access the WebUI (Figure 4-7).
12. Use the information from the Add SIP Extension page (Step 6) to enter the
following necessary information on Advance Setting => SIP Settings section of the
2N Helios IP WebUI (Figure 4.8):
User Settings
Display Name(2NHeliosIP in this example)
User ID(301 in this example)
Domain(Elastix Servers IP Address, 192.168.5.186 in this example)
Use Auth ID: Yes
Auth ID(301 in this example)
Password (h7Dka3Rf9si0t in this example)
SIP Proxy Settings
Proxy Address(192.168.5.186 in this example)
Port: 5060
SIP Registration
Register Helios IP: Yes
PaloSanto Solutions
2N Helios IP Server Setup Guide
13. Once you have entered the required information, click on Submit button located at
the end of the page on the right. To apply changes reboot the intercom by going to
Tools => Reboot device. If the intercom is not able to register after rebooting, make
sure youve entered the correct information. Confirm the registration in Information
section (Figure 4-9).
Figure 4-9. Information section
14. Once it is registered, we have to assign a number extension to the first quick dialing
button on the 2N Helios IP. To do this go to Basic Settings => Phone Book and fill in
the following information:
PaloSanto Solutions
2N Helios IP Server Setup Guide
General Settings
Phone Numbers