Beruflich Dokumente
Kultur Dokumente
106
(05/25/2011)
Added:
"Reading the data file ahead" procedure in order to be able
to read both older and newer formats, as well as withsta
nd
at least the most typical file corruption scenarios
Started working on the CSM option
Accelerated file loading algorithm
Changed:
Allowed using Z (carriage position) channel to the list of
scratch depth-measuring channels
Fixed:
Reversed X axis in the result (Strybeck) curve vs.
negatively-defined Fz (#2140)
Error bars display in the result (Strybeck) graph
Using the trend option concurrently with Compare graph (#2148)
2.19.105
(04/05/2011)
Added:
"Absolute Value" data calculation mode
Support for up to 32 user-defined channels
Peak-to-Peak display mode for compressed data
Option to stop loading a data file on file structure error
Step Start Time stamp to the exported data format
"Oscillating COF" button on the Tools toolbar
Applying the oscillating mode to Tz-based COF in addition to Ffbased
Two more modes to "Shift Data" processing mode
Screen resolution selection
Exporting corrosion data processing results to Excel spreadsheet
/csv file
Multi-scan graph option in the "Tafel Plot", "Tensile", and "Fle
xural"
tests mode
Step Start Time stamp to the exported data format
Save As option allowing to export the results of the corrosion
data processing to a .csv file or/and to a xls/xlsx file
if available
Changed:
Extended the exported text file format to accomodate for the
longer channel names
Extended the "Oscillating COF" mode to Tz-based COF
Enhanced the temperature drift calculation (indentation data)
to allow automatic recalculation upon marker removal or
replacement (including marker dragging)
Reorganized the Export ("Convert data file to ASCII) dialog
Simplified the frame stiffness calibration algorithm
Changed samples-based oscillating test parameter to time-based o
ne
Made data compression independent for each open file
Rearranged Tools toolbar buttons
Made sure that the individual graphs for hidden cycles are not d
isplayed
Speeded up the file loading
Fixed:
Exporting the results of indentation data processing to
an Excel file
The last loading cycle removal
Graphs printing
Logaritmic axis scaling in the result graph
False error message on vertical marker setting
Wrongful frame stiffness recalculation upon repetitive "Calculat
e"
button pressing
Macro-indentation loading steps recognition when force control-b
ased
indentation was performed
Did not open a data file if its name extension was specified in
the upper case
Sporadical non-responsive user scaling for the data graphs
(Added means to restore this functionality by clicking
on a data channel name in the channels list)
Indentation touch point detection accuracy
"Peaks" option
Frame stiffness calibration display error on the repetitive
calculation attempts
F01:
Non-working base-subtracting option
Crash on the Oscillating COF option
Inconsistent compression option (did not work properly when a
"peak-to-peak" mode was selected while all of the sub-mo
des
(average/min/max) were unselected
Initial state of the oscillating parameters dialog
2.18.104
(10/04/2010)
Added:
Support for up to 32 custom data channels
2.17.103
(intermediate)
Added:
"Tafel Plot" corrosion data processing option
Corrosion Rate Calculator
Optional parameters to the imported textified file
Implemented saving the stress/strain data in the
Flexural mode to a text/csv file
Changed:
Horizontal marker style to reflect what channel it is related to
The "Textify"-contained wording with the "Export"-contained one
Fixed:
Bugs (#2122, #2124)
Converting the graph background to black after graph printing
2.16.102
(06/29/2010)
Added:
Option to append the "between-the-steps" data to the correspondi
ng
previous data steps
Option to take into account or to exclude the time between the
saved steps in the "open a file as a single step" mode
Changed:
If an indentation cycle depth is out of tip calibration range,
it does not now affect using this calibration for other
cycles
The "Hide" indentation cycle option's scope in order to avoid
the data processing rather than only data displaying
Fixed:
Trend legend creation
Saving graphs to bmp files
Initial Tensile graph display
Elastomers Graph display
Increased 3-point bending data filtering window width in order t
o
reduce sensitivity to data artefacts and make the result
s more robust
Manual indentation data fitting procedure
Result graph steps selection/decelection
Exporting the indentation results to a csv file if the tip is co
nical
2.16.101
(04/13/2010)
Added:
Scratch depth measurement option
Most recently used (MRU) Locations option in the Open File Dialo
g
ASTM D790-07 ("Test Methods for Flexural Properties of Unreinfor
ced
and Reinforsed Plastics and Electrical Insulating Materi
als"
support
Optical images display option
Optimized dialog layouts
"Multiply Data by a Constant" data processing option
Right indentation graph zooming option
Visual Studio 2008 compliance
Grid option (main graph/compare graph/indentation graphs)
Data units selection option
Actual channels names to the color selection options list
"Two adjacent loading cycles" graph type
Vickers/Knoop hardness calculator
Saving graph image to a bmp file for FFT and Result graphs
"Double Accuracy" textification option
(saves data with 6 decimal digits instead of regular 3)
Tooltips to the long dialog items, like filenames
Fixed:
Reading vertical markers from a data file
CETR-only SPM head calibration utility
Trend calculation persistence
Long data units handling (like "rev/sec")
Changing the X axis in the Compare Graph
Colors setting in the Compare View
Indentation data fitting (implemented additional fitting
attempts with different guess values if the first attemp
t failed)
as well as "manual" fitting procedure to ensure the opti
mal result
Saving the indetation results into Excel spreadsheet
Torque-based coefficient of friction was made units-independent
Indentation fitted line drawing
Changed:
Cleaned up the program main menu
Optimized indentation data processing
Moved graph type and graph options selections to the graphs menu
s
Removed repetitive warnings about indentation cycles-related
2.15.92
(03/21/2007)
Added/Changed:
Indentation data processing and presentation
2.15.91
Added:
Added the Trend option
Improved the Result graph so that any parameter can be used
as an independent variable
Added Log(Hardness) vs. Log(Strain) graph to the
ARCI-related graphs set
Added "points"-based nanoindentation graphs option
in addition to the "line"-based
2.15.90
(11/17/2006)
Fixed:
X data compression
Calculations file and graphs for indentation
Very old data files loading
Macroindentation-related problems
2.15.88
(08/31/2005)
Added:
Options-Indentation-Load Time Calculations
Calculated file of data while loading with time interval
from options
Added graph for Hardness, Stress, Flow Stress Indentatio
n Work etc
Results button on Indentation screen
2.15.87
(08/30/2006)
Fixed:
"Oscillating" COF calculation with approximation
Data on-screen compression
2.15.86
(08/25/2006)
Added:
Calculation NanoData for ARCI
COF calculation for oscillating tests
Selection for choosing whether to display or not
warning messages on data file loading
Fixed:
Icons sizing in the Hertzian calculations-related
dialogs
Data exporting to Hysitron text format (prohibited
"Open in a single step" option)
Data compression and peaks calculations
2.15.85
(07/31/2006)
Fixed:
Units the thermal drift is displayed in: are now always nm/sec
Axes naming and positions in the nanoindentation graphs
Marks in the nanoindentation results (hardness/Elastic
Modulus) graph
Reread option
Saving data after filtering
2.15.84
(07/10/2006)
Fixed:
Horizontal marker for "R" channel
Crash when horizontal marker set in Compare window
Changed:
Sorted file names in Compare window list
2.15.83
Added:
Tip area function display in the tip calibration mode
Changed:
Made frame calibration iterations "visible"
The algorithm for automatic tip area function
coefficients' selection based on the actual
contact depth and available calibration depth ranges
The algorithm of indentation cycles lookup to understand
the steps, which are formally of "Linear Force by Time"
type while in fact have constant force
Fixed:
Axis scaling error on the Result window opening
Tip calibration manual selection bug
2.15.82
(04/14/2006)
Added:
Tip area function calibration
Frame stiffness calibration
Nanoindentation results saving in xls, csv, and txt formats
Automatic touch points lookup
Normalized graph for loading cycles
Step-based temperature drift
Early drift compensation
Vertical markers' dragging
Vertical markers' line style
Optional (password-protected) theoretical unloading
curve for fused quartz
Changed:
Indentation data handling
2.15.80
(02/24/2006)
Added:
Nanohead force calibration option (password-protected)
Fixed:
"Open all files in the same window" option
Temperature drift calculation
Nanindentation results presentation
2.15.79
(12/20/2005)
for UMT from ver 1.107.X and for CP4 from ver 4.9.X
Fixed:
Wrong sign of temperature drift correction in nanoindentation ca
lculations
Changed:
Tip calibration file is looked for in the calibration folder fir
st, then in indentor folder
Added:
1024 bytes to the tst file header
Uses nTipID from tst file if exist
Vertical markers use in temperature drift calculatons
////////////////////////////////////////////////////////////////////////////////
//////
2.14.78
Added:
Options-Nanoindentations-Nanoindentor shape,material and radius
Used for nanoindentation calculation when NanoindentoID
== 0
Data from nanonindentor file not used in that case
Fixed:
Reread Test
2.14.77
Fixed:
Cursor jump to left in Yscale edit box in Compare graph window a
fter entering number
Selecting of file doesn't work in Compare graph window
2.14.76
Fixed: Wrong X scrolling position after right boundary touched
////////////////////////////////////////////////////////////////////////////////
//////
for UMT from ver 1.103.203
2.14.75
Fixed: File data format for calculated channels
2.13.74
Added:
Window - Fit Window command in NanoIndentation Window
Changed:
Do not adjust Y-axis limits to round value when autoscale Y-axis
is not checked
Fixed:
Crash in Compare mode
2.13.72
05/24/05
Added: Saving the graphs to bmp files
Fixed: Opening files in the same window option
2.13.71
Fixed: Crash when the X axes range became 0 (during its setting)
2.13.70
Fixed: Time-related bug for the "Read as a single step" mode
2.13.69
Added: "Save As" option to save a current state of a data file
Hertzian contact calculator
"Tools" menu option
Fixed:
Crash which occured when the last displayed data channel
was unselected while
a horizontal tag was on the screen
2.13.68
Fixed: Selecting an unchecked channel in the channel list
About box
////////////////////////////////////////////////////////////////////////////////
//////
for UMT from ver 1.81.145
2.13.67
Fixed: File data format for calculated channels
Average/Std calculations between vertical markers
The "Open all data in one sheet" mode
The "Open all files in the same window" mode
The "Save Screen as a Text File" mode called from a Result graph
The data plotting vs. non-changing parameter
FFT graph
User defined Min and Max on X axises
Options
AutoFFT checkbox
If checked - FFT calculation is automatic after
any change of parameters
If not - press Recalculate button to build graph
2.10.49
Added:
Textify
Options to textify part of file
Check Textify Part File, enter beginnig and end
time in seconds.
Enter 0 to end time to textify till end of file
FFT graph
Click FFT button on toolbar to build Fast fourie transfo
rm graph based based
on current graph selected on screen
////////////////////////////////////////////////////////////////////////////////
//////
for UMT from ver 1.66.114
2.10.48
Added:
filename and time of day is written when textifying
Save As Text File button
Save data from current screen in file;
Fixed:
Compare graph
Some color changing problems
2.10.46
Added:
Textify
Print COF, Ff, COT columns
Compare Graph Window
Show color of plots in tree control
////////////////////////////////////////////////////////////////////////////////
//////
for UMT from ver 1.60
2.10.45
Changed:
Can read and textify new files with 0.0001 time resolution
////////////////////////////////////////////////////////////////////////////////
//////
for UMT from ver 1.59
2.9.43
Changed:
Can read and textify new files with 0.001 time resolution
2.8.42
Added:
Able to change color of single grapf on CompareGraph screen.
Click right mouse button and select color for graph of t
est which menu
is called and parameter selected in parameters listbox.
2.8.41
Added:
File-Open-Open Files in one window. Opens files concactenating d
ata in each test.
2.8.40
Fixed:
Can't set horizontal marker for some parameters combinations
2.8.39
Changed:
Default options(when first installon computer) not to show legen
d
first Y axis has color from options(not color of X axis as befor
e)
MSE to RMS on first screen
Chanege name of channels
Z1 -> Z
Z2 -> Greek letter Theta
Z3 -> X
COF-Ff -> COF
Added:
Value of horisontal marker for each param can be seen on ToolTip
window
(Move mouse over param ListBox)
2.8.37
Added:
Overlap (plot together) several data files. Open several datafil
es and press
"Compare" button on Toolbar. Then you can select/deselec
t test to graph,
scrool it, change X, Y Scale, Select/deselect different
parameters,
Change X axis, Compress graphs etc. After you open or cl
ose datafiles
press "Compare" button again
Graph all parameters versus all parameters(like Fx, Fz etc) grap
hs
On each second vertical markers "del" printed(means delta betwee
n second and first markers)
Changed:
.
COF-Ff instead CO in Legend.
Fixed:
Crash when Min and Max on Y Scale are the same.
Crash when deselect last test in file on result screen
Velocity doesn't updated after test is changed on first screen
Print button on ToolBar
////////////////////////////////////////////////////////////////////////////////
//////
for UMT from ver 1.55
2.8.35
Changed:
Able to set up to 6 vertical markers and save their position in
data file
////////////////////////////////////////////////////////////////////////////////
//////
for UMT from ver 1.54
2.7.34
Changed:
Increase size of notes saved in tst file to 300 bytes
2.6.33
Fixed:
Wrong scrolling by dragging scroll box if duration of test more
then 32000 sec
Crash on result screen treecontrol when right click on test(not
file)
2.6.32
Fixed:
Reread test
////////////////////////////////////////////////////////////////////////////////
//////
for UMT from ver 1.52
2.6.31
Added:
Read Notes (written by UMT 1.52)
File version on Statusbar
2.5.29
Added
Options - Don't show legend on Graph screen
Options-Compress By(Average, Min< Max) -while averaging
show average, max, min point in
group
2.5.28
Added
Show version of UMT which created data file on graph window
Fixed
Backward compartibility to file written UMT ver 1.44
////////////////////////////////////////////////////////////////////////////////
////
for umt from 1.46
2.5.27
Changed:
(Read to the end of the file if header not updated)
If present Slider position in file, calculate COFF/Tz using
(elsewhere radius from header used)
Added:
Different markers and colors for summary graphs
to change color or marker right click on file name in tr
ee control
for background and axises colors - View - Options
Summary graph background from options
2.4.24
Fixed:
Crash on Result graph when data file without Fx and Fy
Error message #Data# if user stop test (data file should be writ
ten
by UMT ver >= 1.44.28)
2.4.23
Fixed:
Reread test while running UMT by button
////////////////////////////////////////////////////////////////////////////////
////
2.4.22
Added:
Textify to file with user defined number points
View/Options/AxisFontSize
Can read UMT ver 1.44. *.tst files(Z4 - second spindle Channel a
dded)
About box - link to web site
Changed:
Reverse X axis on Result graph versus Fz
Fixed:
Hotkeys
Cancel button on WR dialog box
2.3.21
Added:
View/Options/AxisFontSize
2.3.19
Fixed:
Recalculate after marker when Xaxis not time
2.3.18
Added:
Horisontal marker
to set - Right click in Y axis and out of Y axis area
to remove - click outside X and Y axises area or click i
n parameter checklistbox
to see area above marker - point cursor onto graph line
in parameter checklistbox
Fixed:
Crash when open files from different directories with same name
2.3.16
Added:
Second screen show summary graphs from all open files
Can Select and Deselect files
Xscale defined by user
XAxis and background colors can be changed
Changed
CheckListBox for selecting parameters
Can Select\Deselect points on second screen
Fixed:
I1-I3 Color
2.3.11
Fixed:
Duration of test show "d" for days
2.3.10
Fixed:
Y scale defined by user
////////////////////////////////////////////////////////////////////////////////
////
2.3.8
Added:
Can read UMT ver 1.42. *.tst files
Draw legend for multiple channels with averages
Move of legend by left mouse button
Fixed:
5 marks on X axis
Invert graps white to black while printing
Result screen calculate data only to first test after opening fi
le
Changed:
Separate Y scale for each of multiple graps in order to fill scr
een
////////////////////////////////////////////////////////////////////////////////
////
2.2.7
Changed:
(Read files form UMT ver.1.40.12(Change format of time of test)
////////////////////////////////////////////////////////////////////////////////
////
2.1.6
Changed:
Can read new tst file format(from UMT v1.38)
Added:
View-Colors Color setup dialog