Beruflich Dokumente
Kultur Dokumente
United Kingdom
Telephone:0845 250 0586
www.augustint.com
User Manual
Thank you for buying our August TV. You may already be familiar with using
a similar product but please take time to read these instructions carefully. It is
designed to familiarise you with the products many features and to ensure
that you get the very best from your purchase.
Safety
To ensure your safety and the safety of others, please ensure you read the
Safety Instructions before you use this product.
Disposal
Please ensure the product and its accessories are disposed in compliance with
WEEE (Waste Electrical and Electronic Equipment) Directive and other
regulations. Please check with your local authority for disposal regulations.
Customer Service:
If you need help, please contact our Customer Service:
Telephone:
+44 (0) 0845 250 0586
Email:
service@augustint.com
1. It is suggested that you use a roof top aerial when scanning for TV channels
for the first time, if any signal is detected, the channel information will be
saved on the TV, you may then switch back to the portable antenna supplied
and change your location to find the best place to receive the signal.
2. Connect the device to the mains power, press POWER on the remote to
turn on the device, or press and hold POWER on the device for 1.5 seconds
to turn it on.
3. The MODE on the device or remote allows you to switch between: DTV
(Digital Freeview TV & Media Player), ATV (Analogue TV), AV IN,
BRIGHTNESS, CONTRAST, COLOR, HUE, SCALE (Aspect Ratio) and
INVERT.
4. When turning on the device for the first time, Initial Install will show,
follow the instructions to select OSD Language and Area, then press
ENTER, it will ask whether to install, select YES, the auto search will then
start. Once the search has finished, press CH+, CH- or EPG to select
channels. Press TV/R to switch between Freeview TV and Radio channels.
5. If you have done the first time installation before, and would like to search
for Digital Freeview channels again, or if you have moved to a different
region and need to scan channels again, press MODE to switch to Digital
TV & Media Player mode, press MENU, select Digital TV by pressing
ENTER, select Installation, then select Auto Search, press ENTER to
start the search. Once the search has finished, press CH+, CH- or EPG to
select channels. Press TV/R to switch between Freeview TV and Radio
channels.
6. To search for Analogue TV, press MODE repeatedly until it shows ATV,
press LEFT or RIGHT to switch to the Analogue TV mode. Press MENU, it
shows the ATV SETUP menu, set the TV FORMAT to PAL I for UK,
then move to AUTO SEARCH, press ENTER to start the search.
1. Safety Instructions
2. Accessories
4. Connection
5. Basic Operation
12
13
7. Digital TV Recording
19
20
9. Games
22
23
24
12. Specifications
26
13. Troubleshooting
27
14. Warranty
28
1. Safety Instructions
Storage and Use
Keep this
machine away
from hot or
cold places.
Working
temperature of
this device is
0C ~ 50C,
storage
temperature is
-10C ~ 60C.
Keep the TV
set away from
water or damp
environment.
Never expose
the TV set to
moisture,dust
oil or smoke.
Avoid
dropping or
exposing to
impacts.
Never extrude
or chafe this
machine with
sharp objects.
1.Use only the supplied power adaptor with this device. Failure to do so can
cause damage to the device and risk personal injury.
2.For the sake of safety, when you do not intend to use the display, please
switch off the AC adaptor or car adaptor.
For the sake of safety for yourself and others, please do not watch the TV
while driving.
A few highlights or dark spots may appear on the LCD screen. It is a very
common phenomenon of active matrix display technology, and does
Maintenance
Please unplug all connection wires before start cleaning this machine.
Please wipe the
display screen
and buttons with
a softcloth. Only
clean the screen
with professional
LCDTVscreen
cleanser.
-1-
Alcohol
Neverwipethis
machinewithan
abrasivecloth,
detergent
powder,alcohol
andbenzeneetc.
various
propellantsor
chemical
cleaningproducts.
-2-
2 . Accessories
AC/DC adaptor
Remote control
2
1. IR receiver window
Stand
2. LCD display
Digital TV antenna
3.2 Back
1
1
2
3
4
Telescopic antenna
AV cable
5
6
7
8
10
Earphones
User manual
1. Speakers
3. USB jack
5. Earphone jack
7. Standby power indicator
9. Battery compartment
*Note:
The standby power indicator shows red when the device is connected to an
external power source by either the mains or car adaptor and the device is in
standby status. The indicator turns off when the device is switched on.
-3-
-4-
3.3 Top
1.
2. MENU
3.
4.
5.
6.
7.
8. VOL9. VOL+
10. MODE
10
6
REC
8
10
11
12
13
14
15
16
17
18
22
23
MOVE
19
20
21
24
26
25
DA100C
27
-5-
28
-6-
1.
Power on/off the device
2.
Mode switch
3.
Freeview TV and Radio switch
4.
Select audio channel or audio language
5. 0-9 Numbers
6. REC Start recording or stop recording
7.
Main Menu
8.
Next track or chapter
9.
Up / Channel Up
10.
Previous track or chapter
11.
Left / confirm or change settings in ATV mode
12.
Right / confirm or change settings in ATV mode
13.
Confirm settings
14.
Reverse in media player mode
15.
Forward in media player mode
16.
Down / Channel Down
17.
Volume Up
18.
Volume Down
19.
Play / Pause / Resume
20.
Switch off / on the sound
21. MOVE Move channels when using Channel Organizer
22.
Set favourite channels when using Channel Organizer
Shortcut for favourite channels list when watching TV or
listening to the radio
23.
Zoom in on the picture
24.
Set parental lock when using Channel Organizer
25.
Switch on / off subtitle
26.
7 day electronic program guide
Press RIGHT and UP/DOWN to view today's program information.
Press
to view next days program information, press
to come back.
27.
Freeview channel information
28.
Freeview interactive teletext
Operating range
<5m
30 30
If the remote control does not function or if the operating range becomes
reduced, replace the old battery with a new one.
Lithium battery(CR2025)
+
Remove the old battery, then insert the new battery into the battery holder
with the + side facing upwards.
-7-
-8-
*Note:
1.Please ensure proper disposal of used batteries.
2.To prevent leakage of fluid from the lithium battery, remove the battery when
not using the remote control for a long period of time. If the battery leaks fluid,
carefully wipe it out of the battery case, then change to a new lithium battery.
Audio/Video output
4.Connection
Black
Black
AV cable (Included)
Yellow Red
2
White
Signal flow
Earphones
*Note:
If earphones are used, sound is only transmitted through the earphones, and
no sound is available from the stereo speakers of the device.
*Note:
The AV output function is only available in Freeview (DVB-T) and Media player mode.
-9-
-10-
Black
AV cable (Included)
Signal flow
5. Basic Operation
5.1 Turning on/off the device
5.1.1 Turn power on
Connect the device to the mains power, press POWER on the remote to turn on
the device, or press and hold POWER on the device for 1.5 seconds to turn it on.
5.1.2 Turn power off
Press POWER on the remote to turn off the device, or press and hold POWER on
the device for 1.5 seconds to turn it off.
5.2 Mode settings
Press MODE repeatedly to select between the following modes:
DTV: Freeview TV & Media Player, press RIGHT to change
ATV: Analogue TV, press RIGHT to change
AV IN: AV input, press RIGHT to change
BRIGHTNESS: Press LEFT or RIGHT to change
CONTRAST: Press LEFT or RIGHT to change
COLOR: Press LEFT or RIGHT to change
HUE: Press LEFT or RIGHT to change
SCALE: Press LEFT or RIGHT to change aspect ratio to 16:9 or 4:3
INVERT: Press LEFT or RIGHT to change the display to upside down or normal
-11-
-12-
-13-
-14-
the numbers.
PCR PID: can be changed by pressing
the numbers.
Once finish the settings, press ENTER
to confirm, it will show Successfully
updated and return to Edit Channels.
During setup, press MENU at any time
to cancel and exit to Edit Channels.
6.2 Installation
Installation is for searching TV and Radio
channels, it can be accessed by selecting
MENU-> Digital TV-> Installation.
6.3 Configuration
Configuration menu has the following
options: On Screen Display, TV, System
Setup, Time, Wakeup Timer and Parental
Lock. It can be accessed by selecting
MENU->Digital TV->Configuration.
-15-
-16-
-17-
-18-
7. Digital TV Recording
6.6 Version
This provides the hardware, software and
system information.
-19-
-20-
8.1 Movie
Press MENU, select Movie, press ENTER,
the Movie menu will show:
8.2 Music
8.3 Photo
Press MENU, select Photo, press ENTER,
the Photo menu will show:
Press
to search forward at 2, 4, 8 and
20 times of the normal speed.
Press
to reverse at 2, 4, 8 and 20 times
of the normal speed.
Press
to play the previous movie,
press
for the next one.
Press ZOOM, a magnifying glass will show
on the screen, press
to zoom out and
view the picture at 1/2, 1/3, or 1/4 times of
the normal view. Press
to zoom in
and view the picture at 2, 3, or 4 times of the
normal view, press LEFT or RIGHT to move
the picture.
Press MENU to stop at any time, press again
to exit the playback.
Press
to search forward at 2, 4, 8 or
20 times of the normal speed.
Press
to reverse at 2, 4, 8 or 20 times
of the normal speed.
Press
to play the previous music file,
press
for the next one.
Press MENU to stop at any time, press again
to exit the playback.
-21-
9. Games
Games can be accessed by selecting Menu
->Game-> Native Games.
-22-
Use UP/DOWN to select SKIP ON, press ENTER to confirm, then press
MENU to exit.
To turn the SKIP OFF for a channel, press the channel's number, press MENU,
use UP/DOWN to select SKIP OFF, press ENTER to confirm, then press
MENU to exit.
10.1 TV FORMAT
Use UP/DOWN to select the correct TV format for where you are, press
ENTER to confirm.
*Note
Set the TV FORMAT to PAL I for UK.
*Note:
If the signal is too weak, the image will remain poor whatever you do, and may
output loud noise, shaking images and inferior sound etc., which is not the TV's
fault. If the image remains poor when using the telescopic antenna, please try to
use a roof top aerial or an amplified external antenna.
This device has got a built-in battery compartment which takes 6 pieces of AA 1.2V
rechargeable batteries.
or
Fully charged batteries with 2700mAh capacity can support the TV watching
and video playback for up to 2.5 hours. Higher duty batteries work longer.
-23-
-24-
12. Specifications
LCD Display
Decode Standard
6, 7, 8 MHz
DVB-T Frequency
Analogue TV Format
Analogue TV Frequency
AV In
AV Out
Antenna Input
Impedance: 75ohm
Card Reader
USB Port
Built-in Speaker
2 x1W, 8 ohm
Make sure the device is switched off and disconnected with the power lead.
Power Adaptor
Battery Compartment
AC 100~240V 50~60 Hz
DC 12V/1.5A
Watch TV for up to 2.5 hours with 6 x AA
1.2V 2700mAh rechargeable batteries.
Power consumption
< 10 W
Dimensions
263x172x31mm
Net Weight
681g
push down
Media Formats
2) Place the batteries with + and - poles in right direction as shown on the
device.
3) Replace the battery cover, slide and push it back.
-25-
Video player
File Type
AVI,MPG,ASF,VOB
Video Type
Audio Type
32Kbps ~ 320Kbps
Resolution
Frame Rate
Max. 30fps/25fps(PAL)
-26-
Music player
Photo viewer
Caption
File Type
MP3,WMA
Bit Ratio
32Kbps~320Kbps
File Type
Resolution
13. Troubleshooting
Warranty
Problems listed below do not necessarily signify a fault with the unit.
Please check this list before requesting repairs.
Problems
No picture and no sound
No image
No sound
No signal
Dark Picture
Snowstorm
Achromatic/Flashing/No Colour
No user serviceable components are fitted inside this TV. Do not attempt
any repairs, as this will invalidate the warranty. Any repairs must be carried
out by either the manufacturer or their nominated service centre. Parts
inside this set are subject to high voltage.
This product is guaranteed for twelve months from the date of the original purchase. In the
unlikely event of any defect arising due to faulty materials or workmanship, the unit will
be either replaced or repaired free of charge (where possible) during this period. An
alternative product will be offered in case the product is no longer available or repairable.
This warranty is subject to the following conditions:
The warranty is only valid within the country where the product is purchased
The product must be correctly installed and operated in accordance with the
instructions given in the user's manual.
The product must be used solely for domestic purposes.
The warranty only covers the main unit, and does not cover the accessories.
The warranty does not cover the damage caused by misuse, negligence, accident
and natural disaster.
The warranty will be rendered invalid if the product is resold or has been damaged
by inexpert repairs. The manufacture disclaims any liability for incidental or
consequential damages.
Please consult our customer service before returning any product; we are not
responsible for any unexpected product returns.
Any faulty products must be kept and returned in the original packaging with all the
accessories and the original copy of the purchase receipt.
The warranty is in addition to, and does not diminish, your statutory or legal rights.
Please note:
1.A LCD display panel comprises a very large number of pixels and each pixel contains
three sub-pixels - red, green and blue. Due to the complex manufacturing process,
occasional pixel anomalies may occur. Pixel anomalies cannot be fixed or repaired and
can happen at any stage in the LCD's life. August products should not be deemed as
faulty if there are no more than three bright and dark pixels respectively.
2.Portable TV antennas included in the box are for people to watch Freeview TV in areas
where the signal is very strong and there may be difficulties in receiving signal with the
included portable antennas in some regions at present. This is due to the fact that
Freeview is yet to operate in full power in the UK. August TVs should not be deemed
as faulty if it can receive Freeview by connecting to a proper digital rooftop aerial.
Customer Service:
Telephone:
+44 (0) 0845 250 0586
Email:
service@augustint.com
-27-
-28-