Beruflich Dokumente
Kultur Dokumente
measurIT technologies
Solution……………………………………………….
Non-invasive ultrasonic flow measurement is a very good and
economic alternative to the magnetic-inductive flowmeters
customarily used in the water and wastewater industry. Because the
clamp-on ultrasonic transducers are simply installed on the outer
surface of the pipe, large diameters do not imply any significant
additional costs. Furthermore installation and commissioning are
very easy, requiring no pipework or large construction work.
The measuring points are at the inlets of the denitrification tanks
(with recycled sludge) and at the recirculation pipes. The high
transmission power of the FLUXUS? ADM ensures reliable and
failure safe measurements even in the case of large diameters,
deposits and/or contamination of the wastewater with solid sludge
Easy installation without pipework or particles. Using dual-channel transmitters makes it possible to set
construction: The clamp-on transducers are
simply attached to the outside of the pipe. up each measuring point for cross-measurements with two pairs of
transducers.
Advantages…………………………………………….
Reliable and safe measurement
A high dynamic measuring range ensures precise measurements
at both low and high flow rates.
Highly precise and stable measurements thanks to the cross-
measurement set-up with two sensor pairs and a dual-channel
transmitter at each measuring point.
Enormous cost advantage as compared with magnetic inductive
flowmeters
Ultrasonic dual-channel FLUXUS? ADM 7207 Easy, cost-efficient installation (no crane and heavy equipment
transmitter reliably monitors the measuring required for assembly)
points.
Not disturbed by deposits