Beruflich Dokumente
Kultur Dokumente
Winches
Drive Technology
Engineering
Assemblies
Components
SYSTEM DRIVES
www.EURONORM.nl
TABLE OF CONTENTS
Page
euronorm manufacturing
Introduction
8/9
10
Check out www.EURONORM.nl for technical data and drawings of our products.
For advice, documentation, quotations and other information: 0575 - 599700.
Our General Conditions of Delivery and Installation apply to all our deliveries.
You can check these out via the website www.euronorm.nl or they can be sent to you.
Furthermore, nothing from this publication may be duplicated or stored in a database
without the prior approval of Euronorm Technodrive.
As the prices of these products are subject to frequent change, we can assume no liability for any damage that may occur as a
result. All changes are therefore reserved.
www.EURONORM.nl
In recent years we have started to concentrate more on the production of the winches on behalf of
the engineering offices, project managers, retail sales staff and hoisting technology specialists.
www.EURONORM.nl
PLANETARY COMPACT
WINCHES
INTRODUCTION:
Hoisting capacity from 600 kg. up to and including 11,000 kg.With planetary gearunit, disc brake and drive with brake
valve fully integrated in drum. Also available according to CE-regulations.
General: Winches exists in various types and dimensions and for different applications. That is
data :
alsoTechnical
the reason
why no standard overview can be given of drawings, dimensions and prices.
Stroke
Cable
Maximum application
Euronorm ensures thatMax.
thereMax.isoila Max.
solution
to every
and hence also for winches. We
press
Lifting force
volume
capacity
cable
lifting
therefore
draw up a customised
with drawings for every project. EURONORM manufacflow Q quotation
p
Type
motor diameter 4th layer
speed
DM-HPC
tures winches on the basis of customers specifications. The winches can be sub-divided into main
1st Layer 4nd Layer
(cm ) electric
(Bar)
(l/min)
(m/min) hauling
(m) hydraulic winches, capstans and winches
(mm) and
groups: Hoisting
winches,
winches,
(kg)
(kg)
for special
applications.
600
800
650
47
30
165
80
7
57
3
1,190
1500
1190
54
50
190
125
59
Cables:
consideration
1,950 When
2500 selecting
1950
30the cable,
50
205
200
12must54be given to the load to be handled and the
purpose.
The
breaking
strength
to
be
selected
is
2,680 3400 2680
60
100
205
315
14heavily
72 dependent on these factors. For a hoisting
application,
for example,
safe working
is 5x 92
the necessary force. For a hauling winch,
3,660 4700
3660
46 the100
220
200load 16
can be
assumed.
It
is
furthermore
dependent
on
the
speed
and the number of layers. In the bot4,410 5700 4410
35
100
205
315
18
103
tom 6,670
layer, 8500
the force
higher315than 22
in the118
top layer. The speed is also often
6670 of the
25 winch
120 is 195
selected
for
the
middle
layer.
10,760 14000 10760
48
250
285
110
24
121
Drum: The drum generally consists of a heavy cylinder with two flanges to contain the cable. It
PLANETARY
COMPACT
WINCHES
frequently
has a groove that
guides the first
layer tidily around the drum. The thickness of the
WITH
SINGLE-SIDE
DRUM
SUPPORT
flanges and drum is calculated on the basis of the
specified hauling force and the materials emHoisting
from
500diameter
kg. up to and
including 7,500bykg.the
Speed
andthickness
power on and
request.
ployed.
Theforces
length
and
is determined
cable
Planetary Hydraulic : type DM-HPV
storage capacity (cable length). These dimensions frequently also determine the necessary speed
Planetary Electric
: type DM-EPV
of the
drive and the torque
at the drum shaft. The best material is naturally always used.
Technical data :
REQ
18
24
60
80
ON
5,000
7,500
ON
5,000
7,500
REQ
UES
UES
Advised cable
Capacityimport and can therefore select from a wide
Hoisting load
The drive:
from its own
Type EURONORM employs drivesSpeed
Power
EP
diameter
full
all layers
rangeDM-HPV/EPV
for designing
the right winch. The drives candrum
furthermore be designed with various modules
(mtr/min)
(kW)
(kg)
(mm)
(mtr)
and options in order to meet all the customers specific wishes. When the hauling speed and the
500
6
75
500
diameter of the pitch circle on the middle layer is known, the speed can be determined. The
1,000
1,000
8
45
necessary force, the output and operating factors determine the gearbox size. When the selection
2,000
2,000
12
45
has been made, the values for the drive are input into the calculation as the starting point. For3,000
3,000
14
40
mulae that are employed here can be found on the following page.
HP
The design: The materials and dimensions of the construction are calculated for the highest load
and the least favourable contact point of the load. An extra safety margin is calculated for operaHAULING
tionPLANETARY
over prolonged periods,
and the weld WINCHES
seams are precisely calculated.
Line pull capacity from 5,000 kg. up to and including 60,000 kg. With claw clutch and spindle band brake.
Main shaft CrMo
two double-row
spherical
roller bearings.
Lubrication:
The with
lubrication
is generally
dependent
on the type of drive employed. For worm
built
with
various
options.
These
winches
are
usually
custom
gearboxes, the demands are slightly lower than for spur gears. Lubrication can sometimes also be
Planetary
Hydraulic
typeatDM-HKB
Planetary Electric
: Information
type DM-EKB on lubrication of
necessary
if the
winches: are
a standstill for prolonged
periods.
data
:
theTechnical
drives and
other
moving parts can be found in the technical manuals for the winches supplied
or via the
website
www.euronorm.nl.
Line pull force
Hold force
Drum
Cable
Type
Speed
DM-HKB/EKB
1st layer
1st layer
diameter
capacity
(kg)
(m/min) on the basis of the customers specifi(mtr) coatings
(mm)
Coating: The winches
are(kg)provided
with special
HKB
5,000
5,000
10 colour RAL 5010 if no other colour is
10,000
16
180
cations or if the application demands. We generally use
10,000For winches
10,000
15,000at sea,20
10 applied depending on the application.
200
specified.
used
various coatings
are
15,000
15,000
20,000
24
10
220
Fields
of application:
Industry,
fisheries,
(Different
and / or greater lifting
capacity on
request.) mining, shipping, theatres, cranes, windmills, magazines and in-house transport, concrete factories, excavator ships, tugs, etc.
EURONORM has documented every winch. The space in this brochure, however, is too limited toEKBbe
able to describe where each winch has been employed and what versions have been supplied.
G TO YOUR SPECIFICATIONS.
THIS
www.EURONORM.nl
Load:
Safety standard:
Reeving:
Rope diameter:
Hoisting winches
Hauling winches
Drum diameter:
Drum speed:
n = V/(3.14 x 2 x radius)
2 safety windings
Operation:
Efficiency:
Output/torque:
P load = (M x n)/9550
Wrap angle:
The angle that the rope forms at the contact point of the load in relation to
the inside of the flange. Measured from the middle of the drum.
This must not exceed 2 degrees. A rope guide may have to be installed.
Diameter of flange: D stc 1 of the first layer + 2 x (number of layers +1) x Drope
Length of rope:
www.EURONORM.nl
Tower drive
www.EURONORM.nl
Linepull of 250 kg. t/m 2,800 kg. Up to 750 kg. without foundation.
For all electromotors: IP56 enclosure, insulationclass F and voltage 400Volt - 50Hz.
Technical data :
Type
DM-RMI
Linepull Linepull
1st layer 3rd layer
250
500
1,000
1,250
1,750
2,250
2,800
Motor
power
(kg)
(kg)
(kg)
(kg)
(mm)
(mtr/min)
(mtr)
(kW S2)
250
500
1,000
1,250
1,750
2,200
2,800
200
400
800
1,000
1,400
1,700
2,200
200
400
800
1,000
1,400
1,800
2,200
160
330
661
826
1,150
1,400
1,750
6
6
8
8
10
12
14
7.5
7.5
5.5
5.5
5.5
6.5
6.5
20
20
40
40
55
65
85
0.55
1.1
1.5
2.2
3
4
5.5
Type
DM-EP / HP
3,000
5,000
6,000
10,000
20,000
Lifting
force
(kg)
3,000
5,000
6,000
10,000
20,000
Cable
diameter
Speed
Power
(m/min)
8
8
8
6
(kW S1)
6
8
11
11
ON REQUEST
(mm)
16
18
22
26
34
HP
Cable capacity
1st layer
full drum
(m)
27
34
28
33
(m)
165
199
170
196
EP
ON REQUEST
2,000
3,000
5,000
6,000
8,000
10,000
10
10
8
8
8
6
(Electr.)
(S2 kW 400V)
200
250
370
370
450
450
4
5.5
7.5
9
12
12
(Hydr.)
p+Q
2,000
3,000
5,000
6,000
8,000
10,000
Power
Neck
diameter
(mm)
UES
Speed
(mtr/min)
REQ
ON
Type
DMK-PH/HP
WE
www.EURONORM.nl
WINCHES
Hoisting capacity from 600 kg. up to and including 11,000 kg.With planetary gearunit, disc brake and drive with brake
valve fully integrated in drum. Also available according to CE-regulations.
Technical data :
Type
DM-HPC
Max.
lifting
Lifting force
speed
1st Layer 4nd Layer
(m/min)
(kg)
(kg)
600
800
650
1,190 1500 1190
1,950 2500 1950
2,680 3400 2680
3,660 4700 3660
4,410 5700 4410
6,670 8500 6670
10,760 14000 10760
(l/min)
(Bar)
(cm3)
(mm)
(m)
30
50
50
100
100
100
120
250
165
190
205
205
220
205
195
285
80
125
200
315
200
315
315
110
7
9
12
14
16
18
22
24
57
59
54
72
92
103
118
121
47
54
30
60
46
35
25
48
Hoisting forces from 500 kg. up to and including 7,500 kg. Speed and power on request.
Planetary Hydraulic : type DM-HPV
Planetary Electric
: type DM-EPV
Technical data :
Speed
Capacity
full drum
Power
(kg)
(mm)
(mtr/min)
(mtr)
(kW)
500
1,000
2,000
3,000
5,000
7,500
6
8
12
14
18
24
REQ
UES
75
45
45
40
60
80
EP
HP
ON
UES
Advised cable
diameter
REQ
500
1,000
2,000
3,000
5,000
7,500
Hoisting load
all layers
ON
Type
DM-HPV/EPV
Line pull capacity from 5,000 kg. up to and including 60,000 kg. With claw clutch and spindle band brake.
Main shaft CrMo with two double-row spherical roller bearings.
These winches are usually custom built with various options.
Planetary Hydraulic : type DM-HKB
Planetary Electric : type DM-EKB
Technical data :
Type
DM-HKB/EKB
5,000
10,000
15,000
Hold force
1st layer
Cable
diameter
Drum
capacity
Speed
(kg)
5,000
10,000
15,000
(kg)
10,000
15,000
20,000
(mm)
16
20
24
(mtr)
180
200
220
(m/min)
10
10
10
HKB
TO YOUR SPECIFICATIONS.
THIS
www.EURONORM.nl
Enquiry form
www.EURONORM.nl
10
SYSTEM DRIVES
Drive Technology: Electric and hydraulic drives, linear drive technology, planetary gears,
electric motors, drum motors, winches, variators, clutches,
pump distributors, vibratory motors, spindles and double helical gears
Engineering: Together with you, we find the best solution for your application.
By selecting the simplest construction and and using standard drives,
you save on the integral cost price without making concessions on quality.
Assemblies: You can subcontract part of the manufacture of your finished product to us
and have it delivered as an assembled product to your production line. Examples of this
are: Special winches, radar drives, underwater motors and IP 68 drives, excavator drives,
agitator drives, barrier drives, special actuators, etc.
The work is carried out on the basis of the protocol that we draw up with you or that already exists.
Components: A broad range of bearings, chains, seals, V-belts, etc. is available from
stock. For the overhaul of drives, winches, pumps, etc., you can call on the Technopoint
after-sales service.
This department operates independently of the product brand - and its goal is to minimise
your production standstill time.
www.EURONORM.nl
SYSTEM DRIVES
sales@euronorm.nl
info@technopointbv.nl
LW 06/08 Euronorm
www.EURONORM.nl