Beruflich Dokumente
Kultur Dokumente
TRADE THEORY
Choose the correct Answers:1. What is the proper device to hold gear or pully or lathe _________________
a) Steady
b) Angle Plate
c) Mandrel
d) Four Jaw chuck
2. What is an angle of deal centre.
a) 90 degree b) 68 degree
c) 30 degree
d) 45 degree
3. What type of thread lead screw of lathe has ________________
a) Square
b) Acme
c) Whit worth
d) Butters
4. What is the second name of centre drill ________________
a) Cutting tool
b) Facing tool
c) continuation drill bit
d) Tool heard
5. Lathe lead is made of ______________
a) H.C. Steel
b) cast iron c) mild steel
d) Nickel
6. What is an angle of angle plate _____________
a) 30 degree
b) 45 degree
c) 60 degree d) 90 degree
7. Which metal is used to make face plate
a) Carbon Steel
b) tool steel
c) wrought iron
d) cast iron
8. Which type of thread is oxygen cylinder regulator has _____________
a) Acme
b) Left hand
c) Double start
d) Right hand
9. What is colour of acetylene gas cylinder
a) Red
b) Black
c) Green
d) Yellow
10. Converting of metal into sheet this property is called ________________
a) plasticity b) Dactility
c) Elasticity
d) Mallebility
11. Gun metal is alloy of ________________
a) copper and zinc
b) Tin and zinc
c) copper, Tin and zinc
d) Lead, Tin and zinc
12.
German selver used for _______________
a) Jewellery b) Chemical instrument
c) coins
d) Utensils
13.
How many types of fasteners are there
a) one
b) two
c) three
d) four
14.
Which fastener is semi permanent
a) weeding
b) Riverting c) nut-bolt
d) forging
15.
Which fastener is semi- permanent
a) weeding b) soldering
c) Brazing d) nut-bolt
16.
Which fastener is weeding
a) temporary
b) semi-permanent c) Permanent
d) None of three
17
Which bolt fit in rectangular slot
a) square bolt b) Hexagonal bolt
c) T- bolt
d) Hook bolt
18.
Which type of bolts is mostly used
a) chese head b) hook bolt
c) hexagonal bolts
d) Eye bolt
19
Which bolts is without head
a) Head less bolts
b) Eye bolt
c) Hook bolt
d) Rag bolt
20.
Which degree head bolt is chamfered
a) 30
b) 45
c) 60
d) 90
21.
Which fastener has threading on both sides__________
a) bolt
b) nut
c) screw
d) stud
22.
23.
24.
25.
26.
27.
28
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
d) 2100 RPM
65.
The hexix angles of a drill very according to the hardness of the material being drilled the
ranges of the hexigagee would be in
a) 16 degrre to 30 degree
b) 35 degree to 40 degree
c) 10 degree to 40 degree
d) 10 degree to 13 degree
66.
In a drill type the difference angles for different purposes they are only types
a) 5 types
b) 4 types
c) 3 types
d) 2 types
The size of Radious and filler gauges measure the concexte and convex surfaces of
a) 0.35 mm to 5 mm b) 0.03 mm to 1.0 mm
c) 0.1 mm to 25 mm
d) 8 mm to 12 mm
The length of the feeler gauge is in a set ___________(each set)
a) 50,100,200 mm
b) 10,20,30 mm
c) 60,100,200mm
d) 100,200,300mm
Zinc powder is coated on m.s. is know as
a) Brittle
b) P.V.C.
c) Softness
d) G.I.
Lead is prepared from are of
a) Baoxite
b) Stiplite
c) Gaeena
d) Zinc Sulphide
A non-ferrous metal which has property of brittleness that is
a) Zinc
b) lead
c) Tin
d) Copper
The body of aeroplane is made of aluminum because to its ________
a) Colour
b) Melting point
c) Point
d) weight
The other name of screw pitch gauge is
a) Pitch gauge b) Depth gauge
c) Thread gauge
d) Slip gauge
The other name of the feeler gauge is known as
a) Gap gauge b) Clearance gauge c) Profile gauge
d) Thickness gauge
The angle of the taper tap is forms due to easily into the drilled hole its angle is
a) 4 degree
b) 10 degree c) 5 degree
d) 20 degree
Find out the tap drill size the apply formula is to be ___________
a) Tapsize = D x 0.8 b) Tap size = D % 8 c) Drill size= T-2d
d) Drill size= T-2dp
The word micrometer 19 inverted in the country of
a) France
b) Germany c) Greek
d) Novay
It is similar to that of screw but it has no head and it has threads on both ends, center
portion is bean as it is called
a) D.E. spanner
b) Nut
c) Bolt
d) None of above
Fiult gauge is used to check the surface of
a) convex
b) Flat
c) Concave d) Halfround
Vernier height gauge is used to check
a) To find the dimension
b) To check the surfaces
c) Centre location
d) To devide the lines accurately
The angle of B.A thread is
a) 45 degree b) 29 degree c) 471/2 degree
d) 60 degree
Last count of v. micrometer is to be read
a) 0.02 mm b) 0.01 mm c) 0.1 mm
d) 0.001 mm
Taps are cut only thread of
a) External
b) Only one end
c) Both external and internal d) Internal
Tapers are used for
a) To find out the included angles
b) Increase the and decrease the diameter
c) Taps are only length of cylinder d) Easy assemble and dismental
67.
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
79.
80.
81.
82.
83.
84.
85.
A fixed steady rest is fixed to the lath bed and only used to
a) support at one fixed place only
b) Only support the chucks
c) Support the both ends
d) only support centres
86.
87.
88.
89.
90.
*************************
ANSWER
1. (C)
2. (B)
3. (A)
4. (C)
5. (B)
6. (D)
7. (D)
8. (D)
9. (A)
10. (D)
11. (C)
12. (C)
13. (C)
14. (A)
15. (B)
16. (C)
17. (A)
18. (C)
19. (A)
20. (A)
21. (D)
22. (D)
23. (A)
24. (C)
25. (A)
26. (C)
27. (B)
28. (B)
29. (A)
30. (B)
31. (D)
32. (A)
33. (B)
34. (C)
35. (C)
36. (B)
37. (A)
38. (B)
39. (A)
40. (A)
41. (B)
42. (B)
43. (B)
44. (A)
45. (A)
46. (A)
47. (C)
48. (C)
49. (B)
50. (B)
51. (C)
52. (B)
53. (D)
54. (C)
55. (C)
56. (D)
57. (B)
58. (D)
59. (B)
60. (D)
61. (D)
62. (D)
63. (B)
64. (B)
65. (C)
66. (A)
67. (C)
68. (A)
69. (D)
70. (C)
71. (A)
72. (D)
73. (C)
74. (D)
75. (A)
76. (C)
77. (C)
78. (D)
79. (C)
80. (C)
81. (C)
82. (D)
83. (D)
84. (D)
85. (A)
86. (D)
87. (A)
88. (D)
89. (C)
90. (C)