Beruflich Dokumente
Kultur Dokumente
WebTitan
WPAD file
Via System Setup -> Autoconfiguration, you can upload a WPAD file which details
the WebTitan proxy settings to your browser.
A sample WPAD.dat file is as follows:
------------------- Start ------------------------function FindProxyForURL(url, host){
if (
isInNet(host, "10.0.0.0", "255.255.255.0") ||
isPlainHostName(host) ||
localHostOrDomainIs(host, "127.0.0.1") ||
dnsDomainIs(host, ".company.local")
)
return "DIRECT";
else if (isInNet(myIpAddress(), "10.0.0.0", "255.255.255.0"))
return "PROXY <Webtitan Address>:8881";
}
----------------------- End -------------------------
This indicates that if the url request is to the internal network 10.0.0.0/24 then
the WebTitan proxy is bypassed. If the url request is to any other network and
comes from the internal network, then the WebTitan proxy is used.
You can then set the users browser to Auto-detect proxy settings for this
network or enter http://<The URL of WebTitan>/wpad.dat into the Automated
Proxy Configuration field of the browser options or preferences section.
See also http://en.wikipedia.org/wiki/Web_Proxy_Autodiscovery_Protocol
The browsing privileges of the user will be defined by the most permissive
setting of the combined policies.
4.3 Authentication
You can authenticate a user to use the proxy by:
IP address
LDAP
NTLM (NT Lan Manager) - in this case once the user has authenticated via
his Domain Controller he will be automatically authenticated to use the
WebTitan proxy.
5. The Dashboard
When you log on first to WebTitan you will see the dashboard as below: This
provides a snapshot of activity displaying the web sites that are being blocked by
your polices, the ones users are accessing and the overall web traffic.
6. Trouble Shooting
Via Support you can enable a Secure Remote Support Connection to WebTitan
support. This requires 8822 tcp to be enabled outbound. You can also e-mail
helpdesk@webtitan.com.
If a user is trying to access a url which is blocked by a policy, they will see a
WebTitan browser page explaining the reason for the error. This page can be
customized via Settings->Interface Settings. A sample page is as follows.