Sie sind auf Seite 1von 10

PROBLEM ABOUT SOLAR FLUX IN RIOHACHA

PRESENTED BY:
CAMILO GRACIA YNEZ
CODE: 0221220014
ELIECER RODRIGUZ ESCUDERO
CODE: 0221220037

PRESENTED TO:
ENG. GAIL GUTIRREZ

UNIVERSITY OF LA GUAJIRA
ENGINEERING FACULTY
ENGINEERING MECHANICAL PROGRAM
RIOHACHA, LA GUAJIRA

PROBLEM ABOUT FLUX SOLAR IN RIOHACHA


Consider a large plane wall of thickness L=0.06 m and thermal conductivity k =1.2
W/m2 C in space. The wall is covered with white porcelain tiles that have an
emissivity of 0.85 and a solar absorptivity of 0.26, as shown in Figure. The inner
surface of the wall is maintained at T1 300 K at all times, while the outer surface is
exposed to solar radiation that is incident at a rate of q =its gave by PROMEDIO
HORARIO DE LA RADIACIN MS ALTO EN LOS LTIMOS SES MESES DEL
PRESENTE AO. The outer surface is also losing heat by radiation to deep space

at 0 K.

To develop:
1. Cdigo en Matlab o Excel que resuelva el problema. Mantenerlo lo ms simple
posible. Documentar como lo usaran.
2. Realizar una tabla donde resuman los resultados: Mes, Flux solar, temperatura
de superficie, flux de conduccin en la pared. Especificar las unidades correctas
en el sistema internacional.
3. Llevar a cabo anlisis de sensibilidad mediante dos grfica absortividad de la
superficie Vs temperatura superficial Vs flux de conduccin variando la
absortividad en el intervalo [0.26, 1]. Superponer las dos grfica en una sola.
4. Enuncie las conclusiones sobre este fenmeno trmico en Riohacha.

DEVELOPMENT

***but, before to begin it will show table of average solar radiation in

Riohacha, now***

Therefore; it will need the hours more critical that its between or around at [11:00
A.M-12P.M.] like it see in the next table.
PD: after it having converted from Wh/m2 to W/m2

Months
December
January
February
March
April
May

Radiation Solar Flux


733,4 W/m2
682,8 W/m2
761,7 W/m2
809,5 W/m2
700,7 W/m2
796,1 W/m2

.Returning with the activity to solve


1.Matlab code or Excel that it solve the problem.
** It more possible simple**

It used Burcar Objetivo.

It used to determine or to find the unknown values an equation.

Method how does it use buscar objetivo en excel


Equalize the equation to zero (0) and to do the next.

( Tl )4

L )T 1=0
( K L )+Tl( qflux
K

a ( Tl ) +bTlc=0

L
qflux
, b=1 , c=
L T 1
donde ; a =
K
K
Then, to solve the equations values (a, b and c)

( )

And now, proceed.

And now, procced.

Go to buscar objetivos

Click on aceptar to see the answers.

In the case of qsolar , only it applied the heat transfer for conduction
formula but, in excel.

2- To make a table where it explain the results about: solar flux, month, conduction
flux in the wall and surface temperature.

3- To make two absorptivity graph in one : absorptivity vs. surface temperature vs.

Conduction flux of the wall.

CONCLUTION

Se puede deducir que de acuerdo a la cantidad de absortividad solar

Das könnte Ihnen auch gefallen