Beruflich Dokumente
Kultur Dokumente
Terms
This software is the property of Pressure Vessel Engineering Ltd (www.pveng.com).
If you use this product you agree to the following terms and conditions:
1 This program is the property of www.pveng.com
2 This program is not available for sale under any circumstances.
The user uses this software at their own risk.
3 This notice must be included with all copies made.
4 This product is used "as is" without warrantees or liability. It is your responsibility
to know how to use this software. Any product designed with this software
is your responsibility. www.pveng.com does not guarantee the accuracy of this product.
All risk associated with this products use is assumed by the user.
5 www.pveng.com does not provide support for the use of this product
6 The codes and standards that this product is based on change periodically. It
is your responsibility to check that you are using an appropriate version.
7 This program is not a substitute for knowing the applicable codes and standards.
8 It is your job to ensure that you are using the most up-to-date version of this software
9 There is no guarantee that future versions of this program will be made available.
Locked Cells
This spreadsheet is locked for your convenience. You can move between input
cells using the Tab key. The password to unlock it is "100". If you make changes
to this spreadsheet you are required to remove the "www.pveng.com"
hyperlink. You are responsible for any and all changes that you make.
Comments
If you have comment, corrections or questions about this product send an email
to lb@pveng.com. I am sorry, but I do not answer all emails.
lb@pveng.com
Verification
This program was verified in one of the following ways
1 comparing it with an ASME code book examples - most examples are found in App. L
2 Hand calculations
3 Comparison with other commercial software
4 two or more of the above methods
Although every effort was made to make this software accurate and easy to understand, there
is no way to guarantee that it is accurate.
Registration
This program can not be registered. It remains the property of www.pveng.com
20 500.0 <- P, interior pressure 144.6 <- Approx. weight (lbs, steel)
21 0.0 <- Pa, exterior Pressure 0.57 <- Volume (cuft, includes skirt)
22 1 <- B, From Exterior pressure curve 0.005952 <- A to lookup B
23
24 Variables:
25 t= tf - corr =1-0 t= 1
26 D= Do-2*t = 20-2*1 D= 18
27 L /r = L/IKR = 20/1.25 L /r = 16.000
28 M= 0.25*(3+sqrt(L/ikr)) = 0.25*(3+sqrt(20/1.25)) M= 1.750
29 Ro = L + tb = 20 + 1 Ro = 21.000
30
39 Exterior Pressure:
40 A = 0.125/(Ro/t) = 0.125/(21/1) Ro = L A = 0.00595
41 PaMax = B/(Ro/t) = 1/(21/1) Okay PaMax = 0.0
42 TminE = (Ro*Pa)/B = (21*0)/1 Okay TminE = 0.000
43
56
Flanged and Dished Head
Update Log
Date Change
1-Jan-99 Program Written
16-May-99 Added Audit Sheet
Check Spelling
Moved Factor M and Volume calculations onto separate sheets
Checked Against L-1.5.2(g) - Sample Calculations
7-Oct-99 Updated Graphics to A99 Standard
9-Oct-99 Re-arranged contents to make page 2 optional
Added Maximum working pressure
Volume Calculations Checked
Added Stress Meter
Set Sample Values
Checked Against A99 Update
Locked Cells
10-Oct-99 Added print protection macro
12-Jan-00 Modified print protection macro
1-Jun-00 Hand Calculate Results
Refer to verification calculations
Changed Fr to mid radius (was set to ID)
Added Commentary
Cells Locked
2-Oct-00 Updated to A2000 format version 1.1
New print macro
New legal statement
All info moved onto one sheet
Tested after moving and renaming the F&D head tab
Verified against ASME L1.5.1
Cells Locked - Password = "100"
1-Jun-01 E for minimum thickness in spherical zone changed to 1 per instructions from TSSA.
Required thickness is now less for reinforcement calcualtions
Version = 1.2
Cells Locked - Password = "100"
20-Jun-01 Added exterior pressure calculations
Updated to 2001 format
M factor changed from lookup chart to App 1-4 formula
version = 2.0
Verified against previous versions, hand calculations and ASME code samples
Cells Locked - Password = "100"
3-Jan-02 Updated to 2001 version
no changes to code
added BM entry cells
Cells Locked - Password = "100"
Version = 2.1
21-Feb-02 Added L/r error message for M
Version = 2.11
5-Mar-02 Added Error Messages on Exterior Pressure - thick and PaMax
Version 2.12
17-Mar-02 Updated method of calculating head dimensions
Version 2.13
Verifed against previous version
ctions from TSSA.
ode samples