Beruflich Dokumente
Kultur Dokumente
Guide
Alcatel-Lucent
7302/7330
Configuration
Template Guide
Etisalat Egypt
V1.2
Page 1
Table of Contents
1.
2.
OBJECTIVE............................................................................................................. 3
REFERENCE DOCUMENT.......................................................................................... 3
EQUIPMENT TYPES & SOFTWARE............................................................................3
DOCUMENT MANAGEMENT......................................................................................4
3.
ADSL SERVICE........................................................................................16
4.
SHDSL SERVICE.....................................................................................31
5.
VRF CONFIGURATION.............................................................................42
5.1
5.2
VRF
VRF
BETWEEN THE
BETWEEN THE
Page 2
SW
Release
R4.4
Description
Uplink and Controller Card
xDSL Line Termination Card
SHDSL Line Termination Card
NTIO extension Card
GE Electrical SFP
GE Optical SFP LX SM 1310nm
Page 3
Release
Date
V1.0
Oct-2013
V1.1
Oct-2013
V1.2
Nov-2013
Page 4
2. Network
Side Configuration
Assumed:
ISAM Name
ISAM IP Address
Default Gateway
AMS IP Address
IACM Community
SHUB Community
Management VLAN
Date and Time (yyyy-mm-dd:hh:mm:ss)
Uplink Interface
Ethernet mode
Etisalat-Cairo
10.10.10.2
10.10.10.1
192.168.100.2
Public
NETMAN
200
2013-06-15:13:35:00
0
Automatic
How to Configure:
configure vlan shub id 200 name Management mode reserved
configure system id Etisalat-Cairo mgnt-vlan-id 200 port-num-in-proto type-based
configure system shub entry vlan ext-vlan-id 200
configure system management host-ip-address manual: 10.10.10.2/24
configure system management default-route 10.10.10.1
configure system security snmp community NETMAN host-address 192.168.100.2/32
context shub
configure system security snmp community public host-address 192.168.100.2/32
admin sntp system-time 2013-06-15:13:35:00
Page 5
Page 6
Page 7
Page 8
FAN Failure will generate the below alarm on all the CLI
session.
leg:isadmin>#
13/10/03 15:01:01 major alarm occurred for shelf 1/1 : Fan alarm for fan #1
leg:isadmin>#
Page 9
and
and
and
and
troubleshoot
troubleshoot
troubleshoot
troubleshoot
the NT cards
NTIO cards
ISAM uplink interfaces
the uplink SFPs
Assumed:
Uplink Interface
Ethernet mode
Port-type
2
Automatic
network
How to Configure:
To configure the NT and NTIO card;
Note: NT-A by default will be configured, NT-B depend
on the redundant model used.
configure equipment slot nt-a planned-type nant-a unlock
configure equipment slot nt-b planned-type nant-a unlock
configure equipment applique iont:1/1 planned-type ncnc-d
Page 11
Page 12
Page 13
Page 14
4
nslt-a
How to Configure:
To configure LT, you need to plan the card. Make sure
its plugged-in
Note: You may plan without installing it, alarm will be
generated.
configure equipment slot lt:1/1/4 planned-type nslt-a unlock no power-down
Page 16
3. ADSL Service
Scope:
Configure ADSL service (VLAN, xDSL profiles,
Interfaces, PVC and bridge port).
Troubleshoot ADSL service.
Assumed:
Uplink interfaces
0,1
LT Card
10
LT Card Type
nals-a
Customer interface
Service VLAN
1000
layer2-terminated
PVC
Bridge MAC
addresses
Service Profile
Number
Service Profile Name
Service Profile
Speed (US/DS)
Spectrum Profile
Page 17
0/35
10
2
xDSL_10M
1M/10M
3
Customer VLAN
Customer VLAN
mode
Encapsulation
cross-connect
PPPoE
xDSL_Spectrum
ADSL/ADSL2/ADSL
2+
physical-id
vlan
vlan
vlan
vlan
shub
shub
shub
shub
id
id
id
id
1000
1000
1000
1000
inner
Page 18
configure
configure
configure
configure
configure
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
4. SHDSL Service
Page 36
0,1
LT Card / Customer
11 / 2
Encapsulation
LT Card Type
Customer VLAN
Customer VLAN
mode
S-C VLAN Model
max-line-rate
nslt-a
150
crossconnect
1500/1102
2048
Encapsulation
PVC
SHDSL-XinQService
atm native
(IPoA)
efm (IPoE)
8/35
192.168.100.2
192.168.100.1
256
If you will use ATM mode, SHDSL physical layer will be configured as
below.
configure shdsl span 1/1/11/2 op-mode native wire-mode two-wire
configure shdsl span 1/1/11/2 active admin-up
configure atm pvc 1/1/11/2:8:35 aal5-encap-type llc-snap-routed no admin-down
configure atm ip-cross-connect 1/1/11/2:8:35 next-hop 192.168.100.1 cpe
192.168.100.2
Page 37
If you will use EFM mode, SHDSL physical layer will be configured as
below.
Note: No PVC required.
configure shdsl span 1/1/11/2 wire-mode two-wire efm-hs-sele auto
op-mode efm min-line-rate 256 max-line-rate 2048 active adminup
configure shdsl span 1/1/11/2 active admin-up
Configure the customer side bridge port for Dot1Q encapsulation
mode.
configure vlan id 150 mode cross-connect name SHDSL-Service
configure bridge port 1/1/11/2
configure bridge port 1/1/11/2 vlan-id 150
configure bridge port 1/1/11/2 pvid 150
SHDSL Bonding
If bonding required, change the wire mode to four/six/eight wire
mode
Page 38
Where;
N= is number of pairs (1, 2, 3, 4 pairs)
i= integer value from 0: 86
Below table indicates all the possible values for two, four, six and
eight wire mode.
0
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
Two Wire
Mode
192
256
320
384
448
512
576
640
704
768
Four Wire
Mode
384
512
640
768
896
1024
1152
1280
1408
1536
Six Wire
Mode
576
768
960
1152
1344
1536
1728
1920
2112
2304
Eight Wire
Mode
768
1024
1280
1536
1792
2048
2304
2560
2816
3072
832
1664
2496
3328
896
1792
2688
3584
960
1920
2880
3840
1024
2048
3072
4096
1088
2176
3264
4352
1152
2304
3456
4608
Page 39
1216
2432
3648
4864
1280
2560
3840
5120
1344
2688
4032
5376
1408
2816
4224
5632
1472
2944
4416
5888
1536
3072
4608
6144
1600
3200
4800
6400
1664
3328
4992
6656
1728
3456
5184
6912
1792
3584
5376
7168
1856
3712
5568
7424
1920
3840
5760
7680
1984
3968
5952
7936
2048
4096
6144
8192
2112
4224
6336
8448
2176
4352
6528
8704
2240
4480
6720
8960
2304
4608
6912
9216
2368
4736
7104
9472
2432
4864
7296
9728
2496
4992
7488
9984
2560
5120
7680
10240
2624
5248
7872
10496
2688
5376
8064
10752
2752
5504
8256
11008
Two Wire
Four Wire
Six Wire
Page 40
Eight Wire
Mode
Mode
Mode
2816
5632
8448
11264
2880
5760
8640
11520
2944
5888
8832
11776
3008
6016
9024
12032
3072
6144
9216
12288
3136
6272
9408
12544
3200
6400
9600
12800
3264
6528
9792
13056
3328
6656
9984
13312
3392
6784
10176
13568
3456
6912
10368
13824
3520
7040
10560
14080
3584
7168
10752
14336
3648
7296
10944
14592
3712
7424
11136
14848
3776
7552
11328
15104
3840
7680
11520
15360
3904
7808
11712
15616
3968
7936
11904
15872
4032
8064
12096
16128
4096
8192
12288
16384
4160
8320
12480
16640
4224
8448
12672
16896
4288
8576
12864
17152
4352
8704
13056
17408
Page 41
4416
8832
13248
17664
4480
8960
13440
17920
4544
9088
13632
18176
4608
9216
13824
18432
4672
9344
14016
18688
4736
9472
14208
18944
4800
9600
14400
19200
4864
9728
14592
19456
4928
9856
14784
19712
4992
9984
14976
19968
5056
10112
15168
20224
5120
10240
15360
20480
5184
10368
15552
20736
5248
10496
15744
20992
5312
10624
15936
21248
5376
10752
16128
21504
5440
10880
16320
21760
5504
11008
16512
22016
Two Wire
Mode
8
4
8
5
8
6
Four Wire
Mode
Six Wire
Mode
Eight Wire
Mode
5568
11136
16704
22272
5632
11264
16896
22528
5696
11392
17088
22784
configure
configure
configure
configure
Page 42
configure
configure
configure
configure
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 49
Page 50
5. VRF Configuration.
VRF is a virtual router configured on the ISMA. Its used
to verify the L2 connectivity between the ISAM and the
Core from one side and between the ISAM and CPE
Page 51
101
SHUB-IPoA
200
IPoA-L2T-2nd
CORE IP
SHUB IP
Uplink interface(s)
VLAN mode
200.200.200.1/24
200.200.200.2/24
2
layer2-term-nwport
Page 52
Page 53
Page 54
Page 55
Page 56
Page 57
101
IPoA-IACM-vrf
IPoA-SHUB-vrf
100
IPoA-IACM-VLAN
IPoA-SHUB-VLAN
CPE IP
SHUB IP
xDSL port & atm
xDSL mode
VLAN mode (IACM)
VLAN mode (SHUB)
100.100.100.1/24
100.100.100.2/24
1/1/9/1:8:35
SHDSL
layer2-terminated
v-vlan
Page 58
Page 60
Page 61
Page 62
show ip vrf-media
leg:isadmin># show ip vrf-media
=====================================================
========================vrf-media table
=====================================================
========================slot:vrf |ip-address
|mac-addr:vlan
----------+--------------+--------------------------------------------------------------------------------------------------------1/1/9:101 100.100.100.2 00:07:72:60:3c:c0:00:64
----------------------------------------------------------------------------------------------------------------------------------vrf-media count : 1
=====================================================
========================
show ip vrf-media detail
leg:isadmin># show ip vrf-media detail
=====================================================
========================vrf-media table (detailed)
=====================================================
========================
----------------------------------------------------------------------------------------------------------------------------------vrf-media
----------------------------------------------------------------------------------------------------------------------------------slot:vrf : 1/1/9:101
ip-address : 100.100.100.2
mac-addr:vlan : 00:07:72:60:3c:c0:00:64
last-changed : 1970-01-08:02:42:48
=====================================================
========================
Page 63
Page 64
Page 65
Page 66
Page 67
Page 68
End of Document
Page 69