Beruflich Dokumente
Kultur Dokumente
Output Transformer plays the most significant roll in vacuum tube amplifier since its performance defines the limitation of the
amplifier. The need of broad frequency response with continuous fluctuation of power level means that good output
transformer could not be built on the same standard as power transformer although they share similar appearance. To build
as close as possible to an ideal output transformer we then employ extensive use of special arrangements and techniques,
materials and special complex designs and testing.
So often that people recognize the different in sound between output transformers but do not truly understand the reasons
behind. We took scientific as well as artistic approach to examine the fact and found that all good sounding output
transformers have performance very close to an ideal output transformer.
http://www.sacthailand.com/Transformer_SilkWinding.html[27-04-2016 09:59:22]
SAC Thailand
Permability comparison between Cold Rolled Grain Oreinted silicon steel and hot rolled
The winding technique we use is perfect lay "SILK" winding technique that put copper wire as close to each other as possible
to achieve tight coupling and reduce leakage inductance. This technique requires hand adjustment in each turn and no
automatic machine can match our hand winding.Using high quality core material and good lay of copper wire are useless
unless special winding technique, arrangement, correct implementation and utilization of the core are employed.
http://www.sacthailand.com/Transformer_SilkWinding.html[27-04-2016 09:59:22]
SAC Thailand
All things like wire size and grade, number of turns in each section, insulation thickness, winding force, vanish type, connection
sequence etc. need to match within very specific formula to yield acceptable result and these formula are trade secrete that's
why not many companies could build good output transformer.We based our research and development and compare with
Tango and AudioNote transformers and found that our transformers perform in same class to them in both scientific and live
listening environment and in some aspect surpass their design.
For Single ended output transformer with Air-Gap where there is DC current flowing, we take great care to the physical size
and material of Air-Gap to let the SE output Transformer process optimum inductance and will not saturate with peak output
power and provide great sound.
For Push-Pull output transformer, we emphasis the balance in coil configuration in many aspects such as DCR balance,
impedance balance, and magnetic balance to improve the performance/sound of the push-pull amplifier when utilizing our
output transformer.
Moreover other factors that effect output transformer's performance and sound are closely observed and we deploy special
technique to counteract. The results also mean wide band frequency response at both low and high output level with less dip
and peak, minimum raise and fall time with less phase shift and less ringing. This helps enormously when using our
transformers in feedback or non feedback circuit.
Finally when listening to our hand built output transformer, you may be surprised on how many good things had been missing
with other output transformers. The "SILK" winding technique represents smooth and refine response from bottom to end of
audio spectrum.
http://www.sacthailand.com/Transformer_SilkWinding.html[27-04-2016 09:59:22]