Beruflich Dokumente
Kultur Dokumente
Prepared by
Reviewed
by
Date
2009-06-20
Date
Confidentiality level
Inside publicity
Total 17pages
WCDMA Node B
Product version
V200R010C01B067SPCxxx
2016-06-25
HUAWEI Confidential
Page1, Total17
Security Level:
Contents
1. Introduction to Commissioning
2. Prerequisites for Node B Commissioning
3. Version Requirements
4. Software Upgradtion
5. Downloading Data Configuration File
6. Verifying whether Node B Commissioning is Successful.
2016-06-25
HUAWEI Confidential
Page2, Total17
Security Level:
The Node B hardware, such as the cabinet, cables, antenna feeders, and auxiliary devices, are
performed with the hardware installation checks.
The Node B cabinet is powered on and the RUN indicators on the boards are normal.
Node B data configuration file in XML format is already prepared using WRAN CME tool
with all the parameter in negotiation and accordance with RNC Node B script and data
planning.
2. Version Requirements
2016-06-25
HUAWEI Confidential
Page3, Total17
Security Level:
Fig 1
Login into Node B through the commissioning port ETH on WMPT card in slot 7 in BBU.
Default IP address of commissioning port is 17.21.2.15 & Subnet mask 255.255.255.0
2016-06-25
HUAWEI Confidential
Page4, Total17
Security Level:
Fig. 2
4. Software Upgradation
After logging into Node B through commissioning Port click the Maintenance tab as
shown in Figure 3 below.
2016-06-25
HUAWEI Confidential
Page5, Total17
Security Level:
Fig. 3
Fig. 4
2016-06-25
HUAWEI Confidential
Page6, Total17
Security Level:
Click the Upgrade BOOTROM option to upgrade the BOOTROM software as shown
in Figure 5.
Fig. 5
2016-06-25
HUAWEI Confidential
Page7, Total17
Security Level:
Fig. 6
Click the Browse option and select the path of the folder from where Node B
software is to be downloaded as shown in Figure 7.
2016-06-25
HUAWEI Confidential
Page8, Total17
Security Level:
Fig. 7
Refer to example below for more clarification. This example is formy laptop,
you need to define path according to your laptop where you had saved the
Node B software.
Example:D:\3GTECHNOLOGY\SOFTWARE\DBS3900WCDMAV200R010C01B067\DBS390
0 WCDMA V200R010C01B067 VER\csp\Publish
After providing the folder path from where BOOTROM software is to be downloaded
click the START option and BOOTROM Software will start downloading.
Note:- You can check the details whether all the boards BOOTROM version is
2016-06-25
HUAWEI Confidential
Page9, Total17
Security Level:
upgraded or not by clicking the option View Details as shown below in fig.8.
Fig. 8
After the execution succeed message is displayed as shown above press the
Previous tab to go back to previous menu and select the Upgrade Node B
Software as shown in Figure 9 below.
2016-06-25
HUAWEI Confidential
Page10, Total17
Security Level:
Fig.9
Now select the options as shown in Figure 10 and deselect all other options.
2016-06-25
HUAWEI Confidential
Page11, Total17
Security Level:
Fig. 10
After defining the path of folder from Node B software is to be downloaded click the START
Note:- You can check the details whether all the boards version is upgraded or not
by clicking the option View Details .
2016-06-25
HUAWEI Confidential
Page12, Total17
Security Level:
Fig. 11
Note:- After the successful software upgradtion Node B will restart automatically for new
version to become effective and Node B version will be changed to new version i.e
V200R010C01B067SPCxxx and LAN connection will be disconnected for some time wait
for LAN connection to become before you run the XML data configuration file.
Now select the data file transfer option in the Software management tree as shown
in the figure 12 below.
Only select the options as shown in figure 12 and deselect all other options.
2016-06-25
HUAWEI Confidential
Page13, Total17
Security Level:
Fig. 12
After selecting the above option click the Browse option and define the path of
folder where Node B XML configuration file is save.
After defining the path click the Start option and Node B XML script will start
running and progress meter will show the progress.
2016-06-25
HUAWEI Confidential
Page14, Total17
Security Level:
Fig. 13
Now Node B is commissioned and we need to check whether the physical link
between Node B and RNC is ok.
First confirm with RNC engineer whether He/She had already run the script or data
configuration file for IuB interface on RNC side or not.
Ask Him /Her to activate the Cells corresponding the this Node B.
2016-06-25
HUAWEI Confidential
Page15, Total17
Security Level:
Check whether Locell is available or not by running the command DSP LOCELL
If the cell state is available and Enabled, then we can start call testing.
If locell is not available we need to do the troubleshooting and check the items from
top to bottom.
If there is still some problem and cell is not setup and enabled, contact the RAN
Expert in your circle for online support.
2016-06-25
HUAWEI Confidential
Page16, Total17
Security Level:
2016-06-25
HUAWEI Confidential
Page17, Total17