Beruflich Dokumente
Kultur Dokumente
STANDARD
ICS: 13.220.20
Descriptors: fire hydrant, systems equipment, wet risers
Copyright 2011
DEPARTMENT OF STANDARDS MALAYSIA
SIRIM Berhad
(Company No. 367474 - V)
1, Persiaran Dato Menteri
Section 2, P.O. Box 7035
40700 Shah Alam
Selangor Darul Ehsan
MALAYSIA
E-mail: central@standardsmalaysia.gov.my
E-mail: msonline@sirim.my
Engineering Industry
Standards Committee and endorsed by the Council of the Standards and Industrial Research
Institute of Malaysia (SIRIM) was published under the authority of the SIRIM Council in
February, 1991.
SIRIM wishes to draw attention to the fact that this Malaysian Standard does not purport to
include all the necessary provisions of a contract.
The Malaysian
industries concerned. Suggestions for improvements will be recorded and in due course brought
to the notice of the Committees charged with the revision of the standards to which they refer.
Date of issue
Text affected
CONTENTS
Page
Committee representation
Foreword
SECTION ONE: GENERAL
1
Scope
Definitions
Valve types
Temperature rating
Marking
Materials
Valve bodies
10
Valve inlets
11
Valve outlets
10
12
Bonnets
10
13
Stems
10
14
13
15
13
16
13
17
13
18
Bolting
13
19
Pressure retention
14
20
Strap
14
21
14
22
14
23
15
24
15
CONTENTS (Contd.)
Page
SECTION THREE: PRODUCTION TESTING REQUIREMENTS
AND TEST CERTIFICATE
25
1-lydrostatic tests
16
26
16
27
Test certificate
16
Figure 1
Valve types
11
13
17
18
Test methods
17
21
Tables
Appendices
Publications
22
Committee representation
The Mechanical Engineering Industry Standards Committee under whose supervision this Malaysian Standard was prepared,
comprises representatives from the following Government Ministries, trade, commerce and manufacturer associations and
scientific and professional bodies.
Malaysian Motor Vehicle Assemblers Association
Ministry of Works and Utilities (Public Works Department)
Ministry of Manpower (Factory and Machinery Department)
Malaysian Industrial Development Authority (MIDA)
Universiti Teknologi Malaysia
Institution of Engineers(Malaysia)
Ministry of Defence (Defence Science and Technology Centre)
The Technical Committee on Fire Prevention and Protection comprising which prepared this Malaysian Standard consists of
the following representatives:
Encik M. Chelliah (Chairman)
Kapt. Kamaruddin Abu Hassan
Jr. Dr. Ow Chee Sheng
BOMBA
Kementerian Pertahanan
JEM
PAM
MFPA
Persatuan Keselamatan Perindustrian Malaysia (MSI5)
.IKJ
Standards and Industrial Research Institute of Malaysia
The Technical Sub-Committee on Equipment for Fire Prevention and Protection which prepared this Malaysian Standard
consists of
Encik M. Chelliah (Chairman)
Mejar Akbar Din
Encik Yusof Sidek/Encik Pauzan Ahmad
Cik Patsy Chia
BOMBA
Kementerian Pertahanan
BOMBA
MSIS
JEM
Standards and Industrial Research Institute of Malaysia
Co-opted members
Encik William Kong
Encik Michael Toh
Encik Allen Wong/
Encik Desmond De Rozaria
Encik Y.S. Ong
Encik T.W. Chow
Encik L.K. Ong
Encik Mat Khajr Salbin
FOREWORD
This Malaysian Standard was prepared by the Technical Sub-committee on Equipment for Fire
Prevention and Protection formed by the Technical Committee on Fire Prevention and Protection
under the authority of the Mechanical Engineering Industry Standards Committee.
This standard was based on BS 5041 : Part I : 1987 Fire hydrant systems equipment, Specification
for landing valves for wet risers, which specifies requirements for valves suitable for use on wet
risers of either high or low pressure installations.
The subjects of the other Parts in the MS 1210 series of general specifications for fire hydrant
systems equipment are as follows.
Part 2.
Part 3.
Part 4.
Part 5.
These Parts give detailed requirements for most of the other special items required for wet and
dry risers described in *BS 5306 : Part 1.