Beruflich Dokumente
Kultur Dokumente
4.1.4
Applications Grid
HVA Adhesive
HVU Capsule
R
HIT HY 20 Adhesive
HIT HY 150/HIT-ICE
HIT-TZ rod
Masonry Construction
with Voids
Official Listings 6, 7
Miscellaneous
Corrosion 3
Application Criteria 2
Installation 2
Design
Criteria
1.
2.
3.
4.
5.
6.
7.
8.
w/HIT HY 150
w/HVU
w/HIS Insert
w/HIS Insert
w/HIS or HIT I
w/HIS or HIT I
7/8 Diameter
304 & 316
3/8, 1/2, 5/8, 3/4,
7/8, 1, 1-1/4
Stud, Rebar, Insert
Anchor is bonded to
base material
ER-5369
RR 25363
SBCCI 9930
7/8 Diameter
304 & 316
3/8, 1/2, 5/8, 3/4,
7/8, 1, 1-1/44
Stud, Rebar, Insert
Anchor is bonded to
base material
ER-5913
RR 25257
SBCCI 9930
01-1118.03
w/HIT I
w/HIT I
316
Stud
Expansion against &
Bonding to Base Material
ER-5942
Pending
Stud, Rebar
Stud, Insert
Base materials may vary widely. Site specific anchor testing may be required.
Most testing is performed in normal weight concrete. For specific base materials tested, see selected anchor.
Refer to Section 2.3 for a more detailed discussion on corrosion and corrosion resistance.
Listed diameters are those with published load data. Larger diameter threaded rods may be used. Contact Hilti for more information.
Refer to Section 4.1.2.1 for a more detailed discussion on anchor working principles.
Not all design criteria listed above are found in the official listings.
Please contact Hilti (www.us.hilti.com) for specific state DOT approvals.
HIT-ICE has no official listings at print date.
US: 1-800-879-8000 / www.us.hilti.com Hilti Product Technical Guide 2002 Canada: 1-800-363-4458 / www.ca.hilti.com
59
Anchoring Systems
4.1.4
Applications Grid
HIT RE 500
Epoxy Anchoring
System
HSE 2421
Epoxy Anchoring
System
HDA
Undercut Anchor
HSL Metric
Heavy-Duty Anchor
KWIK-BOLT II
Expansion Anchor
w/HIS Insert
w/HIS Insert
w/HIS Insert
w/HIS Insert
7/8 Diameter
304 & 316
3/8, 1/2, 5/8, 3/4,
7/8, 1, 1-1/44
Stud, Rebar, Insert
7/8 Diameter
304 & 316
3/8, 1/2, 5/8, 3/4,
7/8, 1, 1-1/44
Stud, Rebar, Insert
316
M10, M12, M16
M20
Stud
Anchor is bonded to
base material
Pending
Pending
Anchor is bonded to
base material
ER-5605
RR 25408
Metal Undercut
Keying
ER-5608
RR 25422
Official Listings 6, 7
Miscellaneous
Corrosion 3
Application Criteria 2
Installation 2
Design
Criteria
1.
2.
3.
4.
5.
6.
7.
60
w/Counter Sunk
01-1001.03
3/8-3/4 sizes
3/8 w/rod coupler
Base materials may vary widely. Site specific anchor testing may be required.
Most testing is performed in normal weight concrete. For specific base materials tested, see selected anchor.
Refer to Section 2.3 for a more detailed discussion on corrosion and corrosion resistance.
Listed diameters are those with published load data. Larger diameter threaded rods may be used. Contact Hilti for more information.
Refer to Section 4.1.2.1 for a more detailed discussion on anchor working principles.
Not all design criteria listed above are found in the Official Listings.
Please contact Hilti (www.us.hilti.com) for specific state DOT approvals.
US: 1-800-879-8000 / www.us.hilti.com Hilti Product Technical Guide 2002 Canada: 1-800-363-4458 / www.ca.hilti.com
Anchoring Systems
4.1.4
Key: Very Suitable
Anchor
Products
HCA
COIL ANCHOR
HDI / HDI-L
Drop-In Anchor
HDI-P
Drop-In Anchor
HLC
Sleeve Anchor
KWIK-CON II
Screw Anchor
Official Listings 6, 7
Miscellaneous
Corrosion 3
Application Criteria 2
Installation 2
Design
Criteria
1.
2.
3.
5.
6.
7.
303
1/4, 3/8, 1/2, 5/8,
3/4
Insert
Metal Expansion
Coil
Impact Expansion
Sleeve
ER-2895
RR 23709
SBCCI 9930
3/8
Insert
Impact Expansion
Sleeve
304
410
1/4, 3/8, 5/16, 1/2,
3/16, 1/4, 3/8,
5/8, 3/4
Torx HWH, Torx Flat Head,
Bolt, rod coupling,
hex nut, wire tie
Phillips Flat Head
Metal Circumferential
Thread Undercut
Expander Sleeve
Keying
ER-5259
01-0727.01
3/8"-3/4" Sizes
3/8"-3/4" Sizes
1/2"-3/4" Sizes
3/8" Size
Base materials may vary widely. Site specific anchor testing may be required.
Most testing is performed in normal weight concrete. For specific base materials tested, see selected anchor.
Refer to Section 2.3 for a more detailed discussion on corrosion and corrosion resistance.
Refer to Section 4.1.2.1 for a more detailed discussion on anchor working principles.
Not all design criteria listed above are found in the Official Listings.
Please contact Hilti (www.us.hilti.com) for specific state DOT approvals.
US: 1-800-879-8000 / www.us.hilti.com Hilti Product Technical Guide 2002 Canada: 1-800-363-4458 / www.ca.hilti.com
61
Anchoring Systems
4.1.4
Applications Grid
Metal HIT
Anchor
HPS-1
Impact Anchor
HLD Kwik-Tog
HSP/HFP
Drywall Anchor
IDP Insulation
Anchor
Corrosion 3
Application Criteria
Installation 2
Design
Criteria
Normal Weight Concrete
Lightweight Concrete
Prestressed/Precast Concrete
Grout Filled Concrete Block
Hollow Concrete Block
Solid Brick
Hollow Brick
Hard Natural Stone
Soft Natural Stone
Gypsum Wallboard
Oversized Holes
Cored Holes
Damp Holes (per ICBO)
Wet Holes (per ICBO)
Submerged
In-place (through) Fastening
Immediate Loading
Bolt Head or Flush Finish
Removable to Flush Surface
Seismic (per ICBO)
High Cycle Fatigue
Shock/Impact Load
High Temperature Resistance
Electrodeposited or
Mechanically Zinc Plated
Zinc-Aluminum Alloy
Plastic
Miscellaneous
Stainless Steel
Anchor Diameters
Available (in.)
Anchor Versions Available
Anchor Working Principles5
(Drive Pin)
(Body)
(Body)
304
(Drive Pin)
3/16, 1/4
(Drive-screw)
304
(Drive-screw)
3/16, 1/4, 5/16
Nail
Drive-screw
Impact Expansion
Anchor
Impact Expansion
Anchor
Anchor holds
by keying
#8, #10
Keying in hollow
base materials. Friction
in solid base materials.
Self-drilling
Self-tapping
Round Head
Plastic
Anchor holds
by friction
1. Base materials may vary widely. Site specific anchor testing may be required.
3. Refer to Section 2.3 for a more detailed discussion on corrosion and corrosion resistance.
5. Refer to Section 4.1.2.1 for a more detailed discussion on anchor working principles.
62
US: 1-800-879-8000 / www.us.hilti.com Hilti Product Technical Guide 2002 Canada: 1-800-363-4458 / www.ca.hilti.com