Beruflich Dokumente
Kultur Dokumente
Coating Thickness Gloss Porosity Adhesion Surface Roughness Surface Cleanliness Climatic Conditions Electrostatic Inspectors Accessories
ASTM G62-A
ISO14654
NACE RP 0188
BS 7793-2
NACE TM0384
ASTM D 5162-A
JIS K 6766
ASTM G6
AS 3894.2
Pintech
The Pintech has test voltages of 9 Volts, 67.5 Volts and 90
Volts, which are easily selectable.
Pintech Specifications
Part No
Range
Maximum Test
Thickness 9V
S3002
Maximum Test
Maximum Test
Thickness 67.5V Thickness 90V
Accuracy
Sponge Size
500m
20mils
1%
500m
20mils
Cal Cert
Part No
Coating Thickness Gloss Porosity Adhesion Surface Roughness Surface Cleanliness Climatic Conditions Electrostatic Inspectors Accessories
Pintech Accessories
Part No
Product
Size
Metric
Size
Imperial
Extension
Size
SA002
Extension Rod
500mm
20
SA003
Extension Rod
1000mm
40
SA601
50mm
200mm / 8
SA602
100mm
200mm / 8
SA701
200mm
200mm / 8
SA102
Earth Cable
10m
Information
To extend Sponges for applications
where a long reach is required.
Circular Sponges for the testing of
internal diameter of pipes.
For coatings on large flat areas.
Larger testing area Earth Cables.
Operation
Safety
Testing
Replacing Battery
When the battery requires replacement, the red Lo Bat
indicator will illuminate. To replace, remove the cover located
on the rear of the instrument. Replace with an alkaline PP3
battery, ensuring correct polarity.
About us
Recalibration
www.paint-test-equipment.com
Distributor
Paint Test Equipment reserves the right to alter specifications without prior notice. Copyright Paint Test Equipment.