Beruflich Dokumente
Kultur Dokumente
Deployment
Version 2.3.11
August 2013
www.lexmark.com
CONTENTS
Overview ........................................................................................................................................................................3
Requirements ................................................................................................................................................................3
Server System Requirements .....................................................................................................................................3
eSF Applications .........................................................................................................................................................3
1.
2.
3.
4.
5.
6.
Locations ......................................................................................................................................................7
ucf files.......................................................................................................................................................................7
1.
BadgeAuth.ucf ..............................................................................................................................................7
2.
BadgeAuth2.ucf ............................................................................................................................................7
3.
4.
locations .....................................................................................................................................................10
Page 2
OVERVIEW
The Embedded Solutions Framework (eSF) apps required to use Lexmark Print Management are provided with the
solution. In order to simplify the deployment of the apps, the Lexmark Management Console provides the ability
to configure and push the apps to printers.
This document details how to use the deployment features found in the Lexmark Management Console.
Note: Version numbers are subject to change. This document was written for Lexmark Print Management 2.3.11.
REQUIREMENTS
SERVER SYSTEM REQUIREMENTS
Before the apps may be deployed, Lexmark Print Management v2.3.10 or later must be installed and configured.
ESF APPLICATIONS
1. LDD ESF APPLICATION:
advancedprompt v4.7.1
-
Description: Provides basic prompts for the user at the printers op panel.
Compatible eSF framework: eTask2, eTask2+, eTask3, eTask4
badgeauth v2.6
-
deviceusage v1.4
-
Page 3
keyboardreader v2.3.1
-
omnikey5427ckdriver v1.0.5
-
omnikeydriver v2.4.4
-
See the Install Guide for definitions of the various eTask interfaces.
3. SUPPORTED PRINTERS
See the Device Support list document for supported printers and MFPs.
deviceusage
Card reader drivers: keyboardreader, omnikey5427ckdriver, omnikeydriver
advancedprompt
badgeauth
Note: The correct compatible eSF framework level and the recommended deployment order are installed
by default with the print release solution.
Page 4
To view the eSF applications and their settings, go to LMC -> Device Groups -> Print Release (1. Device
Groups box) -> eSF Configuration (2. Tasks box)
b.
To change the deployment order, use the up and down arrow on the eSF configuration view:
Page 5
c.
To exclude an eSF application from a policy update, uncheck the Deploy to: in the eSF setting view. By
default, advance prompting is the only eSF application that is set to be part of the policy update:
d.
To configure eSF application settings in deployment, go to the setting view and fill in setting values as
needed:
Page 6
6. LOCATIONS
a.
b.
UCF FILES
The deployment feature can also push UCF files.
1. BADGEAUTH.UCF
-
2. BADGEAUTH2.UCF
-
Description:
1. Configure ldap security building block
2. Set up a ldap security template associated with the building block in #1
3. Set up a badgeauth security template associated with BadgeAuth eSF application
4. Apply the security template in #2 to an access control (solution id)
5. Apply the security template in #3 to an access control (solution id)
Compatible eSF framework: eTask2+, eTask3, eTask4
Optional: only needed if ldap is used for authentication and badgeauth eSF application is used
Page 7
Page 8
b.
To specify a policy update to use device group level of ucf files, go to the Security Setup Files view in
Device Groups tab, and uncheck Use Solution Configuration checkbox:
c.
To exclude an ucf file from a policy update, uncheck all the checkboxes listed under Deploy to: in
the ucf view:
Page 9
d.
4. LOCATIONS
C:\Program Files\Lexmark\Solutions>\Apache2\htdocs\apachewebdav\ucf\PrintReleasev2
Page 10