Beruflich Dokumente
Kultur Dokumente
TYPES
900 352
900 352A
920 555
Transparent
910 X01
912 X02
A20C 333
100 322
100 X01
250 X10
500 322
532 X02
700 314
General Purpose
700 X01
700 SG5
600 309
600 X06
600 X50
600 X52
100G-10
Glass Fibre
100G-10T1
Reinforced ABS
100G-20
(ABSG)
100G-30
Glass Fibre
ASG-10
Reinforced AS ASG-20
ASG-30
(ASG)
420Y MH1
430Y MH1
440Y MH1
440Y MH5
450Y MH1
450Y MH5
450Y X10
High Heat ABS
460Y MH1
470Y MH1
450G-10R
450G-20R
450G-20S
450G-30R
450Y BM1
884 X01
824V X01
834V X01
Flame Retardant
834V X06
844V X05
855VG-20
Non Halogen
NH82C X01
Resistant ABS
AX05 X03
Chemical
AX05 X08
AX05 X32
Resistant
AX84 X01
100 MPM
100 MPF
100 MPJ
Painting
100 MPK
440Y X50
450Y X50
315 X01
Plating
325
335 MPL
VX10G20
RFX10 X01
RJX2G-20
RJX2G-30
Alloy
PX10 X06
PX10 X07
RNX82
RNX84
100N X01
100N X02
Green Natural 100N 322
700N X02
Rubber ABS
335N X01
100N MPJ
Processing
Features
Injection
Injection
Injection
Injection
Injection
Injection and
Extrusion
Injection
Injection
Injection
Injection
Injection
Injection
Extrusion
Extrusion
Extrusion
Extrusion
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
High Rigidity
Scratch Resistant
High Scratch Resistant
SAN Standard
High Impact Strength
Super High Impact Strength
High Flow
High Rigidity
Abrasion Resistant, High Sliding
Medium Impact Strength
High Flow Medium Impact
Medium Impact High Gloss
Extrusion
Extrusion
Extrusion, Thermoforming, High Impact Strength
Extrusion, Profile Extrusion
10% Glass Fiber Reinforced ABS
10% Glass Fiber Reinforced ABS, High Flow
20% Glass Fiber Reinforced ABS
30% Glass Fiber Reinforced ABS
10% Glass Fiber Reinforced AS
20% Glass Fiber Reinforced AS
30% Glass Fiber Reinforced AS
High Heat (DTL 88oC)
High Heat (DTL 90oC)
High Heat (DTL 92oC)
High Heat High Flow (DTL 92oC)
Medium High Heat (DTL 98oC)
Medium High Heat High Flow (DTL 98oC)
Medium High Heat (DTL 95oC)
Medium High Heat (DTL 100oC)
Super High Heat (DTL 104oC)
10% Glass Fiber Reinforced ABS (DTL 114oC)
20% Glass Fiber Reinforced ABS (DTL 118oC)
20% Glass Fiber Reinforced ABS, Super High Heat (DTL 128oC)
30% Glass Fiber Reinforced ABS (DTL 121oC)
High Heat Blow Molding (DTL 101oC)
0.75mm V-2, 1.5mm V-0, 2.5mm 5VA
0.75mm V-2, Light Resistance
2.0mm V-0, 3.0mm 5VA, Light Resistant
2.0mm V-0, 3.0mm 5VA, Light Resistant
1.5mm V-0, 2.5mm 5VA, 2.0mm 5VB, Light Resistant
20% Glass Fiber Reinforced ABS, 1.5mm V-0, 2.5mm 5VA
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Injection
Standard
High Flow
High Rigidity
Flame Retardant, 1.5mm V-0
Medium Impact Strength
High Impact Strength
High Flow
High Flow
High Heat Painting (DTL 90oC)
High Heat Painting (DTL 93oC)
High Flow
Standard
High Flow, High Impact
Glass Fiber Reinforced ABS//PBT Resin
ABS//r-PET Alloy
20% Glass Fiber Reinforced AS//r-PET
30% Glass Fiber Reinforced AS//r-PET
PC//ABS Alloy, High Impact Strength
PC//ABS Alloy, Super High Impact Strength
r-PC//ABS alloy, 0.75mm V-2, 3.0mm V-2
r-PC//ABS alloy, 1.5mm V-0
Middle Impact Strength
Super High Impact Strength
High Impact Strength
High Flow
Plating
Painting
500 322
General
Purpose
532 X02
700 314
700 X01
700 SG5
Glass Fibre
Reinforced
ABS
(ABSG)
Glass Fibre
Reinforced
AS
High Heat
ABS
Flame
Retardant
600 309
600 X06
600 X50
600 X52
100G-10
100G-10T1
100G-20
100G-30
ASG-10
ASG-20
ASG-30
420Y MH1
430Y MH1
440Y MH1
440Y MH5
450Y MH1
450Y MH5
450Y X10
460Y MH1
470Y MH1
450G-10R
450G-20R
450G-30R
450G-20S
450Y BM1
884 X01
824V X01
834V X01
834V X06
844V X05
855VG-20
Non Halogen
Resistant
NH82C X01
ABS
AX05 X03
Chemical
AX05 X08
Resistant
AX05 X32
AX84 X01
100 MPM
100 MPF
Painting
100 MPJ
100 MPK
440Y X50
450Y X50
315 X01
Plating
325
335 MPL
VX10G20
RFX10 X01
RJX2G-20
RJX2G-30
PX10 X06
Alloy
PX10 X07
RNX82
RNX84
100N X01
Green Natural 100N X02
100N 322
Rubber ABS
700N X02
335N X01
100N MPJ
Important Notes:
1
Typical Application
LCD/PDP Panel, LCD Stand, Toys, Washing Machine, Control Panel, Telephone
Housing, Electric Rice Cooker Control Panel, Tape Cartridge Housing, Hand Phone
Charger, Copier Paper Tray, Computer Mouse, Cosmetic Compact Case, Disposal
Shaver, Binder Ring, DVD-ROM Control Button, Speaker Housing, etc
Juice Blender, Fan Blade, Vehiche Reflector, Cosmetic Case, Lighter Housing, etc
Telephone Cases, Blender, Table Lamp Body, Hair Dryer, Electrical Fan,CD Player
Parts, Casings for Instruments, Calculator Cases, Toys, Parts of Camera Body,
Remote Control Cars, Gun Toys, Mirror Casings, Clock Casing, etc.
Toys, Suitcase, Parts of Miscellaneous Goods, etc.
3.5" Micron Floppy Disc Cases, Video Cassette Guide Panels, VCR Front Panel,
Sophisticated Audio Parts, etc.
Audio & Video Cassette Cases, Remote Controller Cases, Air Cleaner Parts, Hand
Mixer Parts, Buttons & Handles of Audio Products, Parts of AV Products, Calculator
Cases, Toys, Toner Cartridges, Typewriter & Printer Ribbon Cartridges, Parts of
Camera Body, Part of Miscellaneous Goods, etc.
Digital Home Appliances, Parts of Miscellaneous Goods, etc.
Telephone Cases, Printers Parts, Headphone Stereo Body, Key Board, Vacuum
Cleaner Parts, Interior Parts of Refrigerator, Exterior Parts of Room Air-Conditioner,
Calculator Cases, Toilet Parts, Parts of Camera Body, Parts of Miscellaneous Goods,
etc.
Speaker Case, Piano Key, Cosmetic Case, Printer Outer Parts, Table Lamp Body,
Laptop Cases, Vacuum Cleaner Housing, Shaver Cases, etc
Housing Equipments, Electric Home Appliances, Generic Component/Livingware,
Digital Home Appliances, Suitcase, Funiture, Part of Miscellaneous Goods, etc.
Structural Parts of Camera, Audio Products, Printer & other OA Machines, etc.
Automobile Parts, Radiator Grill, Car Speaker Grill, Instrumental Panel, Central
Panel, Portable CD Player Casing, CD Changer, Car Audio Parts, Portable Cassette
Player Casing, etc.
Spoiler, Skirting, Door Mirror, Power Window Switch Panel, Door Garnish Panel,
Console, Car Trim, etc.
Plating for Automobile, Electro Plating Applications
Office Automation Equipment, Digital Home Appliance, Automobile Part, etc.
Green inovavtion product which can apply similar application as General Purpose
Structural Parts of Electrical Goods Components, Air-Conditioner Cooling Fan (Cross
Flow Fan, Propeller Fan, etc.),
Office Automation Equipment, Digital Home Appliance, Generic Component/
Livingware, Automobile Part, etc.
Computer Monitor, CD-ROM Parts, Fax Machine Parts, Photocopier Parts, Alarm
Devices, Laser Printers Housing, Jet Printers Power Surge Devices, Adaptor Casing,
Power Transformer Casing, Sockets Plugs, Disc Drive Parts, Air Conditioner Inner
Devices, etc.
Toys, Suitcase, Part of Camera, Parts of Miscellaneous Goods, etc.
Plating for Automobile, Electro Plating Applications
Painting Applications
In as much as Toray Plastics (Malaysia) Sdn, Bhd. has no control over the use to which other may put this material, it does not guarantee
that the same results as those described herein will be obtained. Nor does Toray Plastics (Malaysia) Sdn. Bhd. guarantee the
effectiveness or safety of any possible or suggested design for articles of manufacture as illustrated herein by any photographs, technical
drawing and the like. Each user of the material of design or both should make his own tests to determine the suitability of the material or
design or both for his own particular use. Statements concerning possible or suggested uses of the materials or designs described herein
are not to be construed as constituting a license under any Toray Plastics (Malaysia) Sdn. Bhd. Patent covering such use or as
recommendations for use of such materials or designs in the infringement of any patent.
The materials described herein are not recommended for medical applications involving any implantation inside the human body. Material
Safety Data Sheets for the materials concerned should be referred to before any use.
GRADE LINE UP
Feature
Group Grade
900
Middle Impact
920
High Rigidity
Transparent
910
Scratch Resistant
912
High Scratch Resistant
A20C
SAN Standard
100
High Impact
250
High Flow, High Rigididty
General
500
High Rigidity
Purpose
532
Abrasion Resistant , High Sliding
700
Middle Impact
600
Extrusion
824V
0.75mm V-2
834V
2.0mm V-0, 3.0mm 5VA
Flame
844V
1.5mm V-0, 2.5mm 5VA
Retardant
884
0.75mm V-2, 1.5mm V-0, 2.5mm 5VA
855VG
Glass Fibre Reinforced ABS Resin, 1.5mm V-0, 2.5mm 5VA
NH82C
Non Halogen, 0.75mm V-2, 3.0mm V-2
420Y
Heat Resistant
430Y
Heat
440Y
Resistant
450Y
High Heat Resistant
470Y
Super High Heat Resistant
450G
Glass Fiber Reinforced
450Y BM1 High Heat Blow Molding
ASG-10
Glass Fiber Reinforced AS Resin
ASG-20
Fiber
ASG-30
Reinforced 100G-10
100G-10T1
440Y X50
High Heat Painting
450Y X50
315
High Flow
Plating
325
Standard
335
High Flow High Impact
AX05 X03 Standard
Chemical
AX05 X08 High Flow
Resistant
AX05 X32 High Rigidity
RNX82
r-PC//ABS alloy, 0.75mm V-2, 3.0mm V-2
RNX84
r-PC//ABS alloy, 1.5mm V-0
Green Natural 100N
Middle/High/Super High Impact
Rubber ABS 700N
High Flow
Plating
335N
100N MPJ Painting
ABS
ABS
ABS
AS
ABS
ABS//PBT
ABS//PET
ABS//PET
PC//ABS
PC//ABS
//
TRANSPARENT GRADE
Property
Test
Method
Test
Condition
High Scratch
Resistant
High Scratch
Resistant
SAN
Standard
900
910
912
A20C
352
352A
X01
X01
333
Units
High Rigidity
Type
920
900
555
Suffix
ISO STANDARD
Melt Flow Rate
220C / 10 kg
ISO 1133
Tensile Strength
;
50 mm/min
Tensile Elongation at Break
ISO 527
Tensile Modulus
1 mm/min
Flexural Strength
ISO 178
2 mm/min
Flexural Modulus
Density
23C
ISO 1183
Light Transmittance
3 mmt
ASTM D1003
Haze
3 mmt
ASTM D1003
UL94
Flammability
File No. E41797
g/10min
25
18
20
28
30
26
kJ/m2
12
12
1.2
77
76
76
78
78
90
MPa
54
48
53
57
56
76
17
15
11
13
12
MPa
2500
2400
2670
77
66
76
85
83
125
2260
1870
2310
2630
2630
3600
kg/m3
1090
1080
1090
1100
1100
1070
88
86
87
87
78
90
2.6
16
HB
HB
HB
HB
HB
HB
MPa
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
Property
Test
Method
Test
Condition
Units
Type
Suffix
High
Impact
Super
High
High Flow
Impact
High
Rigidity
Abrasion
Resistant,
High
Sliding
,
Middle
Impact
Middle
Middle
Impact
Impact
High Flow High Gloss
Extrusion
100
100
250
500
532
700
700
700
600
600
600
600
322
X01
X10
322
X02
314
X01
SG5
309
X06
X50
X52
ISO STANDARD
Melt Flow Rate
220C / 10 kg
ISO 1133
Tensile Strength
;
50 mm/min
Tensile Elongation at Break
ISO 527
Tensile Modulus
1 mm/min
Flexural Strength
ISO 178
2 mm/min
Flexural Modulus
Toray Method
Glossiness
Incident Angle 60o
Density
23C
ISO 1183
UL94
Flammability
File No. E41797
g/10min
15
15
44
20
22
23
40
26
12
kJ/m2
20
26
14
14
12
17
18
13
22
21
30
23
83
80
83
85
83
82
81
82
82
83
82
82
MPa
51
44
55
59
55
54
51
56
47
57
42
46
>10
>10
>10
>10
>6
>10
>10
10
14
10
>40
17
MPa
2600
2100
2900
3000
2700
2600
2110
78
63
83
89
79
81
77
84
69
78
65
68
2370
2000
2650
2740
2690
2460
2370
2560
2080
2360
2080
2014
94
93
94
95
94
93
98
kg/m3
1040
1040
1040
1040
1050
1040
1040
1050
1040
1040
1030
1040
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
MPa
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
Test
Method
Property
Test
Condition
Glass
Fiber
Non
Reinforced
Halogen
ABS
Units
General
Purpose
Type
884
844V
834V
834V
824V
X01
X05
X01
X06
X01
35
32
50
37
11
46
kJ/m2
14
12
15
10
15
18
70
76
78
76
79
100
69
MPa
49
46
46
45
48
104
47
>5
>5
>5
>5
>5
>5
MPa
2700
2600
2500
2000
2500
2200
70
68
67
63
69
155
69
2500
2400
2400
1800
2400
7200
2200
kg/m3
1160
1170
1150
1140
1100
1340
1060
20
Suffix
Light Resistant
855VG-20
NH82C
X01
ISO STANDARD
Melt Flow Rate
200C / 5 kg
ISO 1133
g/10min
220C / 10 kg
Tensile Strength
;
50 mm/min
Tensile Elongation at Break
ISO 527
Tensile Modulus
1 mm/min
Flexural Strength
ISO 178
2 mm/min
Flexural Modulus
Density
23C
ISO 1183
Glass Content
Toray Method
MPa
0.75 mm V-2 1.5 mm V-0 2.0 mm V-0 2.0 mm V-0 0.75 mm V-2 1.5 mm V-0 0.75 mm V-2
Flammability
UL94
File No. E41797
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
Property
Test
Method
Test
Condition
Units
Type
100G-10
ABS
100G-20
100G-30
100G-10T1
ASG-10
ASG-20
ASG-30
ISO STANDARD
Melt Flow Rate
240C / 10 kg
ISO 1133
Tensile Strength
;
5 mm/min
Tensile Elongation at Break
ISO 527
Tensile Modulus
1 mm/min
Flexural Strength
ISO 178
2 mm/min
Flexural Modulus
Density
23C
ISO 1183
Glass Content
Toray Method
UL94
Flammability
File No. E41797
g/10min
24
16
13
45
32
22
16
kJ/m2
97
101
103
97
95
106
107
MPa
75
95
107
68
93
112
122
>2
>2
>2
>2
>2
>2
>2
MPa
5100
7300
9600
4200
6300
8800
11300
129
156
174
110
136
172
185
4600
6600
8700
4000
5800
7900
10200
kg/m3
1110
1180
1260
1110
1150
1220
1300
10
20
30
10
10
20
30
HB
HB
HB
HB
HB
HB
HB
MPa
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
Property
Test
Method
Test
Condition
Units
Type
Suffix
Heat Resistant
Super
High
Heat
Resistant
420Y
430Y
440Y
440Y
450Y
450Y
450Y
460Y
470Y
MH1
MH1
MH1
MH5
MH1
MH5
X10
MH1
MH1
High Heat
Blow
Molding
450Y
BM1
ISO STANDARD
Melt Flow Rate
220C / 10 kg
g/10min
ISO 1133
Tensile Strength
MPa
;
50 mm/min
Tensile Elongation at Break
ISO 527
%
Tensile Modulus
1 mm/min
MPa
Flexural Strength
ISO 178
2 mm/min
MPa
Flexural Modulus
Density
23C
ISO 1183
kg/m3
Glass Content
Toray Method
%
UL94
Flammability
File No. E41797
17
11
10
15
10
15
14
15
10
14
14
14
13
16
88
90
92
92
98
98
95
100
104
114
118
125
130
101
52
50
53
56
46
59
50
45
44
76
95
100
92
45
>8
>10
>10
>10
>10
>10
>10
>9
>9
>2
>2
>2
>2
>20
2850
2800
3100
2300
3100
2500
2250
2200
4700
6900
9500
6850
2500
80
83
83
89
69
93
79
75
66
128
155
185
150
74
2500
2620
2560
2830
2100
2830
2300
2130
2010
4550
6750
9350
6400
2200
1050
1050
1060
1060
1070
1070
1070
1070
1080
1150
1230
1310
1230
1060
10
20
30
20
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
PAINTING
Property
Test
Method
Units
Test
Condition
Type
Painting
100
100
100
100
440Y
450Y
MPM
MPF
MPJ
MPK
X50
X50
g/10min
18
15
30
35
14
12
kJ/m2
24
28
25
21
16
12
80
78
77
78
90
93
MPa
46
43
43
46
48
50
>10
>10
>10
>10
>6
>6
MPa
2300
2000
2200
2300
68
59
64
68
75
77
2100
1830
2100
2200
2400
2540
1030
1030
1040
1030
1050
1060
HB
HB
HB
HB
HB
HB
Suffix
ISO STANDARD
Melt Flow Rate
220C / 10 kg
ISO 1133
Tensile Strength
;
50 mm/min
Tensile Elongation at Break
ISO 527
Tensile Modulus
1 mm/min
Flexural Strength
ISO 178
2 mm/min
Flexural Modulus
Density
23C
ISO 1183
UL94
Flammability
File No. E41797
MPa
kg/m3
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
PLATING
Property
Test
Method
Test
Condition
Units
Type
Suffix
CHEMICAL RESISTANT
High Flow
High
High Flow Standard
Standard High Flow
Impact
315
325
X01
High
Rigidity
Flame
Retardant
335
AX05
AX05
AX05
AX84
MPL
X03
X08
X32
X01
ISO STANDARD
Melt Flow Rate
220C / 10 kg
ISO 1133
Tensile Strength
;
50 mm/min
Tensile Elongation at Break
ISO 527
Tensile Modulus
1 mm/min
Flexural Strength
ISO 178
2 mm/min
Flexural Modulus
Density
23C
ISO 1183
UL94
Flammability
File No. E41797
g/10min
24
15
24
17
29
24
35
kJ/m2
24
25
32
30
30
15
14
81
81
83
80
79
80
77
MPa
47
47
44
47
42
48
41
>10
>10
>6
>10
15
12
10
MPa
2500
2100
69
69
67
59
66
75
65
2300
2280
2330
1920
2010
2280
2100
1040
1040
1040
1040
1040
1050
1190
HB
HB
HB
HB
HB
HB
1.5 mm V-0
MPa
kg/m3
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
ALLOY
Property
Test
Method
Test
Condition
Units
Type
Glass Fiber
Glass Fiber Reinforced
Reinforced
AS//r-PET
ABS//PBT
ABS//r-PET
AS//r-PET
ABS//PBT
VX10G20
Suffix
RFX10
RJX2G-20
RJX2G-30
X01
ISO STANDARD
240C / 10 kg
Melt Flow Rate
ISO 1133
250C / 10 kg
36
25
13
25
kJ/m2
10
20
112
76
103
108
MPa
101
50
104
82
16
>2
MPa
8800
11900
158
68
150
210
6050
2000
7000
10400
kg/m3
1300
1110
1300
1380
20
20
30
HB
HB
HB
HB
g/10min
260C / 10 kg
Charpy Impact Strength (notched)
23C / 50 %RH
ISO 179/1eA
Tensile Strength
;
50 mm/min
Tensile Elongation at Break
ISO 527
Tensile Modulus
1 mm/min
Flexural Strength
ISO 178
2 mm/min
Flexural Modulus
Density
23C
ISO 1183
Glass Content
Toray Method
UL94
Flammability
File No. E41797
MPa
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
ALLOY
Property
Test
Method
Test
Condition
Units
Type
Non-Halogen Flame
Retardant r-PC// ABS
r-PC//ABS
PC//ABS
PX10
PX10
RNX82
RNX84
X06
X07
X01
X01
15
29
50
40
10
11
kJ/m2
48
60
24
43
116
101
85
84
MPa
59
57
61
62
>50
>50
>50
>30
MPa
2740
2600
87
84
93
92
2140
2180
2420
2400
kg/m3
1150
1120
1140
1180
HB
HB
0.75 mm V-2
3.00 mm V-2
1.5 mm V-0
Suffix
ISO STANDARD
240C / 10 kg
Melt Flow Rate
ISO 1133
250C / 10 kg
g/10min
260C / 2.16 kg
Charpy Impact Strength (notched)
23C / 50 %RH
ISO 179/1eA
Tensile Strength
;
50 mm/min
Tensile Elongation at Break
ISO 527
Tensile Modulus
1 mm/min
Flexural Strength
ISO 178
2 mm/min
Flexural Modulus
Density
23C
ISO 1183
Glass Content
Toray Method
Flammability
UL94
File No. E41797
MPa
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
Property
Test
Method
Test
Condition
Units
Middle Impact
High Impact
Super High
Impact
High Flow
Plating
Painting
Type
100N
100N
100N
700N
335N
100N
X01
322
X02
X02
X01
MPJ
Suffix
ISO STANDARD
Melt Flow Rate
220C / 10 kg
ISO 1133
Tensile Strength
;
50 mm/min
Tensile Elongation at Break
ISO 527
Tensile Modulus
1 mm/min
Flexural Strength
ISO 178
2 mm/min
Flexural Modulus
Density
23C
ISO 1183
Glossiness
Toray Method
Incident Angle 60o
Pellet YI
23C
JIS K7103
UL94
Flammability
File No. E41797
g/10min
25
13
22
52
26
40
kJ/m2
28
35
37
17
29
23
79
79
78
81
81
80
MPa
46
40
40
50
43
45
>8
> 10
>8
>8
> 10
>6
MPa
2400
1900
2000
2200
2400
2300
70
60
60
70
69
68
2200
1900
2050
2200
2400
2200
kg/m3
1040
1030
1030
1040
1040
1040
70
70
70
82
35 - 45
30 - 36
35 - 45
34 - 40
HB
HB
HB
HB
HB
HB
MPa
Note: The above values are typical data for the products under specific test conditions and not intended for use as limiting specifications.
Cylinder
Temperature
Mold Temperature
Transparent
80 ~ 90 C / 3 ~ 6 hrs
210 ~ 230 C
40 ~ 70C
Standard
80 ~ 90 C / 3 ~ 6 hrs
220 ~ 240 C
40 ~ 80C
80 ~ 90 C / 3 ~ 6 hrs
190 ~ 210 C
(884 X01)
40 ~ 80C
80 ~ 90 C / 3 ~ 6 hrs
210 ~ 230 C
40 ~ 80C
Heat Resistant
90 ~ 100 C / 3 ~ 6 hrs
210 ~ 230 C
40 ~ 80C
Fiber Reinforced
90 ~ 100 C / 3 ~ 6 hrs
240 ~ 260 C
40 ~ 80C
Specialty
80 ~ 90 C / 3 ~ 6 hrs
220 ~ 240 C
40 ~ 80C
95 ~ 105 C / 3 ~ 6 hrs
240 ~ 280 C
40 ~ 60C
95 ~ 105 C / 3 ~ 6 hrs
240 ~ 280 C
40 ~ 60C
Group
Flame Retardant
CAUTION
1 Refer to Material Safety Data Sheet for this product before use.
2 Traces of volatile gases may be released and irritate eyes, nose and throat. Use adequate local
exhaust ventilation during drying and molding.
3 Dispose of contents/container in accordance with local/region/national/international regulations.
4 Keep away from direct sunlight, rain and moisture.
5 This product are flammable. Keep away from heat and ignition source. Black smoke, carbon
monoxide, carbon dioxide, nitrogen oxides and etc maybe generated in the case combustion
of this product.
6 When using with medical, food, drink or toys for infant, consult Toray about the concrete
application and usage beforehand by all means.
7 Do not use for any internal implantation.
8 In as much as Toray Plastics (Malaysia) Sdn. Bhd. has no control over the use to which other
may put this material, it does not guarantee that the same result as those described herein will
be obtained.
9 This information contained in this data sheet represents the best information currently available
to us. The data and descriptions may be revised without notice.
10 TORAY MAKES NO REPRESENTATION OR WARRANTY, WHETHER EXPRESSED OR
IMPLIED, IN RESPECT OF FITNESS FOR A PARTICULAR PURPOSE AND SAFETY OF THIS
MATERIAL. USER WILL BE SOLELY RESPONSIBLE FOR ASCERTAINING THE
SUITABILITY OF THIS MATERIAL FOR THE PURPOSE, INCLUDING BUT NOT LIMITED TO,
MEDICAL APPLICATION OR FOOD CONTACT APPLICATION PURPOSES.