Beruflich Dokumente
Kultur Dokumente
pdf
Dec.25,2015
Ceramic Resonators
(CERALOCKr)
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
F**2&#.0-"3!21',2&'1!2*-%!-+.*7
5'2& -@
F -'12&# 30-.#,'0#!2'4#
|z{{GG -,2&##120'!2'-,-$2&#
1#-$#02',80"-313 12,!#1',
*#!20'!*," *#!20-,'! /3'.+#,2@
FFor+-0#"#2'*1A.*#1#0#$#r2o-ur
5# 1'2#'Mur21A..roc&$o0 -'
H&22.BGG555@+302@!-+G#,#3G13..-02G!-+.*',!#G0-&1J@
P16E.pdf
Dec.25,2015
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Contents
Product specications are as of December 2015.
CERALOCKr, CERALOCK(R) and "CERALOCK"
in this catalog are the trademarks of
Murata Manufacturing Co., Ltd.
Selection Guide
p2
Part Numbering
p3
p4
p6
p7
p11
p12
p17
p19
p22
p23
p27
p29
p31
p32
p37
p38
p40
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Selection Guide
Applications
Automotive
Consumer/Industrial
Tight Tolerance
Standard Tolerance
Tight Tolerance
Standard Tolerance
SMD
SMD
SMD
SMD
CSTCR_G15C
CSTCC_G_A
4.007.99MHz
2.003.99MHz
CSTCE_G15C
CSTCR_G_B
8.0013.99MHz
4.007.99MHz
CSTCE_V13C
CSTCE_G_A
14.0020.00MHz
8.0013.99MHz
CSTCR_G15L
CSTCR_GH5L
4.007.99MHz
CSTCE_G15L
CSTCE_GH5L
8.0013.99MHz
CSTCE_V13L
CSTCE_VH3L
14.0020.00MHz
CSTCC_G
2.003.99MHz
CSTCR_G
4.007.99MHz
CSTCE_G
8.0013.99MHz
CSTCE_V_C
CSTCW_X11
CSTCE_V
14.0020.00MHz
20.0148.00MHz
14.0020.00MHz
CSTCV_X_Q
CSTCW_X
20.0170.00MHz
20.0170.00MHz
CSACV_X_Q
CSACW_X
20.0170.00MHz
(Two Terminals)
20.0170.00MHz
(Two Terminals)
Leaded
CSTLS_G
3.4010.00MHz
CSTLS_X
16.0070.00MHz
Notice: "CERALOCKr for consumer" and "CERALOCKr for automotive" is different in the specication of Operating Temperature Range, Environmental Characteristics,
Physical Characteristics and so on. Please choose either "for consumer" or "for automotive" according to the required specication.
P16E.pdf
Dec.25,2015
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
o Part Numbering
CERALOCKr (MHz)
(Part Number)
CS
CE 16M0 V
5 6 7
*** -R0
8
9
7Load Capacity
1Product ID
Product ID
CS
Ceramic Resonators
2Frequency/Capacitance
Code
Load Capacity
5/6pF
10pF
15pF
Code
Frequency/Capacitance
22pF
30/33/39pF
47pF
8Individual Specication
3Structure/Size
Code
Structure/Size
LS
CC
CR/CE
CV
CW
Code
***
Individual Specication
Three-digit alphanumerics express
"Individual Specication."
9Packaging
4Nominal Center Frequency
Code
5Design
Code
Design
T/V
Packaging
-B0
Bulk
-A0
-R0/*R0
-R1
F"'*2.',%'1..*'#"2-*#"27.#,".*12'!2.',%2-!&'.27.#@
0.5%
0.3%
0.2%
0.1%
0.07%
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
0.60.05
1.10.1
4.1 max.
0.4 (ref.)
0.4 (ref.)
0.4 (ref.)
(3)
(2)
0.40.1
(1)
0.40.1
0.40.1
*: EIAJ Monthly
CSTCR_G15C
4.00-7.99MHz
Code
0.750.1
1.50.1
1.50.1
(in mm)
1.1 max.
1.30.15
0.100.10
3.20.15
0.40.1
0.10.1
0.700.10
3.0 max.
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.40.1 0.40.1 0.40.1
*: EIAJ Monthly
CSTCE_G15C
8.00-13.99MHz
Code
0.40.1
(in mm)
1.20.1 1.20.1
1.1 max.
3.20.15
0.100.10
0.40.1
0.10.1
3.0 max.
0.90.1
1.4 max.
0.20.2
Features
Applications
2.00.1
1.30.15
0.300.20
4.50.1
0.5 (ref.)
0.5 (ref.)
0.5 (ref.)
(3)
(2)
(1)
0.40.1 0.40.1 0.40.1
*: EIAJ Monthly
CSTCE_V13C
14.00-20.00MHz
Code
0.40.1
1.20.1 1.20.1
Operating
Temperature Range
(C)
Frequency
(MHz)
Initial
Frequency Tolerance
(%)
CSTCR_G15C
4.00 to 7.99
0.1
0.13
-40 to 125
CSTCE_G15C
8.00 to 13.99
0.1
0.13
-40 to 125
CSTCE_V13C
14.00 to 20.00
0.1
0.13
-40 to 125
Part Number
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
(in mm)
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
VDD
5pF
To Frequency Counter
Rf
1M
Rd
(1)
(3)
C1
C2
(2)
1.1
0.4
1.1
CSTCE_G15C
0.4
0.8
0.4
0.8
0.4
2.6
1.90 ~ 2.10
0.4
1.2
1.5
1.5
1.2
Land Pattern
Land Pattern
(in mm)
(in mm)
0.4
0.8
0.8
0.4
+0.1
1.90 ~ 2.10
0.4
CSTCR_G15C
+0.2
1.2
1.2
Land Pattern
-0.1
-0.2
-60
(in mm)
-40
-20
CSTCE_G15C
+0.2
CSTCE_V13C
+0.2
+0.1
+0.1
-0.1
-0.2
-60
-40
-20
-0.1
-0.2
-60
-40
-20
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
TMP92CD54IF (Toshiba)
MB90F387 (Fujitsu)
16-bit Microcomputer
Vcc3=3.3V
16-bit Microcomputer
Vcc5=5.0V
Vcc=5.0V
H2
0.1F
H1
IC : TMP92CD54IF
74
72
IC : MB90F387
L
27
H1: 36, 68, 86
H2: 2, 4, 15, 40, 50, 61, 75
L: 1, 3, 13, 38, 51, 63, 73, 88
CERALOCKr
V1
V2
C1
C2
L
H: 1, 2, 21, 22, 24
L: 20, 23, 25, 48
V2
C1
C2
CERALOCKr: CSTCE8M00G15Cpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
8-bit Microcomputer
Vdd=5.0V
26
0.1F
V1
CERALOCKr: CSTCE10M0G15Cpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
MC68HC908AZ60AVFU (Freescale)
28
CERALOCKr
8-bit Microcomputer
Vdd=5.0V
60
EVALUATION BOARD
IC : MC68HC908AZ60AVFU
59
58
IC : ST72F561 (HS)
GND
1M
CERALOCKr
V1
V2
C1
CERALOCKr
V1
V2
C1
CERALOCKr: CSTCE16M0V13Cpp-R0
C1=15pF (Typ.)
C2=15pF (Typ.)
C2
PD70F3283YGC (Renesas)
C2
CERALOCKr: CSTCE8M00G15App-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
M30842MCT-XXXGP (Renesas)
16-bit Microcomputer
32-bit Microcomputer
Vdd=3.3V
Vcc=5.0V
10k
14
IC : PD70F3283YGC
13
10 L
4.7F
CERALOCKr
IC : M30842MCT-XXXGP (High*)
12
V1
V2
C1
C2
19
22
H: 1, 5, 9, 34, 70
L: 2, 8, 11, 15, 33, 69
CERALOCKr: CSTCE10M0G15Cpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
20
CERALOCKr
V1
V2
C1
C2
CERALOCKr: CSTCE8M00G15Cpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
0.50.05
0.30.3
6.6 max.
0.45
(Ref.)
0.45
(Ref.)
0.45
(Ref.)
(3)
(2)
(1)
1.20.2
1.40.2
1.20.2
t : 1.750.05
(2.002.99MHz)
t : 1.550.05
(3.00MHz)
CSTCC_G_A
2.00-3.99MHz
Features
*: EIAJ code
1.10.1 2.50.1
(in mm)
2.50.1
*
(3)
0.20.2
(2)
0.40.05
(1)
0.4 (ref.)
0.80.1
CSTCR_G_B
4.00-7.99MHz
1.150.05
4.1 max.
0.4 (ref.)
0.4 (ref.)
0.80.1
1.4 max.
2.00.1
0.30.2
4.50.1
Applications
* : EIAJ Monthly
Code
0.80.1
0.40.1
0.40.1
0.750.1 1.50.1
1.50.1
0.40.1
(in mm)
1.1 max.
1.30.15
0.100.10
3.20.15
0.40.1
0.10.1
0.700.10
3.0 max.
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.40.1 0.40.1 0.40.1
CSTCE_G_A
8.00-13.99MHz
0.40.1
(in mm)
1.20.1 1.20.1
1.1 max.
3.20.15
0.100.10
0.40.1
0.10.1
3.0 max.
0.90.1
3.00.2
1.30.15
0.450.3
7.20.2
0.5 (ref.)
0.5 (ref.)
0.5 (ref.)
(3)
(2)
(1)
0.40.1 0.40.1 0.40.1
*: EIAJ Monthly
CSTCE_V_C
14.00-20.00MHz
Code
0.40.1
1.20.1 1.20.1
(in mm)
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
(0.5)
(3)
(0.5)
(2)
(0.5)
(1)
(0.7)
(3)
Thickness varies
with frequency.
*: EIAJ Monthly Code
CSACV_X_Q
20.01-70.00MHz
1.60.2 1.60.2
1.850.3
1.30.1
3.10.2
3.70.2
1.30.1
3.10.2
3.70.2
(0.9)
(2)
(0.7)
(1)
CSTCV_X_Q
20.01-70.00MHz
1.60.2 1.60.2
1.850.3
(in mm)
(in mm)
Part Number
Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Operating
Temperature Range
(C)
CSTCC_G_A
2.00 to 3.99
0.5
-40 to 125
CSTCR_G_B
4.00 to 7.99
0.5
0.15
-40 to 125
CSTCE_G_A
8.00 to 13.99
0.5
0.2
-40 to 125
CSTCE_V_C
14.00 to 20.00
0.5
0.15
-40 to 125
CSACV_X_Q
20.01 to 70.00
0.5
0.3
-40 to 125
CSTCV_X_Q
20.01 to 70.00
0.5
0.3
-40 to 125
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
CSTCE_G_A/CSTCE_V_C/CSTCR_G_B/CSTCV_X_Q
VDD
VDD
5pF
To Frequency Counter
Rf
To Frequency Counter
Rf
1M
Rd
Rd
(1)
(3)
(1)
C1
C1 C2
(2)
VDD
0.01F
Rf
CL1
C2
(2)
CSACV_X_Q
22F
+
(3)
To Frequency Counter
CL2
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
CSTCR_G_B
3.8~4.4
2.6
1.6
0.4
1.5
2.5
0.4
1.5
0.4
2.5
Land Pattern
Land Pattern
(in mm)
(in mm)
CSTCE_G_A
0.4
0.8
0.4
0.4
0.8
0.4
0.8
0.4
1.90 ~ 2.10
0.8
1.90 ~ 2.10
0.4
CSTCE_V_C
(* This Land Pattern is not common to CSTCE_V.)
1.2
1.2
1.2
1.2
Land Pattern
Land Pattern
(in mm)
(in mm)
CSACV_X_Q
1.0
0.5
3.10.2
1.0
0.5
3.10.2
1.0
0.5
1.0
0.5
CSTCV_X_Q
1.6
1.6
1.6
Land Pattern
(in mm)
1.6
Land Pattern
(in mm)
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
CSTCR_G_B
+0.2
+0.2
+0.1
+0.1
-0.1
-0.2
-60
-40
-20
-0.1
-0.2
-60
-40
-20
CSTCE_G_A
+0.2
CSTCE_V_C
+0.2
+0.1
+0.1
-0.1
-0.2
-60
-40
-20
-0.1
-0.2
-60
-40
-20
CSTCV_X_Q
CSACV_X_Q
+0.2
+0.2
+0.1
+0.1
-0.1
-0.2
-60
10
-40
-20
-0.1
-0.2
-60
-40
-20
+80
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
M30260F8AGP (Renesas)
8-bit Microcomputer
Vdd=5.0V
V'dd=7.0V
16-bit Microcomputer
Vcc=5.0V
10k
IC : PD78F9222MC-5A4
2
IC : M30260F8AGP (High*)
23
24
L
H: 11, 46, 47, 48
L: 4, 9, 44
*High: XIN-XOUT Drive Capacity Select Bit
CERALOCKr
CERALOCKr
V1
H: 5, 20
L: 1
V2
C1
C2
V1
V2
C1
CERALOCKr: CSTCR6M00G55B-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
MB90F347D (Fujitsu)
C2
CERALOCKr: CSTCE10M0G55A-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
MC68HC908AZ60AVFU (Freescale)
16-bit Microcomputer
Vcc=5.0V
8-bit Microcomputer
Vdd=5.0V
H
EVALUATION BOARD
IC : MC68HC908AZ60AVFU
IC : MB90F347D
93
92
V1
V2
C1
59
CERALOCKr
C2
V1
C1
8-bit Microcomputer
8-bit Microcomputer
Vdd=5.0V
H
IC : PIC12F675-I/P(HS)
IC : ST72F324J6T3 (MS)
41
CERALOCKr
V1
V2
C1
C2
CERALOCKr: CSTCE16M0V53C-R0
C1=15pF (Typ.)
C2=15pF (Typ.)
C2
Vdd=5.0V
42
GND
V2
CERALOCKr: CSTCE8M00G55A-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
58
1M
CERALOCKr
L
H: 13, 21, 32, 43
L: 14, 22, 33, 39, 40
CERALOCKr: CSTCR4M00G55B-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
1M
CERALOCKr
V1
V2
C1
C2
H: 1
L: 4, 8
CERALOCKr: CSTCE8M00G52A-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
11
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Solder
60 to 120s
220C min.
30 to 60s
1s max.
5s max.
Heating
Peak Temperature
150 to 180C
Peak
Temperature (C)
Flux
260
245
220
Heating
(220C min.)
180
150
Pre-heating
(150 to 180C)
60 to 120s
Gradual
Cooling
30 to 60s
350C max.
30W max.
3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
12
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
2. Wash
(1) Cleaning Solvents
HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care FRW
(2) Temperature Difference : dT *1
dT<
=60C (dT=Component-solvent)
*1 ex. If the component is immersed at +90C into
cleaning solvent at +60C, then dT=30C.
(3) Conditions
(a) Ultrasonic Wash
1 minute max. in above solvent at +60C max.
(Frequency: 28kHz, Output: 20W/l)
(4) Drying
5 minutes max. by blowing air at +80C max.
(5) Other
(a) Total washing time should be within 10 minutes.
(b) The component may be damaged if it is washed with
chlorine, petroleum, or alkali cleaning solvent.
3. Coating
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to conrm
stable electrical characteristics are maintained.
13
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Flux
Solder
60 to 120s
220C min.
30 to 60s
1s max.
5s max.
Heating
Peak Temperature
150 to 180C
Temperature (C)
1. Soldering
(1) Reow soldering
Please mount the component on a circuit board by reow
soldering. Flow soldering is not acceptable.
Recommendable Flux and Solder
Peak
260
245
220
Heating
(220C min.)
180
150
Pre-heating
(150 to 180C)
60 to 120s
Gradual
Cooling
30 to 60s
350C max.
30W max.
3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
(3) Other
Do not reuse components removed from a circuit board
after soldering.
(4) Conditions for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
2. Wash
(1) Cleaning Solvents
HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care FRW
(2) Temperature Difference : dT *1
dT<
=60C (dT=Component-solvent)
*1 ex. If the component is immersed at +90C into
cleaning solvent at +60C, then dT=30C.
14
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
(3) Conditions
(a) Ultrasonic Wash
1 minute max. in above solvent at +60C max.
(Frequency: 28kHz, Output: 20W/l)
(4) Drying
5 minutes max. by blowing air at +80C max.
(5) Other
(a) Total washing time should be within 10 minutes.
(b) The component may be damaged if it is washed with
chlorine, petroleum, or alkali cleaning solvent.
3. Coating
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to conrm
stable electrical characteristics are maintained.
15
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
16
P16E.pdf
Dec.25,2015
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Reel Dimensions
CSTCC_G_A
Part Number
2,000
6,000
500
CSTCR_G_B
3,000
9,000
500
CSTCR_G15C
3,000
9,000
500
CSTCE_G_A
3,000
9,000
500
CSTCE_G15C
3,000
9,000
500
CSTCE_V_C
3,000
9,000
500
CSTCE_V13C
3,000
9,000
500
CSTCV_X_Q
2,000
6,000
500
CSACV_X_Q
2,000
6,000
500
a
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Dimensions of Reel
a
Trailer
160-190
Leader
Empty Components
Empty Components
Empty
160 min.
(1800
1.5)
(1800
1.5)
400-560
13.00.2
2.00.5
13.0
Leader
Cover Film
Trailer
160-190
Cover Film
+1.0
0
9.0
17.01.0
Empty
160 min.
400-560
13.00.2
2.00.5
+1.0
0
13.01.0
(in mm)
Dimensions of Taping
Direction of Feed
(in mm)
(3)
10
Direction of Feed
8.00.2
(1.30 max.)
+0.2
4.00.1
1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
3.50.05
+0.10
3.40 -0.05
(3)(2)(1)
(5.2)
12.00.2
(1.85 max.)
0.30.05
(3)
1.250.05
4.00.1
+0.1
1.5 -0.0
2.00.05
0.250.05
0.900.10
+0.1
1.5-0
2.20.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10
4.00.1
5.50.05
(9.5)
(3)(2)(1)
2.00.05
4.70.1
+0.1
1.5 -0
1.750.1
CSTCE_G15C
1.750.1
CSTCR_G15C
4.00.1
(in mm)
17
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Dimensions of Taping
(in mm)
(in mm)
(in mm)
t2 *2
t1 *1
0.30.1
12.00.2
1.750.1
5.50.1
4.10.1
(3)
(2)
(1)
(9.5)
Cover film peel strength force 0.1 to 0.7N 4.00.1 +0.1 1.5+0.2
0.0
3.35 0.05
Cover film peel speed 300mm/min.
Cover Film
(3)
10
Direction of Feed
*1, *2: Dimensions vary with product thickness of CERALOCKr.
Thickness of CERALOCKr 1.501.40 1.301.20 1.101.00
*1
t1
1.650.1 1.450.1 1.20.1
*2
t2
2.0 max. 1.8 max. 1.5 max. (in mm)
18
t2 *2
12.00.2
5.50.05
t1 *1
0.30.05
1.750.1
8.00.2
t2 *2
t1 *1
0.30.1
5.50.1
1.750.1
Direction of Feed
*1, *2: Dimensions vary with product thickness of CERALOCKr.
Thickness of CERALOCKr 1.501.40 1.301.20 1.101.00
*1
t1
1.650.1 1.450.1 1.20.1
*2
t2
2.0 max. 1.8 max. 1.5 max. (in mm)
CSACV_X_Q
+0.1
1.5 0.0
12.00.2
(9.5)
(1.40 max.)
1.100.05
0.250.05
Direction of Feed
+0.1
1.5 0.0
Cover film peel strength force 0.1 to 0.7N 4.00.1 +0.1 1.5+0.2
0.0
3.35 0.05
Cover film peel speed 300mm/min.
Cover Film
(3)
10
+0.1
(3)
(3)
(2)
(1)
3.50.05
2.00.1
8.00.2
3.450.1
(3)(2)(1)
(5.2)
4.00.1
4.10.1
1.750.1
CSTCV_X_Q
1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
10
2.00.1
(in mm)
Direction of Feed
CSTCE_V_C
Dimensions of Carrier Tape
4.00.1
+0.1
1.5 -0.0
2.00.05
4.00.1
3.50.05
10
(1.30 max.)
1.250.05
(1.85 max.)
0.30.05
Direction of Feed
(3)
0.250.05
0.900.10
+0.2
4.00.1
1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
4.00.1
(3)
+0.1
1.5 -0.0
2.00.05
(3)(2)(1)
(5.2)
12.00.2
5.50.05
4.70.1
(3)(2)(1)
(9.5)
+0.1
1.5 -0
2.20.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10
4.00.1
+0.10
3.40 -0.05
1.750.1
CSTCE_G_A
+0.1
1.5 -0
4.00.1
(3)
Direction of Feed
*1, *2: Dimensions vary with frequency range of CERALOCKr.
2.002.99MHz 3.003.99MHz
Frequency Range
1.850.05
1.650.05
t1
*1
2.45 max.
2.25 max.
t2
*2
(in mm)
CSTCR_G_B
2.00.05
7.60.1
(9.5)
(1.40 max.)
0.250.05
1.100.05
(3)
Direction of Feed
4.00.1
1.550.05
4.00.1
1.5 +0.3
-0.0
Cover film peel strength force 0.1 to 0.7N 3.30.1
Cover film peel speed 300mm/min.
Cover Film
10
+0.10
2.00.05
3.50.05
8.00.2
3.450.1
(3)(2)(1)
(5.2)
4.00.1
+0.1
1.0 -0.0
4.00.1
1.750.1
CSTCC_G_A
1.750.1
CSTCE_V13C
Dimensions of Carrier Tape
4.00.1
+0.1
1.5 -0.0
2.00.05
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
0.300.20
1.4 max.
4.50.1
*
0.20.2
0.60.05
1.10.1
4.1 max.
0.4 (ref.)
0.4 (ref.)
0.4 (ref.)
(3)
(2)
0.40.1
(1)
0.40.1
0.40.1
*: EIAJ Monthly
CSTCR_G15L/CSTCR_GH5L
4.00-7.99MHz
Code
0.750.1
1.50.1
1.50.1
(in mm)
1.1 max.
0.100.10
3.20.15
1.30.15
Features
0.40.1
0.10.1
Applications
1. Clock oscillators for USB (full-speed) controller ICs
2. Audio equipment and musical instruments, etc.
3. Other applications for replacement of Crystal units/
Oscillators
0.700.10
3.0 max.
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.40.1 0.40.1 0.40.1
*: EIAJ Monthly
CSTCE_G15L/CSTCE_GH5L
8.00-13.99MHz
Code
0.40.1
2.50.2
0.40.1
0.10.1
3.0 max.
0.05 +0.10
- 0.05
0.90.1
0.5 (ref.)
1.4 max.
2.00.2
1.1 max.
1.30.15
0.100.10
3.20.15
0.5 (ref.)
(in mm)
1.20.1 1.20.1
0.5 (ref.)
(0.5)
(3)
(0.5)
(2)
(0.5)
(1)
+0.3
+0.3
0.4 +0.3
- 0.2 0.4 - 0.2 0.4 - 0.2
0.50.2 0.50.2 0.50.2
(3)
(2)
(1)
0.40.1 0.40.1 0.40.1
*: EIAJ Monthly
CSTCE_V13L/CSTCE_VH3L
14.00-20.00MHz
0.05 +0.10
- 0.05
Code
Thickness varies
with frequency and
built-in capacitance.
* : EIAJ code
CSTCW_X11
20.01-48.00MHz
1.00.2 1.00.2
0.40.1
Part Number
1.20.1 1.20.1
Frequency
(MHz)
(in mm)
(in mm)
1.250.2
Initial
Frequency Tolerance
(%)
Operating
Temperature Range
(C)
CSTCR_G15L
4.00 to 7.99
0.1
0.08
0 to 70
CSTCR_GH5L
4.00 to 7.99
0.07
0.08
0 to 70
CSTCE_G15L
8.00 to 13.99
0.1
0.08
0 to 70
CSTCE_GH5L
8.00 to 13.99
0.07
0.08
0 to 70
CSTCE_V13L
14.00 to 20.00
0.1
0.08
0 to 70
CSTCE_VH3L
14.00 to 20.00
0.07
0.08
0 to 70
CSTCW_X11
20.01 to 48.00
0.1
0.1
0 to 70
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
19
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
CSTCR_G15L/CSTCR_GH5L/CSTCE_G15L/
CSTCE_GH5L/CSTCE_V13L/CSTCE_VH3L
VDD
VDD
5pF
To Frequency Counter
Rf
To Frequency Counter
Rf
1M
Rd
(1)
Rd
(1)
(3)
C1
(3)
C2
C1 C2
(2)
(2)
CSTCR_G15L/CSTCR_GH5L
(* This Land Pattern is not common to CSTCR_G.)
0.4
1.1
0.4
1.1
0.4
0.8
0.4
0.8
0.4
2.6
1.90 ~ 2.10
0.4
1.2
1.2
1.5
1.5
Land Pattern
Land Pattern
(in mm)
(in mm)
CSTCW_X11
CSTCE_V13L/CSTCE_VH3L
(* This Land Pattern is not common to CSTCE_V.)
0.4
0.8
0.4
0.8
1.2
1.2
0.8
0.3
2.0
1.90 ~ 2.10
0.4
Land Pattern
1.0
1.0
Land Pattern
(in mm)
(in mm)
20
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
+0.1
+0.1
-0.1
-0.2
-60
CSTCE_G15L/CSTCE_GH5L
+0.2
+0.2
-40
-20
-0.1
-0.2
-60
-40
-20
CSTCE_V13L/CSTCE_VH3L
CSTCW_X11
+0.2
+0.2
+0.1
+0.1
-0.1
-0.2
-60
-40
-20
-0.1
-0.2
-40
-20
+20
+40
Temperature (C)
+60
+80
+100
21
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
MN102HF74GHL (Panasonic)
USB Transceiver
Vset=3.3V
16-bit Microcontroller
Vdd=3.3V
Fout
H
82
EVALUATION BOARD
IC : M66291GP
14
13
1M
CERALOCKr
IC : MN102HF74GHL
GND
23
V2
C1
24
CERALOCKr
220
V1
18
V1
C1
CERALOCKr: CSTCR6M00G15ppp-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
C2
LC87F1964A (Sanyo)
V2
C2
CERALOCKr: CSTCE12M0G15Lpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
8-bit Microcontroller
Vdd=5.0V
10k
H
H H1
IC : TUSB2046B
IC : LC87F1964A
6
L1 L
10k
470
CERALOCKr
V1
V2
C1
H: 8, 19, 39
L: 5, 20, 40
H1: 31, 33
L1: 29, 30, 32, 34~36
CERALOCKr: CSTCE12M0G15Lpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
C2
ISP1181BDGG (Philips)
USB Controller
Vset=3.3V
H
EVALUATION BOARD
IC : ISP1181BDGG
48
47
GND
CERALOCKr
V1
22
C1
C2
V2
CERALOCKr: CSTCR6M00G15ppp-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
30
29
1M
CERALOCKr
V1
V2
C1
C2
GND
H: 3, 25
L: 7, 28
CERALOCKr: CSTCR6M00G15ppp-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
0.450.3
0.50.05
0.30.3
6.6 max.
0.45
(Ref.)
0.45
(Ref.)
0.45
(Ref.)
(3)
(2)
(1)
1.20.2
1.40.2
1.20.2
t : 1.750.05
(2.002.99MHz)
t : 1.550.05
(3.00MHz)
CSTCC_G
2.00-3.99MHz
*: EIAJ code
1.10.1 2.50.1
(in mm)
2.50.1
*
(3)
0.20.2
Applications
(2)
0.40.05
(1)
0.4 (ref.)
0.4 (ref.)
0.80.1
CSTCR_G
4.00-7.99MHz
1.150.05
4.1 max.
0.4 (ref.)
0.80.1
* : EIAJ Monthly
Code
0.80.1
0.40.1
0.40.1
0.750.1 1.50.1
1.50.1
0.40.1
(in mm)
1.1 max.
1.30.15
3.20.15
0.100.10
0.40.1
0.10.1
3.0 max.
0.700.10
1.4 max.
0.30.2
4.50.1
2.00.1
Features
2.1 max.
7.20.2
0.50 (ref.)
0.50 (ref.)
0.50 (ref.)
(3)
(2)
(1)
0.40.1 0.40.1 0.40.1
CSTCE_G/CSTCE_G_Z
8.00-13.99MHz
0.40.1
2.00.2
1.1 max.
0.40.1
0.10.1
3.0 max.
+0.10
0.90.1
(2)
(0.5)
(0.5)
0.4
+0.3
- 0.2
0.50.2
(1)
+0.10
0.05 - 0.05
0.05 - 0.05
0.62 (ref.)
0.45 (ref.)
(3)
1.2 max.
2.50.2
1.30.15
0.100.10
3.20.15
0.62 (ref.)
(in mm)
1.20.1 1.20.1
0.4
+0.3
- 0.2
0.50.2
CSTCE_V
14.00-20.00MHz
Thickness varies
with frequency.
CSACW_X
20.01-70.00MHz
0.650.1 0.950.1 0.950.1
(in mm)
* : EIAJ code
1.00.2 1.00.2
1.250.2
(in mm)
23
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
1.4 max.
0.05 +0.10
- 0.05
(0.5)
(2)
(0.5)
(3)
(0.5)
(1)
0.05 +0.10
- 0.05
+0.3
+0.3
0.4 +0.3
- 0.2 0.4 - 0.2 0.4 - 0.2
0.50.2 0.50.2 0.50.2
Thickness varies
with frequency and
built-in capacitance.
* : EIAJ code
CSTCW_X
20.01-70.00MHz
1.00.2 1.00.2
(in mm)
1.250.2
Frequency
(MHz)
Initial
Frequency Tolerance
(%)
Operating
Temperature Range
(C)
2.00 to 3.99
0.5
-20 to 80
CSTCR_G
4.00 to 7.99
0.5
0.2
-20 to 80
CSTCE_G
8.00 to 13.99
0.5
0.2
-20 to 80
CSTCE_G_Z
8.00 to 13.99
0.5
0.2
-40 to 125
CSTCE_V
14.00 to 20.00
0.5
0.3
-20 to 80
CSACW_X
20.01 to 70.00
0.5
0.2
-20 to 80
CSTCW_X
20.01 to 70.00
0.5
0.2
-20 to 80
Part Number
CSTCC_G
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
CSTCC_G/CSTCW_X
VDD
VDD
5pF
To Frequency Counter
Rf
To Frequency Counter
Rf
1M
Rd
(1)
Rd
(1)
(3)
C1
C2
C1 C2
(2)
(2)
CSACW_X
VDD
To Frequency Counter
Rf
Rd
CL1
24
(3)
CL2
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
CSTCC_G
3.8~4.4
2.6
1.6
0.4
1.5
2.5
0.4
1.5
0.4
2.5
Land Pattern
Land Pattern
(in mm)
(in mm)
CSTCE_V
(* This Land Pattern is not common to
CSTCE_V13C, CSTCE_V_C, CSTCE_V13L, CSTCE_VH3L.)
CSTCE_G/CSTCE_G_Z
0.8
0.4
0.8
0.4
1.6
1.90 ~ 2.10
0.4
0.95
1.2
1.2
0.95
Land Pattern
Land Pattern
(in mm)
(in mm)
CSACW_X
0.5
2.0
0.8
0.3
0.8
0.3
2.0
0.8
0.3
0.8
0.3
0.5
CSTCW_X
2.0
1.0
1.0
Land Pattern
Land Pattern
(in mm)
(in mm)
25
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
CSTCR_G
+0.2
+0.2
+0.1
+0.1
-0.1
-0.2
-40
-20
+20
+40
Temperature (C)
+60
+80
-0.1
-0.2
-60
+100
-40
-20
CSTCE_G/CSTCE_G_Z
+0.2
+0.1
+0.1
-0.1
-0.2
-60
-40
-20
-0.1
-0.2
-60
-40
-20
CSACW_X
+0.2
+0.1
26
CSTCW_X
+0.2
+0.1
-0.1
-0.2
-40
CSTCE_V
+0.2
-20
+20
+40
Temperature (C)
+60
+80
+100
-0.1
-0.2
-40
-20
+20
+40
Temperature (C)
+60
+80
+100
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
TMP19A43FDXBG (Toshiba)
8-bit Microcomputer
Vdd=5.0V
32-bit Microcomputer
Vcc=1.5V
Vcc'=2.5V
Vcc''=3.3V
10k
H
6
EVALUATION BOARD
IC : TMP19A43FDXBG
IC : PD78F0533GB
11
A14
10
12 L
0.1F
CERALOCKr
V1
H: 15, 16, 47
L: 9, 13, 14, 48
V2
C1
C2
A15
GND
CERALOCKr
V1
C1
CERALOCKr: CSTCR4M00G55-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
MN103SFC2D (Panasonic)
Xin: A14
Xout: A15
V2
C2
CERALOCKr: CSTCE10M0G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
MB95F128H (Fujitsu)
32-bit Microcomputer
Vdd=5.0V
8-bit Microcomputer
Vcc=5.0V
4
H
H
IC : MN103SFC2D
14
13
CERALOCKr
V1
IC : MB95F128H
Vdd2 L
10F
H: 9, 17, 34
L: 7, 15, 36
Vdd2: 16, 38
V2
C1
56
C2
V1
C1
8-bit Microcomputer
H
EVALUATION BOARD
IC : PIC16F716-I/SO(HS)
GND
11
C2
10
CERALOCKr
V2
C1
CERALOCKr: CSTCE8M00G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
IC : HD64F36077GH
1M
CERALOCKr
V1
C2
16-bit Microcomputer
Vcc=5.0V
15
H: 3, 28, 51, 79
L: 4, 29, 54, 57
HD64F36077GH (Renesas)
Vdd=5.0V
16
V2
CERALOCKr: CSTCR5M00G55Z-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
PIC16F716-I/SO (Microchip)
55
CERALOCKr
V1
CERALOCKr: CSTCE12M0G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
6
0.1F
V2
C1
C2
L
H: 3, 7, 12
L: 8, 9
CERALOCKr: CSTCE8M00G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
27
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
PD70F3215HYGC (Renesas)
ATmega128 (Atmel)
32-bit Microcomputer
8-bit Microcomputer
Vdd=5.0V
Vcc=5.0V
14
IC : PD70F3215HYGC
12
13
CERALOCKr
V1
10
10F
IC : ATmega128
L
23
CERALOCKr
H: 1, 5, 9, 34, 70
L: 2, 8, 11, 33, 69
V2
C1
24
C2
V1
C1
CERALOCKr: CSTCR5M00G55-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
H: 21, 52, 64
L: 22, 53, 63
V2
C2
CERALOCKr: CSTCE8M00G52-R0
C1=10pF (Typ.)
C2=10pF (Typ.)
8-bit Microcomputer
32-bit Microcomputer
Vdd=5.0V
Vdd1=1.8V
Vdd2=3.3V
H1
H2
4
18
IC : ST7FLITE29F2B6
15
14
IC : TMS320F2810PBKA
L
58
V1
V2
C1
28
C2
H: 17
L: 16
CERALOCKr: CSTCE16M0V53-R0
C1=15pF (Typ.)
C2=15pF (Typ.)
57
100
CERALOCKr
CERALOCKr
V1
V2
C1
C2
H1: 20, 29, 42, 56, 63, 74, 82, 94, 99,
100, 102, 110, 114
H2: 1, 13, 14, 25, 49, 52, 83, 104, 118
L: 12, 15, 17, 26, 30, 39, 53, 59, 62, 73,
88, 95, 103, 109, 115, 117, 128
CERALOCKr: CSTCE15M0V53-R0
C1=15pF (Typ.)
C2=15pF (Typ.)
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
3.01.0
3.50.3
***
5.50.5
8.01.0
(3)
(2)
0.480.05
7.0 (Ref.)
(1)
CSTLS_G
3.40-10.00MHz
Features
2.50.2
2.50.2
T *1
3.50.3
6.50.5
5.51.0
(3)
(2)
(1)
Applications
CSTLS_X
16.00-70.00MHz
1. DTMF generators
2. Clock oscillators for microcomputers
3. Remote control units
4. Automated office equipment
Frequency
(MHz)
Part Number
2.50.2 2.50.2
0.480.05
T *1 : 3.51.0 (16.0032.99MHz)
3.01.0 (33.0070.00MHz)
* : EIAJ Monthly Code
(in mm)
Initial
Frequency Tolerance
(%)
Operating
Temperature Range
(C)
CSTLS_G
3.40 to 10.00
0.5
-20 to 80
CSTLS_X
16.00 to 70.00
0.5
0.2
-20 to 80
Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
The order quantity should be an integral multiple of the "Minimum Quantity" shown on the packaging page.
To Frequency Counter
Rf
Rd
(1)
(3)
C1 C2
(2)
29
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
CSTLS_X
+0.25
0
40
0.25
0.50
30
0.3
40
80
120
Temperature (C)
+0.50
0.2
0.1
0.0
50
0.1
0.2
0.3
30
10
10
30
50
70
90
110
130
Temperature (C)
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
LC87F5G32A (Sanyo)
8-bit Microcomputer
8-bit Microcomputer
Vcc=5.0V
Vdd=5.0V
510
47000pF
10k
H
25
26
H'
M38235G6HP
28
29
C1
C2
V2
100pF
2
IC : LC87F5G32A
L
6
H: 71
L: 30, 73
CERALOCKr: CSTLS8M00G53-B0
C1=15pF (Typ.)
C2=15pF (Typ.)
7
2.2kF
CERALOCKr
CERALOCKr
V1
10k
H
V1
L'
10kF
V2
C1
C2
L
H: 8, 19, 39
L: 5, 20, 40
H': 29, 31, 35
L': 30, 32~34, 36
CERALOCKr: CSTLS5M00G53-B0
C1=15pF (Typ.)
C2=15pF (Typ.)
31
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Solder
60 to 120s
220C min.
30 to 60s
1s max.
5s max.
Heating
Peak Temperature
150 to 180C
Peak
Temperature (C)
Flux
260
245
220
Heating
(220C min.)
180
150
Pre-heating
(150 to 180C)
60 to 120s
Gradual
Cooling
30 to 60s
350C max.
30W max.
3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
32
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
2. Wash
Some series do not withstand washing.
Please check the list at right before use.
Series
Wash
Not Available
Available
(4) Drying
5 minutes max. by blowing air at +80C max.
(5) Other
(a) Total washing time should be within 10 minutes.
(b) The component may be damaged if it is washed with
chlorine, petroleum, or alkali cleaning solvent.
3. Coating
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to conrm
stable electrical characteristics are maintained.
33
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Flux
Solder
60 to 120s
220C min.
30 to 60s
1s max.
5s max.
Pre-heating
Heating
Peak Temperature
Temperature (C)
1. Soldering
(1) Reow soldering
Please mount the component on a circuit board by reow
soldering. Flow soldering is not acceptable.
Recommendable Flux and Solder
Peak
260
245
220
Heating
(220C min.)
180
150
Pre-heating
(150 to 180C)
60 to 120s
Gradual
Cooling
30 to 60s
350C max.
30W max.
3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
(4) Other
Do not reuse components removed from a circuit board
after soldering.
(5) Conditions for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
2. Washing / Coating
Conformal coating or washing of the component is not
acceptable, because it is not hermetically sealed.
Please contact us if you need a washable component.
Continued on the following page.
34
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Flux
Solder
60 to 120s
220C min.
30 to 60s
1s max.
5s max.
Pre-heating
Heating
Peak Temperature
Temperature (C)
1. Soldering
(1) Reow soldering
Please mount the component on a circuit board by reow
soldering. Flow soldering is not acceptable.
Recommendable Flux and Solder
Peak
260
245
220
Heating
(220C min.)
180
150
Pre-heating
(150 to 180C)
60 to 120s
Gradual
Cooling
30 to 60s
350C max.
30W max.
3mm max.
5s max. at one terminal
Sn-3.0Ag-0.5Cu
(3) Other
Do not reuse components removed from a circuit board
after soldering.
(4) Conditions for Placement Machines
The component is recommended with placement
machines that employ optical placement capabilities.
The component may be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines that
utilize mechanical positioning. Please contact Murata for
details beforehand.
2. Washing / Coating
Conformal coating or washing of the component is not
acceptable, because it is not hermetically sealed.
Please contact us if you need a washable component.
35
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
36
P16E.pdf
Dec.25,2015
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Dec.25,2015
Rating
The component may be damaged if excessive mechanical
stress is applied.
Handling
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
37
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Bulk
Reel Dimensions
CSTCC_G
Part Number
2,000
6,000
500
CSTCR_G
3,000
9,000
500
CSTCR_G15L
3,000
9,000
500
CSTCR_GH5L
3,000
9,000
500
CSTCE_G
3,000
9,000
500
CSTCE_G15L
3,000
9,000
500
CSTCE_GH5L
3,000
9,000
500
CSTCE_V
3,000
9,000
500
CSTCE_V13L
3,000
9,000
500
CSTCE_VH3L
3,000
9,000
500
CSTCW_X
3,000
9,000
500
CSTCW_X11
3,000
9,000
500
CSACW_X
3,000
9,000
500
b
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Dimensions of Reel
a
Trailer
160-190
Components
Empty
160 min.
Empty Components
Empty
160 min.
400-560
400-560
13.00.2
Leader
Cover Film
Trailer
160-190
Cover Film
(1800
1.5)
(1800
1.5)
Empty
Leader
2.00.5
+1.0
13.00.2
2.00.5
+1.0
13.0 0
9.0 0
17.01.0
13.01.0
(in mm)
Dimensions of Taping
Direction of Feed
(in mm)
10
Direction of Feed
8.00.2
1.750.1
(3)
(1.30 max.)
+0.2
4.00.1
1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
3.50.05
+0.10
3.40 -0.05
(3)(2)(1)
(5.2)
12.00.2
(1.85 max.)
0.30.05
(3)
1.250.05
4.00.1
+0.1
1.5 -0.0
2.00.05
0.250.05
0.900.10
+0.1
1.5-0
2.20.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10
4.00.1
5.50.05
(3)(2)(1)
4.70.1
+0.1
1.5 -0
2.00.05
(9.5)
CSTCE_G15L/CSTCE_GH5L
1.750.1
CSTCR_G15L/CSTCR_GH5L
4.00.1
(in mm)
38
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Dimensions of Taping
(in mm)
(in mm)
Direction of Feed
t2 *2
t1 *1
3.50.1
12.00.2
5.50.05
(1.85 max.)
0.30.05
1.250.05
1.750.1
Direction of Feed
8.00.2
(in mm)
Direction of Feed
*1, *2: Dimensions vary with product thickness of CERALOCKr.
Thickness of CERALOCKr 1.401.20 1.151.00 0.950.90
*1
t1
1.480.1 1.300.1 1.120.1
(in mm)
*2
2.1 max. 1.9 max. 1.7 max.
t2
t2 *2
8.00.2
3.50.1
1.0 +0.2
-0.0
t1 *1
2.80.1
+0.1
1.5 -0.0
2.00.1
0.20.1
t2 *2
t1 *1
1.0 +0.2
-0.0
(5.5)
8.00.2
3.50.1
4.00.1
0.20.1
2.80.1
(5.5)
+0.1
1.5 -0.0
1.750.1
CSTCW_X
1.750.1
CSACW_X
(1.40 max.)
(3)
1.100.05
0.250.05
10
+0.1
1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
10
(1.30 max.)
(3)
3.450.1
(3)(2)(1)
(5.2)
8.00.2
4.00.1
3.50.05
1.750.1
0.250.05
0.900.10
+0.2
4.00.1
1.0 -0.0
+0.10
Cover film peel strength force 0.1 to 0.7N 1.50 -0.05
Cover film peel speed 300mm/min.
Cover Film
3.50.05
+0.10
3.40 -0.05
(3)(2)(1)
(5.2)
(in mm)
CSTCE_V
+0.1
1.5 -0.0
2.00.1
(3)
Direction of Feed
CSTCE_G
4.00.1
4.70.1
(3)(2)(1)
(9.5)
12.00.2
t2 *2
t1 *1
+0.1
1.5 -0
2.20.1
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover Film
10
4.00.1
Direction of Feed
*1, *2: Dimensions vary with frequency range of CERALOCKr.
2.002.99MHz 3.003.99MHz
Frequency Range
1.850.05
1.650.05
t1
*1
2.45 max.
2.25 max.
t2
*2
(in mm)
2.00.05
+0.1
1.5 -0
2.00.05
5.50.05
(3)
1.750.1
4.00.1
0.30.05
7.60.1
(9.5)
1.550.05
4.00.1
1.5 +0.3
-0.0
Cover film peel strength force 0.1 to 0.7N 3.30.1
Cover film peel speed 300mm/min.
Cover Film
10
4.00.1
8.00.2
CSTCR_G
1.750.1
2.00.05
2.80.1
Direction of Feed
*1, *2: Dimensions vary with product thickness of CERALOCKr.
Thickness of CERALOCKr 1.401.20 1.151.00 0.950.90
t1
*1
1.480.1 1.300.1 1.120.1
(in mm)
t2
2.1 max. 1.9 max. 1.7 max.
*2
CSTCC_G
4.00.1
0.20.1
(1.40 max.)
0.250.05
Direction of Feed
1.100.05
(3)
1.0 +0.2
-0.0
+0.10
+0.1
1.5 -0.0
2.00.1
(5.5)
8.00.2
3.450.1
(3)(2)(1)
(5.2)
4.00.1
+0.1
1.0 -0.0
4.00.1
3.50.05
1.750.1
CSTCW_X11
1.750.1
CSTCE_V13L/CSTCE_VH3L
Direction of Feed
*1, *2: Dimensions vary with product thickness of CERALOCKr.
Thickness of CERALOCKr 1.401.20 1.151.00 0.950.90
t1
*1
1.480.1 1.300.1 1.120.1
(in mm)
t2
2.1 max. 1.9 max. 1.7 max.
*2
39
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Bulk
Part Number
2,000
500
2,000
500
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
dh dh
dS
M* * *
W2
W1
W0
L1
H0
H1
M* * *
D0
P1
F1 F2
P0
Item
Direction of Feed
Code
Dimensions
Tolerance
Width of diameter
8.0
1.0
Height of resonator
5.5
0.5
Dimensions of terminal
0.48
L1
5.0 min.
Pitch of component
12.7
0.5
P0
12.7
0.2
P1
3.85
0.5
P2
6.35
0.5
F1
2.5
0.2
F2
2.5
0.2
dh
1.0
18.0
0.5
W0
6.0 min.
W1
9.0
W2
0.5
+0.5
0
H0
18.0
0.5
H1
23.5
1.0
D0
4.0
0.2
0.6
0.2
1.0
dS
Remarks
0.05
1mm max.
Hold down tape does not exceed the carrier tape.
(in mm)
40
P16E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
P2
dS
H0
W0
W1
L1
H1
W2
dh dh
D0
P1 F1 F2
Direction of Feed
P0
Item
Code
Dimensions
Tolerance
Width of diameter
5.5
1.0
Height of resonator
6.5
Dimensions of terminal
0.48
L1
5.0 min.
Pitch of component
12.7
0.5
P0
12.7
0.2
P1
3.85
0.5
P2
6.35
0.5
F1
2.5
0.2
F2
2.5
0.2
dh
1.0
18.0
0.5
W0
6.0 min.
W1
9.0
W2
0.5
+0.5
0.0
H0
18.0
0.5
H1
24.5
1.0
D0
4.0
0.2
0.6
0.2
1.0
dS
Remarks
0.5
0.05
1mm max.
Hold down tape does not exceed the carrier tape.
(in mm)
41
P16E.pdf
Dec.25,2015
Global Locations
For details please visit www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the Foreign Exchange and Foreign Trade Law
of Japan, the export license specied by the law
is required for export.
Aircraft equipment
Aerospace equipment
Undersea equipment
Medical equipment
Data-processing equipment
10
www.murata.com