Beruflich Dokumente
Kultur Dokumente
CAMPUS
COMPONENT Pvt. Ltd.
www.campuscomponent.com
www.campuscomponent.com
DISCLAIMER
Information furnished is believed to be accurate and reliable at the time of
publication. However, Campus Component Pvt. Ltd. assumes no responsibility arising
from the use of the specifications described. The applications mentioned herein are
used solely for the purpose of illustration and Campus component Pvt. Ltd. makes no
warranty or representation that such applications will be suitable without further
modification, nor recommends the use of its products for application that may
present a risk to human life due to malfunction or otherwise. Campus Component Pvt.
Ltd. does not assume any liability arising out of the application or use of any product
or circuit described herein; neither does it convey any license under its patents rights,
nor the rights of other. Campus Component Pvt. Ltd. reserves the right to alter its
products without prior notification. For the most up-to-date information, please visit
our web site at http://www.campuscomponent.com
Pictures are representational only and actual product may vary.
Copyright 2011CAMPUS COMPONENT Pvt. Ltd. All rights reserved. Campus Component Pvt.
Ltd., logo and combinations thereof, are registered trademarks of CAMPUS COMPONENT Pvt.
Ltd. Other terms and product names may be trademarks of others.
Page 2
www.campuscomponent.com
Introduction:
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal
conditioned voltage outputs. The product measures acceleration with a minimum fullscale range of 3 g.
Features:
Page 3
www.campuscomponent.com
Size: 2.8x2.4 cm
Hardware Description:
Capacitor
ADXL 335
Bandwidth (Hz)
1
10
50
100
200
500
ST Pin:
The ST pin controls the self-test feature. When this pin is set to VS, an electrostatic force
is exerted on the accelerometer beam. The resulting movement of the beam allows the user to
test if the accelerometer is functional. The typical change in output is 1.08 g (corresponding
to 325 mV) in the X-axis, +1.08 g (or +325 mV) on the Y-axis, and +1.83 g (or +550 mV)
Page 4
www.campuscomponent.com
on the Z-axis. This ST pin can be left open-circuit or connected to common (COM) in normal
use.
Voltage regulator:
This IC requires voltage between1.8 V to 3.6 V which is supplied by the IC1117.It is capable of
supplying 3.3V.
Page 5
www.campuscomponent.com
Contact Address:
Mob.: +91-9767444555
Landline: +91-20-24275291
E-mail Address:
sales@campuscomponent.com
Location Map
Page 6