Beruflich Dokumente
Kultur Dokumente
Review your answers, feedback, and question scores below. An asterisk (*) indica
tes a correct answer.
This 53-question online assessment is one of the final steps in completi
ng the Fujitsu M10-1/M10-4/M10-4S (less than 16 CPUs) Server Installation guided
learning path. This assessment will allow you to test your knowledge level of t
he information learned from the Fujitsu M10 Server courses. Passing a >80% of th
is assessment makes you eligible to become an authorized Installation Specialist
for Fujitsu M10-1, M10-4,and M104S systems with less than 16 CPUs.
Electrostatic Discharge Prevention (ESD)
(Answer all questions in this section)
1.
What is the difference between a soft failure and a hard
Mark for Review
failure?
(1) Points
Soft failures are easily detected and rapidly fixed. Hard failures are d
ifficult to identify and fix.
Soft failures occurs in the software. Hard failures occurs in the hardwa
re.
Soft failures weaken components and is difficult to detect. Hard failure
s are easy to identify and trace back to ESD. (*)
Hard failures represent 80% of all failures
[Incorrect]
information.
2.
Mark for
Review
(1) Points
True (*)
False
[Correct]
Correct
3.
[Incorrect]
information.
4.
Mark for
Review
(1) Points
Work surfaces
Clothing
People
All of the above (*)
[Incorrect]
information.
5.
[Incorrect]
information.
Page 1 of 11
======================================
6.
Which of the following is NOT one of the rules for preventing ESD damage
?
Mark for Review
(1) Points
Keep items away from electronic components
Make sure your grounding straps are not in contact with your skin. (*)
Store and transport ESD-sensitive items in static-shielding containers
Handle electronic components only when you are properly grounded
[Incorrect]
information.
7.
Low humidity environments reduce the voltage generated f
rom friction and moving,
Mark for Review
(1) Points
True
False (*)
[Incorrect]
information.
8.
Why are ESD "soft failures" the most serious type of fai
lures? Mark for Review
(1) Points
The damage is immediate and easily detected
They represent 40% of all failures
The damage is not immediately noticed or detected (*)
They represent 60% of failures
[Incorrect]
information.
[Correct]
Correct
10.
True or False? The Boot Disk Layout and Mirroring Standa
rd is intended to help installation planners format their boot disks in a consis
tent and supportable manner.
Mark for Review
(1) Points
True (*)
False
[Incorrect]
Incorrect. Refer to the Using EIS Methodology training f
or more information.
====================================================
Using EIS Methodology
(Answer all questions in this section)
11.
(1) Points
Twice a month
Once a quarter
Once a year
Once a month (*)
[Incorrect]
or more information.
12.
(1) Points
Patches and SunSolve information
Information, links, downloads, detailed training, and success stories (*
)
Sun System Handbook links and links to heep://docs.sun.com
All of the above
[Incorrect]
or more information.
13.
True or False? EIS does not and cannot cover every singl
e product available from Sun. Mark for Review
(1) Points
True
False (*)
[Correct]
Correct
14.
(1) Points
A system should not experience a maximum positive or negative temperatur
e gradient of more than 2 degrees Celsiuls or 4 degrees Farenheit per hour.
A clean data center environment must be maintained: systems should be un
packed outside of the data center, and then moved into the center.
Processes are in place to ensure that equipment is not damaged due to im
proper handling or climage changes between transportation and the final destinat
ion.
All server installations are to be properly grounded according to the me
thods described in the appropriate Sun hardware documentation. (*)
[Incorrect]
or more information.
15.
(1) Points
Includes patches for Sun software required in most installations
Includes scripts to carry out standard settings and to unpack and instal
l the patches
Includes programs and tools, such as explorer and Griffon
Enables the systems to be installed consistently and without need for in
ternet connectivity (*)
All of the above
[Incorrect]
Incorrect. Refer to the Using EIS Methodology training f
or more information.
===============================
16.
True or False? EIS is an optional service for installations carried out
by Sun staff and their installation partners. Mark for Review
(1) Points
True
False (*)
[Correct]
Correct
17.
Where are the major changes between EIS-DVD revisions fo
und? (Select all that apply() Mark for Review
(1) Points
(Choose all correct answers)
On the EIS web site (*)
In the history .txt file on the DVD (*)
In the changes.txt file on the DVD
[Incorrect]
or more information.
18.
(1) Points
A project can range from a single server installation to a complex inter
nation configuration involving multiple sites, servers, storage, and services. (
*)
The purpose is to define details such as hostnames, IP addresses, and bo
ot disk layout for the new systems. Furthermore , the test that will be performe
d during customer handover are defined.
Customer details, the installation team, Radiance case numbers, and orde
r number (as appropriate) are documented.
You ensure that explorer (with the instinfo option) has been run and the
explorer data file has been uploaded in the correct configDB.
[Correct]
Correct
19.
(1) Points
All of the above. (*)
Requires the installer to use the appropriate EIS installation checklist
s when installing Solaris
Defines a method for achieving a consistent installation for Sun Systems
.
Mandates that installers use the EIS-DVD during the installation process
.
[Incorrect]
or more information.
20.
(1) Points
All of the ablve (*)
Cable labels consist of two lines of text, each containing up to five fi
elds.
The fields designate the cabinet, insertion point, board, slot, and port
.
A customer's existing cable labeling scheme can be used if it meets the
EIS requirements.
Cables must be labeled at both ends (identically).
[Correct]
Correct
=====================================
21.
True or False? The EIS Methodololgy can be applied to other post-install
ation activities such as a Solaris OS upgrade. Mark for Review
(1) Points
True (*)
False
[Correct]
Correct
22.
How do you identify a system that has been installed usi
ng EIS? (Select all that apply)
Mark for Review
(1) Points
(Choose all correct answers)
The EIS-DVD ejects from the DVD reader.
the file /var/sun/EIS-CD.log is populated when running the setup-standar
d script and the patch installation scripts. (*)
The system boots without error.
The results from Griffon should be clean. (*)
[Incorrect]
or more information.
23.
During the System Specification and Test Definitions ste
p:
Mark for Review
(1) Points
Ensure that explorer (with the instinfo option) has been run and the exp
lorer data file has been uploaded to the correct configDB.
Make sure the project can range from a single server installation to a c
omplex international configuration involving multiple sites, servers, storage, a
nd services.
Define details such as host names, IP addresses, and boot disk layout fo
r the new systems. Furthermore, the testes that will be performed during custome
r handover are defined. (*)
Create customer documentation and hand over for signoff.
[Incorrect]
or more information.
Mark for
Review
(1) Points
M10-1, M10-4, M10-4S (*)
M10-1, M10-4S, M10-16
M10-1, M10-2, M10-4S
M10-1, M10-2S, M10-3
[Incorrect]
tent and try again.
25.
Mark for Review
(1) Points
32
128
64 (*)
16
[Incorrect]
Sorry, that is not correct. Please review the course con
tent and try again.
=======================================
Fujitsu M10 Server Introduction
(Answer all questions in this section)
26.
Mark for
Review
(1) Points
3
4
1 (*)
2
[Incorrect]
tent and try again.
27.
(1) Points
3
2
0
1 (*)
[Incorrect]
tent and try again.
28.
Oracle Solaris 10 and Oracle Solaris 11 are supported on
the Fujitsu M10-Series Servers?
Mark for Review
(1) Points
True (*)
False
[Correct]
Correct!
29.
The Fujitsu M10-Series Servers support which of the foll
owing? Mark for Review
(1) Points
PPARs
Oracle VM Server for SPARC (formerly LDOMs)
Containers
PPARS, Containers, and Oracle VM Server for SPARC (formerly LDOMs) (*)
[Incorrect]
tent and try again.
30.
What size DIMMs do the Fujitsu M10-Series Servers suppor
t?
Mark for Review
(1) Points
8GB
2GB, 8GB, 16GB
32GB
8GB, 16GB, and 32GB (*)
16GB
[Incorrect]
Sorry, that is not correct. Please review the course con
tent and try again.
===================================================
31.
The PCI Expansion Unit provides for how many additional PCI slots?
Mark for Review
(1) Points
9
10
11 (*)
12
[Correct]
Correct!
32.
(1) Points
8 (*)
10
4
11
[Correct]
Correct!
33.
Which server(s) can be connected together with a CrossBa
r Box? Mark for Review
(1) Points
M10-4S (*)
M10-4
M10-4 and M10-4S
M10-1
[Correct]
Correct!
[Incorrect]
tent and try again.
server?
(1) Points
35.
How many PCIe expansion slots are on the Fujitsu M10-4S
Mark for Review
11
6
3
8 (*)
[Correct]
Correct!
==============================
36.
How many cores does the SPARC64 X processor have?
(1) Points
8
16 (*)
32
4
[Correct]
Correct!
37.
rtual machines?
(1) Points
[Correct]
Correct!
38.
[Correct]
Correct!
39.
[Correct]
Correct!
40.
What is the new Fujitsu M10-Series Server cooling featur
e?
Mark for Review
(1) Points
Liquid Loop Cooling (*)
Peltier Cooler
Heat Sinks
Advance Air Flow Cooling
[Correct]
Correct!
================================================
=========
1.
How many PCIe expansion slots are on the PCI Expansion Box?
Mark for
Review
(1) Points
6
3
11 (*)
8
[Correct]
Correct!
42.
The Fujitsu M10-Series Servers may boot Oracle Solaris 1
1 or Solaris 10? (True/False) Mark for Review
(1) Points
True (*)
False
[Correct]
Correct!
43.
What is the speed of the Fujitsu M10-Series Server's int
Mark for Review
erconnect?
(1) Points
[Correct]
Correct!
[Incorrect]
tent and try again.
45.
Mark for
Review
(1) Points
showaudit
setaudit
viewaudit (*)
cataudit
[Incorrect]
Sorry, that is not correct. Please review the course con
tent and try again.
============================================================
46.
Which command displays the XSCF firmware version?
Mark for Review
(1) Points
getflashimage
firmware
flashupdate
version (*)
[Incorrect]
tent and try again.
47.
(1) Points
activation
setcodactivation
addcodactivation (*)
showcodactivation
[Correct]
Correct!
48.
What command is used to verify assigned Building Blocks?
Mark for Review
(1) Points
showboards (*)
showhardconf
showstatus
showpcl
[Incorrect]
tent and try again.
49.
Mark for
Review
(1) Points
getflashimage (*)
flashupdate
firmware
version
[Incorrect]
tent and try again.
50.
Review
(1) Points
flashupdate (*)
version
firmware
Mark for
getflashimage
[Incorrect]
Sorry, that is not correct. Please review the course con
tent and try again.
=======================================================
51.
Initial login through the XSCF happens with which account?
Mark for
Review
(1) Points
installer
default (*)
eis-installer
root
[Correct]
Correct!
52.
(1) Points
(Choose all correct answers)
Remote Server Access (*)
Platform Monitoring (*)
Security Management (*)
Tape Configuration
Configuration Management (*)
[Incorrect]
tent and try again.
53.
Mark for Review
(1) Points
setobpparams
setmode
setpparmode (*)
setdomainmode
[Incorrect]
tent and try again.