Beruflich Dokumente
Kultur Dokumente
April 2016
Analyzer Update
1 In this version
This release contains support for new and updated file formats. There are updates for most
technologies that Actix supports, with changes falling under the following categories:
Added support for TEMS Investigation 17.2.3, TEMS Pocket 15.4.2, TEMS Symphony
7.7.2, and TEMS Automatic 11.2.
Added support for iPhone 6s Plus, SAMSUNG Note III N9008V, ZTE MF91S, ZTE Nubia
Z9 NX508J, and ZTE Q801L devices for the Ding Li file format.
Platform improvements:
None.
April 2016
An issue has been fixed that prevented Analyzer from loading a specific XCAL log file.
A problem has been resolved that caused Analyzer to detect incorrect values of EARFCN
for the 798 MHz band (band 28).
Added support for TEMS Investigation 17.2.3, TEMS Pocket 15.4.2, TEMS Symphony 7.7.2,
and TEMS Automatic 11.2.
An issue has been fixed that caused Analyzer to incorrectly detect UMTS scanner data as
CDMA scanner data.
An issue has been fixed that prevented Analyzer from setting the attribute
CPICH_Scan_RSCP_For_SC for a specific TEMS scanner log file.
An issue has been fixed that caused Analyzer to incorrectly detect an LTE scanner device
as a CDMA scanner device.
An issue has been fixed that prevented Analyzer from decoding channel RF data for CDMA
Scanner log files.
An issue has been fixed that prevented Analyzer from loading specific TEMS Symphony
version 7.7 log files.
An issue has been fixed that caused Analyzer to incorrectly report MIMO CQI
measurements (LTE_UE_WideBand_CQI_Cwd0 and LTE_UE_WideBand_CQI_Cwd1) for
Rank Indicator (RI) reporting mode messages.
An issue has been fixed that prevented Analyzer from setting relevant VoLTE attributes,
events and statistics in specific ATU log files.
ZTE MF91S
April 2016
ZTE Q801L
Improved the support of relevant Throughput attributes in Ding Li version 10.5. Attributes
involved:
Physical Throughput UL
Physical Throughput UL
Uu_HSDPA_PayloadRate_L1
Uu_HSUPA_PayloadRate_L1
Uu_HSDPA_Throughput_MAC
Ping_RTT
An issue has been fixed that prevented Analyzer from decoding Distance, although both
Latitude and Longitude attributes were correctly decoded.
A problem has been resolved that caused Analyzer to crash while loading Huawei Probe log
files version V300R015C00SPC200.
An issue has been fixed that caused Analyzer to set EARFCN=0 in case of NAS messages.
An issue has been fixed that caused Analyzer to set incorrect values of SINR
(LTE_UE_SINR).
An issue has been fixed that prevented Analyzer from setting CDMA attributes in case of
specific Nemo Handy version 2.22 log file.
A problem has been resolved that caused Analyzer to detect false VoLTE MO calls in case
of raw RTP packets not being continuously flowing during the call.
Added support for the new attribute LTE_Scan_CyclicPrefix_SortedBy_RSRP in LTE
scanner log files.
An issue has been fixed that prevented Analyzer from setting correct values of the
attribute LTE_UE_CA_Configured.
Changed the format group Nemo AQ Mean to allow the user to change the value ranges.
April 2016
Added support for the message LTE ML1 Idle Serving Cell Meas Response" version 21.
Added support for the message LTE ML1 Random Access Request (MSG1) version 25.
2.10
2.11
SwissQual support
2.12
2.13
2.14
A problem has been resolved that prevented Analyzer from displaying UMTS scanner data
in specific SwissQual log files.
VIAVI support
Added support for VIAVI version 20.1.
An issue has been fixed that caused Analyzer to set incorrect values of the EARFCN for
Band 30 VIAVI version 20 log files.
Generic
A problem has been resolved that caused Analyzer to detect false VoLTE MO calls for raw
RTP packets not continuously flowing during the call.
An issue has been fixed that caused Analyzer to set incorrect values of the attribute
Ue_Bands_UMTS for higher bands.
An issue has been fixed that prevented Analyzer from displaying data in dB in the System
Information Type 3 (SIBtype3) message.
April 2016
A problem with CDMA cellref lookup has been resolved that caused Analyzer to use only
PN and ignore the CDMA frequency.
An issue has been fixed that caused Analyzer to set SIP Registration OK and SIP
Registration Failed events twice.
April 2016
4 Platform improvements
4.1 Chart
4.2 Map
Resolved an issue where exporting a Map layer to a KML file would erroneously use
regional settings for the decimal symbol.
April 2016
5 Documentation
None.
None.
April 2016
The content of this manual is provided for information only, is subject to change without notice, and
should not be construed as a commitment by Actix. Actix assumes no responsibility or liability for any
errors or inaccuracies that appear in this documentation.
The product is protected under national and international copyright, trademark and trade secret,
patent and other intellectual property laws and treaties. The product is covered by at least one or
more of the following U.S. patents:8364141; 7653395; 8032131; 7941136; 8150417; 7881319;
7830812; 7904080; 7839846; 7062264; 7349692; 7224968; 7792032; 7634267; 7353160;
8428171; 7877095; 7768968; 8855675; 9154977; Sweden Patent: 524414; Great Britain Patents:
2,461,242; 2,467,474; 2,196,050; 1,759,549; 1,716,668; 1,678,972; 2,382,502; 2,384,663;
2,404,314; 1,606,965; Australia Patent: 2003301796; Patents registered in China P.R.: 1,934,882;
ZL200480007621.7; CN1817056; Patents registered with the European Patent Office: EP1604278;
EP1559289; French Patents: 2,196,050; 1,759,549; 1,716,668; 1,678,972; 1,468,542; 1,606,965;
German Patents: 2,196,050; 1,759,549; 1,716,668; 1,678,972; 1,468,542; 102004002145; 103 07
408; 102 51 993.5; 101 04 926; Holland Patent: 2,196,050; India Patent: 1130/CHENP/2005; Italian
Patent: 2,196,050; Patents registered in Japan: 4,499,746; 4,452,710; JP549116/2004; JP5139462;
Patents registered in Korea: 10-11-21435; 10-09-39132; New Zealand Patent: NZ540378; Patents
registered in Spain: 2,196,050;1,606,965; and pending patents.
Copyright Actix 2016. All rights reserved. All trademarks are hereby acknowledged.
April 2016
US:
AE
AU
BR
CN:
DE:
HK:
JP:
SG:
UK:
Support
+44 (0)20 8735 6303