Beruflich Dokumente
Kultur Dokumente
MAX4165–MAX4169
The MAX4165–MAX4169 family of operational ampli- ♦ 80mA (min) Output Drive Capability
fiers combines excellent DC accuracy with high output
current drive, single-supply operation, and Rail-to-Rail® ♦ Rail-to-Rail Input Common-Mode Voltage Range
inputs and outputs. These devices operate from a sin- ♦ Rail-to-Rail Output Voltage Swing
gle +2.7V to +6.5V supply, or from dual ±1.35V to
±3.25V supplies. They typically draw 1.2mA supply ♦ 1.2mA Supply Current per Amplifier
current, and are guaranteed to deliver 80mA output ♦ +2.7V to +6.5V Single-Supply Operation
current.
♦ 5MHz Gain-Bandwidth Product
The MAX4166/MAX4168 have a shutdown mode that
reduces supply current to 38µA per amplifier and ♦ 250µV Offset Voltage
places the outputs into a high-impedance state. The
MAX4165–MAX4169’s precision performance com- ♦ 120dB Voltage Gain (RL = 100kΩ)
bined with high output current, wide input/output ♦ 88dB Power-Supply Rejection Ratio
dynamic range, single-supply operation, and low power
consumption makes them ideal for portable audio ♦ No Phase Reversal for Overdriven Inputs
applications and other low-voltage, battery-powered ♦ Unity-Gain Stable for Capacitive Loads to 250pF
systems. The MAX4165 is available in the space-saving
5-pin SOT23 package. ♦ Low-Power Shutdown Mode:
Reduces Supply Current to 38µA
Selector Guide Places Outputs in High-Impedance State
♦ Available in 5-Pin SOT23 Package (MAX4165)
AMPS PER SHUTDOWN
PART
PACKAGE MODE
MAX4165 Single —
Ordering Information
MAX4166 Single Yes SOT
PIN-
MAX4167 Dual — PART TEMP. RANGE TOP
PACKAGE
MAX4168 Dual Yes MARK
MAX4169 Quad — MAX4165EUK-T -40°C to +85°C 5 SOT23-5 AABY
MAX4166EPA -40°C to +85°C 8 Plastic DIP —
MAX4166ESA -40°C to +85°C 8 SO —
________________________Applications
MAX4166EUA -40°C to +85°C 8 µMAX —
Portable/Battery-Powered Audio Applications
Ordering Information continued at end of data sheet.
Portable Head-Phone Speaker Drivers
Laptop/Notebook Computers
Pin Configurations
Sound Ports/Cards
Set-Top Boxes
TOP VIEW
Cell Phones
Hands-Free Car Phones (kits) OUT 1 5 VCC
Signal Conditioning
MAX4165
Digital-to-Analog Converter Buffers VEE 2
Transformer/Line Drivers
Motor Drivers IN+ 3 4 IN-
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
For small orders, phone 408-737-7600 ext. 3468.
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
ABSOLUTE MAXIMUM RATINGS
MAX4165–MAX4169
Supply Voltage (VCC to VEE) ....................................................7V 8-Pin µMAX (derate 4.10mW/°C above +70°C) ............330mW
IN_+, IN_-, SHDN_............................(VEE - 0.3V) + (VCC + 0.3V) 10-Pin µMAX (derate 5.60mW/°C above +70°C) ..........444mW
OUT_ (shutdown mode) ...................(VEE - 0.3V) + (VCC + 0.3V) 14-Pin Plastic DIP (derate 10.00mW/°C above +70°C)...800mW
Output Short-Circuit Duration to VCC or VEE (Note 1)....Continuous 14-Pin SO (derate 8.33mW/°C above +70°C)...............667mW
Continuous Power Dissipation (TA = +70°C) Operating Temperature Range ...........................-40°C to +85°C
5-Pin SOT23 (derate 7.10mW/°C above +70°C)...........571mW Junction Temperature ......................................................+150°C
8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ....727mW Storage Temperature Range .............................-65°C to +150°C
8-Pin SO (derate 5.88mW/°C above +70°C).................471mW Lead Temperature (soldering, 10sec) .............................+300°C
DC ELECTRICAL CHARACTERISTICS
(VCC = +2.7V to +6.5V, VEE = 0V, VCM = 0V, VOUT = (VCC / 2), RL = 100kΩ to (VCC / 2), V S HDN ≥ 2V, TA = +25°C, unless otherwise
noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
MAX416_EPA/EPD 0.25 0.85
MAX416_ESA/ESD 0.25 0.85
Input Offset Voltage VOS VCM = VEE to VCC MAX416_EUA/EUB 0.35 1.7 mV
MAX416_EUK 0.35 1.5
MAX4169E_D 0.25 1.0
Input Bias Current IB VCM = VEE to VCC ±50 ±150 nA
Input Offset Current IOS VCM = VEE to VCC ±1 ±15 nA
| VIN+ - VIN- | ≤ 1.8V 500
Differential Input Resistance RIN(DIFF) kΩ
| VIN+ - VIN- | > 1.8V 2
Common-Mode Input
VCM Inferred from CMRR test VEE - 0.25 VCC + 0.25 V
Voltage Range
MAX416_EPA/EPD 72 93
MAX416_ESA/ESD 72 93
Common-Mode VEE - 0.25V <
CMRR MAX416_EUA/EUB 62 89 dB
Rejection Ratio VCM < (VCC + 0.25V)
MAX416_EUK 63 90
MAX4169E_D 71 93
MAX416_EPA/EPD 72 88
MAX416_ESA/ESD 72 88
Power-Supply Rejection Ratio PSRR VCC = 2.7V to 6.5V MAX416_EUA/EUB 72 86 dB
MAX416_EUK 72 86
MAX4169E_D 70 88
Output Resistance ROUT AVCL = +1V/V 0.1 Ω
Off-Leakage Current
IOUT(SHDN) V SHDN < 0.8V, VOUT = 0V to VCC ±0.001 ±2 µA
in Shutdown
VOUT = 0.2V to 4.8V, RL = 100kΩ 95 120
Large-Signal Voltage Gain AVOL VCC = 5V dB
VOUT = 0.6V to 4.4V, RL = 25Ω 71 83
2 _______________________________________________________________________________________
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
DC ELECTRICAL CHARACTERISTICS (continued)
MAX4165–MAX4169
(VCC = +2.7V to +6.5V, VEE = 0V, VCM = 0V, VOUT = (VCC / 2), RL = 100kΩ to (VCC / 2), V S HDN ≥ 2V, TA = +25°C, unless otherwise
noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
VCC - VOH 15 30
RL = 100kΩ
VOL - VEE 10 25
Output Voltage Swing VOUT VCC = 5V mV
VCC - VOH 340 430
RL = 25Ω
VOL - VEE 160 350
Output Source/Sink Current
VOUT = 0.6V to (VCC - 0.6V) ±80 ±125 mA
(Note 2)
SHDN Logic Threshold VIL Shutdown mode 0.8
V
(Note 3) VIH Normal mode 2.0
SHDN Input Bias Current VEE < V S HDN < VCC ±3.0 µA
Operating Supply-Voltage
VCC Inferred from PSRR test 2.7 6.5 V
Range
Quiescent Supply Current VCC = 5V 1.3 1.5
ICC mA
(per Amplifier) VCC = 3V 1.2 1.4
Shutdown Supply Current VCC = 5V 58 75
ICC(SHDN) V S HDN < 0.8V µA
(per Amplifier) VCC = 3V 38 49
DC ELECTRICAL CHARACTERISTICS
(VCC = +2.7V to +6.5V, VEE = 0V, VCM = 0V, VOUT = (VCC / 2), RL = 100kΩ to (VCC / 2), V S HDN ≥ 2V, TA = -40°C to +85°C, unless
otherwise noted.) (Note 4)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
MAX416_EPA/EPD 1.0
MAX416_ESA/ESD 1.0
Input Offset Voltage VOS VCM = VEE to VCC MAX416_EUA/EUB 4.9 mV
MAX416_EUK 4.3
MAX4169E_D 1.2
Offset-Voltage Tempco ∆VOS/∆T ±3 µV/°C
Input Bias Current IB VCM = VEE to VCC ±225 nA
Input Offset Current IOS VCM = VEE to VCC ±21 nA
Common-Mode Input
VCM Inferred from CMRR test VEE - 0.15 VCC + 0.15 V
Voltage Range
MAX416_EPA/EPD 71
MAX416_ESA/ESD 71
Common-Mode VEE - 0.15V < VCM <
CMRR MAX416_EUA/EUB 56 dB
Rejection Ratio (VCC + 0.15V)
MAX416_EUK 57
MAX4169E_D 69
MAX416_EPA/EPD 67
MAX416_ESA/ESD 67
Power-Supply Rejection Ratio PSRR VCC = 2.7V to 6.5V MAX416_EUA/EUB 65 dB
MAX416_EUK 65
MAX4169E_D 66
_______________________________________________________________________________________ 3
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
DC ELECTRICAL CHARACTERISTICS (continued)
MAX4165–MAX4169
(VCC = +2.7V to +6.5V, VEE = 0V, VCM = 0V, VOUT = (VCC / 2), RL = 100kΩ to (VCC / 2), V S HDN ≥ 2V, TA = -40°C to +85°C, unless
otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Off-Leakage Current
IOUT(SHDN) V SHDN < 0.8V, VOUT = 0V to VCC ±5 µA
in Shutdown
VOUT = 0.2V to 4.8V, RL = 100kΩ 90
Large-Signal Voltage Gain AVOL V CC = 5V dB
VOUT = 0.6V to 4.4V, RL = 25Ω 66
VCC - VOH 40
RL = 100kΩ
VOL - VEE 30
Output Voltage Swing VOUT V CC = 5V mV
VCC - VOH 490
RL = 25Ω
VOL - VEE 400
Output Source/Sink Current
VOUT = 0.6V to (VCC - 0.6V) ±80 mA
(Note 2)
SHDN Logic Threshold VIL Shutdown mode 0.8
V
(Note 3) VIH Normal mode 2.0
SHDN Input Bias Current VEE < V S HDN < VCC ±3.5 µA
Operating Supply-Voltage
VCC Inferred from PSRR test 2.7 6.5 V
Range
Quiescent Supply Current VCC = 5V 1.7
ICC mA
(per Amplifier) VCC = 3V 1.6
Shutdown Supply Current VCC = 5V 82
ICC(SHDN) V S HDN < 0.8V µA
(per Amplifier) VCC = 3V 54
Note 2: Although the minimum output current is guaranteed to be ±80mA, exercise caution to ensure that the absolute maximum
power-dissipation rating of the package is not exceeded.
Note 3: SHDN logic thresholds are referenced to VEE.
Note 4: The MAX4165EUK is 100% tested at +25°C. All temperature limits are guaranteed by design.
AC ELECTRICAL CHARACTERISTICS
(VCC = +2.7V to +6.5V, VEE = 0V, VCM = 0V, VOUT = (VCC / 2), RL = 2.5kΩ to (VCC / 2), V S HDN ≥ 2V, CL = 15pF, TA = +25°C, unless
otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Gain-Bandwidth Product GBWP 5 MHz
Full-Power Bandwidth FPBW VOUT = 4Vp-p, VCC = 5V 260 kHz
Slew Rate SR 2 V/µs
Phase Margin PM 68 degrees
Gain Margin GM 21 dB
Total Harmonic Distortion THD f = 10kHz, VOUT = 2Vp-p, AVCL = +1V/V 0.005 %
Settling Time to 0.01% tS AVCL = +1V/V, 2V step 2.1 µs
Input Capacitance CIN 3 pF
Input Voltage Noise Density en f = 1kHz 26 nV/√Hz
Input Current Noise Density in f = 1kHz 0.4 pA/√Hz
Channel-to-Channel Isolation f = 1kHz, RL = 100kΩ (MAX4167–MAX4169) 125 dB
Capacitive Load Stability AVCL = +1V/V, no sustained oscillations 250 pF
Shutdown Time t S HDN 1 µs
Enable Time from Shutdown tENABLE 1 µs
Power-Up Time tON 5 µs
4 _______________________________________________________________________________________
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
__________________________________________Typical Operating Characteristics
MAX4165–MAX4169
(VCC = +5.0V, VEE = 0V, RL = 100kΩ, TA = +25°C, unless otherwise noted.)
MAX4165-03A
AVCL = +1000V/V AVCL = +1000V/V AVCL = +1
60 180 60 CL = 250pF 180 0
50 144 50 144 -10
40 108 40 108 -20
PHASE (DEGREES)
PHASE (DEGREES)
72 -30
PSRR (dB)
30
GAIN (dB)
30 72
GAIN (dB)
20 36 20 36 -40
10 0 10 0 -50
MAX4165-05
MAX4165-03B
1.2 60
OUTPUT IMPEDANCE (Ω)
100
SUPPLY CURRENT (mA)
10 0.8 40
1 0.4 20
0.2 10
0.1 0 0
1 10 100 1k 10k 100k 1M 10M -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
FREQUENCY (Hz) TEMPERATURE (°C) TEMPERATURE (°C)
MAX4165-07
MAX4165-08
SOT23-5
1.75 PACKAGE
60 60
VCC = +2.7V VCC = +6.5V
1.25
INPUT BIAS CURRENT (nA)
40 40
VCC = +2.7V, VCM = VCC 0.75
VOLTAGE (mV)
0 0 -0.25
VCC = +2.7V, VCM = VEE -0.75
-20 -20 VCC = +6.5V, VCM = VEE
-1.25 SO PACKAGE
-40 -40
-1.75
-60 -60 -2.25
0 1 2 3 4 5 6 7 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80
COMMON-MODE VOLTAGE (V) TEMPERATURE (°C) TEMPERATURE (°C)
_______________________________________________________________________________________ 5
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
____________________________Typical Operating Characteristics (continued)
MAX4165–MAX4169
MINIMUM OPERATING VOLTAGE COMMON-MODE REJECTION RATIO LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE
vs. TEMPERATURE vs. TEMPERATURE (SINKING, VCC = 6.5V)
2.00 88.0 140
MAX4165-09
MAX4165-11
MAX4165-10
RL = 100kΩ
87.5
MINIMUM OPERATING VOLTAGE (V)
120
1.95
80
86.0
60
1.85
85.5
40
85.0
1.80
84.5 20 VCC = +6.5V
RL to VCC
1.75 84.0 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 0 0.1 0.2 0.3 0.4 0.5 0.6
TEMPERATURE (°C) TEMPERATURE (°C) OUTPUT VOLTAGE (V)
LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE
(SOURCING, VCC = 6.5V) (SINKING, VCC = 2.7V) (SOURCING, VCC = 2.7V)
125 120 120
MAX4165-12
MAX4165-14
MAX4165-13
115
80 80 RL = 1kΩ
RL = 100Ω RL = 100Ω
110 RL = 1kΩ
60 60
105
RL = 100Ω
40 40
100
95 20 20 VCC = +2.7V
VCC = +6.5V VCC = +2.7V
RL to VEE RL to VEE
RL to VCC
90 0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0 0.05 0.10 0.15 0.20 0.25 0.30 0.36 0.40
OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V)
LARGE-SIGNAL GAIN vs. TEMPERATURE LARGE-SIGNAL GAIN vs. TEMPERATURE OUTPUT VOLTAGE LOW
(RL = 100Ω) (RL = 100kΩ) vs. TEMPERATURE
110 125 120
MAX4165-15a
MAX4165-15
MAX4165-16
90 VCC = +6.5V
117 RL to VCC or VEE
85 60
115 VCC = +2.7V, RL = 100Ω
80 VCC = +6.5V
VCC = +2.7V RL to VCC VCC = +2.7V 113 40
75 RL to VCC RL to VEE
VCC = +6.5V, RL = 100kΩ
111
70 VCC = +2.7V 20 VCC = +2.7V, RL = 100kΩ
VOUTp-p = VCC - 1V
65 109 RL to VCC or VEE
RL = 100Ω
60 107 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
TEMPERATURE (°C) TEMPERATURE (°C) TEMPERATURE (°C)
6 _______________________________________________________________________________________
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
____________________________Typical Operating Characteristics (continued)
MAX4165–MAX4169
(VCC = +5.0V, VEE = 0V, RL = 100kΩ, TA = +25°C, unless otherwise noted.)
OUTPUT VOLTAGE HIGH TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION AND NOISE
vs. TEMPERATURE AND NOISE vs. FREQUENCY vs. PEAK-TO-PEAK OUTPUT VOLTAGE
300 0.05 1
MAX4165-18
MAX4165-17
MAX4165-19
RL to VEE VOUT = 2Vp-p
250 500kHz LOWPASS FILTER
VCC = +6.5V, RL = 100Ω RL = 25Ω
0.04 RL = 10kΩ TO VCC / 2
OUTPUT VOLTAGE HIGH (mV)
0.01
50
f = 10kHz
VCC = +6.5V OR + 2.7V, RL = 100kΩ RL to VCC / 2 RL = 100kΩ
0 0 0.001
-40 -20 0 20 40 60 80 100 10 100 1k 10k 100k 4.0 4.2 4.4 4.6 4.8 5.0
TEMPERATURE (°C) FREQUENCY (Hz) PEAK-TO-PEAK OUTPUT (V)
125
120
IN
115 (50mV/div) IN
110 (50mV/div)
105
100
OUT
95 (50mV/div)
OUT
90 (50mV/div)
85
80
1k 10k 100k 1M 10M TIME (500ns/div) TIME (500ns/div)
FREQUENCY (Hz)
IN
(2V/div)
IN
(2V/div)
OUT
(2V/div)
OUT
(2V/div)
_______________________________________________________________________________________ 7
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
Pin Description
MAX4165–MAX4169
PIN
MAX4168 NAME FUNCTION
MAX4165 MAX4166 MAX4167 MAX4169
DIP/SO µMAX
1 6 — — — — OUT Output
— 1, 5 — 5, 7, 8, 10 — — N.C. No Connection. Not internally connected.
OUT1,
— — 1, 7 1, 13 1, 9 1, 7 Outputs for Amplifiers 1 and 2
OUT2
IN1-,
— 2, 6 2, 12 2, 8 2, 6 Inverting Inputs for Amplifiers 1 and 2
IN2-
IN1+,
— — 3, 5 3, 11 3, 7 3, 5 Noninverting Inputs for Amplifiers 1 and 2
IN2+
OUT3,
— — — — — 8, 14 Outputs for Amplifiers 3 and 4
OUT4
IN3-,
— — — — — 9, 13 Inverting Inputs for Amplifiers 3 and 4
IN4-
IN3+,
— — — — — 10, 12 Noninverting Inputs for Amplifiers 3 and 4
IN4+
8 _______________________________________________________________________________________
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
Applications Information
MAX4165–MAX4169
6.5V
Package Power Dissipation
Warning: Due to the high output current drive, this op
amp can exceed the absolute maximum power-dissi- R
pation rating. As a general rule, as long as the peak cur-
C
rent is less than or equal to 80mA, the maximum package
VIN = 3Vp-p
power dissipation will not be exceeded for any of the
package types offered. There are some exceptions to this
R MAX4165
rule, however. The absolute maximum power-dissipation MAX4166
rating of each package should always be verified using
60Ω
the following equations. The following equation gives an
approximation of the package power dissipation:
PIC(DISS) ≅ VRMS IRMS COS θ
where: VRMS = the RMS voltage from VCC to VOUT Figure 1. A Circuit Example where the MAX4165/MAX4166 is
when sourcing current Being Used in Single-Supply Operation
= the RMS voltage from V OUT to V EE
when sinking current 6.5V
(
VRMS ≅ VCC − VDC − PEAK )
V 60Ω
2
CC = 1
1.5V
= 6.5V − 3.25V − = 2.189VRMS 2π RL fL
2
I 3.25V 1.5V / 60Ω
IRMS ≅ IDC + PEAK = + Figure 2. A Circuit Example where Adding a Coupling
2 60 Ω 2 Capacitor Greatly Reduces the Power Dissipation of Its
Package
= 71.84mARMS
Therefore, PIC(DISS) = VRMS IRMS COS θ
Therefore, PIC(DISS) = VRMS IRMS COS θ
= 157mW
= 38.6mW
Adding a coupling capacitor improves the package
The absolute maximum power-dissipation rating of this
power dissipation because there is no DC current to
package would be exceeded if the configuration in
the load, as shown in Figure 2.
Figure 1 were used with all four of the MAX4169ESD’s
(
VRMS ≅ VCC − VDC − ) VPEAK amplifiers at a high ambient temperature of +75°C
(157mW x 4 amplifiers = 628mW + a derating of
2
8.33mW/°C x 5°C = 669mW). Note that 669mW just
1.5V
= 6.5V − 3.25V − = 2.189VRMS exceeds the absolute maximum power dissipation of
2 667mW for the 14-pin SO package (see the Absolute
I 1.5V / 60Ω Maximum Ratings section).
IRMS ≅ IDC + PEAK = 0A +
2 2
= 17.67mARMS
_______________________________________________________________________________________ 9
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
MAX4165–MAX4169
INPUT
0.25Vp-p VCC = +3V
MAX4165
0.1µF VCC = +3V MAX4166
1/2 MAX4167 MAX4167
1/2 MAX4168 MAX4168
100k
4.7k MAX4169
100k R3
900k
4.7k 1µF R3 = R1 R2
100k
47Ω 32Ω
100k R1 R2
100k VCC = +3V 0.1µF
Figure 4. Reducing Offset Error Due to Bias Current
1/2 MAX4167 (Noninverting)
100k 1/2 MAX4168
10 ______________________________________________________________________________________
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
MAX4165–MAX4169
1k
1k
MAX4165-fig07
VCC = +3.0V
input voltage passes through the transition region. Match RL = 100kΩ
the effective impedance seen by each input to reduce the
offset error caused by input bias currents flowing through
external source impedances (Figures 4 and 5). IN
(1V/div)
High source impedances, together with input capaci-
tance, can create a parasitic pole that produces an
underdamped signal response. Reducing the input
impedance or placing a small (2pF to 10pF) capacitor OUT
across the feedback resistor improves response. (1V/div)
The MAX4165–MAX4169’s inputs are protected from large
differential input voltages by 1kΩ series resistors and
back-to-back triple diodes across the inputs (Figure 6). TIME (5µs/div)
For differential voltages less than 1.8V, input resistance is
typically 500kΩ. For differential input voltages greater Figure 7. Rail-to-Rail Input/Output Range
than 1.8V, input resistance is approximately 2kΩ. The
input bias current is given by the following equation: Driving Capacitive Loads
IBIAS = (VDIFF - 1.8V) / 2kΩ The MAX4165–MAX4169 have a high tolerance for
capacitive loads. They are stable with capacitive loads
Rail-to-Rail Output Stage up to 250pF. Figure 8 is a graph of the stable operating
The minimum output is within millivolts of ground for region for various capacitive loads vs. resistive loads.
single-supply operation, where the load is referenced Figures 9 and 10 show the transient response with
to ground (VEE). Figure 7 shows the input voltage range excessive capacitive loads (1500pF), with and without
and the output voltage swing of a MAX4165 connected the addition of an isolation resistor in series with the
as a voltage follower. The maximum output voltage output. Figure 11 shows a typical noninverting capaci-
swing is load dependent; however, it is guaranteed to tive-load-driving circuit in the unity-gain configuration.
be within 430mV of the positive rail (VCC = 5V) even The resistor improves the circuit’s phase margin by iso-
with maximum load (25Ω to ground). lating the load capacitor from the op amp’s output.
______________________________________________________________________________________ 11
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
MAX4165–MAX4169
1300
MAX4165-fig08
MAX4165-fig09
VCC = +5.0V VCC = +3.0V, CL = 1500pF
1200
RL to VCC / 2 RL = 100kΩ, RISO = 0Ω
1100
1000
CAPACITIVE LOAD (pF)
900
IN
800 UNSTABLE REGION
(20mV/div)
700
600
500
400
OUT
300 STABLE REGION (20mV/div)
200
100
0
10 100 1k 10k 100k TIME (1µs/div)
RESISTIVE LOAD (kΩ)
Figure 8. Capacitive Load Stability Figure 9. Small-Signal Transient Response with Excessive
Capacitive Load
MAX4165-fig10
IN
(20mV/div)
RISO
OUT CL
(20mV/div)
TIME (1µs/div)
Figure 10. Small-Signal Transient Response with Excessive Figure 11. Capacitive-Load-Driving Circuit
Capacitive Load with Isolation Resistor
12 ______________________________________________________________________________________
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
MAX4165–MAX4169
MAX4165-fig12
MAX4165-fig13
SHDN SHDN
(1V/div) (1V/div)
ICC
OUT (1mA/div)
(1V/div)
Figure 12. Shutdown Output Voltage Enable/Disable Figure 13. Shutdown Enable/Disable Supply Current
MAX4165-fig14
MAX4165-fig15
VCC
(1V/div)
VCC
(1V/div)
OUT IEE
(2V/div) (1mA/div)
Figure 14. Power-Up/Down Output Voltage Figure 15. Power-Up/Down Supply Current
______________________________________________________________________________________ 13
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
Pin Configurations (continued)
MAX4165–MAX4169
TOP VIEW
DIP/SO/µMAX DIP/SO
OUT1 1 10 VCC
IN1- 2 9 OUT2
MAX4168
IN1+ 3 8 IN2-
VEE 4 7 IN2+
SHDN1 5 6 SHDN2
µMAX
DIP/SO DIP/SO
14 ______________________________________________________________________________________
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
Typical Operating Circuit Ordering Information (continued)
MAX4165–MAX4169
SOT
PIN-
VCC PART TEMP. RANGE TOP
PACKAGE
MARK
MAX4167EPA -40°C to +85°C 8 Plastic DIP —
R3 MAX4167ESA -40°C to +85°C 8 SO —
C1 MAX4168EPD -40°C to +85°C 14 Plastic DIP —
VIN MAX4168ESD -40°C to +85°C 14 SO —
C2
MAX4168EUB -40°C to +85°C 10 µMAX —
MAX4165
R4 MAX4166 MAX4169EPD -40°C to +85°C 14 Plastic DIP —
MAX4169ESD -40°C to +85°C 14 SO —
Package Information
8LUMAXD.EPS
______________________________________________________________________________________ 15
High-Output-Drive, Precision, Low-Power, Single-
Supply, Rail-to-Rail I/O Op Amps with Shutdown
Package Information (continued)
MAX4165–MAX4169
SOT5L.EPS
10LUMAXB.EPS
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
16 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 1997 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
This datasheet has been download from:
www.datasheetcatalog.com