Beruflich Dokumente
Kultur Dokumente
1
Identify tasks to be undertaken for care and maintenance of drawing accdg. To company
procedure
PROPER CARE AND MAINTENANCE OF DRAWINGS.
1. Pencil
a. Never sharpen the pencil over the drawing or close to any of your equipment.
b. Always keep the lead sharp.
2. T-square triangles and French curves
a. Do not use the T-square for any rough purposes.
b. Never cut paper along its working edge, since the plastics can easily be damaged.
Even light nick can ruin the T-square.
3. Ruler or scale
a. Scales should not be pricked with needle Scales should points of either the divider or
compass
when measurements are taken.
b. Do not use scale as a ruler.
4. Drawing paper
a. It should be stored in rolled form.
b. It should not be crumpled or wet or kept in a moist or cold place.
c. Oslo papers or bond papers must be kept in a large envelope.
5. Masking tape or scotch tape, eraser and erasing shield
a. Should be kept together with other supplies to avoid losing it.
6. Drawing board or drawing tape
a. It should always be in good (drawing) working condition.
b. It must always be clean on or before using.
c. Do not leave any kind of marks on your board to retain its smoothness.
TASK SHEET
GROUP ACTIVITY
Direction: The learners are divided into 2 groups. Each group will share how to care and
maintain the drawing accdg. To company procedure.
PERFORMANCE CRITERIA CHECKLIST
PROPER CARE AND MAINTENANCE
Never sharpen the pencil over the drawing or close to any of your
equipment
Always keep the lead sharp
Do not use the T-square for any rough purposes
Never cut paper along its working edge, since the plastics can easily be
damaged.
Even light nick can ruin the T-square.
Scales should not be pricked with needle Scales should points of either
the divider or compass when measurements are taken.
Do not use scale as a ruler.
It should be stored in rolled form
It should not be crumpled or wet or kept in a moist or cold place.
Oslo papers or bond papers must be kept in a large envelope.
Should be kept together with other supplies to avoid losing it.
It should always be in good (drawing) working condition
It must always be clean on or before using.
Do not leave any kind of marks on your board to retain its smoothness.
YES
NO
supplies
to avoid losing it.
f. It must always be clean on or before
using.
ANSWER KEY
1. B
2. E
3. F
4. A
5. C
6. D