Beruflich Dokumente
Kultur Dokumente
Page 1 of 12
Footing No.
-
Footing No.
-
Bottom Reinforcement(Mz)
6 @ 155 mm c/c
Group ID
-
Length
0.590 m
Footing Reinforcement
Bottom Reinforcement(Mx)
6 @ 160 mm c/c
Top Reinforcement(Mz)
6 @ 155 mm c/c
Isolated Footing 1
Foundation Geometry
Width
0.585 m
Top Reinforcement(Mx)
6 @ 160 mm c/c
Thickness
0.131 m
Pedestal Reinforcement
Main Steel
N/A
Trans Steel
N/A
Input Values
Footing Geomtery
Design Type : Calculate Dimension
Column Dimensions
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 2 of 12
Pedestal
Include Pedestal? No
Design Parameters
Soil Properties
Soil Type : UnDrained
------------------------------------------------------
Load Combination
Number
101
102
Load Combination
Number
201
202
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
1.500 x DL
0.960 x DL
7/30/2016
Page 3 of 12
203
1.200 x DL
204
0.900 x DL
LC
LC
101
102
Axial
(kN)
10.309
8.247
201
202
203
204
Axial
(kN)
15.464
9.897
12.371
9.278
Shear X
(kN)
0.717
0.574
Shear Z
(kN)
0.829
0.663
Moment X
(kNm)
0.024
0.019
Moment Z
(kNm)
0.027
0.022
Shear X
(kN)
1.075
0.688
0.860
0.645
Shear Z
(kN)
1.243
0.796
0.995
0.746
Moment X
(kNm)
0.036
0.023
0.029
0.022
Moment Z
(kNm)
0.040
0.026
0.032
0.024
------------------------------------------------------
Design Calculations
Footing Size
0.590
# 101
Width (W2) =
0.585
# 101
Depth (D2) =
0.131
# 101
Area (A2) =
0.345
m2
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 4 of 12
Load Case
Pressure at
corner 1 (q1)
Pressure at
corner 2 (q2)
Pressure at
corner 3 (q3)
Pressure at
corner 4 (q4)
Area of
footing in
uplift (Au)
101
28.2800
31.1675
37.8164
34.9288
0.000
101
27.8860
31.8298
39.7104
35.7665
0.000
101
101
(kN/m2)
(kN/m2)
27.8860
31.8298
27.8860
31.8298
(kN/m2)
(kN/m2)
39.7104
(m2)
35.7665
39.7104
0.000
35.7665
0.000
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of
negative pressure will be set to zero and the pressure will be redistributed to remaining corners.
Summary of adjusted Pressures at Four Corner
Load Case
101
Pressure at
corner 1 (q1)
(kN/m2)
28.2800
101
101
Pressure at
corner 2 (q2)
(kN/m2)
(kN/m2)
31.1675
27.8860
31.8298
27.8860
31.8298
27.8860
101
Pressure at
corner 3 (q3)
37.8164
39.7104
31.8298
39.7104
39.7104
Pressure at
corner 4 (q4)
(kN/m2)
34.9288
35.7665
35.7665
35.7665
------------------------------------------------------
Load Case
No.
Along XDirection
Along ZDirection
About XDirection
About ZDirection
102
8.371
7.240
26.481
52.914
101
8.135
7.036
25.733
51.419
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding X Direction
Critical Load Case for Sliding along X-Direction : 101
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 5 of 12
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding Z Direction
Critical Load Case for Sliding along Z-Direction : 101
------------------------------------------------------
Moment Calculation
Effective Depth =
= 0.078 m
= 0.479107
= 3444.291146 kN/m2
= 12.258488 kNm
Effective Depth =
= 0.078 m
= 0.479107
= 3444.291146 kN/m2
= 12.363262 kNm
------------------------------------------------------
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 6 of 12
Shear Calculation
Check Trial Depth for one way shear (Along X Axis)
(Shear Plane Parallel to X Axis)
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 7 of 12
= 0.500
Shear Strength(Tc)=
= 1250.0000 kN/m2
Ks x Tc = 625.0000 kN/m2
------------------------------------------------------
Reinforcement Calculation
Development Length(ld) =
Allowable Length(ldb) =
= 0.242 m
= 0.242 m
Along Z Axis
Bar diameter corresponding to max bar size(db) = 6 mm
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 8 of 12
Development Length(ld) =
Allowable Length(ldb) =
= 0.242 m
= 0.242 m
Smin <= S <= Smax and selected bar size < selected maximum bar size...
The reinforcement is accepted.
Along X Axis
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 9 of 12
Smin <= S <= Smax and selected bar size < selected maximum bar size...
The reinforcement is accepted.
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 10 of 12
Smin <= S <= Smax and selected bar size < selected maximum bar size...
The reinforcement is accepted.
Along X Axis
Smin <= S <= Smax and selected bar size < selected maximum bar size...
The reinforcement is accepted.
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 11 of 12
6 @ 155 mm o.c.
------------------------------------------------------
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016
Page 12 of 12
file:///C:/Staad.foundation%205.3/CalcXsl/footing.xml
7/30/2016