Sie sind auf Seite 1von 18

One Tellabs Center

1415 West Diehl Road


Naperville, IL, 60563, USA
+1.630.378.8800 Fax: +1.630.852.7346

Tellabs 6300 Client Installation Guide


Tellabs Part No.: 76.6300-001 / Revision A

Original on electronic medium - This copy will not be updated


Document ID: 44365
Issue date: 2013/08/21

Editor: Harsh Mehta


Signator: Genping Gong

6300 Client Installation Guide

Table of Content
1
2
3

INTRODUCTION ..................................................................................................................................................... 3
Platform Information ................................................................................................................................................. 3
Fresh Installation ....................................................................................................................................................... 4
3.1
TeMIP client Installation ................................................................................................................................... 4
3.2
Network Manager Client/ECT/CT Installation .................................................................................................. 5
3.2.1
Installation of the Network Manager Client ............................................................................................... 5
3.2.2
Installation of ECT/CT ............................................................................................................................. 11
3.2.3
Product Shortcuts in Start Menu .............................................................................................................. 14
3.2.4
Upgrade of installed product: ................................................................................................................... 15
4
PPP Installation for CT............................................................................................................................................ 16
4.1
Access to the Network Elements through CT .................................................................................................. 16
4.2
PPP Configuration (Windows XP/Windows7) ................................................................................................ 16
4.3
Running the Craft Terminal ............................................................................................................................. 16
5
Configuration .......................................................................................................................................................... 17
5.1
Configuration of GUI timers ............................................................................................................................ 17
5.2
Configuration of logs ....................................................................................................................................... 17
6
De-Installation ......................................................................................................................................................... 18

Tellabs Part No.: 76.6300-001

Page 2 of 18

6300 Client Installation Guide

1 INTRODUCTION
This document details the installation procedure for the below mentioned products.
1.
2.
3.
4.

Network Manager Client (NM Client): Tellabs 6300 FP3.1 NM Client GA or higher
Extended Craft Terminal (ECT): Tellabs 6300 FP3.1 ECT GA or higher
Craft Terminal (CT): Tellabs 6300 FP3.1 CT GA or higher
TeMIP client : TeMIP Client 6.3

For 1, 2 and 3 above this installation will auto start after inserting the CD into the CD drive. If you copy
the iso or zip file into the PC then extract/unzip and execute setup.exe

2 Platform Information
rd

Client 3
Party
Platform
Software

The Tellabs Client/ECT/CT/Temip client requires the following 3rd party software versions:

Windows XP (32 bits), Professional Edition, UK version (Recommended OS) OR

Windows 7 (32 bits), Professional Edition, UK version (Recommended OS) OR

Windows 7 (64 bits), Professional Edition, UK version (Recommended OS)

Note that the installation and operation of Client is verified by Tellabs based on the UK localized
version of the Windows operating system (Language for non-Unicode programs set to English
(UK)).If an attempt to install on other localized version fails please contact Tellabs.

Client
Minimum
Requirements

The Tellabs 6300 Network Management System client requires the following as a minimum in order
to run successfully:

CPU 1 GHz recommended 2 GHz

512 MB RAM recommended 1 GB RAM

1 GB free disk space recommended 2 GB

A monitor capable of displaying 1024x768 pixels in 256 colors

A mouse or a similar device

TCP/IP connection to the Sun Server (only in case while installing the NM Client)

Tellabs Part No.: 76.6300-001

Page 3 of 18

6300 Client Installation Guide

3 Fresh Installation
3.1

TeMIP client Installation

TeMIP Client

V6.3

The TeMIP Client removing / installing procedures:

1. Stop all running TeMIP Clients

2. Uninstall all TeMIP Client Patches.


Open the Control Panel, open Add/Remove Programs and select TeMIP Client patches.
Click on Remove for each of them.

3. Uninstall installed TeMIP Client.


Open Control Panel, open Add/Remove Programs and select TeMIP Client.
Click on Remove.

4. Then execute the bat file InstallTeMIPClient.bat from zip file TeMIP client
6.3_update121116.zip. Pls. note that in Windows7 you need to right click bat file and select run as
administrator.

5. Finally install patch from TEMIPTCTWIN_00030.zip by executing TEMIPTCTWIN00030.exe.

6. When installation is complete you need to synchronize client with TeMIP Resource server as follows:

Open the TeMIP Resource server from the installation menu of TeMIP Client

Click Synchronize to synchronize the files from the server to the TeMIP client

Close TeMIP Resource server when Synchronize has completed.

Tellabs Part No.: 76.6300-001

Page 4 of 18

6300 Client Installation Guide

3.2

Network Manager Client/ECT/CT Installation


If you install from CD, insert CD into the CD drive and installation will start automatically.
If you install from iso or zip file copy file into the PC, then extract/unzip and execute setup.exe program
found in this location and follow the instructions.
3.2.1

Installation of the Network Manager Client

Below is the license screen so choose the option as shown below.

User will be asked to choose the product which he/she wants to install on the system. So, you can
choose the product to be installed & just follow the instructions.
Tellabs Part No.: 76.6300-001

Page 5 of 18

6300 Client Installation Guide

Product Selection Dialog

Information Dialogue

Tellabs Part No.: 76.6300-001

Page 6 of 18

6300 Client Installation Guide

Destination Dialog

Server Details Dialog


Pls. provide actual server hostname or IP address instead of tmn_central

Tellabs Part No.: 76.6300-001

Page 7 of 18

6300 Client Installation Guide

Help Selection Dialog

Summary Dialog

Tellabs Part No.: 76.6300-001

Page 8 of 18

6300 Client Installation Guide

Setup Status Dialog

Win7 Firewall Modification Dialog


Tellabs Part No.: 76.6300-001

Page 9 of 18

6300 Client Installation Guide

Finish Dialog

Tellabs Part No.: 76.6300-001

Page 10 of 18

6300 Client Installation Guide

3.2.2

Installation of ECT/CT

Please note that you need to deinstall any previous ECT installed as upgrade to ECT/CT is not
supported.
Refer to Section 6 Deinstallation for further details.
Now after possible deinstalation of ECT/CT you click on the setup.exe and following screen will
appear:

Instance Choice Dialog


Now, click on the Install a new instance of this application radio button as shown in the snap shot
above, then click Next. The License Screen dialog will appear & the user will be shown the product
choice dialog again.

Tellabs Part No.: 76.6300-001

Page 11 of 18

6300 Client Installation Guide

Product Choice Dialog

Tellabs Part No.: 76.6300-001

Page 12 of 18

6300 Client Installation Guide

Some additional points to take care during ECT installation:

Security dialogue will ask to enable the ECT security or not. It is as per your requirements you
can choose yes or no.

Install help files; please select yes so that all 6300 Manuals would be available.

It will ask to configure the OsiTP4 details, choose the network connection option through which
you want to connect from the PC to the NEs through ECT. Pls. note that we strongly recommed
you to install OsiTP4 even if you only have IP DCN.

Press next after selecting.

Let it install OsiTP4 on your PC.

Tellabs Part No.: 76.6300-001

Page 13 of 18

6300 Client Installation Guide

3.2.3

Product Shortcuts in Start Menu

The new Shortcuts will be made under Tellabs Folder in All Programs
All Programs

Tellabs Tellabs 6300 Network Manager


Tellabs 6300 Extended Craft Terminal
Tellabs 6300 Craft Terminal

New Shortcuts
Note: Please delete the old shortcuts if not deleted during Uninstallation.

Tellabs Part No.: 76.6300-001

Page 14 of 18

6300 Client Installation Guide

3.2.4

Upgrade of installed product:

For Upgrade User can choose the second radio button (Maintain or update the instance of this
application selected below) and select the product to be upgraded.
Please note that this is supported for NM client only.

Instance Choice Dialog

Tellabs Part No.: 76.6300-001

Page 15 of 18

6300 Client Installation Guide

4 PPP Installation for CT


4.1

Access to the Network Elements through CT

You can access the Network Element in the following ways:

Use a direct PPP connection to the Tellabs 6325, 6340 FP4.0 or 6345/6350

Use a direct PPP connection to connect to the ETEX module


Note: If running version 2.2.1 or later of the ETEX, then the user id ctuser must be applied to the PPP
connection.

For other NE types use an S-LINK connection.

4.2

PPP Configuration (Windows XP/Windows7)

The PPP connection has to be manually installed and connected. Follow the procedure given in MA 336_O1
Section 1.3

4.3

Running the Craft Terminal

After the installation you will have the following menu added to your windows start menu:

Additionally the following icons will appear on the desktop.

Tellabs Part No.: 76.6300-001

Page 16 of 18

6300 Client Installation Guide

5 Configuration
5.1

Configuration of GUI timers

Changing a property in the \emgui\settings\registry.properties can control the default request timeout for the
Craft Terminal GUIs supporting Tellabs 6345/6350 and Tellabs 6340 FP4.0 or later:
dk.tellabs.ms.emgui.core.temipclient.TeMIPRequestFactory.DefaultTimeout = 300000

The default value is 300000 milliseconds, which is 5 minutes. It is strongly recommended not to set the
timer to a lower value than default.

5.2

Configuration of logs

Configuration of the Craft Terminal GUI logs is performed in the <Root Dir>\emgui\settings\log.properties
file on the Craft Terminal. The log.properties file also has properties that determine where the log files are
placed.
Server side logs are placed in <Root Dir>\CT\bin\logs.

Tellabs Part No.: 76.6300-001

Page 17 of 18

6300 Client Installation Guide

6 De-Installation
De-installation is performed as usual on Windows PCs by selecting Start-> Control Panel. Then activate the
Programs & Features, select the relevant product which you want to deinstall and click on uninstall button.
This starts the un-install wizard. Follow the instructions given by the wizard.
This procedure is similar for NM Client/ECT/CT/TeMIP client.

Tellabs Part No.: 76.6300-001

Page 18 of 18

Das könnte Ihnen auch gefallen