Beruflich Dokumente
Kultur Dokumente
Page
Topic
Page
Specifications
49
50
Pilot Lights
10
51
Selector Switches
11
51
16
Specifications
52
Push-Pull Operators
18
Approximate Dimensions
53
22
Momentary Multi-Operators
23
54
Reset Operators
26
55
27
Approximate Dimensions
56
28
Back-of-Panel Components
29
57
31
59
Legend Plates/Caps
32
61
Approximate Dimensions
33
66
39
67
40
70
800MB/MR Specifications
71
72
41
42
43
Specifications
45
Approximate Dimensions
47
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource
Description
Assembly Overview
Legend Plate
(Optional)
Latch
Operator
Mounting Ring
(Included with
Operator)
Contact Block(s)
and/or
Power Modules
Specifications
Front-of-Panel (Operators)
Mechanical Ratings
Description
Degree of protection
Tested at 102000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. for 3 hr duration, no damage
IP65/66 (Type 3/3R/4/12/13)
Flush/extended = 5 N, E-stop = 36 N
Mushroom = 9 N
Operating torque
(typical application with one contact block)
Mounting torque
Plastic
Metal
-25+70 C (-13+158 F)
-40+85 C (-40+185 F)
Humidity
Performance Data Performance data given in this publication is provided only as a guide for the user in determining suitability and do not constitute a
performance warranty of any kind. Such data may represent the results of accelerated testing at elevated stress levels, and the user is responsible for
correlating the data to actual application requirements. ALL WARRANTIES AS TO ACTUAL PERFORMANCE, WHETHER EXPRESS OR IMPLIED, ARE
EXPRESSLY DISCLAIMED.
Momentary mushroom operators are IP65. Plastic keyed operators are IP66, Type 4/13; not Type 4X.
Limit of four contact blocks max. for these devices.
Operating temperatures below 0 C (32 F) are based on the absence of freezing moisture and liquids, UL Recognized to 55 C (131 F) - Incandescent module
max. 40 C (104 F).
Back-of-Panel Components
Electrical Ratings
Screw Termination
A600, Q600
600V AC
A300, Q300
300V AC
24120V AC/DC
24V AC
24V DC
120V AC
240V AC
Range
Current Draw
Frequency
20132V AC/DC
1029V AC
1030V DC
102132V AC
204264V AC
15 mA (AC), 12 mA (DC)
31 mA
24 mA
6 mA
6 mA
50/60 Hz, DC
50/60 Hz
DC
50/60 Hz
50/60 Hz
Thermal current
#1814 AWG (0.751.5 mm2) One per spring clamp, two spring clamps per terminal
Shock
Tested at 1/2 cycle sine wave for 11 ms and no damage at 100 G max.
N.O.
N.O.E.M.
Contact operation
N.C.L.B.
N.C.E.B.
3.4 N
56.5 N
Illumination
Green
Red
White
525 nm
629 nm
Green
Red
White
780 mcd
780 mcd
360 mcd
2.6 W
Materials
Springs
Electrical contacts
Terminals
Silver-nickel
Low voltage
Screw
Brass
Spring-clamp
Silver-plated brass
Material Listing
Component
Material Used
Panel gasket
All operators
Nitrile, TPE
Diaphragm seal
K-seal
Nitrile
Stainless steel
Return spring II
PBT/polycarbonate blend
PBT/polycarbonate blend
Lens
Multi-function
Acetal
Lens, knob
Illuminated push button, illuminated momentary mushroom, illuminated selector switch Polyamide
Knob
Plastic bezel/bushing I
Glass-filled polyamide
Glass-filled PBT
Metal bezel/bushing
Zinc
Diffuser
Polycarbonate
Legend frames
Glass-filled polyamide
Glass-filled polyamide
Chromated zinc
Plastic latch
Glass-filled polyamide
Metal latch
Plastic enclosure
PBT/polycarbonate blend
Metal enclosure
Aluminum
Terminal screws
Terminals
Spring clamps
Stainless steel
Lamp socket
Incandescent module
Brass
Housing
Glass-filled polyamide
Low-voltage terminals
Contact blocks
Gold-plated silver-nickel
contacts
Low-voltage spanner
Contact blocks
Gold-plated silver-nickel
contacts
Spanner
Contact blocks
Boot
Flush Operator
Cat. No. 800FP-F3
Extended Operator
Cat. No. 800FM-E4
800F
Guarded Operator
Cat. No. 800FP-G6
P F
Operator Construction
Color Cap
Packaging
Code
Description
Code
Color
Code
Description
Orange
Blank
1 per package
White
BP
10 per package
Black
Green
b
Operator Type
Red
Yellow
Code
Description
Blue
Flush
Grey
Extended
No cap
Guarded
Assortment pack
Momentary Push Button Operators, Non-Illuminated with Two-Color Molded Legend Caps
Flush Operator
Cat. No. 800FP-F301
800F
P F
01
Operator Construction
Color Cap
Legend Text
Code
Description
Code
Color
Code
Text
Orange
Blank
No Text
White
01
START
Black
02
STOP
Green
05
Red
06
Yellow
08
Blue
b
Operator Type
Code
Description
09
Forward
Flush
10
Reverse
Extended
11
Guarded
For custom laser-engraved legend cap, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
White and yellow caps have black text. All other color caps have white text.
Legend button cap supplied loose for customer installation.
Available for flush only.
Valid color cap/legend text codes include:
Text
Extended
Caps
Color
Flush Caps
White
FORWARD,
REVERSE,
START, I, , R
Black
FORWARD,
REVERSE, , STOP, O, , R
R
,R
Green
FORWARD,
REVERSE,
START, I,
Red
FORWARD,
REVERSE,
STOP, O,
STOP, O,
Yellow
FORWARD,
REVERSE,
Blue
FORWARD,
REVERSE, ,
R
,R
Flush Operator
Cat. No. 800FM-LF4
Extended Operator
Cat. No. 800FP-LE3
800F
Guarded Operator
Cat. No. 800FP-LG3
P LE
Operator Construction
Color Cap
Packaging
Code
Description
Code
Color
Code
Description
Amber
Blank
1 per package
Green
BP
10 per package
Red
Yellow
Blue
b
Operator Type
Code
Description
LF
Flush
LE
Extended
LG
Guarded
Clear
No cap
For custom laser-engraved operator, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
When using LED for illumination, a white LED is recommended.
Only available with no color cap (9 from Table c).
Test
Essai
Prova
Teste
Ensayo
X2
X1
Cat _ _-Q7_
X2
X1
X3
X4
X1
X4
X2
X3
X3
L2, -
X4
X1
X3
AC
X4
Cat _ _-D _ C
X2
L1, +
X2
X1
Cat _ _-Q3_
L2
X4
6. . . 120V AC/DC
Cat _ _-N3_
L1
Signal
Segnale
Sinal
Senl
Cat _ _-N5_
Cat _ _-N7_
Cat _ _-Q5_
AC
DC
X3
X2
X4
X1
X3
X2
800F
M FA
a
3
c
Operator Construction
Operator Type
Color Cap
Code
Description
Code
Description
Code
Color
FA
Orange
White
Black
Green
Red
Yellow
Blue
No cap
Assortment pack
800F
P LFA
Operator Construction
Operator Type
Color Cap
Code
Description
Code
Description
Code
Color
LFA
Amber
Green
Red
Yellow
Blue
Clear
No lens
800F
P P
Operator Construction
Lens Cap
Packaging
Code
Description
Code
Color
Code
Description
Amber
Blank
1 per package
Green
BP
10 per package
Red
Yellow
Blue
b
Operator Type
Code
Description
Diffuser
Clear
No lens
For custom laser-engraved pilot light, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
When using LED for illumination, a white LED is recommended.
10
Standard Knob
Cat. No. 800FP-SM22
Knob Lever
Cat. No. 800FP-HM22
Switching Angle
Target Table and Operator Position
Contact Type
N.O.
N.C.
800F
P S
a
M2
Operator Construction
Operator Function
Orientation
Code
Description
Type
Code
Blank
Standard
90 offset
Code
M2
L2
Code
Description
Standard knob
Knob lever
R2
Operator Type
Spring return from right
(60 switching angle)
Description
Packaging
Code
Description
Blank
1 per package
BP
10 per package
d
Knob/Insert Color
Code
Knob Color
Insert Color
Black
White
30 mm hole spacing will not work if knob lever is used. See page 38 for recommended operator panel spacing.
For use in vertical mount Bul. 800F enclosures.
Not available with 90 offset orientation.
11
Standard Knob
Cat. No. 800FP-LSM26
Switching Angle
N.C.
800F
P LS
a
M2
b
c
Operator Construction
Operator Function
Knob/Insert Color
Code
Description
Code
Type
Code
Knob Color
Insert Color
Amber
White
Green
White
Red
White
Yellow
Black
Blue
White
Clear
Black
M2
L2
Operator Type
Code
Description
LS
Standard knob
LH
Knob lever
R2
e
Orientation
Code
LED module required for illumination, can not use incandescent module.
For use in vertical mount enclosures.
Crevices may exist on product that may be unsuitable for certain applications. Please consult your local
Rockwell Automation sales office or Allen-Bradley distributor.
Only available in clear.
Use of a white LED is recommended.
12
Description
Blank
Standard
90 offset
Standard Knob
Cat. No. 800FP-SM32
Knob Lever
Cat. No. 800FM-HM32
Switching Angle
Contact Type
Left
Right
Center
Center CL
Center CR
Left
Right
O
O
N.O.
Center
Center CL
Center CR
N.C.
800F
P S
a
M3
Operator Construction
Operator Function
Knob/Insert Color
Code
Description
Code
Description
Standard knob
Knob lever
Code
Knob Color
Insert Color
Black
White
M3
e
Orientation
Operator Type
Code
Type
Maintained
Code
Spring return from right
R3
Description
Blank
Standard
90 offset
f
Spring return from left and right
B3
30 mm hole spacing will not work if knob lever is used. See page 38 for recommended operator
panel spacing.
For use in vertical mount enclosures.
The center contact block can have the same target output as the left or right contact block, by
specifying center left (CL) or center right (CR) option.
Operation
Code
Description
Blank
Standard
CL
Center left
CR
Center right
13
Standard Knob
Cat. No. 800FP-LSM37
Switching Angle
Contact Type
N.O.
N.C.
Left
Right
Left
Right
800F
P LS
a
M3
Operator Construction
Operator Function
Knob/Insert Color
Code
Code
Description
M3
L3
Code
Knob Color
Insert Color
Maintained
Amber
White
Green
White
Red
White
Yellow
Black
Blue
White
Clear
Black
Type
R3
Operator Type
B3
Code
Description
LS
Standard knob
LH
Knob lever
e
Orientation
Code
LED module required for illumination, can not use incandescent module.
For use in vertical mount 800F enclosures.
Crevices may exist on product that may be unsuitable for certain applications. Please consult your
local Rockwell Automation sales office or Allen-Bradley distributor.
Only available in clear.
Use of a white LED is recommended.
14
Description
Blank
Standard
90 offset
Standard Knob
Cat. No. 800FP-SM42
Target Table and Operator Position
Contact
Type
N.O.
N.C.E.B.
N.C.L.B.
Position on
Mounting Latch
Left
Right
O
O
Center
Center CL
Center CR
Left
Right
Center CL
Center CR
Left
Right
X
X
Center
Center CL
Center CR
800F
P S
a
M4
Operator Construction
Operator Function
Orientation
Code
Description
Code
Description
Standard knob
Knob lever
Code
Blank
Standard
90 offset
M4
Description
b
Operator Type
Type
Maintained (45 switching angle)
Code
Operation
Knob/Insert Color
Code
Description
Code
Knob Color
Insert Color
Blank
Standard
Black
White
CL
Center left
CR
Center right
15
Switching Angle
N.C.
800F
M KM2
a
1
c
Operator Construction
Code
Description
Key Code
Code
Key No.
Blank
3825 (Standard)
455
01R
3801
02R
3802
03R
3803
Operator Type
04R
3804
05R
3805
3806
Code
Type
KM2
Maintained
(60 switching angle)
06R
27R
4001
KL2
28R
4002
4003
KR2
29R
30R
4004
31R
4005
32R
4006
33R
4007
c
Key Removal Position
Code
Position
Left
Right
Both
No Master Key
16
Switching Angle
Position on
Mounting Latch
Left
N.O.
Right
Center
Left
Right
Center
N.C.
800F
M KM3
a
3
c
Operator Construction
Operator Type
Code
Description
Code
KM3
Maintained
KR3
KL3
KB3
Description
Code
Type
Left
All
Center
Left/center
Center/right
d
Key removal in maintained positions only.
Keyed operators are IP66, Type 4/13.
Not intended for high security applications. Interoperability is possible with certain key/cylinder lock
combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for
interoperability information.
For replacement Ronis keys, consult your local Rockwell Automation sales office or Allen-Bradley
distributor.
Key removal position only valid with operator types 800F_-KM3 and 800F_-KL3.
17
2-Position Push-Pull Operators, Non-Illuminated Twist-to-Release (Trigger Action), Push-Pull (Trigger Action)
40 mm Trigger Action
Twist-to-Release Mushroom
Cat. No. 800FP-MT44
40 mm Trigger Action
Push-Pull Mushroom
Cat. No. 800FP-MP44
800F
P MT4
90 mm Half-Dome
Cat. No. 800FP-MP94
Operator Construction
Operator Type
Color Cap
Code
Description
Code
Type
Black
30 mm color cap
Green
MT3
MT4
40 mm color cap
Red
MT6
60 mm color cap
Yellow
Blue
Push, Twist-to-Release
Push-Pull
Code
Type
MP4
40 mm color cap
Half-Dome Push-Pull
Code
Type
MP9
90 mm color cap
Code
Color
d
Engraving
Code
Description
Blank
No engraving on cap
LE
EMO printed
All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.
E-Stop operators, latch, and contact block combinations have been third-party tested for B10d values. B10d values can be found in publication
SAFETY-SR001_-EN-E.
Only available with red color cap.
For EMO guards, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
Only available on 40 mm color cap.
Only available on red, 40 mm push, twist-to-release operator type (MT44).
Half-dome operators only available with black, red, and yellow color caps.
Limit of four contact blocks max. for these devices.
18
2-Position Push-Pull Operators, Illuminated Twist-to-Release (Trigger Action), Push-Pull (Trigger Action)
40 mm Illuminated Twist-to-Release
Cat. No. 800FP-LMT44
40 mm Mushroom Push/Pull
Cat. No. 800FM-LMP44
800F
P LMP4
90 mm Half-Dome
Cat. No. 800FP-LMP94
Operator Construction
Operator Type
Code
Description
Code
Color
Code
Type
Green
LMT4
40 mm color cap
Red
LMT6
60 mm color cap
Yellow
Blue
Push, Twist-to-Release
Push-Pull&
Code
Type
LMP3
30 mm color cap
LMP4
40 mm color cap
LMP6
60 mm color cap
Half-Dome Push-Pull&
Code
Type
LMP9
90 mm color cap
LED module required for illumination, can not use incandescent module.
All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.
E-Stop operators, latch, and contact block combinations have been third-party tested for B10d values. B10d values can be found in publication
SAFETY-SR001_-EN-E.
Only available with red color cap.
60 mm version has black arrows; 30 and 40 mm versions have white arrows.
Use of a white LED is recommended.
Only available with 40 mm Push-Pull color cap (LMP4 from Table b).
Half-dome operators only available with red and yellow lens cap colors.
& Limit of four contact blocks max. for these devices.
19
800F
P MK4
Operator Construction
Operator Type
Code
Description
Type
MK4
40 mm
Code
Color
Red
d
Ronis Key Lock
All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring
contact blocks.
E-Stop operators, latch, and contact block combinations have been third-party tested for B10d values.
B10d values can be found in publication SAFETY-SR001_-EN-E.
Keyed operators are IP66, Type 4/13.
Not intended for high security applications. Interoperability is possible with certain key/cylinder lock
combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for
interoperability information.
For replacement Ronis keys, consult your local Rockwell Automation sales office or Allen-Bradley
distributor.
20
Code
Key No.
Blank
3825 (Standard)
455
01R
3801
02R
3802
03R
3803
04R
3804
05R
3805
06R
3806
27R
4001
28R
4002
29R
4003
30R
4004
31R
4005
32R
4006
33R
4007
Contact Type
Out
Center
N.O.
N.C.E.B.
N.C.L.B.
In
800F
M L
a
MM
E3
Operator Construction
Operator Function
Cap Color
Code
Description
Code
Description
Code
Description
MM
Momentary out,
Maintained center,
Momentary in
Amber
Black
Green
b
Operator Type
Code
Description
Blank
Non-illuminated
Illuminated
MP
Momentary out,
Maintained center,
Maintained in
Red
Blue
Clear
Cap Size
Code
Description
40 mm plastic
Positions
Code
Description
E3
3-position
21
40 mm Mushroom
Cat. No. 800FM-MM42
60 mm Mushroom
Cat. No. 800FP-MM63
800F
90 mm Mushroom
Cat. No. 800FP-MM94
P MM4
Operator Construction
Color Cap
Code
Description
Code
Type
Code
MM4
40 mm momentary
Black
60 mm momentary
Green
MM6
MM9
90 mm momentary
Red
Yellow
Blue
Color
40 mm Mushroom
Cat. No. 800FP-LMM43
800F
P LMM4
Operator Construction
Code
Description
Code
Type
Code
Color
LMM4
40 mm momentary
Green
22
Red
Yellow
Blue
Clear
800F P U2
a
800F P U2
a
E
X
Operator Construction
Code
Description
Code
Description
Code
Description
White
White
Black
Black
Green
Green
Red
Red
Yellow
Yellow
b
Operator Type
Code
Description
U2
Two-function
Blue
Blue
Code
Description
Flush
Extended
e
Operator Type Position C
Code
Description
Flush
Extended
Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed
from the back) corresponds to position C of the operator.
For custom-engraved caps, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
Valid color cap/legend text codes include:
Text
Color
Flush Caps
White
START, I
Extended Caps
Black
STOP, O
Green
START, I
Red
STOP, O
23
800F P LU2
800F P LU2
Operator Construction
Code
Description
Code
Description
Code
Description
White
White
Black
Black
Green
Green
Red
Red
Yellow
Yellow
b
Operator Type
Code
Description
LU2
Two-function Illuminated
Blue
Blue
Code
Description
Flush
Extended
e
Operator Type Position C
Code
Description
Flush
Extended
LED module required for illumination, can not use incandescent module.
Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed
from the back) corresponds to position C of the operator. Position 3 of the latch (center position) is reserved for the power module.
For custom-engraved caps, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
Valid color cap/legend text codes include:
Text
24
Color
Flush Caps
White
START, I
Extended Caps
Black
STOP, O
Green
START, I
Red
STOP, O
800F P U3
a
800F P U3
a
E
X
d (cont'd)
f (cont'd)
Operator Construction
Code
Description
Code
Description
Code
Description
b
Operator Type
Code
Description
U3
Three-function
Description
Flush
Extended
Description
Code
Flush
Red
Extended
d
Description
White
Black
Green
Red
Yellow
Blue
g
Operator Color Cap/Text Position B
Code
e
Operator Type Position C
Description
Description
White
Black
Green
Red
Yellow
Blue
Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed
from the back) corresponds to position C of the operator. Position 3 of the latch (center position) corresponds to position B of the operator.
For custom-engraved caps, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
For no caps option, (position B) center cap available as red, no text only.
Valid color cap/legend text codes include:
Text
Color
Flush Caps
White
START, I
Extended Caps
Black
STOP, O
Green
START, I
Red
STOP, O
25
Reset Operator
Cat. No. 800FP-R611
800F
M R
a
11
Operator Construction
Operator Type
Color Cap
Code
Description
Code
Type
Code
Color
Reset
White
Black
Blue
Will accept latch and up to four single circuit contact blocks or two dual circuit contact blocks; no
contacts allowed in center position.
11 mm reset stroke length.
26
d
Legend Text
Code
Text
Blank
No text
11
Contact Type
Position on
Mounting Latch
Selector Left
Free
Selector Left
Depressed
Selector Right
Free
Selector Right
Depressed
O
N.O.
Left
N.O.
Right
N.O.
Center
N.C.
Left
N.C.
Right
N.C.
Center
Contact Type
Position on
Mounting Latch
Selector Left
Free
Selector Left
Depressed
Selector Right
Free
Selector Right
Depressed
O
N.O.
Left
N.O.
Right
N.O.
Center
N.C.
Left
N.C.
Right
N.C.
Center
800F
P SJ
Operator Construction
Operator Function
Code
Description
Code
Description
2-position
3-position
b
Operator Type
Code
Description
SJ
Selector jog
Color Cap
Code
Description
Black
Green
27
Contact Type
Position on
Mounting Latch
Toggle Left
Center
N.O.
Left
N.O.
Right
N.O.
Center
N.C.
Left
Toggle Right
N.C.
Right
N.C.
Center
Contact Type
Position on
Mounting Latch
Toggle Up
Toggle Left
Center
Toggle Right
Toggle Down
N.O.
Left
N.O.
Right
N.O.
Center
N.C.L.B.
Left
N.C.L.B.
Right
N.C.L.B.
Center
N.C.E.B.
Left
N.C.E.B.
Right
800F
M
a
M2
Operator Construction
Operator Type
Operator Function
Code
Description
Code
Description
Code
Description
Toggle switch
M2
2-position, maintained
R2
2-position, momentary
28
M4
4-position, maintained
R4
4-position, momentary
Back-of-Panel Components
Contact Blocks with Latch Composite
800F P
Style
Code
Description
Code
Description
Code
Description
Plastic latch
No contact
No contact
Metal latch
1 N.O.
1 N.C.
2 N.O.
2 N.C.
3 N.O.
3 N.C.
4 N.O.
4 N.C.
5 N.O.
5 N.C.
6 N.O.
6 N.C.
b
Contact Block(s) Termination Style
Code
Description
Screw termination
Spring-clamp termination
Description
Blank
Standard blocks
N.C. self-monitoring
800F M
a
Style
Voltage
Lamp Color
Code
Description
Code
Description
Code
Description
Plastic latch
No bulb
Incandescent
Metal latch
6V AC/DC
Red LED
12V AC/DC
Green LED
24V AC/DC
White LED
48V AC/DC
b
Power Module Type
Code
Description
120V AC
240V AC
LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, momentary push buttons, and momentary mushroom
operators only.
Four circuits maximum allowable when power module is used. Contact blocks cannot be stacked on power module.
Only available for incandescent module.
Only available for integrated LED module.
For best illumination results, LED color should match lens color. For yellow operator, select a white LED.
29
800F P
Style
Lamp Color
Code
Description
Code
Description
Code
Description
Plastic latch
Incandescent
No contact
Metal latch
Red LED
1 N.C.
Green LED
2 N.C.
White LED
3 N.C.
4 N.C.
b
Power Module Type
Code
Description
Code
X
Screw termination
Code
Description
Spring-clamp termination
Blank
Standard blocks
Code
Description
No bulb
6V AC/DC
12V AC/DC
24V AC/DC
48V AC/DC
120V AC
240V AC
Description
c
Voltage
Description
No contact
1 N.O.
2 N.O.
3 N.O.
4 N.O.
N.C. self-monitoring
Four circuits maximum allowable when power module is used. Contact blocks cannot be stacked on power module.
LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, push buttons, and momentary mushroom operators only.
Only available for incandescent module.
Only available for integrated LED module.
For best illuminated results, LED should match lens color. For yellow operator, select a white LED.
30
800F
Hole 1
(Hole 1 c+d)
3-Hole
Hole 2
(Hole 2 c+d)
800F
a
(Hole 1 c+d)
4-Hole
(Hole 2 c+d)
(Hole 3 c+d)
800F
a
(Hole 1 c+d)
(Hole 2 c+d)
(Hole 3 c+d)
(Hole 4 c+d)
Mounting Orientation
Color/Text
Code
Description
Code
Description
Code
Description
Vertical
White
Blank
No external I/O
Horizontal
Black
Green
Red
2 input
Yellow
2 output (sourcing)
Enclosure Style/Legends
Code
Description
2-hole/legend frames
3-hole/legend frames
4-hole/legend frames
Code
Blue
1 E-stop block
Clear
2 E-stop block
Grey
2 input/2 output
No cap
Amber
Operator Types
Description
Non-illuminated 40 mm mushroom
Potentiometer &
Illuminated 40 mm mushroom
Selector Switches in a vertical mount enclosure are mounted with a horizontal orientation.
Enclosure Style/Legend option H from Table b can only select one operator from Table c. Valid options
are L, M, and T. Also see footnote
Operator Types L, M, and T from Table c may be used as emergency stops. To be valid as an E-Stop,
operators must use color/text option 4 from Table d and it must be placed in the last hole position in
the enclosure, where a yellow round E-stop legend plate is provided. An E-Stop connector also must
be chosen from Table e. Also see footnote
Potentiometer allowed in first hole position only.
Available in flush only.
This is an 8-in/4-out device. 2-in and 1-out are assigned to each hole position in the enclosure. If a 2hole enclosure is selected, 4-in and 2-out are assigned internally and up to 4 unassigned I/O points can
be assigned to external connectors. This device contains up to two physical external I/O connectors.
The "+" symbol in the Description field of table e indicates that two external connectors exist. If an EStop connector is used, 2 unassigned I/O points can be assigned to the other connector.
External I/O Versions F, L, M, Q, and U receive only one contact block for the external E-Stop string.
These connectors are rated 3 A. If more than 3 A of current is needed or if there are two E-Stop
strings, use External I/O Versions G, N, P, R, and W. These versions receive two contact blocks. This
allows for 6 A of switching or for two E-Stop strings.
Cannot be ordered with "No Cap" (9 from Table d - Color/Text).
& Operator Types K, L, M, T, and U from Table c are not available with legend frames.
# Only available with non-illuminated push-pull operator (M from Table c).
31
800F AF
a
01
Color Cap
Code
Description
Code
Description
AF
Flush
White
Code
Description
AE
Extended
Black
01
START
Green
02
STOP
Red
05
Yellow
06
Blue
08
09
FORWARD
10
REVERSE
11
English
Text
Color
Flush Caps
Extended Caps
White
, R
STOP, O, , R
Black
FORWARD, REVERSE, , R
Green
Red
STOP, O,
Yellow
FORWARD, REVERSE,
Blue
FORWARD, REVERSE, , R
, R
800F 15YS
a
Size/Color (Yellow)
Text
Code
Description
Code
15Y
60 mm round
(30.5 mm mounting hole)
15YS
60 mm round
(22.5 mm mounting hole)
16Y
90 mm round
(22.5 mm mounting hole)
b (cont'd)
Text
Description
Code
Description
Blank
No text
W112
E112
EMERGENCY STOP
A112
NDSTOP
F112
ARRT DURGENCE
S112
PARO DE EMERGENCIA
B112
G112
NOT HALT
T112
ARRESTO EMERGENZA
N112
P112
PARADA DE EMERGENCIA
Sold only multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.
Not for use with base mounted contact blocks.
Not available on 15YS version.
Text printed on the 15Y version only.
& Text printed on the 15YS & 16Y versions only.
D112
M112
NOODSTOP
NOT HALT, ARRESTO EMERGENZA,
ARRT DURGENCE
EMERGENCY STOP, ARRT
DURGENCE, NOT HALT&
L112
NEYARSTOPP, NEYARSTOPP
H112
800F A
C
a
Type
Color
Code
Description
Code
Description
Amber
White
FA
Black
FAU
Green
EAU
Red
FCU
Yellow
ECU
Blue
32
Approximate Dimensions
Dimensions in millimeters. Dimensions are not intended to be used for manufacturing purposes. Refer to RAISE software for additional dimensional information.
Non-Illuminated Guarded,
Illuminated and Non-Illuminated
Alternate Action Push Button Operators
90 mm Half Dome
90 mm Mushroom
30.1
26
89.8
89.9
40 mm
39.8
60 mm
59.8
30
Operator
33
Dimensions in millimeters. Dimensions are not intended to be used for manufacturing purposes.
Potentiometer Operator
Non-Illuminated 3-Position
Multi-Function Operators
22.5
29.6
34
Operator
30 mm
30.0
40 mm
40.0
60 mm
60.0
Dimensions in millimeters. Dimensions are not intended to be used for manufacturing purposes.
Back-of-Panel Components
Incandescent Module with Latch
Back-of-Panel Components
LED Module with Latch
Back-of-Panel Components
Contact Cartridges with Latch
Back-of-Panel Components
Dual Circuit Contact Block or
Self Monitoring Contact Block
(Max. of 1 Deep)
23.1
Max.
Min.
a
( Dia.)
6.4
(0.252)
5.9
(0.232)
5.7
(0.224)
b
(Length)
24
(0.945)
32
(1.26)
14
(0.551)
40
35
Dimensions in millimeters. Dimensions are not intended to be used for manufacturing purposes.
90 mm Round Legend
30 x 60 mm
Snap-In Legend Plate
40
Special Multi-Function
Snap-In Legend Plate
Trim Washer
Anti-Rotation Washer
Hole Plug
1.3
3.12
36
66
29.6
36
Dimensions in millimeters. Dimensions are not intended to be used for manufacturing purposes.
Locking Cover
41.6
52.4
57
54.2
41
42.7
54.2
20.2
33
33.5
43
52.6
54.2
69.4
22.4
54.2
19.5
38
Narrow Guard
Protective Ring
46.2
42.2
Plastic Guard
44.4
3.3
24.3
22.5
88
37
Dimensions in millimeters. Dimensions are not intended to be used for manufacturing purposes.
Pendant Stations
Plastic Enclosures
W
D
L
Cat. No.
800F-1P
800F-1Y
800F1YD
Mounting Holes
No. of
Holes
85
89
58
58
59
Instruction Sheet
+0,2
85
89
74
58
65
102.5
800F-2P
124
79
58
31
48
800F-3P
155
79
58
31
48
133
800F-4P
186
79
58
31
48
164.5
800F-6P
248
87
64
31
55
224
OPTIONAL
EN OPTION
OPTIONAL
OPCIONAL
OPZIONALE
3,2 0
mm
+0,4
24,1 0
+0,4
22,3 0
40
60
EM
GE
ER N
CY
Metal Enclosures
ST OP
60, 90
40
50
40
50
40 / 60
50 / 60
70
50
30
50
60 / 90
48
30
40 / 60
1- 4,8 mm
1- 2,8 mm
5 "Clic"
4
"Clic"
"Clic"
"Clic"
PLASTIC
PLASTIK
PLASTIQUE
PLSTICO
PLSTICA
1,7 Nm
15 lb-in
2
1- 6 mm
1- 4 mm
7 mm
Mounting
Holes
Cat. No.
No. of Holes
800F-1M
99
62
800F-2M
137
37.5
100
800F-3M
174
37.5
137
800F-5M
249
37.5
212
38
4,4 Nm
40 lb-in
METAL
METALL
MTAL
METALLO
2
1
3
0,6 mm
3,5 mm
8 mm
M3,5
0,7 - 0,9 Nm
6 - 8 lb-in
1,2 Nm
10 lb-in
Cat. No.
Connector Style /
No. of Pins
Location 1
800F-1YMQ53V
AC Micro / 5-pin
BX01V
BX01V
800F-1YMQA
AC Micro / 6-pin
BX01
BX01
BX10
800F-NX1
BX01
1/4
2/3
800F-1YMQ1
BX01
1/4
2/3
BX10V
BX01V
800F-1YMQ2
DC Micro / 4-pin
A to B to
Pin # Pin #
Location 2
C to D to
Pin # Pin #
Location 3
E to F to G to
Pin # Pin # Pin #
800F-1YMQ3
BX01V
BX01V
800F-1YMQ3VEG
BX01V
BX01V
BX01V
BX01V
BX01
800F-1YMQ3V
800F-1YMQ41
800F-1YMQ44
DC Micro / 5-pin
Mini Receptacle / 4-pin
BX10
BX01
BN3R
800F-1YMQ4
BX10
BX01
BN3R
800F-1YMQ5
BX10
BX01
BN5R
800F-1YMQ6
BX10
BX01
BN7R
BX10
BX01
BN3R
800F-1MYMQ5
BX10
BX01
BN5R
800F-1MYMQ6
BX10
BX01
BN7R
800F-1MYMQ4
J = Jumper
39
Bulletin
598
Description
Features
Dimensions [mm]
1-Hole: 110 x 80 x 85
2-Hole: 130 x 80 x 85
3-Hole: 180 x 80 x 85
4-Hole: 250 x 80 x 85
Type 1, 4, 4X, 12, 13
IP66
Indoor/Outdoor
Degree of Protection
Storage Temperature Range
-40+75 C (-40+158 F)
-40+55 C (-40+131 F)
Material
Enclosure
Gasket
Foam-in-place polyutherane
Standards
Certifications
cULus, CE
Technical Specifications
Product Certification
cULus Listed (File No. E54866; Guide
No. NITW, NITW7), CE Marked
Approvals/Certifications
Degree of Protection
-40+75 C (-40+158 F)
-40+55 C (-40+131 F)
Material
40
Enclosure
Gasket
Foam-in-place polyurethane
The 1-, 2-, and 3-speed operators can be mounted with either our
standard Cat. No. 800F-ALP latch or a mechanical interlocking
latch (Cat. No. 800FC-ALP).
For the 3-hole enclosure, the mechanical interlock can only be
located in positions 2 & 3, with the black operator being located in
position 2 and the white operator being located in position 3.
For the 5-9-hole enclosures, the mechanical interlock can be
located in any two adjacent positions. For the 5-9-hole
enclosures, the white operator will be located in position X of the
mechanical interlock and the black operator will be located in
position X+1 of the mechanical interlock.
Position X
Pos.
2
Pos.
3
Multi-Operator
Position X+1
MultiOperator
Position 1
Position 1
Position 1
Position 1
Position 3
Position 2
.
.
.
.
Position 5
.
.
.
.
.
Position 7
.
.
.
.
.
.
Position 9
3-Hole Enclosure
5-Hole Enclosure
7-Hole Enclosure
9-Hole Enclosure
Operator in Position 1 is mounted horizontal, contact blocks are horizontal. Operators in Positions 2 & 3 are mounted vertical, contact blocks are vertical.
Operators in all positions are mounted horizontal, contact blocks are horizontal.
41
800FP C A
a
1 U243
b
Operator Type
Symbol
Code
Description
2-speed
3-speed
U100
b
Description
White
Black
FORWARD
RIGHT
White with
Black Arrow
White with
Black Arrow
Black with
White Arrow
Blank
Blank
Blank
Blank
DOWN
UP
U243
RIGHT
LEFT
REVERSE
FORWARD
FORWARD
REVERSE
DOWN
U246
Horizontal Mounting
Black with
White Arrow
U241
U700
LEFT
RIGHT
UP
U261
DOWN FAST
UP FAST
U263
RIGHT FAST
LEFT FAST
REVERSE
FAST
FORWARD
FAST
REVERSE
FAST
DOWN FAST
U264
UP
A, B, C
Description
Vertical Mounting
One-Speed Operators
U244
Cap Color
Code
Valid with
Code
Table a
Selections:
U266
FORWARD
FAST
U260
LEFT FAST
RIGHT FAST
UP FAST
Two-Speed Operators
2-speed
DOWN
U271
2-speed UP
U273
U274
2-speed
REVERSE
2-speed
FORWARD
2-speed
FORWARD
2-speed
REVERSE
2-speed UP
2-speed
DOWN
U276
U270
Three-Speed Operators
DOWN
REVERSE
LEFT
U291
3-speed
DOWN
3-speed UP
U293
3-speed
REVERSE
3-speed
FORWARD
U294
U296
U290
3-speed
FORWARD
3-speed
REVERSE
3-speed UP
3-speed
DOWN
Note: Please consult your local Rockwell Automation sales office or Allen-Bradley distributor for proper
latch and contact block configurations.
Text (DOWN, UP, LEFT, etc.) indicates arrow direction. Text is not printed on operators.
Cat. No. 800F-ALP (standard latch) and Cat. No. 800FC-ALP (mechanical interlock latch) can be
used with these operators.
Booted style of operators for pendant stations.
42
800FC
a
b1
Pos. 1
c1
d1
Pos. 2
Pos. 3
3-9-hole
e1
Pos. 4
f1
Pos. 5
g1
h1
Pos. 6
Pos. 7
5-9-hole
j1
Pos. 8
k1
Pos. 9
Note: A code from Tables bk and b1k1 must be specified for each operator to create a valid cat. no.
Voltage
12
24V AC/DC
120V AC
24V AC/DC
120V AC
Legend
Plate
No
Yes
bk
Enclosure Code
Operator Type
3-Hole
5-Hole
7-Hole
9-Hole
Code
Code
Code
Code
AB
AD
AL
A1
Description
A2
AF
Enclosure code is always required. Voltage is used to select LEDs for
illuminated operators. Standard contact blocks are used for both 24V and
120V enclosures.
Only available in position 1 of a 3-hole enclosure and in positions 1 & 2 of a
5-9-hole enclosure.
Monolithic style device provided.
For a 3-hole enclosure, when a mechanical interlock (c1 & d1 = M or B) is
selected with a 1-3-speed operator, the black operator will be located in
position 2 of the enclosure and the opposite white operator will be placed in
position 3 of the enclosure (Example: ABMAFM or BDMBUM).
For a 5-...9-hole enclosure, when a mechanical interlock (b1k1 = M or B)
is selected with a 1-3-speed operator, the white operator will be located
in position X of the mechanical interlock and the opposite black operator
will be placed in position X+1 of the mechanical interlock (Example:
AFMABM or BUMBDM).
Interlock and/or rubber boot selection = N (no interlock, no additional
boots) is not allowed.
Interlock and/or rubber boot selection = E (electrical interlock, no additional
boots) is not allowed.
Interlock and/or rubber boot selection = M (mechanical interlock) is not
allowed.
Interlock and/or rubber boot selection = B (electrical and mechanical
interlock) is not allowed.
Interlock and/or rubber boot selection = R (no interlock, additional rubber
boot) is not allowed.
& Interlock and/or rubber boot selection = S (electrical interlock, additional
rubber boot) is not allowed.
# Only available in position 1 for a 3-hole enclosure, positions 1 and/or 5 for a
5-hole enclosure, positions 1 and/or 7 for a 7-hole enclosure, and positions
1 and/or 9 for a 9-hole enclosure.
11 For proper installation, a trim washer or Cat. No. 800F-36_ legend plate
must be installed with this operator.
12
AR
AU
Description
Black operator with double arrow
(reverse fast down/left)
Black operator with double arrow
(down fast)
Black operator with double arrow
(left fast)
White operator with double arrow
(forward fast up/right)
White operator with double arrow
(right fast)
White operator with double arrow
(up fast)
DB
DD
DL
DF
DR
DU
Description
B2
BB
BD
BL
B1
BF
BR
BU
Code
N
E
M
B
R
S
Code
Description
b1k1
C2
CB
Description
No interlock, no additional boots
Electrical interlock, no additional boots
Mechanical interlock, boots standard
Electrical and mechanical interlock, boots standard
No interlock, additional rubber boot
Electrical interlock, additional rubber boot
CD
CL
C1
CF
CR
CU
43
bk, continued
Operator Type
Code
Description
MT
ME
MK
MM
MG
bk, continued
Operator Type
Legend Plate Text
(When Selected)
VV
Not provided
Description
E2
ED
EL
FD
FL
EB
FU
FR
FB
E1
EU
ER
EF
FF
E3
EQ
EN
E4
ES
E5
EA
E6
R6
Description
L3
L4
L5
L6
L7
Selector Switches&
Code
SH
KH
SJ
KJ
Description
2-position
3-position
Standard-maintained
Keyed-maintained
Standard-maintained
Keyed-maintained
44
VW
VX
Code
WV
WW
WX
XV
XW
XX
YV
YW
YX
Description
Not provided
Pilot Lights&
Code
Description
P0
P3
P4
P5
P6
P7
Amber LED
Green LED
Red LED
Yellow LED
Blue LED
Clear LED
Potentiometers&#
Code
Description
1P
2P
3P
4P
5P
6P
Hole Plug&
Code
Description
N2
O-I
b1k1
I-O-II
Description
No interlock, no additional boots
Electrical interlock, no additional boots
Mechanical interlock, boots standard
Electrical and mechanical interlock, boots standard
No interlock, additional rubber boot
Electrical interlock, additional rubber boot
Specifications
Front-of-Panel (Operators)
Mechanical Ratings
Description
Tested at 102000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. for 3 hr duration, no damage
Shock
Degree of protection
Flush/extended = 5 N, E-stop = 36 N
Operating torque
(typical application with one contact block)
Mounting torque
-25+70 C (-13+158 F)
-40+85 C (-40+185 F)
Humidity
Product Certifications
Certifications
Standards Compliance
Terminal Identification
EN/IEC 60947-1
RoHS
Material Listing
Component
Material Used
Panel gasket
All operators
Nitrile, TPE
Diaphragm seal
K-seal
Nitrile
Stainless steel
Return spring II
Button cap
PBT/polycarbonate blend
PBT/polycarbonate blend
Lens
Multi-function
Acetal
Lens, knob
Polyamide
Knob
Glass-filled polyamide
Plastic bezel/bushing I
Non-illuminated push button, illuminated push button, selector switch, key selector switch,
push/twist-to-release E-stop, key E-stop, multi-function
Glass-filled polyamide
Plastic bezel/bushing II
Pilot light
Glass-filled PBT
Diffuser
Polycarbonate
Glass-filled polyamide
Plastic latch
Glass-filled polyamide
Glass-filled polyamide
Plastic enclosure
PBT/polycarbonate blend
Terminal screws
Terminals
Housing
LED module
Glass-filled polyamide
Low-voltage terminals
Contact blocks
Low-voltage spanner
Contact blocks
Spanner
Contact blocks
Boot
Illuminated push button, non-illuminated push button, multi-function illuminated and nonilluminated
45
Back-of-Panel Components
Electrical Ratings
A600, Q600
600V AC
AC 15, DC 13 to IEC/EN 60947-5-1 and UL 508, 17V, 5 mA min.
5V, 1 mA DC min.
C300, R150, AC 15, DC 13 to EN 60947-5-1 and UL 508
Range
24V AC
24V DC
120V AC
240V AC
Current Draw
1029V AC
1030V DC
70132V AC
180264V AC
Thermal current
31
24
25
22
Frequency
mA
mA
mA
mA
50/60 Hz
DC
50/60 Hz
50/60 Hz
#1814 AWG (0.751.5 mm2) One per spring clamp, two spring clamps per terminal
Shock
Tested at 1/2 cycle sine wave for 11 ms and no damage at 100 G max.
N.O.
N.C.
N.O.E.M.
Contact operation
N.C.L.B.
N.C.E.B.
N.O.E.E.M.
N.O.L.M.
N.O.E.E.M.
3 mm (0.12 in.)
N.C.E.B.
4 mm (0.16 in.)
N.O.L.M.
Operating forces (typical)
7 mm (0.28 in.)
3.4 N
56.5 N
Illumination
Green
Red
Yellow
Blue
White
525 nm
629 nm
590 nm
470 nm
Green
Red
Yellow
Blue
White
780
780
600
168
360
mcd
mcd
mcd
mcd
mcd
Materials
Springs
Electrical contacts
Terminals
Silver-nickel
Low voltage
Screw
Brass
Spring-clamp
Silver-plated brass
46
Approximate Dimensions
Bul. 800FC 1-, 2-, and 3-Speed Operator
35.6
13.6
52
31.4
76
8
Cat. No.
No. of Holes
800FC-4/5/C/D
309
36
800FC-6/7/E/F
381
36
800FC-8/9/G/H
453
36
91
8
36
250
104
34
33
78
73
47
Order/Item __________________________________
Vertical Mounting
Horizontal Mounting
48
800FD F
01
11
Operator Type
Legend Text
Termination Style
Code
Description
Code
Text
Code
Description
Flush
No text (blank)
Standard screw
Extended
01
START
Ring lug
02
STOP
05
Color Cap
Code
Color
White
Black
Green
Red
Yellow
Blue
e
Contact Module
06
08
09
FORWARD
10
REVERSE
11
Code
Number of N.O.
Number of N.C.
01
10
11
02
20
Text
Color
Flush Caps
White
Extended Caps
,R
Black
, FORWARD, REVERSE, R
STOP, O, , R
Green
Red
, FORWARD, REVERSE
STOP, O,
Yellow
, FORWARD, REVERSE
Blue
, FORWARD, REVERSE, R
,R
"STOP" or "O" color cap/legend text are not available for "10" or "20" contact modules.
49
800FD P
7
b
Lens Cap
Voltage
Termination Style
Code
Color
Code
Type
Code
Description
Amber
24V AC/DC
Blank
Standard screw
Green
120V AC
Ring lug
Red
240V AC
Yellow
Blue
Clear
800FD P
5
b
Lens Cap
Voltage
Termination Style
Code
Color
Code
Type
Code
Description
Amber
No Bulb
Blank
Standard screw
Green
6V AC/DC
Ring lug
Red
12V AC/DC
Yellow
24V AC/DC
Blue
48V AC/DC
Clear
120V AC/DC
No lens
50
800FD S
11
Operator Function
Termination Style
Contact Module
Code
Description
Code
Description
Code
Number of N.O.
Number of N.C.
M2
Maintained, 2-position
Standard screw
01
L2
Ring lug
10
R2
11
M3
Maintained, 3-position
02
L3
20
R3
B3
Knob
Position
Contacts/
Contact
Position
Left
Right
Left
Right
Contacts/
Contact
Position
Left
Right
Left
Right
Left
01
11
10
02
11
20
02
20
Right
800FD MT4
11
Color Cap
Termination Style
Contact Module
Code
Description
Code
Description
Code
Number of N.O.
Number of N.C.
Black
Standard screw
01
Green
Ring lug
11
Red
02
4E
Red - EMO
Yellow
Blue
2
E-stops must contain at least one N.C. circuit.
All E-stop operators are EN/ISO 13850 compliant when using at least one N.C. contact block.
E-Stop operators, latch, and contact block combinations have been third-party tested for B10d values.
B10d values can be found in publication SAFETY-SR001_-EN-E.
51
Specifications
Mechanical Ratings
Tested at 102000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. for 3 hr duration, no
damage
Degree of protection
Mechanical durability per EN
60947-5-1 (Annex C)
Push-pull/twist-to-release E-stop
Operating forces
E-stop = 36 N
Operating torque
(typical application with one contact block)
N.O.
Contact operation
N.C.
N.O.
N.C.
-25+60 C (-13+140 F)
-40+85 C (-40+185 F)
Humidity
24V AC
24V DC
120V AC
240V AC
Thermal current
Range
Current Draw
2026V AC
1830V DC
102132V AC
204264V AC
32
24
22
22
mA
mA
mA
mA
300V
#1814 AWG (0.752.5 mm2)
Max. (2) #14 AWG, uses same size wire only
6.35 mm (0.250 in.) Max. outer diameter with 3.8 mm (0.148 in.) hole diameter
Green
525 nm
Red
629 nm
Yellow
590 nm
Blue
470 nm
White
Green
780 mcd
Red
780 mcd
Yellow
600 mcd
Blue
168 mcd
White
360 mcd
2.6 W
52
50/60 Hz
DC
50/60 Hz
50/60 Hz
Frequency
Specifications, Continued
Materials
Springs
Electrical contacts
Terminals
Panel gasket
Acrylic
Bezel/bushing, housing
Glass-filled polyester
Legend frames
Glass-filled polyamide
Mounting ring
Glass-filled polyamide
Seal
Nitrile
Terminal screws
Polyester/polycarbonate blend
Lamp socket
Terminal identification
EN/IEC 60947-1
Approximate Dimensions
Dimensions in millimeters. Dimensions are not intended to be used for manufacturing purposes. Refer to RAISE software for additional
dimensional information.
Instruction Sheet
+0,2
3,2 0
mm
+0,4
24,1 0
+0,4
0
22,3
2-Position Push-Pull/Twist- A
to-Release Mushroom
B
Operators
GE
ER N
CY
EM
11.3
OPTION
WAHL
OPZIONE
OPO
OPCIN
ST OP
60, 90
30
40
50
40
50
60 / 90
40
30
1- 7,3 mm
1- 9,3 mm
PLASTIC
PLASTIQUE
PLASTIK
PLASTICA
PLSTICO
1,7 Nm
15 lb-in
1
2
1- 10,5 mm
Plastic Enclosures
1- 8,5 mm
7 mm
or
ou
oder
o
2
1
0,7 - 0,9 Nm
6 - 8 lb-in
3,8 mm
6,35 mm
50 mm
Plastic Enclosures
Cat. No.
800FD-1P
800FD-1PY
No. of Units
(Holes)
1
Weight
72
(2-27/32)
59
(2-5/16)
41
(1-5/8)
95 g
(3.5 oz)
53
Specifications
Mechanical Ratings
Vibration (assembled to panel)
Tested at 102000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. for 6 hr duration, no damage
Shock
Degree of protection
Selector switch
Twist-to-release E-stop
Extended = 58 N
E-stop = 1416 N
Mounting torque
-25+55 C (-13+131 F)
-40+70 C (-40+158 F)
Humidity
Shock
Tested at 1/2 cycle sine wave for 11 ms and no damage at 100 G max.
Contact durability
Contact operation
Snap action
Slow make/break
positive opening
N.C.
N.O.
Slow make/break
1224V AC
1224V DC
120V AC
Current
Frequency
12 mA
12 mA
9 mA
50/60 Hz
DC
50/60 Hz
Ith = 5 A (AC), Ith = 1 A (DC)
Thermal current
Insulation voltage (Ui)
300V
Stab termination
2.8 X 0.5 mm
1500V 1 min.
Illumination
LED Dominant wavelength
Green
Red
White
525 nm
624 nm
Green
Red
White
500 mcd
400 mcd
1000 mcd
Certifications
Standards Compliance
Terminal Identification
EN/IEC 60947-1
RoHS Compliant
1.2 W
Materials
Springs
Electrical contacts
Stab terminals
Lenses
54
Optional
Contact
Block
Location
Top
800B-PS11
Bottom
N.O.
N.C.
N.O.
Top
NA
Bottom
N.C.
O
X
Bottom
800B-PT11
N.C.
800B-PS22
800B-PT02
NA
N.C.
N.O.
Top
800B-PT01
Top
Bottom
N.C.
Top
N.O.
Bottom
N.C.
55
Approximate Dimensions
Round
Hole Patterns
Round & Square
Rectangle
18
18
12
24
1.7 +0
-0.1
42.4
54.4
18
18
16 +0.2
-0
18
15 +0.1
-0
42.4
14
Large Square
Emergency Stop
40
24
56.4
36
24
18
40
12.3
42.4
54.7
Max 18.0
13.65 0.20
42.4
54.4
12
18
0.30
18
Max 18.0
4.25 0.20
12.0 0.12
6.0 0.12
14.4 0.12
18
Max 10.0
Rectangle
24
42.4
54.4
12
10 - 1.10
24
Large Square
24
42.4
54.4
12
26
Emergency Stop
42.4
30
72.4
56
7.2 0.12
0.87
800MR A
Operator Type
Button Color
Contact Block
Termination Type
Code
Description
Code
Description
Code
Description
Flush head
Green
Blank
No contacts
Extended head
Black
1 N.O. - 1 N.C.
Mushroom head
Orange
A2
2 N.O.
Grey
A3
1 N.O.E.M. - 1 N.C.L.B.
White
A4
2 N.C.
Red
A7
1 N.C.L.B. - 1 N.C.
Blue
2 N.O. - 2 N.C.
Yellow
D1
1 N.O.
D2
1 N.C.
Code
Description
Blank
Stab terminals
Large screw
57
800MR PA
a
24
Operator
Input Voltage
Full Voltage
Transformer
Code
Description
Code
Description
Code
Description
Blank
No contacts
1 N.O. - 1 N.C.
PA
Flush
12
12V AC/DC
PB
Extended
24
24V AC/DC
A2
2 N.O.
PMB
Mushroom
10
120V AC
A3
1 N.O.E.M. - 1 N.C.L.B.
Transformer
Full Voltage
Code
Description
Code
Description
A4
2 N.C.
A7
1 N.C.L.B. - 1 N.C.
QA
Flush
16
120V AC 50/60 Hz
2 N.O. - 2 N.C.
QB
Extended
26
240V AC 50/60 Hz
D1
1 N.O.
QMB
Mushroom
D2
1 N.C.
b
Illumination Options
Lens Color
Code
Color
Amber
Code
Description
Blank
Blue
Clear
LED
Green
Red
White
Blank
f
Contact Block
Termination Type
Code
Description
Blank
Stab terminals
Large screw
LEDs available in red, green, amber, blue, and white. LED color must match lens color, except clear lens supplied with
white LED and white lens supplied with amber LED.
Only available with LED Illumination option.
Only available with full voltage power module option and standard stab terminations.
Guards must be ordered separately.
Logic Reed and small screw blocks must be ordered separately.
58
2-Position Push-Pull
Cat. No. 800MR-FX6A
800MR FX
2-Position Push-Pull/Twist
Cat. No. 800MR-FXT6A4
800MR FX
b1
(2-Position)
f
(3-Position)
Operator Type
Operator
Contact Cartridges
Code
Description
Code
Color
Code
Description
FX
Push-pull unit
Blank
Non-illuminated
Blank
No contacts
1 N.O. - 1 N.C.
A2
2 N.O.
Operator Function
Button Color
A4
2 N.C.
Code
Color
A7
1 N.C.L.B. - 1 N.C.
2-Position
Code
Description
Green
2 N.O. - 2 N.C.
Blank
Maintained push-pull
Black
D1
1 N.O.
Twist-release
Orange
D2
Grey
White
b1
Operator Function
Red
3-Position
Blue
Operator Position
Yellow
Code
Description
Blank
No cap
Blank
Stab terminals
Large screw
Code
1 N.C.
Note: See Table 1 for Target description.
Out
Center
In
Momentary
Maintained
Momentary
3-Position
Contact
Description
Code
Code
Out
In
Out
Center
In
Blank
No contacts
Blank
D1
N.O.
D2
N.C.
O
X
X
O
N.O. N.C.
O
X
O
O
X
O
A2
O
O
X
X
N.O. N.O.
O
O
O
O
X
X
A2
A4
X
X
O
O
N.C. N.C.
X
X
O
O
O
O
A4
N.C. N.C.L.B.
X
X
O
X
O
O
A7
O
X
O
X
X
O
X
O
N.O. N.C.
N.O. N.C.
O
X
O
X
O
O
O
O
X
O
X
O
59
2-Position Push-Pull and Push-Pull/Twist Release and 3-Position Push-Pull Units, Illuminated
800MR FX
a
800MR FX
a
b1
16
16
(2-Position)
h
(3-Position)
Operator Type
Operator Type
Button Color
Code
Description
Code
Description
Code
Color
FX
Push-pull unit
Transformer
Amber
Full voltage
b
Operator Function
2-Position
Illumination Options
Code
Description
Code
Description
Blank
Maintained
Blank
Incandescent lamp
Twist-release
LED
b1
Blue
Clear
Green
Red
White
No cap
Operator Function
Voltage
3-Position
Full Voltage
Operator Position
Code
B
C
Out
Center
In
Momentary
Maintained
Momentary
Contact Cartridges
Code
Description
12
12V AC/DC
24
24V AC/DC
10
120V AC
Transformer
Description
Code
16
120V AC 50/60 Hz
26
240V AC 50/60 Hz
2-Position
Code
Description
Blank
No contacts
1 N.O. - 1 N.C.
A2
2 N.O.
A4
2 N.C.
A7
1.N.C.L.B. - 1 N.C.
2 N.O. - 2 N.C.
D1
1 N.O.
D2
1 N.C.
3-Position
Contact
Description
Code
Out
In
Blank
D1
D2
O
X
A2
A4
Code
Out
Center
In
No contacts
Blank
N.O.
N.C.
X
O
N.O. N.C.
O
X
O
O
X
O
O
O
X
X
N.O. N.O.
O
O
O
O
X
X
A2
X
X
O
O
N.C. N.C.
X
X
O
O
O
O
A4
X
X
O
X
O
O
A7
O
X
O
X
O
O
O
O
X
O
X
O
N.C. N.C.L.B.
O
X
O
X
X
O
X
O
N.O. N.C.
N.O. N.C.
Description
Blank
Stab terminals
Large screw
60
800MR H
e1
e1
800MR H
a
31
b
c1
c2
(Selector Switch)
(Cylinder Lock)
f
e1
c2
Operator Positions
Contact Cartridges
Key Codes
Code
Description
Code
Key No.
Master Key
Code
Description
Blank
T100 (standard)
1T
Blank
No contacts
02
T101
1T
1 N.O. - 1 N.C.
03
T102
1T
A2
2 N.O.
04
T106
1T
A4
2 N.C.
05
T107
1T
2 N.O. - 2 N.C.
07
T109
2T
D1
1 N.O.
08
T134
2T
D2
1 N.C.
09
T135
2T
P1
3 N.O.
10
T136
2T
P2
3 N.C.
14
T147
2T
P3
2 N.O. - 1 N.C.
P4
2 N.C. - 1 N.O.
P5
4 N.O.
P6
4 N.C.
P7
3 N.O. - 1 N.C.
P8
1 N.O. - 3 N.C.
b
Operator Color and Type
Standard Knob
Code
Description
No knob
Black
Knob Lever
Code
Description
No knob lever
Black
Cam Type
Cylinder Lock
Code
Description
Blank
Key
Code
Description
B cam
Operator Function
Code
Description
Standard Knob
Blank
Left
Code
Description
Maintained
f
Contact Block Termination Type
Code
Description
Blank
Stab terminals
Large screw
c1
Operator Function
Maintained
Code
Description
Spring Returned
From Left
31
Lock in left
N.C.
N.O.
32
Lock in right
N.O.
N.C.
33
Lock in both
Spring Return From Left
Code
Description
42
Lock in right
Spring Return From Right
Code
Description
48
Lock in left
61
800MR
800MR
e1
d
c2
e1
J
a
a
41
b
c1
c2
Operator Positions
(Selector Switch)
(Cylinder Lock)
f
e1
Key Codes
Contact Cartridges
Code
Description
Code
Key No.
Code
Blank
T100 (standard)
Blank
02
T101
1 N.O.-1 N.C.
03
T102
A3
1 N.O.E.M.-1 N.C.L.B.
1T Master Series
b
Operator Color and Type
Stan
dard
Knob
Description
Code
Standard
Description
Left side
Right side
No contacts
04
T106
Knob
Lever
05
T107
P1
2 N.O.
1 N.O.
P2
2 N.C.
1 N.C.
Code
Code
Key No.
P3
2 N.O.
1 N.C.
07
T109
P4
2 N.C.
1 N.O.
2 N.O.
2T Master Series
1 N.O.-1 N.C.
No knob
Black
08
T134
P5
2 N.O.
Blank
Key
Blank
09
T135
P6
2 N.C.
2 N.C.
10
T136
14
T147
c
Operator Function
Code
P7
2 N.O.
1 N.O. 1 N.C.
P8
2 N.C.
1 N.O. 1 N.C.
Cam Type
P9
1 N.O.
1 N.C.
T1
1 N.O. 1 N.C.
1 N.C.
Description
Maintained
Code
Description
B cam
K cam
P cam
U cam
c1
Operator Function/Locking Position
Maintained
Code
Description
41
Lock in left
Code
Description
42
Lock in center
Blank
43
Lock in right
Left
44
Right
45
46
47
Description
50
Lock in center
52
Lock in right
51
69
Lock in left
38
Lock in center
73
Code
Description
631
Lock in center
62
Large screw
Description
Stab terminals
Code
Blank
Cam Description
Left
Side
Right
Side
Left
Side
P
Right
Side
Left
Side
U
Right
Side
Left
Side
Right
Side
N.O.
N.O.
N.O.
N.O.
N.O.
N.C.
N.C.
N.O.
N.C.
N.O.
N.O.
N.O.E.M. N.O.E.M.
N.C.L.B.
N.O.E.M.
N.C.L.B.
N.C.
N.C.L.B.
N.C.L.B.
N.C.L.B.
N.C.L.B.
N.C.
N.C.
N.C.
N.C.
800MR N
800MR
N
a
31
b
c1
c2
(Selector Switch)
(Cylinder Lock)
c1
Operator Positions
Standard Key
Code
Description
4-position selector
Code
Description
31
Lock in position 1
32
Lock in position 2
33
Lock in position 3
b
Operator Color and Type
Stan
dard
Knob
Description
Code
Contact Type
(Rear View)
Target
34
Lock in position 4
Knob
Lever
41
42
Code
43
Left
Right
1 N.O.
1 N.C.
1 N.O.
1 N.C.
No knob
44
Black
45
Blank
Key
Blank
46
Contact Cartridges
51
52
Code
Description
53
Blank
No contacts
54
2 N.O. - 2 N.C.
61
c
Operator Function
Code
Description
Maintained
c2
Description
Code
Key No.
Master Key
Blank
Stab terminals
Blank
T100 (standard)
1T
Large screw
02
T101
1T
03
T102
1T
04
T106
1T
05
T107
1T
07
T109
2T
08
T134
2T
09
T135
2T
10
T136
2T
14
T147
2T
Key Codes
63
800MR 24
a
d
d
g1
g2
a
Input Voltage
Illumination Options
Full Voltage
Code
Description
Contact Cartridges
Description
Code
Description
Blank
Incandescent
Code
12
12V AC/DC
LED
Blank
24
24V AC/DC
10
120V AC
e
Operator Function
Transformer
Code
Description
16
120V AC 50/60 Hz
26
240V AC 50/60 Hz
b
Description
2-position
3-position
Knob
Lever
Code
X
No knob
Red
Green
Amber
Clear
A4
2 N.C.
1 N.O.-1 N.C.
1 N.O.-1 N.C.
D1
1 N.O.
D2
1 N.C.
P1
2 N.O.
1 N.O.
P2
2 N.C.
1 N.C.
P3
2 N.O.
1 N.C.
P4
2 N.C.
1 N.O.
P5
2 N.O.
2 N.O.
f1
P6
2 N.C.
2 N.C.
P7
2 N.O.
1 N.O.-1 N.C.
1 N.O.-1 N.C.
Code
Description
B cam
P8
2 N.C.
Code
Description
P9
1 N.O.
1 N.C
B cam
T1
1 N.O.-1 N.C.
1 N.C.
K cam
P cam
U cam
g1
Code
Description
Blank
Right
N.C.
N.O.
N.O.
N.C.
B
Spring Return
From
Left
2 N.O.
1 N.O.E.M.1 N.C.L.B.
Operator Function
1 N.O.-1 N.C.
Maintained and
Spring
Return From
Right
A3
Target
Code
A
A2
Maintained
Description
Description
Right side
No contacts
Left side
Code
Operator Positions
Code
h
g2
Code
Description
Blank
Stab terminals
Large screw
Left
Side
Right
Side
Left
Side
P
Right
Side
Left
Side
Left
Side
Right
Side
N.O.
N.O.
N.O.
N.O.
N.O.
N.C.
N.C.
N.O.
N.C.
N.O.
N.O.
N.O.E.M.
N.O.E.M.
N.C.L.B.
N.O.E.M.
N.C.L.B.
N.C.
N.C.L.B.
N.C.L.B.
N.C.L.B.
N.C.L.B.
N.C.
N.C.
N.C.
N.C.
64
U
Right
Side
800MR 24
a
Input Voltage
Illumination Options
Contact Cartridges
Code
Description
Code
Description
Blank
Incandescent
Code
Description
12
12V AC/DC
LED
2 N.O. - 2 N.C.
24
24V AC/DC
10
120V AC
Full Voltage
Operator Function
Code
Code
Description
Operator Positions
Maintained
Blank
Stab terminals
Code
Description
4-position
Code
c
Stan
dard
Knob
Standard Block
Contact Type
(Rear View)
Target
Knob
Lever
Code
Left
Right
1 N.O.
No knob
1 N.C.
Red
1 N.O.
1 N.C.
Green
Amber
Clear
65
Pilot Light
Cat. No. 800MR-Q24R
800MR P
24
Operator
Input Voltage
Lens Color
Transformer
Code
Full Voltage
Description
Code
Description
Code
Color
Blank
No lens
Amber
Pilot light
12
12V AC/DC
PDT
24
24V AC/DC
Blue
PT
10
120V AC
Clear
Green
Full Voltage
Transformer
Code
Description
Code
Description
Red
Pilot light
16
120V AC 50/60 Hz
White
QT
26
240V AC 50/60 Hz
Illumination Options
Pilot Lights
Code
Description
Code
Description
Blank
Incandescent
Blank
Stab terminals
LED
Large screw
LEDs available in red, green, amber, blue, and white. LED color must match lens color, except clear lens
supplied with white LED and white lens supplied with amber LED.
Only available with LED illumination option.
Small screw contact blocks must be ordered separately.
Only available with Push-to-test units.
800MR M1
Operator Type
Contact Cartridges
Code
Description
Code
Description
Code
Description
M1
Wobble stick
Blank
No contacts
Blank
Stab terminals
1 N.O. - 1 N.C.
Large screw
2 N.O. - 2 N.C.
66
Bul. 800MB
Momentary Contact Push Button Units, Non-Illuminated
800 MB CA
a
Bezel Color
Color Insert
Contact Block(s)
Code
Color
Code
Color
MB
Black
No color insert
Code
Description
Green
Blank
No contacts
Orange
D1
1 N.O.
Grey
D2
1 N.C.
White
1 N.O. - 1 N.C.
Red
A2
2 N.O.
Blue
A4
2 N.C.
Yellow
A7
1 N.C.L.B. - 1 N.C.
2 N.O. - 2 N.C.
b
Operator Type
Code
Description
CA
Flush head
CB
Extended head
Standard
Description
Blank
Stab terminals
Large screw
67
800 MB CQ
a
06
Bezel Color
Voltage
Contact Block(s)
Code
Color
MB
Black
b
Power Module Type
Code
Description
CQ
Full voltage
CP
Transformer
Full Voltage
Description
Code
Description
12
12V AC/DC
Blank
No contacts
24
24V AC/DC
D1
1 N.O.
10
120V AC
D2
1 N.C.
1 N.O. - 1 N.C.
2 N.O.
Transformer
Code
Description
A2
16
120V AC
A4
2 N.C.
26
240V AC
A7
1 N.C.L.B. - 1 N.C.
2 N.O. - 2 N.C.
Operator Type
Code
Description
Flush
Extended
d
Illumination Options
Standard
Code
Color Insert
Code
Color
Blank
No contacts
Code
Description
Blank
Stab terminals
Amber
Large screw
Blue
Code
Description
Blank
Incandescent
Clear
LED
Green
Red
Red flush head push buttons are not suitable for applications requiring extended head or other unguarded buttons capable of being operated quickly in
emergencies, and they may not comply with applicable codes or standards.
Grey bezels can be ordered separately.
LEDs are only available in red, green, amber, and white; lens color must match LED color.
White LED available in 24V AC/DC only.
LED only.
Packet of colored inserts, one of each color. Not available with LED option for illuminated devices.
Only available with full voltage illumination option and standard stab terminations.
Logic Reed and small screw contact blocks must be ordered separately.
68
800
MB DB16
a
Bezel Color
Contact Blocks
Legend Options
Code
Description
MB
Black
b
Operator Type
Code
Description
DB16
Standard
Code
Description
Blank
No contact
2 N.O. - 2 N.C.
d
Contact Block Termination Type
Code
Description
Blank
Stab terminals
Large screw
Code
Description
Blank
Upper Blank
Lower Blank
50
Upper ON
Lower OFF
64
Upper START
Lower STOP
69
Pilot Light
Cat. No. 800MB-CQ24RS
800 MB CP
a
24
Bezel Color
Illumination Options
Lens Color
Code
Color
Code
Description
Code
Color
MB
Black
Blank
Incandescent
b
Power Module Type
LED
Push-to-test
Blue
TL
Clear/white
Green
Red
Code
Description
CP
Transformer
CQ
Full voltage
Voltage
Full Voltage
Termination Type
Code
Description
12
12V AC/DC
24
24V AC/DC
Code
Description
10
120V AC
Blank
Stab terminals
Pilot Lights
Transformer
Code
Description
Code
Description
16
120V AC
Blank
Stab terminals
26
240V AC
Large screw
LEDs are only available in red, green, amber, and white; lens color must match LED color.
LED only.
Packet of colored inserts, one of each color. Not available with LED illumination option.
Only available with full voltage power module and standard stab terminations.
Grey bezel can be ordered separately.
Small screw contact blocks must be ordered separately.
70
Specifications
Electrical Ratings
Contact Ratings
Dielectric Strength
Shock
1/2 cycle sine wave for 11 milliseconds 25 G (contact fragility) and no damage at 100 G
Degree of Protection
Potentiometers
Contact Operation
Typical Operating Forces
Operators without contact blocks
2.45 lb (10.8 N)
Push-Pull Units
Contact Blocks
Temperature Range
Operating
32131 F (055 C)
Storage
-40+185 F (-40+85 C)
Note: Operating temperatures at +32 F (0 C) are based on the absence of freezing moisture and liquids.
Humidity
Certifications
UL Listed File: E14840,
E10314
Guide: NKCR, NOIV
CSA Certified: LR1234, LR11924
IEC Compliance, IEC 529
th
(IEC 337-1) (NEMA ICS 2-125) Maximum continuous current I 10 A. Bulletin 800M units have control circuit ratings with 800M contact
blocks as follows:
Maximum
Operational
Volts Ue
AC 300
Utilization Category
IEC
AC-II
A300
Volts Ue
Make
Break
120300
7200 VA
720 VA
72120
60 VA
720 VA
2472
60 A
10 A
For applications below 24V and 24 mA, Logic Reed contacts are recommended.
Wire Capacity
Stab Termination Contact Blocks
Accepts two 0.110 x 0.032 in. push-on connectors or one 0.250 x 0.032 in. push-on connector.
Small Screw Contact Blocks
Accepts one #14 or two #16 AWG solid or stranded wires.
Large Screw Termination Contact Blocks
Accepts two #12 AWG solid or stranded wires.
71
Approximate Dimensions
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Extende
Head O
Round Push Button
Flush, Extended and
Illuminated Extended
Panel Wobble
Stick Unit
Round Push-Pull
Twist or Pull
Release Units
Sq.
Unguarded
Bezel
Guarded
Bezel
Square Backlit
with Guarded Bezel
Square Backlit
with Unguarded Bezel
72
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Contact Block
Terminals
Transformer
Terminals
Push
Button
Pilot
Light
Sel.
Switch
Cyl. Lock
Pot.
Push-Pull
or Twist
Release
Push
Button
Pilot
Light
Sel.
Switch
Cyl. Lock
Pot.
Push-Pull
or Twist
Release
2-1/4
(57.2)
2-15/32
(62.7)
3-1/2
(88.9)
2-1/32
(51.6)
2-3/4
(69.8)
2-5/16
(59)
2-17/32
(64.3)
3-9/16
(90.5)
2-1/32
(51.6)
2-13/16
(71.4)
Full Voltage
2-1/4
(57.2)
2-1/4
(57.2)
2-15/32
(62.7)
2-3/4
(69.8)
2-25/32
(70.6)
2-25/32
(70.6)
2-17/32
(64.3)
2-13/16
(71.4)
Transformer
2-23/32
(69.1)
2-23/32
(69.1)
2-29/32
(73.8)
3-3/32
(78.6)
2-25/32
(70.6)
2-25/32
(70.6)
2-31/32
(75.4)
3-5/32
(80.1)
Illuminated
2-45/64
(68.6)
2-59/64
(74.2)
3-15/16
(100)
3-13/64
(81.4)
Full Voltage
3-11/64
(80.6)
3-11/64
(80.6)
3-23/64
(85.3)
3-13/64
(81.4)
Transformer
3-11/64
(80.6)
3-11/64
(80.6)
3-23/64
(85.3)
3-35/64
(90.1)
Illuminated
73
Preferred
Dia.
Minimum
Vertical
Spacing
Large screw terminal contact blocks require a minimum vertical spacing of 1-37/64 in. (40 mm); selector switches with wing lever knobs require 2-1/4 in.
(57.1 mm) vertical and horizontal minimum spacing and large round legend plates require 1-1/2 in. (38.1 mm) minimum spacing.
Shipping Weights in Ounces (kg)
Type of Unit
Weight
Non-Illuminated
Push Buttons
Illuminated
Pilot Lights
Cylinder Lock
3-1/4 (0.09)
Full Voltage
3-1/2 (0.10)
Transformer
5 (0.14)
Pilot Light
2-1/4 (0.06)
Push-to-Test
3 (0.09)
Pilot Light
4-1/2 (0.13)
Push-to-Test
5 (0.14)
6 (0.17)
Type of Unit
Selector
Switches
Weight
Non-Illuminated
Illuminated
Full Voltage
4 (0.11)
Transformer
5-1/2 (0.16)
Non-Illuminated
Push-Pull Units
Illuminated
Potentiometer Units
4 (0.11)
4-1/2 (0.13)
Full Voltage
4-1/2 (0.13)
Transformer
5-1/2 (0.16)
4 (0.11)
Padlocking Cover
Cat. No. 800MR-N6
When using a padlocking cover and depending upon the types of adjacent units involved, the minimum vertical or horizontal spacing may have to be increased
for operating clearance.
74
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Legend Plates
Small
Legend
Plate
Standard
Legend Plate
Large Size
Round
Large
Legend
Plate
Small/Large
Legend Plate
The Bulletin 800MR large half round legend plates are not recommended for use with the twist-release units because of the operator knob size. The legend
plate is virtually unreadable. Push-pull units can be mounted in a 1-1/4 in. minimum horizontal spacing when no legend plate is used. Vertical spacing is
1-1/2 in. when the Bulletin 800MR large half round legend plate is used.
These Bulletin 800MR legend plates consist of Bulletin 800T legend plates with Cat. No. 800MR-N50 adapter rings.
75
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this
document, complete this form, publication RA-DU002, available at http://www.rockwellautomation.com/literature/.
Allen-Bradley, Rockwell Software, Rockwell Automation, and LISTEN. THINK. SOLVE are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6 34752 erenky, stanbul, Tel: +90 (216) 5698400