Beruflich Dokumente
Kultur Dokumente
Click the Add New Group Name button to define a group named BASE.
Click the OK button to assign the selected elements to the group named BASE.
Note: The BASE group will be useful for determining base shears, overturning
moments, total vertical loads.
52. Click the Save Model button
menu to save the file.
Step 6
49
Part C. Tutorial Part 1 - Creating, Analyzing and Designing the Basic Model
4. Click in the window labeled X-Y Plane @ Z=0 to make sure it is active. Note when
the window is active, its title bar will be highlighted.
5. Click the Up One Gridline button
level plan at Z=24.
8. In the window labeled X-Y Plane @ Z=24, click on frame elements 40, 45, 46 and 51
to select them (see Figure C-15).
Note: You can refer to Figure C-15, Figures B-2 and B-3, as well as the screen,
to identify the frame element numbers.
Step 7
51
52
Step 7
Part C. Tutorial Part 1 - Creating, Analyzing and Designing the Basic Model
16. In the plan view, click on frame elements 43 and 48 to select them.
17. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
18. In the Frame Sections area click on the W21X44 name once to highlight it and then
click the OK button.
19. From the Select menu select Select and then Groups from the submenu. This will
display the Select Groups dialog box.
20. Click on the group name FRMGIRD once to highlight it and then click the OK
button.
21. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
22. In the Frame Sections area click on the W24X55 name once to highlight it and then
click the OK button.
23. Click the Show Undeformed Shape button
to clear the display of the assigned
sections so that you can see the frame element labels again.
24. Click in the window labeled X-Y Plane @ Z=24 to make sure it is active.
25. Click the Down One Gridline button
floor plan at Z=12.
26. From the Select menu select Select and then Labels from the submenu. This will
display the Select by Labels dialog box.
27. Click the Element Type drop-down box and select Frame.
Type 15 in the Start Label edit box, 24 in the End Label edit box and 9 in the
Increment edit box.
28. From the Assign menu select Frame and then Sections from the submenu. This
will display the Define Frame Sections dialog box.
Step 7
53