Beruflich Dokumente
Kultur Dokumente
LED TV*
* LG LED TV applies LCD screen
with LED backlights.
Please read this manual carefully before operating your set and retain it
for future reference.
42LB6300 47LB6350
47LB6300 55LB6350
50LB6300
55LB6300
60LB6300
65LB6300
*MFL68027904*
42LB6500 60LB7100
47LB6500 65LB7100
50LB6500 70LB7100
55LB6500
60LB6500
55LB7200
www.lg.com
P/NO : MFL68027904 (1403-REV02)
The
lightning flash with arrowhead symbol,
WARNING/CAUTION
within an equilateral triangle, is intended to
alert the user to the presence of
uninsulated dangerous voltage within the
products enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
WARNING/CAUTION
ENGLISH
ENG
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING
CAUTION
NOTE
Short-circuit
Breaker
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Short-circuit
Breaker
Power Supply
Power Supply
ENGLISH
ENG
Ground Clamp
Electric Service
Equipment
yyGrounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire to
prevent possible electric shock (i.e. Power
a TVSupply
with a
three-prong grounded ACShort-circuit
plug
must be connected
Breaker
to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not
try to ground the unit by connecting it to telephone
wires, lightning rods, or gas pipes.
Short-circuit
Breaker
Power Supply
ENGLISH
ENG
Ground Clamp
yyCleaning
When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the TV
as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners or benzine.
yyMoving
Make sure the product is turned off, unplugged and
all cables have been removed. It may take 2 or more
people to carry larger TVs. Do not press or put stress
on the front panel of the TV.
yyVentilation
Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other materials
while plugged. Do not install in excessively dusty
places.
yyIf you smell smoke or other odors coming from the
TV, unplug the power cord and contact an authorized
service center.
yyKeep the product away from direct sunlight.
yyNever touch this apparatus or antenna during a
thunder or lightning storm.
yyWhen mounting a TV on the wall, make sure not to
install the TV by hanging the power and signal cables
on the back of the TV.
yyDo not allow an impact shock or any objects to fall
into the product, and do not drop anything onto the
screen.
yyDisconnecting the Main Power
The power outlet used with this device must remain
easily accessible.
yyStore the accessories (battery, etc.) in a safe location
out of the reach of children.
yyThis apparatus use batteries. In your community
there might be regulations that require you to dispose
of these batteries properly due to environmental
considerations. Please contact your local authorities
for disposal or recycling information.
yyDo not dispose of batteries in a fire.
yyDo not short circuit, disassemble or allow the
batteries to overheat.
FCC NOTICE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the users authority to operate the equipment.
ENGLISH
ENG
yyDot Defect
The Plasma or LCD panel is a high technology
product with resolution of two million to six million
pixels. In a very few cases, you could see fine dots
on the screen while youre viewing the TV. Those
dots are deactivated pixels and do not affect the
performance and reliability of the TV.
yyGenerated Sound
Cracking noise A cracking noise that occurs when
watching or turning off the TV is generated by plastic
thermal contraction due to temperature and humidity.
This noise is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing A low level
noise is generated from a high-speed switching
circuit, which supplies a large amount of current
to operate a product. It varies depending upon the
product.
This generated sound does not affect the
performance and reliability of the product.
yyTake care not to touch the ventilation openings.
When watching the TV for a long period, the
ventilation openings may become hot. This does
not affect the performance of the product or cause
defects in the product.
yyDo not install this product on a wall if it could be
exposed to oil or oil mist. This may damage the
product and cause it to fall.
yyIf the TV feels cold to the touch, there may be a small
flicker when it is turned on. This is normal, there is
nothing wrong with TV. Some minute dot defects
may be visible on the screen, appearing as tiny red,
green, or blue spots. However, they have no adverse
effect on the TVs performance. Avoid touching the
LCD screen or holding your finger(s) against it for
long periods of time. Doing so may produce some
temporary distortion effects on the screen.
Viewing 3D Imaging
(For 3D models)
WARNING
Viewing Environment
yyViewing Time
- When watching 3D contents, take 5 to
15 minute breaks every hour. Viewing 3D
contents for a long period of time may cause
headache, dizziness, fatigue or eye strain.
ENGLISH
ENG
CAUTION
Viewing Environment
yyViewing Distance
- Maintain a distance of at least twice the
screen diagonal length when watching 3D
contents. If you feel discomfort in viewing
3D contents, move further away from the TV.
Viewing Age
yyInfants / Children
- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.
- Children under the age of 10 may overreact
and become overly excited because their
vision is in development (for example: trying
to touch the screen or trying to jump into
it. Special monitoring and extra attention is
required for children watching 3D contents.
- Children have greater binocular disparity of
3D presentations than adults because the
distance between the eyes is shorter than
one of adults. Therefore they will perceive
more stereoscopic depth compared to
adults for the same 3D image.
yyTeenagers
- Teenagers under the age of 19 may be
stimulated to light coming from 3D videos.
Advise them not to watch 3D videos for a
long time when they are tired.
yyElderly
- The elderly may perceive less of a 3D
effect than the youth. Do not sit closer to
the TV than the recommended distance.
LICENSES
Supported licenses may differ by model.
For more information about licenses, visit www.lg.com .
ENGLISH
ENG
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the
cost of performing such distribution (such as the cost of media, shipping and handling) upon email
request to opensource@lge.com . This offer is valid for three (3) years from the date on which you
purchased the product.
TABLE OF CONTENTS
TABLE OF CONTENTS
2
IMPORTANT SAFETY
INSTRUCTIONS
31
Viewing 3D Imaging
(For 3D models)
32
32
32
LICENSES
33
34
SPECIFICATIONS
TABLE OF CONTENTS
37
INSTALLATION PROCEDURE
ENGLISH
ENG
9
11
12
13
14
15
15
17
18
19
Unpacking
Optional Extras
Parts and Buttons
- Using the Joystick button
Lifting and Moving the TV
Setting Up the TV
- Attaching the Stand
- Mounting on a Table
- Tidying Cables
- Mounting on a Wall
21
MAKING CONNECTIONS
21
22
22
23
24
25
26
27
27
29
29
30
38
MAINTENANCE
38
38
38
Cleaning Your TV
- Screen, Frame, Cabinet, and Stand
- Power Cord
38
TROUBLESHOOTING
NOTE
yyImage shown may differ from your TV.
yyYour TVs OSD (On Screen Display) may
differ slightly from that shown in this
manual.
yyThe available menus and options may
differ from the input source or product
model that you are using.
yyNew features may be added to this TV in
the future.
INSTALLATION PROCEDURE
1
Open the package and make sure all the accessories are included.
* When the TV is turned on for the first time after being shipped from the factory, initialization of
the TV may take up to one minute.
CAUTION
yyDo not use any unapproved items to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty.
yyIn case of some model, the thin film on screen is a part of TV, So dont take it off.
NOTE
yyThe items supplied with your product may vary depending upon the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
(0.39 inches) thick and 18 mm (0.7 inches) width.
yyUse an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not
fit into your TVs USB port.
*A
*B
10 mm (0.39 inches)
18 mm (0.7 inches)
ENGLISH
ENG
Check your product box for the following items. If there are any missing accessories, contact the
local dealer where you purchased your product. The illustrations in this manual may differ from the
actual product and item.
10
Magic Remote,
Batteries (AA)
(See page 31.)
Owners Manual
P P
Power Cord
(Depending upon model)
Tag On
Tag On
(Depending upon model)
Stand Screws
4 EA, M4 x L14
(See page 15, 16.)
ENGLISH
ENG
Cable Holder
(Depending upon model)
(See page 18.)
Cable Management
2 EA
(See page 18.)
(For 42/47/50/55LB6300,
47/55LB6350,
42/47/50/55LB6500)
(For 60/65LB6300,
60LB6500,
60/65/70LB7100,
55LB7200)
Stand Base
(See page 16.)
Cinema 3D Glasses
The number of 3D glasses
may differ depending upon
the model or country.
11
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturers circumstances or policies.
AN-MR500
Magic Remote
AG-F***
Cinema 3D Glasses
(Depending upon model)
AN-VC5**
Video Call Camera
AG-F***DP
Dual Play Glasses
(Depending upon model)
LG Audio Device
Tag On
AN-WF500
Wi-Fi/Bluetooth DONGLE
(Depending upon model)
ENGLISH
ENG
12
Screen
Speakers
Joystick Button2
Remote Control Sensor and
Intelligent Sensor1
Screen
Joystick Button2
Speakers
Power Indicator
ENGLISH
ENG
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding
environment.
NOTE
yyRemoving the protective film on the bottom of the TV
(Depending upon model)
When the TV is installed, peel the film off the bottom of the
cabinet.
13
Basic functions
Power On
When the TV is turned off, place your finger on the joystick button and press
it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick button and press
it once for a few seconds and release it.
Volume Control
If you place your finger over the joystick button and move it left or right, you
can adjust the volume level you want.
Channels Control
If you place your finger over the joystick button and move it up or down, you
can scrolls through the saved channels you want.
CLOSE
INPUT
ENGLISH
ENG
NOTE
y When your finger over the joystick button and push it up, down, left or right, be careful not to
press the joystick button. If you press the joystick button first, you can not adjust the volume
level and saved channels.
14
CAUTION
yyAvoid touching the screen at all times, as
this may result in damage to the screen.
yyDo not place the product on the floor with
its front facing down without padding.
Failure to do so may result in damage to
the screen.
yyIt is recommended to move the TV in the
box or packing material that the TV originally
came in.
yyBefore moving or lifting the TV, disconnect
the power cord and all cables.
yyWhen holding the TV, the screen should
face away from you to avoid damage.
ENGLISH
ENG
yyHold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
15
Setting Up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
CAUTION
yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the
TV may tilt forward after being installed.)
yyDo not tighten the screws with too much force; otherwise they may be damaged and come
loose later.
NOTE
yyRemove the stand before installing the TV on a wall mount by performing the stand attachment
in reverse.
ENGLISH
ENG
4 EA
M4 x L14
Stand Base/
Stand Body
A stand base
B stand base
1
A
ttach the stand to the TV using the upper
mounting hole on the back of the TV.
16
4 EA
M4 x L14
Stand Base
A stand base
B stand base
ENGLISH
ENG
A
ttach the stand to the TV using the upper
mounting hole on the back of the TV.
(optional)
(Depending upon model)
yyImage shown may differ from your TV.
The Kensington security system connector is
located at the rear of the TV.
For more information of installation and
using, refer to the manual provided with the
Kensington security system or visit http://www.
kensington.com .
Connect the Kensington security system cable
between the TV and a table.
NOTE
yyThe Kensington security system is optional.
You can obtain additional accessories from
your local dealer.
Mounting on a Table
17
10 cm
(4 inches)
10 cm
10 cm
m
10 c
CAUTION
yyDo not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
yyMake sure that children do not climb on
or hang on the TV.
NOTE
yyUse a platform or cabinet that is strong
and large enough to support the TV
securely.
yyBrackets, bolts, and ropes are optional.
You can obtain additional accessories
from your local dealer.
ENGLISH
ENG
1
2 Connect the power cord to a wall outlet.
18
Tidying Cables
Cable Holder
ENGLISH
ENG
Cable
Management
Cable
Management
Cable Holder
(For 70LB7100)
CAUTION
yyDo not move the TV by holding the cable
holder and cable management, as the
cable holders may break, and injuries and
damage to the TV may occur.
Cable Holder
Cable
Management
CAUTION
yyDo not move the TV by holding the cable
holder and cable management, as the
cable holders may break, and injuries and
damage to the TV may occur.
Mounting on a Wall
An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the
wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall
perpendicular to the floor. If you are attaching
the TV to other building materials, please
contact qualified personnel to install the wall
mount. Detailed instructions will be included
with the wall mount. We recommend that you
use an LG brand wall mount. When you do not
use LGs wall mount bracket, please use a wall
mount bracket where the device is adequately
secured to the wall with enough space to allow
connectivity to external devices.
Model
60/65LB6300
60LB6500
60/65LB7100
55LB7200
VESA (A x B)
400 x 400
19
A
B
Standard screw
M6
Number of screws 4
Wall mount bracket LSW440B
(optional)
Model
70LB7100
VESA (A x B)
600 x 400
A
B
10 cm
10 cm
10 cm
Standard screw
M6
Number of screws 4
Wall mount bracket LSW640B
(optional)
Wall mount bracket (optional)
LSW440B
Model
42/47/50/55LB6300
47/55LB6350
42/47/50/55LB6500
LSW640B
VESA (A x B)
400 x 400
MSW240
A
B
Standard screw
M6
Number of screws 4
Wall mount bracket MSW240
(optional)
LSW440B
ENGLISH
ENG
10 cm
(4 inches)
20
CAUTION
yyDisconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yyIf you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yyDo not over tighten the screws as this
may cause damage to the TV and void
your warranty.
yyUse the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the
warranty.
NOTE
ENGLISH
ENG
Wall Mount
Spacers
MAKING CONNECTIONS
21
MAKING CONNECTIONS
yyThis section uses illustrations of the LB7100 series.
You can connect various external devices to the TV. Supported external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external
devices. For more information on external devices connection, refer to the manual provided with
each device.
NOTE
yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal
input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
yyThe external device connections shown may differ slightly from illustrations in this manual.
yyConnect external devices to the TV regardless of the order of the TV port.
yyIf you connect a gaming device to the TV, use the cable supplied with the gaming device.
yyRefer to the external equipments manual for operating instructions.
UHF Antenna
Antenna
ANTENNA/
CABLE IN
Coaxial (75)
(*Not Provided)
Terminal
CAUTION
yyMake sure not to bend the copper wire
of the RF cable.
Copper wire
yyComplete all connections between
devices, and then connect the power
cord to the power outlet to prevent
damage to your TV.
NOTE
yyUse a signal splitter to use 2 TVs or more.
yyDTV Audio Supported Codec: MPEG,
Dolby Digital.
ENGLISH
ENG
VHF Antenna
22
MAKING CONNECTIONS
HDMI Connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown in the following illustration.
NOTE
yyUse the latest High Speed HDMI Cable with CEC (Customer Electronics Control) function.
yyHigh Speed HDMI Cables are tested to carry an HD signal up to 1080p and higher.
yyHDMI Audio Supported Format: PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48 kHz / 88 kHz / 96
kHz / 176 kHz / 192 kHz)
HDMI
IN 2
(*Not Provided)
ENGLISH
ENG
IN 3(MHL)
MAKING CONNECTIONS
23
NOTE
yyWhen using the HDMI/DVI cable, Single link is only supported.
(*Not Provided)
IN 2
IN 3(MHL)
COMPONENT IN
/AV IN
IN 1(ARC)
ENGLISH
ENG
VIDEO/ Y
PB
PR
L/MONO AUDIO R
PC-AUDIO IN
RED
WHITE
DVI OUT
(*Not Provided)
AUDIO OUT
24
MAKING CONNECTIONS
NOTE
IN 3(MHL)
yyConnect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV.
yyThis only works for the MHL-enabled phone.
yyWith some MHL supporting mobile phones, you can use the TV remote to control the phone.
yyAn MHL passive cable is needed to connect the TV and a mobile phone.
yyRemove the MHL cable from the TV when:
- the MHL function is disabled.
- your mobile device is fully charged in standby mode.
MHL Cable
(*Not Provided)
ENGLISH
ENG
Mobile phone
MAKING CONNECTIONS
25
Component Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external
device and the TV with a component cable as shown in the following illustration.
NOTE
PB
VIDEO/ Y
PR
L/MONO AUDIO R
PC-AUDIO IN
RED
WHITE
RED
BLUE
GREEN
(*Not Provided)
(*Not Provided)
VIDEO
RED
WHITE
RED
BLUE
GREEN
AUDIO
ENGLISH
ENG
COMPONENT IN
/AV IN
yyIf cables are installed incorrectly, it could cause the image to display in black and white or with
distorted color.
yyCheck to ensure the cables are matched with the corresponding color connection.
26
MAKING CONNECTIONS
Composite Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external
device and the TV with the composite cable as shown in the following illustration.
NOTE
ENGLISH
ENG
COMPONENT IN
/AV IN
yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of
the TV.
yyCheck to ensure the cables are matched with the corresponding color connection.
PB
/Y
PR
L/MONO AUDIO R
PC-AUDIO IN
RED
WHITE
YELLOW
(*Not Provided)
RED
WHITE
YELLOW
VIDEO
L (MONO) AUDIO R
MAKING CONNECTIONS
27
Connecting to a PC
NOTE
yyUse an HDMI connection for the best image quality.
yyDepending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.
yyIn PCmode, there may be noise associated with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture
is clear.
yyThe synchronization input form for horizontal and vertical frequencies is separate.
yyDepending upon the graphics card, some resolution settings may not allow the image to be
positioned on the screen properly.
yyIf you are using DVI out from a PC, you have to connect analog audio separately. Refer to the
instructions on the next page.
yyWhen using the HDMI/DVI cable, Single link is only supported.
ENGLISH
ENG
IN 3(MHL)
HDMI
IN 2
(*Not Provided)
IN 3(MHL)
IN 1(ARC)
PC
IN 2
MAKING CONNECTIONS
IN 1(ARC)
28
IN 3(MHL)
VIDEO/ Y
PB
PR
L/MONO AUDIO R
IN 1(ARC)
COMPONENT IN
/AV IN
IN 2
(*Not Provided)
PC-AUDIO IN
RED
WHITE
ENGLISH
ENG
(*Not Provided)
AUDIO OUT
DVI OUT
PC
(PC)
(PC)
RGB
RGB
(RGB/HDMI-PC)
(RGB/HDMI-PC)
AUDIO
AUDIO
AUDIO OUT
MAKING CONNECTIONS
29
NOTE
yyDo not look into the optical output port. Looking at the laser beam may damage your vision.
yyAudio with ACP (Audio Copy Protection) function may block digital audio output.
(*Not Provided)
OPTICAL AUDIO IN
ENGLISH
ENG
OPTICAL
DIGITAL
AUDIO OUT
30
MAKING CONNECTIONS
NOTE
yySome USB Hubs may not work. If a USB device connected using a USB Hub is not detected,
connect it to the USB port on the TV directly.
ENGLISH
ENG
USB IN 1
USB IN 2
USB IN 3
(*Not Provided)
USB
USB HUB
31
CAUTION
y Do not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TVs remote
sensor.
Wheel (OK)
Press the center of the Wheel button
to select a menu.
You can change channels and scroll
the menu by using the Wheel
button.
(POWER)
Turns the TV on or off.
(BACK)
Returns to the previous screen.
(EXIT to LIVE)
Switches among broadcast (antenna) and
various inputs.
Color buttons
These access special functions in
some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
/INPUT
CH
VOL
(Smarthome)
Accesses the Smarthome menu.
(Voice recognition)
Network connection is required to use
the voice recognition function.
1. Press the voice recognition button.
2. Speak when the voice display
window appears on the left of the TV
screen.
* Use the Magic Remote no further
than 10 cm (4 inch) from your face.
* The voice recognition may fail when
you speak too fast or too slowly.
* The recognition rate may vary
depending upon the users
characteristics (voice, pronunciation,
intonation, and speed) and the
environment (noise and TV volume).
VOL
(MUTE)
Mutes all sounds.
* By pressing and holding the
button,
VD function will be enabled.
SAP(Secondary Audio Program) Feature can
also be enabled by pressing the
key.
.
CH
ENGLISH
ENG
Navigation buttons
(up/down/left/right)
Press the up, down, left or right button
to scroll the menu.
buttons while
If you press
the pointer is in use, the pointer will
disappear from the screen and Magic
Remote will operate like a general
remote control.
To display the pointer on the screen
again, shake Magic Remote to the left
and right.
32
(Wheel)
(BACK)
(Smart
home)
Press the
(BACK) and
(Smarthome) at the same time, for five
seconds, to unpair the Magic Remote
with your TV.
Pressing and holding the
(EXIT to
LIVE) button will let you cancel and
re-register Magic Remote at once.
33
Press
(Smarthome) button to access the
Smarthome menu.
Wheel
ENGLISH
ENG
34
SPECIFICATIONS
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement
AC 100 - 240 V ~ 50 / 60 Hz
AC 120V ~ 50 / 60 Hz (For 70LB7100)
Television System
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75
Environment
condition
Operating
Temperature
0 - 40 C (32 F ~ 104 F)
Operating
Humidity
Less than 80 %
Storage
Temperature
-20 - 60 C (- 4 F ~ 140 F)
Storage
Humidity
Less than 85 %
MODELS
ENGLISH
ENG
Dimensions
(W x H x D)
Weight
With stand
Without stand
Without stand
1.0 A / 100 W
1.1 A / 110 W
MODELS
Weight
47LB6350
(47LB6350-UQ)
With stand
Dimensions
(W x H x D)
47LB6300
(47LB6300-UQ)
42LB6300
(42LB6300-UQ)
With stand
Without stand
50LB6300
(50LB6300-US)
1,128 x 709 x 222 (mm)
44.4 x 27.9 x 8.7 (inch)
1,128 x 660 x 55.8 (mm)
44.4 x 25.9 x 2.1 (inch)
With stand
Without stand
1.2 A / 120 W
SPECIFICATIONS
MODELS
Dimensions
(W x H x D)
Weight
With stand
Without stand
With stand
Without stand
55LB6300
(55LB6300-UQ)
60LB6300
(60LB6300-US)
55LB6350
(55LB6350-UQ)
1,241 x 769 x 224 (mm)
1.3 A / 130 W
1.3 A / 130 W
65LB6300
(65LB6300-UE)
MODELS
Dimensions
(W x H x D)
Weight
With stand
Without stand
With stand
Without stand
29 kg (63.9 Ibs)
Dimensions
(W x H x D)
Weight
With stand
Without stand
1.0 A / 100 W
1.1 A / 110 W
50LB6500
(50LB6500-UM)
55LB6500
(55LB6500-UM)
With stand
Without stand
With stand
Without stand
1.2 A / 120 W
1.3 A / 130 W
MODELS
Weight
Without stand
Dimensions
(W x H x D)
47LB6500
(47LB6500-UM)
MODELS
Weight
42LB6500
(42LB6500-UM)
With stand
Dimensions
(W x H x D)
1.9 A / 190 W
With stand
Without stand
With stand
Without stand
60LB6500
(60LB6500-UP)
1,351 x 833 x 289 (mm)
53.1 x 32.7 x 11.3 (inch)
1,351 x 785 x 57.5 (mm)
53.1 x 30.9 x 2.2 (inch)
22.5 kg (49.6 Ibs)
21.8 kg (48 Ibs)
1.3 A / 130 W
ENGLISH
ENG
MODELS
35
36
SPECIFICATIONS
MODELS
Dimensions
(W x H x D)
Weight
With stand
Without stand
With stand
Without stand
Dimensions
(W x H x D)
Weight
With stand
Without stand
29 kg (63.9 Ibs)
1.5 A / 150 W
1.9 A / 190 W
70LB7100
(70LB7100-UC)
Without stand
MODELS
ENGLISH
ENG
Weight
65LB7100
(65LB7100-UB)
With stand
Dimensions
(W x H x D)
60LB7100
(60LB7100-UT)
With stand
Without stand
With stand
Without stand
2.6 A / 260 W
55LB7200
(55LB7200-UB)
1,231 x 769 x 247 (mm)
48.4 x 30.2 x 9.7 (inch)
1,231 x 718 x 55.1 (mm)
48.4 x 28.2 x 2.1 (inch)
19 kg (41.8 Ibs)
18.5 kg (40.7 Ibs)
1.3 A / 130 W
37
IEEE 802.11a/b/g/n
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz
802.11a: 11.5 dBm
802.11b: 11 dBm
802.11g: 10.5 dBm
802.11n - 2.4GHz: 11 dBm
802.11n - 5GHz: 12.5 dBm
Bluetooth
Standard
Frequency Range
10 dBm or Lower
yyBecause band channel used by the country could be different, the user can not change or
adjust the operating frequency and this product is set for the regional frequency table.
yyThis device should be installed and operated with minimum distance 20 cm (7.8 inch)
between the device and your body. And this phrase is for the general statement for
consideration of user environment.
yyContains FCC ID: BEJLGSBW41 / Contains IC: 2703H-LGSBW41
ENGLISH
ENG
38
MAINTENANCE / TROUBLESHOOTING
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
CAUTION
yyMake sure to turn the power off and disconnect the power cord and all other cables first.
yyWhen the TV is left unattended or unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
CAUTION
ENGLISH
ENG
yyDo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
yyDo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air
fresheners, or lubricants, as these may damage the screens finish and cause discoloration.
yyDo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
Power Cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
yyCheck the remote control sensor on the product and try again.
yyCheck if there is any obstacle between the product and the remote control.
to ,
to
yyCheck if the batteries are still working and properly installed (
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Sleep Timer/Timer Power off is activated in the TIMERS settings.
yyIf there is no signal while the TV is on, the TV will turn off automatically after 15
minutes of inactivity.
).
TELEVISOR LED*
* Los televisores con LED de LG tienen pantallas LCD
con luces de fondo LED.
42LB6500 60LB7100
47LB6500 65LB7100
50LB6500 70LB7100
55LB6500
60LB6500
55LB7200
www.lg.com
ESPAOL
ENG
ADVERTENCIA
Si ignora el mensaje de advertencia, puede sufrir
lesiones graves, accidentes o la muerte.
PRECAUCIN
Si ignora el mensaje de precaucin, puede sufrir
heridas leves o provocar daos en el producto.
NOTA
La nota le ayuda a comprender y a utilizar el producto
de forma segura. Lea la nota cuidadosamente antes
de utilizar el producto.
Power Supply
Short-circuit
Breaker
Short-circuit
Breaker
Short-circuit
Power Supply
Power Supply
ESPAOL
ENG
Cable de entrada de la
antena
Abrazadera de
puesta a tierra
Equipo de servicio elctrico
Unidad de descarga de la
antena
(NEC, Seccin 810-20)
Conductor de puesta a
tierra
(NEC, Seccin 810-21)
Abrazadera de
puesta a tierra
yyPuesta a tierra
(Excepto dispositivos sin conexin a tierra.)
Power Supply
Asegrese de que el Short-circuit
cable de puesta
a tierra
Breakerdescargas elctricas
est conectado para evitar
(es decir, un televisor con un enchufe de ca de
tres clavijas debe conectarse a un tomacorriente
de ca con puesta a tierra de tres clavijas). Si no
puede colocarse ninguna puesta a tierra, solicite a
un electricista calificado que instale un disyuntor.
No intente improvisar una puesta a tierra con
conexiones a cables de telfono, pararrayos o
caos de gas.
Interruptor
diferencial
Alimentacin
ESPAOL
ENG
Sistema de electrodos
de conexin a tierra del
servicio de energa (NEC,
Artculo 250, Parte H)
yyLimpieza
Al efectuar la limpieza, desenchufe el cable de
alimentacin y limpie suavemente con un pao
suave para no rayar la superficie. No roce con
agua ni otros lquidos directamente sobre el
televisor, dado que podra provocar una descarga
elctrica. No limpie con productos qumicos como
alcohol, diluyentes o bencina.
yyTraslados
Asegrese de que el aparato est apagado,
desenchufado y que no quede ningn cable
conectado. Es posible que se necesiten dos
personas para trasladar los televisores de gran
tamao. No ejerza presin ni empuje el panel
frontal del televisor.
yyVentilacin
Instale el televisor en un lugar bien ventilado. No lo
coloque en un lugar cerrado como, por ejemplo, un
estante para libros. No cubra el producto con telas
ni ningn otro material mientras est enchufado.
No lo instale en lugares con demasiado polvo.
yySi huele humo u otros olores que provienen de
la TV, desconecte el cable de alimentacin y
comunquese con un centro de servicio autorizado.
yyMantenga el aparato alejado de la luz solar directa.
yyNunca toque el aparato o la antena durante una
tormenta elctrica o con truenos.
yyAl montar el televisor en la pared, asegrese de
que los cables de alimentacin y de seal no
queden colgando en la parte posterior.
yyNo permita que se golpee el producto o que algn
objeto se caiga dentro de l, ni que se golpee la
pantalla.
yyCmo desconectar la fuente de alimentacin
principal
El tomacorriente utilizado con este dispositivo
debe ser de fcil acceso.
yyGuarde los accesorios (bateras, etc.) en un lugar
seguro lejos del alcance de los nios.
yyEste aparato usa bateras. Puede ser que en su
comunidad existan normativas que requieren que
deseche estas bateras de forma correcta debido
a las consideraciones ambientales. Pngase
en contacto con la autoridad local para obtener
informacin acerca del desecho o reciclaje.
yyNo deseche las bateras en el fuego.
yyNo provoque cortocircuitos, no desarme ni permita
que las bateras se sobrecalienten.
FCC NOTICE
Este equipo ha sido evaluado y cumple con
los lmites para dispositivos digitales clase B,
conforme el artculo 15 de las reglas de la FCC.
Estos lmites han sido diseados para brindar una
proteccin razonable contra la interferencia daina
en una instalacin residencial. Este equipo genera,
utiliza y puede irradiar energa de radiofrecuencia
y, si no se instala y no se utiliza de acuerdo con las
instrucciones, podra causar interferencia daina
a las comunicaciones radiales. Sin embargo,
no existe garanta de que la interferencia no
se produzca en una instalacin en particular. Si
este equipo ocasiona interferencia daina en la
recepcin de radio o televisin (lo cual puede
determinarse encendiendo y apagando el equipo),
se recomienda al usuario que intente corregir la
interferencia tomando una o ms de las siguientes
medidas:
- Reoriente o reubique la antena receptora.
- Aumente la distancia entre el equipo y el
receptor.
- Conecte el equipo en un tomacorriente de
un circuito diferente de aqul al que est
conectado el receptor.
- Consulte al distribuidor o a un tcnico de
radio/TV experimentado para obtener ayuda.
Este dispositivo cumple con el artculo 15 de las
reglas de la FCC. El funcionamiento est sujeto a
las dos condiciones siguientes: (1) este dispositivo
no puede causar interferencia daina y (2) este
dispositivo debe aceptar cualquier interferencia
que reciba, incluida la interferencia que pueda
causar un funcionamiento no deseado.
Cualquier tipo de modificacin o cambio en la
construccin del dispositivo sin autorizacin
expresa del supervisor responsable podra anular
la autoridad del usuario para utilizar el producto.
ESPAOL
ENG
yyAparicin de puntos
El panel de plasma o LCD es un producto de alta
tecnologa con una resolucin de entre dos o seis
millones de pxeles. En raras ocasiones, es posible
que note la presencia de pequeos puntos en la
pantalla mientras mira televisin. Estos puntos son
pxeles desactivados y no afectan el rendimiento
ni la fiabilidad del televisor.
yyReproduccin de ruidos
Crujidos es posible que se produzcan crujidos
cuando est mirando televisin o al apagar el
televisor; se trata de un ruido generado por
la contraccin trmica del plstico debido a la
temperatura y la humedad. Este ruido es comn
en productos donde se requiere la deformacin
trmica.
Zumbidos en el circuito elctrico o el panel se
trata de un ruido de bajo nivel, generado por un
circuito de conmutacin de alta velocidad, que
suministra una gran cantidad de corriente para que
un producto pueda funcionar. Vara segn cada
producto.
Este ruido no afecta el rendimiento ni la fiabilidad
del producto.
yyTenga cuidado de no tocar las aberturas de
ventilacin. Al mirar televisin durante largos
periodos, las aberturas de ventilacin pueden
calentarse. Esto no afecta el rendimiento ni causa
defectos en el producto.
yySi siente que el televisor est fro al tocarlo,
es posible que ocurra un pequeo parpadeo
cuando lo prenda. Se trata de algo normal y no
significa que el televisor est daado. Tambin
es posible que aparezcan pequeos puntos en la
pantalla, de color rojo, verde o azul. Sin embargo,
no afectan el rendimiento del televisor. No toque
la pantalla LCD ni coloque los dedos sobre ella
durante mucho tiempo. Esto podra producir
algunos efectos de distorsin temporales en la
pantalla.
Ver imgenes en 3D
(en televisores 3D)
ADVERTENCIA
Entorno de visualizacin
yyTiempo de visualizacin
- Cuando vea contenido en 3D, tome un
descanso de 5 a 15 minutos cada hora.
Ver contenido en 3D durante un perodo
prolongado puede causar dolor de cabeza,
mareos, fatiga o fatiga visual.
ESPAOL
ENG
PRECAUCIN
Entorno de visualizacin
yyDistancia de visualizacin
- Mantenga una distancia de al menos dos
veces la longitud diagonal de la pantalla cuando
vea contenido en 3D. Si siente incomodidad al
ver contenido en 3D, aljese del TV.
LICENCIAS
Las licencias admitidas pueden variar segn el modelo.
Para obtener ms informacin sobre las licencias, visite www.lg.com .
ESPAOL
ENG
Para obtener el cdigo fuente de GPL, LGPL, MPL y otras licencias de fuente abierta, que se
incluyen en este producto, visite http://opensource.lge.com.
Adems del cdigo fuente, se pueden descargar todos los trminos de licencia, las exenciones de
garantas y los derechos de autor mencionados.
Adems, LG Electronics le proporcionar el cdigo fuente abierto en CD-ROM por un valor que
cubre el coste de realizar dicha distribucin (como el coste de los medios, el envo y la manipulacin)
previa solicitud va correo electrnico a opensource@lge.com . Esta oferta es vlida por tres (3) aos
a partir de la fecha en que compre el producto.
CONTENIDO
CONTENIDO
ESPAOL
ENG
INSTRUCCIONES DE SEGURIDAD
IMPORTANTES
31
Ver imgenes en 3D
(en televisores 3D)
LICENCIAS
32
32
32
33
CONTENIDO
34
ESPECIFICACIONES
PROCEDIMIENTO DE
INSTALACIN
37
CONFIGURACIN DE CONTROL
DEL DISPOSITIVO EXTERNO
MONTAJE Y PREPARACIN
38
MANTENIMIENTO
9
11
12
13
14
15
15
17
18
19
Desempacar
Complementos opcionales
Componentes y botones
- Uso del botn de control
Levantar y trasladar el televisor
Configurar el televisor
- Colocar la base de la televisin
- Montar sobre una mesa
- Sujetar los cables
- Montar en la pared
38
38
38
38
SOLUCIN DE PROBLEMAS
21
ESTABLECER CONEXIONES
21
22
22
23
24
25
26
27
27
29
29
30
NOTA
yyLa imagen puede ser diferente a la de su
televisor.
yyEl OSD (On Screen Display, Despliegue
En la Pantalla) de su TV puede ser un poco
diferente que este manual.
yyLos mens y las opciones disponibles
pueden variar segn la fuente de entrada
que utilice.
yyEs posible que se agreguen nuevas
funciones a este televisor en el futuro.
PROCEDIMIENTO DE INSTALACIN
1
MONTAJE Y PREPARACIN
Desempacar
Verifique que la caja del producto contenga los siguientes elementos. Si falta algn accesorio,
comunquese con el distribuidor local mediante el cual adquiri el producto. Las ilustraciones de este
manual pueden diferir del producto que usted adquiri.
PRECAUCIN
NOTA
yyLos artculos suministrados con el producto adquirido pueden variar segn el modelo.
yyEs posible que cambien las especificaciones del producto o el contenido del manual sin previo
aviso debido a las actualizaciones de las funciones del producto.
yyPara que la conexin sea ptima, los cables HDMI y los dispositivos USB tienen que tener
biseles que no superen los 10 mm (0,39 pulgada) de espesor y 18 mm (0,7 pulgada) de ancho.
yyUtilice un cable de extensin que sea compatible con USB 2.0 en caso de que el cable USB o
la tarjeta de memoria USB no encajen en el puerto USB del TV.
*A
*B
10 mm (0,39 pulgada)
18 mm (0,7 pulgada)
ESPAOL
ENG
yyNo use ningn producto no autorizado para garantizar la seguridad y la vida til del producto.
yyNingun dao o lesiones por el uso de elementos no autorizados no estn cubiertos por la
garanta.
yyAlgunos modelos parecen tener una pelcula fina sobre la pantalla. Esta forma parte de la
pantalla, as que no la retire.
10
MONTAJE Y PREPARACIN
P P
Cable de alimentacin
(Segn el modelo)
Tag On
Tag On
(Segn el modelo)
Separadores de soporte de
pared
2 PZ
(Consulte p.20)
Tornillos de soporte
4 PZ, M4 x L14
(Consulte p.15, 16)
(Para LB6500, LB7100
series, 55LB7200)
ESPAOL
ENG
Sujetacables
(Segn el modelo)
(Consulte p.18)
(Para 42/47/50/55LB6300,
47/55LB6350,
42/47/50/55LB6500)
Base de Soporte
(Consulte p.16)
Organizador de cables
2 PZ
(Consulte p.18)
(Para 60/65LB6300,
60LB6500,
60/65/70LB7100,
55LB7200)
MONTAJE Y PREPARACIN
11
Complementos opcionales
Los complementos opcionales se pueden cambiar o modificar para mejorar la calidad, sin necesidad
de aviso previo.
Para adquirir estos elementos, comunquese con su distribuidor.
Estos dispositivos solo funcionarn en ciertos modelos.
Es posible que el nombre o el diseo del modelo hayan cambiado, debido a las circunstancias o
polticas del fabricante.
AN-MR500
Remoto Mgico
AG-F***
Anteojos para Cinema 3D
(Segn el modelo)
AN-VC5**
Cmara de videollamada
AG-F***DP
Anteojos Dual Play
(Segn el modelo)
Dispositivo de audio de LG
Tag On
AN-WF500
Dispositivo Wifi / Bluetooth
(Segn el modelo)
ESPAOL
ENG
12
MONTAJE Y PREPARACIN
Componentes y botones
(Para 42/47/50/55LB6300,
47/55LB6350,42/47/50/55LB6500)
Pantalla
Bocinas
Botn de control2
Control remoto y sensores
inteligentes1
Pantalla
Botn de control2
Bocinas
Indicador de encendido
ESPAOL
ENG
NOTA
yyRetirar el plstico protector en la parte inferior de la TV
(Segn el modelo)
El plstico protector se aplica a la parte frontal de la TV para
protegerla de rallones u otros daos durante su traslado.
Cuando el televisor est instalado, retire el plstico protector de
la parte inferior del gabinete.
MONTAJE Y PREPARACIN
13
Funciones Bsicas
Encendido
Apagado
Control de
Volumen
Control de
Canales
NOTA
y Con el dedo sobre el botn de control, muvalo hacia arriba, abajo, izquierda o derecha, tenga
cuidado de no presionar el botn de control. Si pulsa el botn de control primero, no podr
ajustar el nivel de volumen y/o desplazarse por los canales guardados.
ESPAOL
ENG
Ajustar el Men
Cuando la TV est encendida, presione el botn de control una vez. Puede ajustar los elementos del
men ( , ,
) moviendo el botn de control hacia izquierda o derecha.
TV APAGADO
CERRAR
ENTRADA
Apagar alimentacin.
Limpia la visualizacin en pantalla y vuelve al modo de TV.
Accesar a las fuentes de entrada.
14
MONTAJE Y PREPARACIN
Levantar y trasladar el
televisor
Si desea levantar o trasladar el televisor, lea las
instrucciones a continuacin para no rayar o
daar el aparato, y para transportarlo de forma
segura, independientemente del tamao o tipo
de aparato.
PRECAUCIN
yyNo toque la pantalla. De lo contrario,
podra daarla.
yyNo coloque el producto en el piso con
la parte frontal hacia abajo sin una
almohadilla. Al hacerlo puede causar
daos a la pantalla.
yySe recomienda trasladar el televisor en la
caja o el material de embalaje en el que lo
recibi al comprarlo.
yyAntes de mover o levantar el televisor,
desconecte el cable de alimentacin y el
resto de los cables.
yyCuando sostenga el televisor, la pantalla
debe quedar alejada de usted para evitar
algun dao.
ESPAOL
ENG
yySostenga con firmeza la parte superior e
inferior del marco del televisor. Asegrese
de no sostenerlo por la parte transparente,
por la bocina o por el rea de rejillas de las
bocinas.
MONTAJE Y PREPARACIN
15
Configurar el televisor
Puede instalar su TV en la pared o si desea colocar la TV en un centro de entretenimiento u otro
mueble, colquele la base.
PRECAUCIN
yyAl instalar la base del televisor, ponga la pantalla hacia abajo sobre una mesa acolchada o una
superficie plana para evitar rayas.
yyAsegrese de que los tornillos estn completamente ajustados. (Si no estn lo suficientemente
ajustados, el TV puede inclinarse hacia delante despus de instalarse.)
yyNo ajuste los tornillos con demasiada fuerza, de lo contrario, se pueden desgastar y aflojar.
NOTA
yyAntes de montar el televisor en la pared, retire la base, realizando la instalacin de sta en
orden inverso.
Base de Soporte/
Cuerpo de Soporte
Base de soporte A
Base de
soporte B
1
ESPAOL
ENG
4 PZ
M4 x L14
16
MONTAJE Y PREPARACIN
(Para 42/47/50/55LB6300,
47/55LB6350,
42/47/50/55LB6500)
3
4 PZ
M4 x L14
Base de Soporte
Base de soporte A
Base de
soporte B
ESPAOL
ENG
(Segn el modelo)
yyLa imagen puede ser diferente a la de su televisor.
El conector del sistema de seguridad Kensington
se encuentra en la parte posterior del televisor.
Para ms informacin sobre cmo instalarlo y
usarlo, consulte el manual suministrado con el
sistema de seguridad Kensington o visite el sitio
web http://www.kensington.com.
Conecte el cable del sistema de seguridad
Kensington entre el televisor y la mesa.
NOTA
yyEl sistema de seguridad Kensington es
opcional. Puede solicitar otros accesorios a
travs de su distribuidor local.
MONTAJE Y PREPARACIN
17
(Segn el modelo)
10 cm
(4 pulgadas)
10 cm
10 cm
m
10 c
PRECAUCIN
yyNo colocar la television cerca de fuentes
de calor, puede resultar quemada u
ocasionar otro dao.
PRECAUCIN
yyAsegrese de que los nios no se suban
al televisor ni se cuelguen de l.
NOTA
yyUtilice una plataforma o un armario que
sea lo suficientemente fuerte y grande
para sostener el televisor de manera
segura.
yyLos soportes, los tornillos y los cordones
son opcionales. Puede solicitar otros
accesorios a travs de su distribuidor local.
ESPAOL
ENG
18
MONTAJE Y PREPARACIN
de cables.
de cables.
Sujetacables
Organizador
de cables
Organizador
de cables
Sujetacables
PRECAUCIN
(Para 70LB7100)
ESPAOL
ENG
Sujetacables
Organizador
de cables
PRECAUCIN
yyNo mueva el televisor tirando del
sujetacables y el organizador de cables,
debido a que el sujetador del cable se puede
romper, y causar daos en el televisor.
MONTAJE Y PREPARACIN
Montar en la pared
Se puede usar un soporte de pared opcional
con el televisor LG. Consulte al distribuidor local
para adquirir un soporte de pared que cumpla
con el estndar VESA que usa su modelo de TV.
Cuidadosamente coloque el soporte de pared
en la parte posterior del TV. Instale el soporte de
pared en una pared slida, perpendicular al piso.
Si va a instalar el TV sobre otros materiales de
construccin, pngase en contacto con personal
tcnico calificado para instalar el soporte de
pared. El soporte de pared incluir instrucciones
detalladas. Recomendamos que use un soporte
de pared de marca LG. Cuando no utilice el
soporte de montaje de pared LG, por favor,
utilice un soporte de montaje de pared en el
que el dispositivo est debidamente sujeto a la
pared con el espacio suficiente para permitir la
conectividad con dispositivos externos.
10 cm
(4 pulgadas)
10 cm
60/65LB6300
60LB6500
60/65LB7100
55LB7200
VESA (A x B)
400 x 400 mm
A
B
Tornillo estndar
M6
Cantidad de
tornillos
Soporte de pared
(opcional)
LSW440B
Modelo
70LB7100
VESA (A x B)
600 x 400 mm
A
B
Tornillo estndar
M6
Cantidad de
tornillos
Soporte de pared
(opcional)
LSW640B
42/47/50/55LB6300
47/55LB6350
42/47/50/55LB6500
VESA (A x B)
400 x 400 mm
A
B
Tornillo estndar
M6
Cantidad de
tornillos
Soporte de pared
(opcional)
MSW240
LSW440B
LSW440B
LSW640B
MSW240
ESPAOL
ENG
10 cm
Modelo
19
20
MONTAJE Y PREPARACIN
PRECAUCIN
yyAntes de mover o instalar el televisor,
desconecte el cable de alimentacin. De
lo contrario, podra provocar una descarga
elctrica.
yySi instala el televisor en el techo o en una
pared inclinada, podra caerse y provocar
lesiones graves. Utilice un soporte de
pared autorizado por LG y comunquese
con el distribuidor local o con personal
tcnico calificado.
yyNo ajuste excesivamente los tornillos,
dado que podra daar el televisor y anular
la garanta.
yyUtilice tornillos y soportes de pared que
cumplan con la norma VESA. La garanta
no cubre daos o lesiones provocados
por el uso incorrecto del aparato o de
accesorios no autorizados.
NOTA
ESPAOL
ENG
Separadores
internos de
montaje de
pared
ESTABLECER CONEXIONES
21
ESTABLECER CONEXIONES
yyEsta seccin usa ilustraciones de la serie LB7100.
Conecte varios dispositivos externos al televisor y cambie los modos de entrada para seleccionar
un dispositivo externo. Para obtener ms informacin sobre cmo conectar dispositivos externos,
consulte sus respectivos manuales. Entre los dispositivos externos disponibles pueden mencionarse
los siguientes: receptores de HD, reproductores de DVD, VCR, sistemas de audio, dispositivos de
almacenamiento USB, PC, dispositivos de juegos, etc.
NOTA
yySi graba un programa de TV en una grabadora de DVD o VCR, asegrese de conectar el cable
de entrada de seal al televisor a travs de uno de estos dos dispositivos. Para obtener ms
informacin acerca de la grabacin, consulte el manual proporcionado con el dispositivo conectado.
yyLas conexiones de dispositivos externos que se muestran pueden ser levemente diferentes de
las ilustraciones en este manual.
yyConecte los dispositivos externos al televisor independientemente del orden del puerto del aparato.
yySi conecta un dispositivo de juegos al TV, utilice el cable que se proporciona con dicho dispositivo.
yyConsulte el manual del equipo externo para conocer las instrucciones de funcionamiento.
ESPAOL
ENG
Antena
ANTENNA/
CABLE IN
Coaxial (75)
(*No incluido)
Terminal
PRECAUCIN
yyAsegrese de no doblar el alambre de
cobre del cable de RF.
Alambre de cobre
NOTA
yyPrimero conecte todos los dispositivos
entre s y luego conecte el cable de
alimentacin al tomacorriente, para que
el televisor no resulte daado.
22
ESTABLECER CONEXIONES
Conexin HDMI
La conexin HDMI es la mejor manera de conectar un dispositivo.
Transmite las seales de audio y video digitales de un dispositivo externo al televisor. Conecte el
dispositivo externo y el televisor con el cable HDMI tal como se muestra en la siguiente ilustracin.
NOTA
yyUtilice el cable HDMI de alta velocidad ms reciente con la funcin CEC (control electrnico
por parte del cliente).
yyLos cables HDMI de alta velocidad estn probados para soportar seales HD de hasta 1080
progresivo y superiores.
yyFormato de audio HDMI compatible: PCM (hasta 192 kHz, 32 kHz / 44.1 kHz / 48 kHz / 88 kHz
/ 96 kHz / 176 kHz / 192 kHz)
HDMI
IN 2
(*No incluido)
IN 1(ARC)
ESPAOL
ENG
IN 3(MHL)
ESTABLECER CONEXIONES
23
NOTA
yyAl utilizar un cable HDMI/DVI, slo es compatible con un enlace nico de DVI.
IN 3(MHL)
VIDEO/ Y
PB
PR
L/MONO AUDIO R
ESPAOL
ENG
COMPONENT IN
/AV IN
IN 1(ARC)
IN 2
(*No incluido)
PC-AUDIO IN
ROJO
BLANCO
(*No incluido)
DVI OUT
AUDIO OUT
24
ESTABLECER CONEXIONES
NOTA
IN 3(MHL)
yyConecte el telfono mvil al puerto HDMI IN 3 (MHL) para ver la pantalla del telfono en el TV.
yyEsto solo funciona en telfonos habilitados con MHL.
yyCon telfonos mviles compatibles con MHL, puedes usar el control remoto del TV para controlar
el telfono.
yySe necesita el cable MHL pasivo para conectar el TV y un telfono mvil.
yyQuite el cable MHL del TV cuando:
- la funcin MHL no est funcionando.
- su dispositivo mvil est completamente cargado en modo de espera.
CableCable
MHL
MHL
(*NoProvided)
incluido)
(*Not
Telfono
mvil
Mobile phone
ESPAOL
ENG
ESTABLECER CONEXIONES
25
NOTA
COMPONENT IN
/AV IN
yySi la instalacin de los cables no es la adecuada, podra proyectarse una imagen en blanco y
negro o con colores distorsionados.
yyRevise y compruebe que los cables coincidan con las conexiones de color correspondientes.
PB
VIDEO/ Y
PR
L/MONO AUDIO R
PC-AUDIO IN
(*No incluido)
(*No incluido)
ROJO
BLANCO
ROJO
AZUL
VERDE
VIDEO
AUDIO
ESPAOL
ENG
ROJO
BLANCO
ROJO
AZUL
VERDE
26
ESTABLECER CONEXIONES
Conexin compuesta
Transmite las seales de audio y video analgicas de un dispositivo externo al televisor. Conecte
el dispositivo externo y el televisor con el cable compuesto tal como se muestra en la siguiente
ilustracin.
NOTA
COMPONENT IN
/AV IN
yySi posee una VCR monofnica, conecte el cable de audio de la VCR a la toma AUDIO L/MONO
del televisor.
yyRevise y compruebe que los cables coincidan con las conexiones de color correspondientes.
PB
/Y
PR
L/MONO AUDIO R
PC-AUDIO IN
ROJO
BLANCO
AMARILLO
ESPAOL
ENG
(*No incluido)
ROJO
BLANCO
AMARILLO
VIDEO
L (MONO) AUDIO R
ESTABLECER CONEXIONES
27
Conexin a un dispositivo PC
NOTA
yySe recomienda utilizar el televisor con la conexin HDMI para obtener una calidad de imagen
ptima.
yySegn la tarjeta grfica, es posible que no funcione el modo DOS cuando se utiliza un cable
HDMI a DVI.
yyEn el modo PC, es posible que exista ruido asociado con la resolucin, patrones verticales,
contraste o brillo. Si se producen ruidos, cambie la resolucin de la salida de la PC, cambie la
frecuencia de actualizacin o ajuste el brillo y el contraste en el men IMAGEN hasta que la
imagen mejore.
yyLa forma de onda de la entrada de sincronizacin para las frecuencias horizontales y verticales
es diferente.
yySegn la tarjeta grfica, es posible que algunos ajustes de resolucin no permitan que la
imagen se ubique en la pantalla de forma correcta.
yySi esta usando la salida DVI de una PC, tiene que conectar el audio anlogo por separado.
Tome como referencia las instrucciones de la siguiente pgina.
yyAl utilizar un cable HDMI/DVI, slo es compatible con un enlace nico de DVI.
ESPAOL
ENG
IN 3(MHL)
HDMI
IN 2
(*No incluido)
IN 1(ARC)
PC
IN 2
IN 1(ARC)
28
ESTABLECER CONEXIONES
IN 3(MHL)
VIDEO/ Y
PB
PR
L/MONO AUDIO R
IN 1(ARC)
COMPONENT IN
/AV IN
IN 2
(*No incluido)
PC-AUDIO IN
ROJO
BLANCO
(*No incluido)
AUDIO OUT
DVI OUT
ESPAOL
ENG
PC
(PC)
(PC)
RGB
RGB
(RGB/HDMI-PC)
(RGB/HDMI-PC)
AUDIO
AUDIO
AUDIO OUT
ESTABLECER CONEXIONES
29
NOTA
yyNo mire hacia el puerto de salida ptica. Mirando el rayo lser puede daar su visin.
yyAudio de ACP (Proteccin de copiar Audio) puede bloquear la funcin de salida de audio digital.
(*No incluido)
OPTICAL AUDIO IN
ESPAOL
ENG
OPTICAL
DIGITAL
AUDIO OUT
30
ESTABLECER CONEXIONES
NOTA
yyEs posible que algunos concentradores USB no funcionen. Si no se detecta un dispositivo USB
conectado mediante un concentrador USB, conctelo directamente al puerto USB del TV.
USB IN 1
USB IN 2
USB IN 3
(*No incluido)
USB
USB HUB
ESPAOL
ENG
31
PRECAUCIN
y No use bateras nuevas junto con otras usadas, ya que esto puede daar el control remoto.
Este control remoto utiliza luz infrarroja. Al usarlo, es necesario apuntarlo en direccin al sensor
remoto del TV.
Rueda (OK)
Presione el centro del botn Rueda para
seleccionar un men.
Puede cambiar los programas o canales y
desplazarse por el men con el botn Rueda.
(ENCENDIDO)
Enciende o apaga el TV.
(Atrs)
Regresa a la pantalla anterior.
(Salir a TV en vivo)
Cambia a la transmisin de TV en
vivo o la fuente de entrada.
Botones de color
Permiten acceder a funciones especiales en
algunos mens.
: Rojo,
: Verde,
: Amarillo,
:
(
Azul)
VOL
Ajusta el nivel del volumen.
/INPUT
CH
VOL
/INPUT
(Smarthome)
Accede al men Smarthome.
(Reconocimiento de voz)
Se requiere que la conexin de red
utilice la funcin de reconocimiento de
voz.
1. Presione el botn de reconocimiento
de voz.
2. Hable cuando se active la ventana
Reproducir voz en la parte izquierda
de la pantalla de la TV.
* Utilice el Control Remoto Mgico a
no ms de 10 cm (4 pulgadas) de su
rostro.
* El reconocimiento de voz puede fallar
si habla muy rpido o muy lento.
* La velocidad de reconocimiento
puede variar dependiendo de las
caractersticas del usuario (voz,
pronunciacin, entonacin y velocidad)
y del ambiente (ruido y volumen de la
TV).
ESPAOL
ENG
Botones de navegacin
(arriba/abajo/izquierda/derecha)
Presione los botones arriba, abajo,
izquierda o derecha para desplazarse
por el men.
Si presiona los botones
mientras el puntero est en uso, ste
desaparecer de la pantalla y el Control
Remoto Mgico funcionar como un
control remoto comn.
Para ver el puntero en la pantalla
nuevamente, agite el control remoto
Mgico a la izquierda y a la derecha.
32
Registrando el Control
Remoto Mgico
El control remoto Mgico funciona al vincularlo
con el TV.
(Rueda)
(Atrs)
ESPAOL
ENG
(Smart
home)
33
Presione el botn
(Smarthome) para
ingresar al men Smart Home.
ESPAOL
ENG
34
ESPECIFICACIONES
ESPECIFICACIONES
Las especificaciones del producto pueden cambiar sin previo aviso debido a las actualizaciones de
las funciones de los productos.
Potencia requerida
AC 100 - 240 V ~ 50 / 60 Hz
AC 120V ~ 50 / 60 Hz (Para 70LB7100)
Sistema de televisin
Cobertura de programas
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
Condicin de
ambiente
75
Temperatura de funcionamiento
0 a 40C
Humedad de funcionamiento
Menos de 80 %
Temperatura de almacenamiento
-20 a 60C
Humedad de almacenamiento
Menos de 85 %
MODELOS
47LB6350
(47LB6350-UQ)
ESPAOL
ENG
Con base
Sin base
1,0 A / 100 W
1,1 A / 110 W
47LB6300
(47LB6300-UQ)
42LB6300
(42LB6300-UQ)
50LB6300
(50LB6300-US)
1 128 x 709 x 222 (mm)
44,4 x 27,9 x 8,7 (pulgadas)
1 128 x 660 x 55,8 (mm)
44,4 x 25,9 x 2,1 (pulgadas)
Con base
Sin base
1,2 A / 120 W
ESPECIFICACIONES
MODELOS
55LB6300
(55LB6300-UQ)
60LB6300
(60LB6300-US)
55LB6350
(55LB6350-UQ)
1 241 x 769 x 224 (mm)
Con base
Sin base
1,3 A / 130 W
1,3 A / 130 W
65LB6300
(65LB6300-UE)
MODELOS
Dimensiones Con base
(Ancho x altura
x profundidad) Sin base
Peso
35
Con base
Sin base
29 kg (63,9 libras)
42LB6500
(42LB6500-UM)
47LB6500
(47LB6500-UM)
Con base
Sin base
1,0 A / 100 W
1,1 A / 110 W
MODELOS
50LB6500
(50LB6500-UM)
55LB6500
(55LB6500-UM)
Peso
Con base
Sin base
1,2 A / 120 W
1,3 A / 130 W
60LB6500
(60LB6500-UP)
1 351 x 833 x 289 (mm)
53,1 x 32,7 x 11,3 (pulgadas)
1 351 x 785 x 57,5 (mm)
53,1 x 30,9 x 2,2 (pulgadas)
Con base
Sin base
1,3 A / 130 W
ESPAOL
ENG
1,9 A / 190 W
36
ESPECIFICACIONES
MODELOS
Dimensiones Con base
(Ancho x altura
x profundidad) Sin base
Peso
Con base
Sin base
29 kg (63,9 libras)
1,5 A / 150 W
1,9 A / 190 W
MODELOS
Dimensiones Con base
(Ancho x altura
x profundidad) Sin base
70LB7100
(70LB7100-UC)
1 574 x 964 x 344 (mm)
61,9 x 37,9 x 13,5 (pulgadas)
1 574 x 916 x 60,2 (mm)
61,9 x 36 x 2,3 (pulgadas)
Con base
Sin base
ESPAOL
ENG
Peso
65LB7100
(65LB7100-UB)
Peso
60LB7100
(60LB7100-UT)
2,6 A / 260 W
55LB7200
(55LB7200-UB)
1 231 x 769 x 247 (mm)
48,4 x 30,2 x 9,7 (pulgadas)
1 231 x 718 x 55,1 (mm)
48,4 x 28,2 x 2,1 (pulgadas)
Con base
19 kg (41,8 libras)
Sin base
1,3 A / 130 W
37
Rango de
frecuencias
Potencia de salida
(mxima)
IEEE 802.11a/b/g/n
2 400 a 2 483,5 MHz
5 150 a 5 250 MHz
5 725 a 5 850 MHz
802.11a: 11.5 dBm
802.11b: 11 dBm
802.11g: 10.5 dBm
802.11n - 2.4GHz: 11 dBm
802.11n - 5GHz: 12.5 dBm
Bluetooth
Estndar
Rango de
frecuencias
Potencia de salida
(mxima)
10 dBm o menor
yyComo el canal de banda en uso por el pas puede ser diferente, el usuario no puede cambiar
o ajustar la frecuencia de operacin y este producto est configurado para la tabla de
frecuencias regional.
yyEste dispositivo debe ser instalado y utilizado a una distancia mnima de 20 cm(7.8 pulgadas)
entre el dispositivo y su cuerpo. Esta frase es por declaracin general para la consideracin
de entorno del usuario.
yyContiene FCC ID: BEJLGSBW41 / Contiene IC: 2703H-LGSBW41
- Registro: RCPLGLG13-2300
La operacin de este equipo est sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y,
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar
su operacin no deseada.
Para obtener la informacin de el control de dispositivo externo de configuracin, por favor visite
www.lg.com .
ESPAOL
ENG
38
MANTENIMIENTO
Limpieza del televisor
Limpie el televisor con regularidad para preservar el mejor rendimiento y prolongar la vida til del
producto.
PRECAUCIN
yyPrimero asegrese de apagar la energa y de desconectar el cable de alimentacin y todos los
dems cables.
yyCuando no se utilice el televisor durante mucho tiempo, desconecte el cable de alimentacin
de la toma de la pared para evitar posibles daos por descargas o sobrecargas de energa.
PRECAUCIN
ESPAOL
ENG
yyNo ejerza presin, refriegue ni golpee la superficie con las uas o un objeto punzante, dado
que puede rayar la pantalla y producir distorsiones en la imagen.
yyNo utilice sustancias qumicas (como ceras, bencina, alcohol, tner, insecticidas, desodorantes de
ambientes o lubricantes) dado que pueden daar el acabado de la pantalla y causar decoloracin.
yyNo roce lquido sobre la superficie. Si entra agua en el televisor, puede ocasionar incendios,
descargas elctricas o mal funcionamiento.
Cable de alimentacin
Quite con regularidad el polvo o la tierra acumulados en el cable de alimentacin.
SOLUCIN DE PROBLEMAS
Problema
Solucin
No se puede controlar el
televisor con el control
remoto.
No se muestra ninguna
imagen ni se emite
sonido.
El televisor se apaga de
repente.