Beruflich Dokumente
Kultur Dokumente
WCDMA
Contents
3.5.25 Interoperability Between GSM and WCDMA
GSM BSS
GBSS17.1
Issue
03
Date
2015-12-31
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and
recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any
kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation
of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this
document do not constitute a warranty of any kind, express or implied.
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China
Website:
http://www.huawei.com
Email:
support@huawei.com
3.5.25 Contents
2 Overview
2.1 Introduction
2.2 NEs Supporting the Feature
7.2.1 Overview
7.2.2 Procedure
8 Related Features
8.1 GBFD-114301 GSM/WCDMA Interoperability
8.2 GBFD-114323 2G/3G Cell Reselection Based on MS State
8.3 GBFD-511110 BSC supporting Blind Search
8.4 GBFD-114321 GSM/WCDMA Service Based Handover
8.5 GBFD-114322 GSM/WCDMA Load Based Handover
8.6 GBFD-114325 Fast WCDMA Reselection at 2G CS Call Release
9 Network Impact
9.1 GSM/WCDMA Interoperability
9.1.1 System Capacity
9.1.2 Network Performance
9.2 GSM/WCDMA Service Based Handover
9.2.1 System Capacity
9.2.2 Network Performance
9.3 GSM/WCDMA Load Based Handover
9.3.1 System Capacity
9.3.2 Network Performance
9.4 2G/3G Cell Reselection Based on MS State
9.4.1 System Capacity
9.4.2 Network Performance
9.5 BSC supporting Blind Search
9.5.1 System Capacity
9.5.2 Network Performance
9.6 Fast WCDMA Reselection at 2G CS Call Release
9.6.1 System Capacity
9.6.2 Network Performance
10 Engineering Guidelines
10.1 When to Use Interoperability Between GSM and WCDMA
10.1.1 GSM/WCDMA Interoperability
10.1.2 GSM/WCDMA Service Based Handover
10.1.3 GSM/WCDMA Load Based Handover
10.1.4 2G/3G Cell Reselection Based on MS State
10.1.5 BSC supporting Blind Search
10.1.6 Fast WCDMA Reselection at 2G CS Call Release
10.2 Required Information
10.2.1 GSM/WCDMA Interoperability
11 Parameters
12 Counters
13 Glossary
14 Reference Documents
1.1 Scope
This document describes Interoperability Between GSM and WCDMA, including its technical
principles, related features, network impact, and engineering guidelines.
The Interoperability Between GSM and WCDMA feature involves the following features:
GBFD-119502 PS Handover
GBFD-119502 PS Handover
The following features are described in Common Radio Resource Management Feature
Parameter Description:
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
03 (2015-12-31)
Change Description
Parameter Change
Feature change
None
None
Editorial change
None
02 (2015-06-27)
Change Description
Parameter Change
Feature change
None
None
Editorial change
None
01 (2015-04-20)
Change Description
Parameter Change
Feature change
None
None
Editorial change
None
Draft A (2015-01-15)
Change
Type
Feature
change
Change Description
Supported operator-specific
Added the following parameters:
configurations of better 3G cell MOCNInterRatPolicySw(BSC6900,BSC6910)
handover parameters in
OpHOPreTh2G(BSC6900,BSC6910)
MOCN scenarios. Updated the
OpBet3GHOEn(BSC6900,BSC6910)
following sections:
OpHORSCPTh3G(BSC6900,BSC6910)
6.2 CS Handover from
OpHOEcNoTh3G(BSC6900,BSC6910)
GSM to WCDMA
10.5 Deploying
GSM/WCDMA
Interoperability
Optimize the Packet Flow
Context (PFC) procedure.
Updated the section 7.2.1
Overview.
Editorial
change
Parameter Change
Overview
2.1 Introduction
WCDMA and GSM will coexist for a long time. Therefore, Huawei GSM BSS provides
GSM/WCDMA interoperability, which allows inter-RAT handovers and inter-RAT cell
reselections between GSM and WCDMA.
GSM/WCDMA interoperability supports smooth evolution from GSM to WCDMA, which helps
reduce operators' capital expenditure (CAPEX). This feature provides operators with both
WCDMA and GSM networks complete support for a seamless coverage from GSM to WCDMA.
For example, with the cell reselection or handover function, operators can keep providing
services for a dual-mode MS that moves away from the WCDMA coverage, thereby improving
user experience.
In areas covered by both GSM and WCDMA networks, Interoperability between GSM and
WCDMA balances traffic loads between two networks. For example, when the traffic load in a
GSM cell is too high, Interoperability between GSM and WCDMA can hand over some calls in
the GSM cell to a WCDMA cell.
Interoperability between GSM and WCDMA also allows operators to set different service access
policies in areas covered by both GSM and WCDMA networks. For example, GSM is
preferentially selected for handling CS services and WCDMA for PS services.
NOTE:
All MSs mentioned in this document are multi-mode MSs that support both GSM and WCDMA.
BSC6900
BSC6910
GBTS
eGBTS
GSM/WCDMA
Interoperability
2G/3G Cell
Reselection
Based on MS
State
BSC supporting
Blind Search
GSM/WCDMA
Service Based
Handover
GSM/WCDMA
Load Based
Handover
Fast WCDMA
Reselection at 2G
CS Call Release
NOTE:
indicates that the NE supports this feature. indicates that the NE does not support this feature.
Load information exchange is a prerequisite for the Interoperability Between GSM and
WCDMA feature. Load information exchange consists of the following types:
Load information exchange through the core network (CN): Load information, which is
carried in the information elements (IEs) in the signaling for handovers, is exchanged
between the GSM BSC over the A interface and the WCDMA RNC over the Iu interface. In
this situation, load information is exchanged irregularly. Therefore, unnecessary handover
attempts may occur.
Load information exchange through the Iur-g interface: Load information is exchanged
between the GSM BSC and the WCDMA RNC through the Iur-g interface instead of the
CN. Through the Iur-g interface, the GSM BSC and WCDMA RNC can exchange load
information with each other by performing information exchange and common
measurement. This simplifies the GSM/WCDMA interoperability procedure, shortens the
handover delay, and increases the handover success rate. For details about common
measurement and information exchange based on the Iur-g interface between the GSM and
WCDMA networks, see Common Measurement Based on the Iur-g Interface and
Information Exchange Based on the Iur-g Interface.
To support cell reselection and handover from GSM to WCDMA, the BSS sends the neighboring
WCDMA cell list and parameters for cell reselection and handover through system information
(SI) to MSs. MSs then measure neighboring WCDMA cells based on the received information.
SI consists of SI2quater and Measurement Information. SI2quater is sent on the BCCH, and
Measurement Information is sent on the SACCH. The
Send2QuterFlag(BSC6900,BSC6910) parameter specifies whether to send SI2quater.
The BSC shortens the length of the first SI2Quater and sends MSs the neighboring WCDMA cell
list in SI2Quater and Measurement Information using a dense coding scheme. This decreases the
number of SI that the BSC sends to MSs and reduces the interruption duration of PS services
during cell reselections. FirstSI2QuaterMsgOptSw(BSC6900,BSC6910) specifies whether
the BSC shortens the length of the first SI2Quater it sends to an MS.
SI2QUATEROPTIMIZEDALLOWED(BSC6900,BSC6910) specifies whether the BSC
sends MSs the neighboring WCDMA cell list in SI2Quater and Measurement Information using
a dense coding scheme.
NOTE:
As specified in 3GPP protocols, the BSC can send external neighboring cell information to MSs by using a
maximum of 16 System Information 2Quater messages. If the number of neighboring UMTS and LTE cells
configured for a cell exceeds the maximum number of neighboring cells that can be contained in System
Information 2Quater, the BSC will not send System Information 2Quater to MSs. Therefore, it is recommended that
FirstSI2QuaterMsgOptSw(BSC6900,BSC6910) be set to ON(On) and
SI2QUATEROPTIMIZEDALLOWED(BSC6900,BSC6910) be set to YES(YES) to allow System Information
2Quater to contain information about more neighboring cells.
If "MBR" is indicated in a system message, the MS reports the number of neighboring cells at
each frequency band. If the MS reports the number of neighboring cells at the same frequency
band of the serving cell, it can report a maximum of the value of
GSMFREQCNUM(BSC6900,BSC6910).
Neighboring cells can be delivered automatically or manually, which is controlled by
FDDBA1TAG(BSC6900,BSC6910) in idle mode and by
FDDBA2TAG(BSC6900,BSC6910) in dedicated mode.
If neighboring cells are automatically delivered in idle or dedicated mode, neighboring cells
configured in the ADD GEXT3GCELL command are used and the neighboring cell
information includes the values of DF(BSC6900,BSC6910),
SCRAMBLE(BSC6900,BSC6910), DIVERSITY(BSC6910,BSC6900),
UTRANCELLTYPE(BSC6900,BSC6910), and SYNCCASE(BSC6900,BSC6910).
If neighboring cells are manually delivered in idle mode, the neighboring cell information
depends on the values of ITEM(BSC6900,BSC6910),
ITEMVALID(BSC6900,BSC6910), FDDDLUARFAN(BSC6900,BSC6910),
FDDSCRAMBLE(BSC6900,BSC6910), and FDDDIVERSITY(BSC6900,BSC6910)
in the SET GCELLIDLEFDDBA1 command. The neighboring cell information must be
configured according to the network plan.
If neighboring cells are manually delivered in dedicated mode, the neighboring cell
information depends on the values of ITEM(BSC6900,BSC6910),
ITEMVALID(BSC6900,BSC6910), DF(BSC6900,BSC6910),
SCRAMBLE(BSC6900,BSC6910), and DIVERSITY(BSC6900,BSC6910) in the
SET GCELLHOFDDBA2 command. The neighboring cell information must be
configured according to the network plan.
MSs in GSM cells measure both the signal level of neighboring GSM cells and the signal quality
of neighboring WCDMA cells. The BSS controls the neighboring cell measurement to avoid
unnecessary measurements and reduce the power consumption of MSs. MSs in idle mode or
packet transfer mode can perform inter-RAT cell reselection. MSs in dedicated mode can
perform inter-RAT handover. Operators can set different measurement parameters for MSs
operating in different modes.
Normally, MSs in packet transfer mode determine whether to measure the information about
neighboring WCDMA cells according to the value of QI(BSC6900,BSC6910) and the receive
level of the serving cell. If any of the following conditions are met, MSs in packet transfer mode
determine whether to measure the neighboring WCDMA cell information based on the value of
QP(BSC6900,BSC6910) and the receive level of the serving cell.
The GSM cell has a PBCCH, and QP(BSC6900,BSC6910) is broadcast on the PBCCH.
The serving GSM cell does not have a PBCCH but QP(BSC6900,BSC6910) is broadcast
on the BCCH. In addition, MSs have received the Packet Cell Change Order message or the
Packet Measurement Order message that carries the GPRS cell reselection parameters of
one or more WCDMA cells.
Cell reselection from WCDMA to GSM involves the cell reselection for MSs in idle and packet
transfer modes. In addition, cell reselection for MSs in packet transfer mode is WCDMA-toGSM NACC or enhanced WCDMA-to-GSM NACC.
5.1.1 Cell Reselection from WCDMA to GSM for MSs in Idle Mode
When an MS moves to the GSM coverage area and reselects a GSM cell, the MS initiates a
location update to the GSM network if the location area is changed. The GSM network handles
the location update regardless of whether the MS is from a WCDMA cell.
In the BSS, the cell reselection procedure from WCDMA to GSM is the same as that between
GSM cells. Therefore, this procedure is not described in this document.
After the RNC determines that an MS should reselect a GSM cell, it sends a Cell Change Order
From UTRAN message to the MS. If the WCDMA-to-GSM NACC procedure is applied, the
Cell Change Order From UTRAN message carries the IE "Geran System Information" that
contains the SI1, SI3, and SI13 of the target GSM cell.
Before performing WCDMA-to-GSM NACC, the RNC obtains the SI of the target GSM cell
through the RAN Information Management (RIM) procedure. The RIM procedure consists of SI
request and SI update procedures.
SI request procedure: This procedure is initiated by the source RNC, requesting the SI about
the target GSM cell.
SI update procedure: This procedure is initiated by the target BSC, instructing the source
RNC to update the SI about the target GSM cell.
After receiving the Cell Change Order From UTRAN message, the MS leaves the WCDMA cell
and reselects the GSM cell. After the cell reselection is complete, the MS uses the SI about the
target GSM cell in the initial packet access procedure. In this manner, the period of PS service
interruption is shortened.
During the WCDMA-to-GSM NACC procedure, the RIM procedure must be supported on the
Gb interface. To support the RIM procedure, the BSC must be configured with the
RIMSUP(BSC6900,BSC6910) parameter for the NSE to indicate whether the RIM procedure
is supported.
In WCDMA, Ec/No is the ratio of energy per modulating bit to the noise spectral density. It is equivalent to C/I in
GSM.
Where,
RLA_C is the average receive level. In a GSM-to-WCDMA cell reselection, the RSCP of
the neighboring WCDMA cell must meet the following requirements:
If multiple WCDMA cells meet the cell reselection conditions, the MS selects the cell with the
highest RSCP as the target cell.
The GSM-to-WCDMA cell reselection cannot be triggered within five seconds after the
WCDMA-to-GSM cell reselection. In case of a cell reselection occurring within the previous 15
seconds, FDDQOFF(BSC6900,BSC6910) is increased by 5 dB.
If both the conditions for the GSM-to-WCDMA cell reselection and those for the GSM-to-GSM
cell reselection are met, the MS selects a WCDMA cell as the target cell.
When an MS terminates a call in the GSM network, it camps on the cell in which the call is
released and then starts neighboring cell measurement. When a neighboring WCDMA cell meets
the requirements for cell reselection, the MS reselects the WCDMA cell. The WCDMA cell
reselection is initiated after the MS receives the SI and performs the related calculation.
When the feature Fast WCDMA Reselection at 2G CS Call Release is activated, the BSS selects
the best neighboring WCDMA cell based on the measurement information after the MS in a
GSM cell terminates a CS call. Then, the BSS sends the MS the cell information through the
Channel Release message, instructing the MS to camp on that WCDMA cell. With this feature,
an MS can camp on a WCDMA cell without performing cell reselection decisions, thereby
decreasing the GSM-to-WCDMA cell reselection duration to 1-2s. This feature allows the MS to
camp on the WCDMA cell for a longer period. In addition, the number of location area updates
is reduced, and the paging success rate is increased, increasing the revenue of operators in the
WCDMA network.
NOTE:
The WCDMA network in this document refers to the UTRAN FDD. FDD stands for frequency division duplex.
Procedure
After an MS in a GSM cell releases a CS call, the BSC sends the MS a Channel Release message
that carries the IE "Cell selection indicator after release of all TCH and SDCCH". This IE carries
the neighboring WCDMA cell information, facilitating the MS to reselect a WCDMA cell. This
feature needs the support of both the network and the MS.
Figure 5-2 shows the cell reselection procedure for an MS-terminated call.
Figure 5-2 Procedure for fast WCDMA reselection at 2G CS call release
1. After receiving a Release Complete message from the MS, the MSC sends a Clear
Command message to the BSC, instructing the BSC to release the occupied resources on
the A and Um interfaces.
2. The BSC sends a Channel Release message to the MS, instructing the MS to release the
TCH or SDCCH on the Um interface. The Channel Release message may carry the IE
"Cell selection indicator after release of all TCH and SDCCH", which contains the
information about the target neighboring WCDMA cell.
The MS in the serving GSM cell measures neighboring cells.
If...
Then...
If...
Then...
3. After receiving the Channel Release message, the MS releases the main signaling link.
Then, the MS sends a DISC frame to the BTS, instructing the BTS to release the TCH or
SDCCH.
4. After receiving an Unnumbered Acknowledgement(UA) message, the MS switches to idle
mode and initiates cell reselection based on the IE "Cell selection indicator after release of
all TCH and SDCCH".
If...
Then...
The Channel Release message contains the IE The MS attempts to camp on the cell indicated
"Cell selection indicator after release of all TCH in the Channel Release message.
and SDCCH"
The Channel Release message does not
contain the IE "Cell selection indicator after
release of all TCH and SDCCH"
5. If 4 fails, the MS performs a normal cell reselection procedure to camp on any appropriate
cells.
FASTRESELECTSW(BSC6900,BSC6910) controls whether to allow an MS to fast return to
a WCDMA cell during a location update.
The serving GSM cell has a PBCCH, and QP(BSC6900,BSC6910) is broadcast on the
PBCCH.
The serving GSM cell does not have a PBCCH but QP(BSC6900,BSC6910) is broadcast
on the BCCH. In addition, MSs have received the Packet Cell Change Order message or the
Packet Measurement Order message that carries the GPRS cell reselection parameters of
one or more WCDMA cells.
Figure 5-3 shows the procedure for NC2 cell reselection between GSM and WCDMA.
Figure 5-3 Procedure for NC2 cell reselection between GSM and WCDMA
1. An MS in the GPRS Mobility Management (GMM) Ready state periodically sends Packet
Measurement Report messages or Packet Enhanced Measurement Report messages to the
BSC. These MRs contain the RSCP of neighboring WCDMA cells.
2. After receiving a packet MR, the BSC processes the measurement results. Then, the BSC
determines whether to perform a cell reselection.
3. If the BSC determines to initiate a cell reselection, it sends the Packet Cell Change Order
message to the MS to instruct the MS to reselect the specified target WCDMA cell. Target
cell reselection is based on the NC2 cell reselection algorithm.
4. If a cell reselection fails, the MS sends the Packet Cell Change Failure message to the
BSC. After receiving this message, the BSC subtracts
PENALTYRXLEV(BSC6900,BSC6910) from the receive level of the target cell. If the
receive level of the target cell is less than PENALTYRXLEV(BSC6900,BSC6910), the
BSC sets the receive level of the target cell to 0.
The NC2 cell reselection algorithms include the service-based NC2 cell reselection
algorithm, quality-based NC2 cell reselection algorithm, and load-based NC2 cell
reselection algorithm.
Service-Based NC2 Cell Reselection Algorithm
Table 5-1 lists the values of Service UTRAN CCO Value part and their meanings.
Table 5-1 Values of Service UTRAN CCO Value part and their meanings
Coding Bits
Meaning
000
001
010
111
Other values
If the value of Service UTRAN CCO Value part is 000, the MS triggers a service-based cell
reselection and selects the neighboring WCDMA cell with the highest receive level.
If no neighboring WCDMA cells are available, the MS proceeds to perform a quality-based,
load-based, or coverage-based NC2 cell reselection.
Quality-Based NC2 Cell Reselection Algorithm
MS receive quality deterioration ratio = Times of bad radio link quality/Number of radio
link quality MRs
In quality-based NC2 cell reselection, the cell with the highest priority is selected as the target
cell from the candidate GSM cells. The priority of a cell is determined by its receive level and
characteristics information such as cell type, and support for EDGE. In quality-based NC2 cell
reselection, the candidate WCDMA cell with the highest receive level is selected as the target
cell. If NC2LoadResel(BSC6900,BSC6910) is set to Support(Support), the cell
characteristics information also includes the load of the candidate GSM cells under the same
BSC.
In quality-based NC2 cell reselection, a candidate cell must meet the following conditions:
Receive level of the neighboring GSM candidate cell > Max(Receive level of the serving
cell, MINACCRXLEV(BSC6900,BSC6910) ) + RESELHYST(BSC6900,BSC6910).
When Service UTRAN CCO Value part is set to 010 or 001, none of the neighboring
WCDMA cells can be selected as the candidate target cell.
Then, the highest level candidate cell within the highest priority cells is selected as the target
cell. If a neighboring WCDMA cell is selected, an NC2 cell reselection from GSM to WCDMA
is triggered.
Load-Based NC2 Cell Reselection Algorithm
When the serving cell is overloaded and the receive level in this cell is lower than
LOADRESELMAXRXLEV(BSC6900,BSC6910), load-based NC2 cell reselection is
triggered.
In a load-based NC2 cell reselection, only the MS whose signal level is lower than
LOADRESELMAXRXLEV(BSC6900,BSC6910) can be reselected to a neighboring
cell.
In load-based NC2 cell reselection, the cell with the highest priority is selected as the target cell
from the candidate GSM cells. The priority of a cell is determined by its receive level and
characteristics information such as cell type, and support for EDGE. Alternatively, the candidate
WCDMA cell with the highest receive level is selected as the target cell. If
NC2LoadResel(BSC6900,BSC6910) is set to Support(Support), the characteristics
information about a cell also includes the load of GSM candidate cells under the same BSC.
In load-based NC2 cell reselection, a candidate cell must meet the following conditions:
Receive level of the neighboring GSM cell > Max(Receive level of the serving cell,
MINACCRXLEV(BSC6900,BSC6910) ) + RESELHYST(BSC6900,BSC6910).
When Service UTRAN CCO Value part is set to 010 or 001, none of the neighboring
WCDMA cells can be selected as the candidate cell.
Then, the highest level candidate cell within the highest priority cells is selected as the target
cell. If a neighboring WCDMA cell is selected, an NC2 cell reselection from GSM to WCDMA
is triggered.
Coverage-Based NC2 Cell Reselection Algorithm
Receive level of the neighboring GSM candidate cell > Max(Receive level of the serving
cell, MINACCRXLEV(BSC6900,BSC6910) ) + RESELHYST(BSC6900,BSC6910).
When Service UTRAN CCO Value part is set to 010 or 001, none of the neighboring
WCDMA cells can be selected as the candidate cell.
Then, the highest level candidate cell within the highest priority cells is selected as the target
cell. If a neighboring WCDMA cell is selected, an NC2 cell reselection from GSM to WCDMA
is triggered.
Figure 5-5 shows the procedure for forced network-controlled GSM/WCDMA cell reselection.
The BSC checks the PS service duration for the MS. If the service duration is greater than the
value of FddReselTimeThd and the MS is still in packet transfer mode, the BSC instructs the
MS to reselect to a WCDMA cell.
This section describes the GBFD-511110 BSC supporting Blind Search feature.
Generally, WCDMA/TD-SCDMA frequencies and scrambling codes need to be configured for
GSM-to- WCDMA/TD-SCDMA cell reselection. Based on the configured information, MSs
search for appropriate neighboring WCDMA/TD-SCDMA cells to camp on.
This feature allows the BSC to configure only WCDMA/TD-SCDMA frequencies for GSM-to
WCDMA/TD-SCDMA cell reselection. Based on configured WCDMA/TD-SCDMA
frequencies, MSs can automatically search for appropriate neighboring WCDMA/TD-SCDMA
cells to camp on. Currently, few frequencies are used by a WCDMA/TD-SCDMA network.
Therefore, using this feature can greatly simplify configurations for GSM-to- WCDMA/TDSCDMA cell reselection.
The procedure for implementing this feature is as follows:
1. The BSC selects 3G frequencies.
If both cell-level and BSC-level 3G frequencies are configured, use the cell-level 3G
frequencies.
If neither cell-level nor BSC-level 3G frequencies are configured, this feature does
not take effect.
2. The BSC checks the value of the N3GARFCNSENDTYPE parameter and performs the
related operations.
If no neighboring WCDMA/TD-SCDMA cells are configured but WCDMA/TDSCDMA frequencies are configured using the SET GCELL3GARFCN or SET
G3GARFCN command, the BSC sends the 2Quater SI that contains only the
configured frequencies.
The neighboring GSM cell is an MOCNThe neighboring GSM cell is an MOCNdisabled cell. Alternatively, the neighboring
enabled cell for which
MOCNInterRatPolicySw(BSC6900,BSC6910)
GSM cell is an MOCN-enabled cell for
is set to ON(On).
which
MOCNInterRatPolicySw(BSC6900,BSC6910)
is set to OFF(Off).
OpHOPreTh2G(BSC6900,BSC6910)
Table 6-2 lists the better 3G cell handover parameters used for MOCN-enabled or MOCNdisabled cells in different scenarios.
Table 6-2 Better 3G cell handover parameters used for MOCN-enabled or MOCN-disabled cells in
different scenarios
Parameter
Category
OpBet3GHOEn(BSC6900,BSC6910)
RSCP
HORSCPTH3G(BSC6900,BSC6910)
threshold
for better
3G cell
handovers
OpHORSCPTh3G(BSC6900,BSC6910)
Ec/No
threshold
for better
OpHOEcNoTh3G(BSC6900,BSC6910)
HOECNOTH3G(BSC6900,BSC6910)
Parameter
Category
3G cell
handovers
If some MSs that comply with 3GPP specifications Release 7 or later have not been encrypted in
a WCDMA cell before a WCDMA-to-GSM handover, they cannot be encrypted in the target
GSM cell. This results in call drops due to handover failure. You can configure the following
parameters so that the BSC can select an appropriate encryption algorithm:
6.3.1 Overview
Operators can provide more diversified services when GSM and WCDMA coexist in a mixed
network. Services of different types can be carried on different networks to optimize the
utilization of resources. For example, voice services and low-rate data services are carried on the
GSM network, and high-rate data services are carried on the WCDMA network to allow high
peak throughput.
6.3.2 Procedure
If INTERRATOUTBSCHOEN(BSC6900,BSC6910) is set to YES(Yes), the BSC applies
different handover algorithms for MSs to be handed over from a GSM cell to a WCDMA cell
according to the setting of InterRatServiceLoadHoSwitch(BSC6900,BSC6910).
If InterRatServiceLoadHoSwitch(BSC6900,BSC6910) is set to CnServicebased(CN Service-based), the BSC processes handovers according to the service handover
attributes of the core network (CN) as follows:
the BSC selects a WCDMA cell from the neighboring cell list as the target cell and
starts the handover from GSM to WCDMA.
If InterRatServiceLoadHoSwitch(BSC6900,BSC6910) is set to Servicebased(Service-based), the BSC removes the WCDMA candidate cell whose
uplink/downlink traffic is in the minor congestion level. If the MS is performing a CS
service, the MS accesses the current GSM cell.
If InterRatServiceLoadHoSwitch(BSC6900,BSC6910) is set to Load-based(Loadbased) and the value of the IE "Service Handover" in the ASSIGNMENT REQUEST
message sent from the CN is handover to UTRAN or cdma2000 should be performed,
the BSC selects a neighboring WCDMA cell whose uplink and downlink loads meet the
following condition from WCDMA candidate cells:
6.4.1 Overview
In a mixed network where GSM and WCDMA coexist, MSs in connected mode can be handed
over between GSM and WCDMA to balance the overall network load and enlarge system
capacity.
If the GSM cell that the MS camps on is congested, the BSC redirects the MS to the WCDMA
network according to the load of the WCDMA network.
Load-based handovers between GSM and WCDMA networks require the exchange of load
information between GSM and WCDMA networks.
This document describes only GSM-to-WCDMA load-based handovers. For details about
WCDMA-to-GSM load-based handovers, see the RAN feature parameter description related to
WRFD-020310 3G/2G Common Load Management.
6.4.2 Procedure
If both INTERRATOUTBSCHOEN(BSC6900,BSC6910) and
OutSysLoadHoEn(BSC6900,BSC6910) are set to YES(Yes), the following conditions must
be met to trigger the handover between GSM and WCDMA for MSs in connected mode:
The flow control level of the current system is smaller than or equal to
SYSFLOWLEV(BSC6900,BSC6910).
The Service Handover attribute of the service is not handover to UTRAN or cdma2000 shall
not be performed.
NOTE:
where
A is the handover bandwidth and is calculated using the following formula:
A = (1 + T/IntRATLoadHoPeriod(BSC6910,BSC6900))
InterRATLoadHoRSCPStep(BSC6910,BSC6900)
T is the timer for load-based handovers. This timer is started when the load of the serving cell is greater than the
value of TRIGTHRES(BSC6910,BSC6900).
When FDDREP(BSC6910,BSC6900) is set to RSCP(RSCP), A must be less than or equal to the value of
InterRATLoadHoRSCPBandWidth(BSC6910,BSC6900).
When FDDREP(BSC6900,BSC6910) is set to EcN0(Ec/N0), A must be less than or equal to the value of
InterRATLoadHoEcNoBandWidth(BSC6910,BSC6900).
Cells that do not meet the preceding conditions are removed from the candidate WCDMA cell
list. If there are multiple cells in the candidate cell list, the BSC selects the cell with the highest
receive level.
This section describes the feature GBFD-119502 PS Handover Between GSM and WCDMA.
PS handover is introduced in 3GPP Release 6.
This feature involves WCDMA-to-GSM and GSM-to-WCDMA PS handovers.
WCDMA-to-GSM PS handovers are initiated by the RNC. PS handovers have two phases:
handover preparation and handover execution. On the BSS side, the preparation and execution
procedures for WCDMA-to-GSM PS handovers are the same as those for inter-BSC handovers
in the GSM system.
WCDMA-to-GSM PS handovers are supported when
SPTINTERRATINBSCPSHO(BSC6900,BSC6910) is set to SUPPORT(Support).
7.1.2 Procedure
This section uses an inter-SGSN WCDMA-to-GSM PS handover as an example. The procedures
for the intra-SGSN and inter-SGSN WCDMA-to-GSM PS handovers are similar. The only
difference is that during intra-SGSN WCDMA-to-GSM PS handover, there is no inter-SGSN
signaling interaction because the GSM cell and the WCDMA cell use the same SGSN.
Figure 7-1 shows the signaling procedure during handover preparation.
Figure 7-1 WCDMA-to-GSM PS handover preparation
3. The 3G SGSN checks the IE "Target Cell Identifier" and determines that the handover is an
inter-RAT handover. Then, the 3G SGSN sends a Forward Relocation Request message to the
2G SGSN of the target cell.
4. The 2G SGSN sends a PS Handover Request message to the BSS, requesting the BSS to
reserve resources for the handover. The 2G SGSN then activates the PFC for the handover.
5. The BSS reserves resources and allocates a TBF for the handover based on the PFC.
6. The BSS creates the Target BSS to Source BSS Transparent Container, which contains the PS
handover command.
7. The BSS responds to the 2G SGSN with a PS Handover Request Acknowledge message and is
then ready to receive downlink data.
8. The 2G SGSN responds with a Forward Relocation Response message. The handover
preparation is complete.
Figure 7-2 shows the signaling procedure during handover execution.
1. The 3G SGSN receives downlink data from the GGSN and sends the data to the MS through
the RNC.
2. The 3G SGSN sends a Relocation Command message to the source RNC.
3. The RNC forwards packet data to the 2G SGSN through the 3G SGSN.
4. The RNC suspends uplink and downlink data transfer, and sends a Handover From UTRAN
Command message to the MS. After receiving this message, the MS suspends the uplink data
transmission.
5. The RNC sends a Forward SRNS Context (RAB contexts) message to the 2G SGSN through
the 3G SGSN. Then, the 2G SGSN responds with a Forward SRNS Context Acknowledge
message.
6. The MS executes the handover. In this step, the MS sends access bursts (ABs) to the target
BSS and accesses the target GSM cell. Then, the MS receives the timing advance (TA) from the
BSS.
7./7a. After accessing the cell, the MS processes the Non-Access Stratum (NAS) container and
then sends an exchange identifier (XID) Response message to the 2G SGSN to resume the uplink
data transfer.
8. After receiving the first correct RLC/MAC block, the BSS sends a PS Handover Complete
message to inform the 2G SGSN that the handover is successful. The 2G SGSN then forwards
uplink data to the GGSN.
9. After receiving the PS Handover Complete message, the 2G SGSN sends a Forward
Relocation Complete message to inform the 3G SGSN that the handover is complete. The 3G
SGSN then responds with a Forward Relocation Complete Acknowledge message.
10. The 2G SGSN sends an Update PDP Context Request message to the GGSN. The GGSN
then updates the PDP context fields and returns an Update PDP Context Response message.
From now on the GGSN sends new incoming downlink IP packets to the 2G SGSN instead of to
the 3G SGSN.
11. The 3G SGSN sends an Iu Release Command message to the RNC to release related
resources. After sending all necessary data to the MS, the RNC returns an Iu Release Complete
message to the 3G SGSN.
12./12a. The 2G SGSN may initiate LLC/SNDCP XID negotiation.
13. The MS starts the routing area update. The handover is complete.
The radio access capability reported by the MS contains the PS handover field, which indicates
that the MS supports PS handover.
The BVC RESET and BVC RESET ACK messages sent over the Gb interface contain the
Extended Feature Bitmap field, which specifies whether the Network Service Entity (NSE)
supports PS handover:
If the BVC RESET or BVC RESET ACK message sent by the SGSN does not contain the
Extended Feature Bitmap field, or if the Extended Feature Bitmap field specifies that PS
handover is not supported, none of the cells under the NSE of the SGSN supports PS
handover. That is, the source cell does not support PS handover.
If the Extended Feature Bitmap field specifies that PS handover is supported, all cells under
the NSE of the SGSN support PS handover. That is, the source cell supports PS handover.
The triggering conditions for a GSM-to-WCDMA PS handover vary according to the setting of
NCO(BSC6900,BSC6910):
Handover Algorithms
7.2.2 Procedure
On the BSS side, the GSM-to-WCDMA PS handover procedure is similar to the inter-BSC PS
handover procedure. The differences are as follows:
The PS Handover Required message carries the Source BSC to Target RNC Transparent
Container, which contains IEs such as the MS radio access capability, paging mode, Global
TFI, and target cell SI request.
The PS Handover Required Acknowledge message carries the Source RNC to Target BSC
Transparent Container, which contains IEs such as the handover command and target cell SI
request.
1. The source BSS decides to initiate a PS handover to a WCDMA cell. At this point, both uplink
and downlink user data is transmitted over the following: TBFs between the MS and the source
BSS, BSSGP PFC tunnels between the source BSS and the 2G SGSN, GTP tunnels between the
2G SGSN and the GGSN.
2. The source BSS sends a PS Handover Required message, which carries the Target RNC
Identifier information, to the 2G SGSN.
3. After detecting that the handover is an inter-RAT handover to WCDMA based on the Target
RNC Identifier, the 2G SGSN sends a Forward Relocation Request message to the 3G SGSN.
4. The 3G SGSN sends a Relocation Request message to request the target RNC to reserve
resources in the target WCDMA cell.
The target RNC responds with a Relocation Request Acknowledge message after resources are
reserved in the target RNC.
6. The 3G SGSN sends a Forward Relocation Response message to the 2G SGSN. The handover
preparation is complete.
Figure 7-4 shows the signaling procedure during handover execution.
Figure 7-4 GSM-to-WCDMA PS handover execution
The 2G SGSN continues to receive downlink and uplink user plane data.
1. After receiving a Forward Relocation Response message from the 3G SGSN, the 2G
SGSN may forward downlink data to the target RNC through the 3G SGSN. The target
RNC then sends the data to the MS over the air interface.
Related Features
None.
Mutually Exclusive Features
None.
Impacted Features
Feature ID
Feature Name
Description
Feature ID
Feature Name
Description
GBFD-511403
Extended BCCH
GBFD-114325
Feature ID
Feature Name
GBFD-114301
GSM/WCDMA
Interoperability
GBFD-114302
GSM/TD-SCDMA
Interoperability
Description
Feature ID
Feature Name
Description
GBFD-116201
Network-Controlled Cell
Reselection (NC2)
GBFD-511405
Impacted Features
None.
Feature ID
Feature Name
GBFD-114301
GSM/WCDMA
Interoperability
GBFD-114302
GSM/TD-SCDMA
Interoperability
Description
Feature ID
GBFD-511405
N/A
N/A
Feature/Function Name
Description
Impacted Features
Feature ID
GBFD-114325
Feature Name
Description
Feature ID
Feature Name
Description
Feature ID
GBFD-114301
Feature Name
Feature/Function Name
GSM/WCDMA
Interoperability
Description
None.
Impacted Features
None.
Feature ID
GBFD-114301
Feature Name
Feature/Function Name
GSM/WCDMA
Interoperability
Description
None.
Impacted Features
None.
Feature ID
GBFD-114301
Feature Name
GSM/WCDMA
Interoperability
Description
None.
Impacted Features
Feature ID
GBFD-511312
Feature Name
Description
Feature ID
Feature Name
Description
Feature ID
Feature Name
Description
Network Impact
WCDMA networks, improves the overall capacities of the GSM and WCDMA networks, and
prevents the system from being overloaded.
Stay on the GSM network, thereby preventing these MSs from automatically reselecting to
neighboring WCDMA cells and reducing KPI deterioration.
10
Engineering Guidelines
It is recommended that the GSM/WCDMA Interoperability feature be used with the following
function:
Early classmark sending function: Set ECSC(BSC6900,BSC6910) to YES(Yes) to enable this
function. With this function, the BSC quickly determines whether MSs camping on a GSM cell
are dual-mode MSs.
It is recommended that the 2G/3G Cell Reselection Based on MS State feature be used with the
following function:
Interoperability policies for operators, such as the requirements for setting inter-RAT cell
reselection parameters and whether GSM-to-WCDMA CS handover is required: Used to
properly set specific parameters and determine whether to enable specific functions.
Interoperability policies for operators, such as the requirements for setting inter-RAT cell
reselection parameters and whether GSM-to-WCDMA CS handover is required: Used to
properly set specific parameters and determine whether to enable specific functions.
Before deploying the BSC supporting Blind Search feature, collect the following information:
Interoperability policies for operators, such as the requirements for setting inter-RAT cell
reselection parameters and whether GSM-to- WCDMA/TD-SCDMA CS handover is
required: Used to properly set specific parameters and determine whether to enable specific
functions.
10.3 Planning
10.3.1 GSM/WCDMA Interoperability
RF Planning
N/A
Network Planning
For GSM cells to be enabled with the GSM/WCDMA Interoperability feature, plan neighboring
cell configurations based on the topology of the adjacent WCDMA network. A GSM cell can be
configured with a maximum of 64 neighboring WCDMA cells. These neighboring cells can use
a maximum of three frequencies, with each frequency supporting a maximum of 32 neighboring
WCDMA cells.
Hardware Planning
N/A
N/A
Network Planning
N/A
Hardware Planning
N/A
N/A
Network Planning
N/A
Hardware Planning
N/A
N/A
Network Planning
N/A
Hardware Planning
N/A
N/A
Network Planning
Hardware Planning
N/A
N/A
Network Planning
N/A
Hardware Planning
N/A
Requirement
Related features
BSC
None
BTS
None
Aspect
Requirement
GSM networking
None
MS
MSC
None
License
Others
10.5.2 Activation
Using MML Commands
5. (Optional) If the BA2 list has not been configured, run the SET GCELLHOFDDBA2
command with FDDBA2 Input Tag set to an appropriate value.
6. Run the SET BSCBASIC command with A Interface Tag and Um Interface Tag set to
GSM_PHASE_2Plus.
7. Run the SET OTHSOFTPARA command with Support Sent 2QUATER, Send 3G
Class Flag, and Classmark Enquiry With 3G Request set to YES(Yes).
8. Run the SET GCELLSOFT command with Query Classmark after In-BSC HO
Enabled set to YES(Yes).
9. Run the SET GCELLCCBASIC command to set basic call control parameters of a cell.
In this step, set ECSC to YES(Yes).
10. Run the SET GCELLCCUTRANSYS command to set call control UTRAN SI
parameters of a cell. In this step, set Qsearch I, Qsearch P, and Qsearch C to 7, and set
Qsearch C Initial to Always(Always).
11. Run the SET GCELLHOBASIC command with Inter-RAT Cell Reselection Enable set
to YES(Yes).
12. (Optional) Run the SET GCELLHOBASIC command to set basic handover parameters
of a cell. In this step, set Inter-RAT Out BSC Handover Enable and Inter-RAT In BSC
Handover Enable to YES(Yes).
13. (Optional) Run the SET GCELLHOUTRANFDD command to set UTRAN FDD
handover parameters of a cell. In this step, set Better 3G Cell HO Allowed to YES(Yes),
set Inter-rat HO Preference to Pre_3G_Cell(Preference for 3G cell), and set RSCP
Threshold for Better 3G Cell HO and Ec/No Threshold for Better 3G Cell HO to 0.
14. (Optional) Run the MOD G3GNCELL command with FDD 3G Better Cell HO Watch
Time, FDD 3G Better Cell HO Valid Time, RSCP Offset, and Ec/No Offset set based
on actual conditions.
15. (Optional) Run the SET GCELLMOCN command with MOCN Interoperability Policy
Switch set to ON(On).
16. (Optional) Run the ADD GCELLMOCNINTERRAT command with Operator Better
3G Cell HO Allowed, Operator 2G Cell HO Preference Threshold, Operator Better
3G Cell HO RSCP Threshold, and Operator Better 3G Cell HO Ec/No Threshold set
for different operators sharing the cell based on actual conditions.
NOTE:
When configuring the GSM/WCDMA Interoperability feature on the CME, you must perform a single configuration
first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the
CME configuration interface to start the batch modification wizard. For the method of
performing batch modifications through the CME batch modification center, press F1 on the
wizard interface to obtain online help.
Table 10-2 Configuring parameters on the CME
SN
NE
Parameter
Name
Parameter ID
GEXT3GCELL
UTRANCELLTYPE
2
(Optional)
GCELLCCUTRANSYS
BSC6900/BSC6910 SI 2Quater
Optimization
SI2QUATEROPTIMIZEDALLOWE
NOTE:
Configure this MO when
Utran Cell Type is set to
FDD(FDD).
G3GNCELL
4(Optional) GCELL2GBA1
SI 2QUATER FirstSI2QuaterMsgOptSw
IE Downsizing
Switch
BSC6900/BSC6910 Index Type
IDTYPE
Source Cell
Index
SRC3GNCELLID
Neighbor Cell
Index
NBR3GNCELLID
CELL2GBA1TAG
CELL2GBA1OPTSW
SN
5(Optional) GCELL2GBA2
NE
Parameter
Name
BSCBASIC
BSC6900/BSC6910 A Interface
Tag
Um Interface
Tag
OTHSOFTPARA
Parameter ID
CELL2GBA2TAG
CELL2GBA2OPTSW
AVer
UmVer
Send2QuterFlag
Send 3G
Class Flag
SendUtranECSCFlag
Classmark
Enquiry With
3G Request
CLASSMARKQUERY
GCELLSOFT
BSC6900/BSC6910 Query
Classmark
after In-BSC
HO Enabled
QUERYCMAFTERINBSCHO
GCELLCCBASIC
BSC6900/BSC6910 ECSC
ECSC
10
GCELLCCUTRANSYS
BSC6900/BSC6910 Qsearch I
QI
Qsearch P
QP
SN
NE
Parameter
Name
Parameter ID
Qsearch C
QSEARCHC
Qsearch C
Initial
QCI
11
GCELLHOBASIC
12
(Optional)
GCELLHOBASIC
13
(Optional)
GCELLHOUTRANFDD
INTERRATINBSCHOEN
HOOPTSEL
BSC6900/BSC6910 RSCP
HORSCPTH3G
Threshold for
Better 3G Cell
HO
BSC6900/BSC6910 Ec/No
HOECNOTH3G
Threshold for
Better 3G Cell
HO
14
(Optional)
G3GNCELL
BSC6900/BSC6910 FDD 3G
HOSTAT3G
Better Cell HO
Watch Time
BSC6900/BSC6910 FDD 3G
HODURT3G
Better Cell HO
Valid Time
BSC6900/BSC6910 RSCP Offset
RSCPOFF
ECNOOFF
SN
NE
Parameter
Name
Parameter ID
15
(Optional)
GCELLMOCN
BSC6900/BSC6910 MOCN
MOCNInterRatPolicySw
Interoperability
Policy Switch
16
(Optional)
OpHOPreTh2G
BSC6900/BSC6910 Operator
OpHORSCPTh3G
Better 3G Cell
HO RSCP
Threshold
BSC6900/BSC6910 Operator
OpHOEcNoTh3G
Better 3G Cell
HO Ec/No
Threshold
This feature can be batch activated using the CME. For detailed operations, see the following
section in the CME product documentation or online help: CME Management > CME
Guidelines > Enhanced Feature Management > Feature Operation and Maintenance.
Expected result: The BSC sends the MSC a Handover Required message with a cause
value such as "better-cell" or "directed-retry".
4. Move the MS in a GSM or WCDMA cell to trigger a cell reselection between GSM and
WCDMA. For example, the MS will initiate a GSM-to-UMTS cell reselection when the
Ec/N0 and Received Signal Code Power (RSCP) of the Common Pilot Channel (CPICH)
are normal during the neighboring cell measurement of the WCDMA FDD cell and both
the following conditions are met within 5 seconds:
CPICH RSCP > RLA_C + FDD Q Offset
CPICH Ec/N0 > FDD Qmin
5. Check whether the frequency information of the MS indicates the cell where the MS is
located. Expected result: When the MS is in a GSM cell, the frequency information of the
MS indicates that the MS is in a GSM cell. When the MS is in a WCDMA cell, the
frequency information of the MS indicates that the MS is in a WCDMA cell.
10.5.4 Deactivation
Using MML Commands
NOTE:
When configuring the GSM/WCDMA Interoperability feature on the CME, you must perform a single configuration
first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
performing batch modifications through the CME batch modification center, press F1 on the
wizard interface to obtain online help.
Table 10-3 Configuring parameters on the CME
SN
MO
G3GNCELL
NE
Parameter
Name
BSC6900/BSC6910 Index
Type
Parameter ID
IDTYPE
Source
Cell Index
SRC3GNCELLID
Neighbor
Cell Index
NBR3GNCELLID
IDTYPE
Configurable
in CME
Batch
Modification
Center
No
No
EXT3GCELLID
Requirement
Related features
BSC
None
BTS
None
GSM networking
None
MS
MSC
None
License
Aspect
Requirement
10.6.2 Activation
Using MML Commands
Set Qsearch I to 7.
3. Run the SET GCELLCCUTRANSYS command, set Switch of Sending PMO With QP
to ON(on).
4. (Optional) When Utran Cell Type is set to TDD(TDD), to modify the UTRAN SI
parameter related to call control in a cell, run the SET GCELLCCUTRANSYS command
with TDD System Information Optimized Allowed set to YES(Yes).
5. (Optional) When Utran Cell Type is set to FDD(FDD), to modify the UTRAN SI
parameters related to call control in a cell, run the SET GCELLCCUTRANSYS
command with SI 2Quater Optimization set to YES(YES) and SI 2QUATER IE
Downsizing Switch to ON(On).
MML Command Examples
NOTE:
When configuring the 2G/3G Cell Reselection Based on MS State feature on the CME, you must perform a single
configuration first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
NE
Parameter
Name
Parameter ID
GCELLHOBASIC
BSC6900/BSC6910 Inter-RAT
INTERRATCELLRESELEN
Cell
Reselection
Enable
GCELLCCUTRANSYS
BSC6900/BSC6910 Qsearch I
QI
BSC6900/BSC6910 Qsearch P
QP
BSC6900/BSC6910 Qsearch C
Initial
QCI
SendPmoWithQpSw
SN
NE
Parameter
Name
Parameter ID
Sending
PMO With
QP
4
GCELLCCUTRANSYS
(Optional)
NOTE:
BSC6900/BSC6910 TDD
System
Information
Optimized
Configure this MO when Utran
Allowed
Cell Type is set to TDD(TDD).
5
GCELLCCUTRANSYS
(Optional)
NOTE:
TDDSIOPTIMIZEDALLOWED
SI
2QUATER
IE
Downsizing
Switch
FirstSI2QuaterMsgOptSw
10.6.4 Deactivation
Using MML Commands
On the BSC LMT, run the SET GCELLHOBASIC command to set basic handover control
parameters of a cell. In this step, set Inter-RAT Cell Reselection Enable to NO(No).
NOTE:
When configuring the 2G/3G Cell Reselection Based on MS State feature on the CME, you must perform a single
configuration first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
MO
NE
Parameter
Name
Parameter ID
Configurable
in CME
Batch
Modification
Center
Requirement
Related features
BSC
None
Aspect
Requirement
BTS
None
GSM networking
None
MS
MSC
None
License
Others
10.7.2 Activation
Using MML Commands
NOTE:
When configuring the GSM/WCDMA Service Based Handover feature on the CME, you must perform a single
configuration first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
GCELLHOBASIC
NE
Parameter
Name
BSC6900/BSC6910 Inter-RAT
Out BSC
Handover
Enable
Inter-RAT
In BSC
Handover
Enable
Parameter ID
INTERRATOUTBSCHOEN
Configurab
in CME
Batch
Modificatio
Center
Yes
INTERRATINBSCHOEN
InterRatServiceLoadHoSwitch
Yes
SN
NE
Parameter
Name
Parameter ID
Configurab
in CME
Batch
Modificatio
Center
in Access
State
3
GCELLHOUTRANFDD
BSC6900/BSC6910 Better 3G
Cell HO
Allowed
BET3GHOEN
Yes
Inter-rat
HOOPTSEL
HO
Preference
G3GNCELL
RSCP
Threshold
for Better
3G Cell
HO
HORSCPTH3G
Ec/No
Threshold
for Better
3G Cell
HO
HOECNOTH3G
BSC6900/BSC6910 FDD 3G
HOSTAT3G
Better Cell
HO Watch
Time
Yes
FDD 3G
HODURT3G
Better Cell
HO Valid
Time
OTHSOFTPARA
RSCP
Offset
RSCPOFF
Ec/No
Offset
ECNOOFF
BSC6900/BSC6910 Service
Based
Handover
Switch
Service
OUTSYSSERVICEHOEN
OUTSYSSERVHOREASSIGNEN
Yes
SN
NE
Parameter
Name
Parameter ID
Handover
Reassign
This feature can be batch activated using the CME. For detailed operations, see the following
section in the CME product documentation or online help: CME Management > CME
Guidelines > Enhanced Feature Management > Feature Operation and Maintenance.
10.7.4 Deactivation
Using MML Commands
NOTE:
Configurab
in CME
Batch
Modificatio
Center
When configuring the GSM/WCDMA Service Based Handover feature on the CME, you must perform a single
configuration first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
MO
1
GCELLHOBASIC
(Optional)
NE
Parameter
Name
Parameter ID
Config
in C
Bat
Modifi
Cen
Yes
Inter-RAT INTERRATINBSCHOEN
In BSC
Handover
Enable
2
Requirement
Aspect
Requirement
Related features
BSC
None
BTS
None
GSM networking
None
MS
MSC
None
License
Others
10.8.2 Activation
Using MML Commands
NOTE:
When configuring the GSM/WCDMA Load Based Handover feature on the CME, you must perform a single
configuration first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
SN
GCELLHOBASIC
NE
Parameter
Name
Parameter ID
Configurable
in CME
Batch
Modification
Center
Yes
Inter-RAT INTERRATINBSCHOEN
In BSC
Handover
Enable
2
OTHSOFTPARA
BSC6900/BSC6910 CS 2G
G2G3GLdBlcDeltaThrd
3G Load
Balance
Delta
Threshold
Yes
Yes
Allow
InterRatServiceLoadHoSwitch
Inter-RAT
Load HO
in Access
State
4
GEXT3GCELL
BSC6900/BSC6910 Load
LoadAccThres
handover
Load
Accept
Threshold
Yes
GCELLHOAD
BSC6900/BSC6910 Load
LoadAccThres
handover
Load
Accept
Threshold
Yes
This feature can be batch activated using the CME. For detailed operations, see the following
section in the CME product documentation or online help: CME Management > CME
Guidelines > Enhanced Feature Management > Feature Operation and Maintenance.
10.8.4 Deactivation
Using MML Commands
NOTE:
When configuring the GSM/WCDMA Load Based Handover feature on the CME, you must perform a single
configuration first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the
CME configuration interface to start the batch modification wizard. For the method of
performing batch modifications through the CME batch modification center, press F1 on the
wizard interface to obtain online help.
Table 10-12 Configuring parameters on the CME
SN
MO
1(Optional) GCELLHOBASIC
NE
Parameter
Name
Parameter ID
Confi
in
B
Modi
Ce
Yes
Inter-RAT INTERRATINBSCHOEN
In BSC
Handover
Enable
2
Requirement
Related features
BSC
None
BTS
None
Yes
Aspect
Requirement
GSM networking
None
MS
MSC
None
License
Others
None
10.9.2 Activation
Using MML Commands
5. Run the SET OTHSOFTPARA command with Fast Reselection During Location
Update set to YES(Yes).
MML Command Examples
NOTE:
When configuring the Fast WCDMA Reselection at 2G CS Call Release feature on the CME, you must perform a
single configuration first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
performing batch modifications through the CME batch modification center, press F1 on the
wizard interface to obtain online help.
Table 10-14 Configuring parameters on the CME
SN
MO
GEXT3GCELL
NE
Parameter
Name
Parameter ID
EXT3GCELLNAME
MCC
MCC
MNC
MNC
Cell LAC
LAC
Cell CI
CI
RNC ID
RNCID
DL
UARFCN
DF
Configurable
in CME
Batch
Modification
Center
Yes
Scrambling SCRAMBLE
Code or Cell
Parameter
Id
G3GNCELL
Diversity
DIVERSITY
Utran Cell
Type
UTRANCELLTYPE
IDTYPE
No
BSCBASIC
BSC6900/BSC6910 Neighbor
Cell Index
NBR3GNCELLID
BSC6900/BSC6910 A Interface
Tag
AVer
Um
Interface
Tag
UmVer
Abis
AbisVer
Yes
SN
MO
NE
Parameter
Name
Parameter ID
Configurable
in CME
Batch
Modification
Center
Interface
Tag
4
GCELLCCAD
NOTE:
Configure this MO
when Inter-RAT
Out BSC Handover
Enable is set to
YES(Yes).
GCELLHOBASIC
NOTE:
Configure this MO
when Inter-RAT
Out BSC Handover
Enable is set to
NO(No).
OTHSOFTPARA
NOTE:
Configure this MO
when Inter-RAT
Out BSC Handover
Enable is set to
NO(No).
GCELLCCAD
NOTE:
Select 3G
Cell After
Call
Release
CELLSELECTAFTERCALLREL
Inter-RAT
INTERRATCELLRESELEN
Cell
Reselection
Enable
Inter-RAT
INTERRATCELLRESELOPTEN
Cell
Reselection
Optimization
Select 3G
Cell After
Call
CELLSELECTAFTERCALLREL
Yes
SN
MO
NE
Configure this MO
when Inter-RAT
Out BSC Handover
Enable is set to
NO(No).
Parameter
Name
Parameter ID
Configurable
in CME
Batch
Modification
Center
Release
Yes
This feature can be batch activated using the CME. For detailed operations, see the following
section in the CME product documentation or online help: CME Management > CME
Guidelines > Enhanced Feature Management > Feature Operation and Maintenance.
4. From the MS's logs, check the GSM-to-WCDMA cell reselection duration. That is, check
the duration from when the MS receives the Channel Release message from the BSC on
the GSM network to when the MS sends the RRC CONNECTION REQUEST message on
the WCDMA network.
Expected result: The GSM-to-WCDMA cell reselection duration decreases after this
feature is enabled.
10.9.4 Deactivation
Using MML Commands
On the BSC LMT, run the SET GCELLCCAD command with Select 3G Cell After Call
Release set to NO(No) for GSM cell 0.
MML Command Examples
NOTE:
When configuring the Fast WCDMA Reselection at 2G CS Call Release feature on the CME, you must perform a
single configuration first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
Set parameters on the CME configuration interface according to the operation sequence
described in Table 10-15. For the method of performing the CME single configuration, see
CME Single Configuration Operation Guide.
2. (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the
CME configuration interface to start the batch modification wizard. For the method of
performing batch modifications through the CME batch modification center, press F1 on the
wizard interface to obtain online help.
Table 10-15 Configuring the parameter on the CME
SN
MO
NE
Parameter
Name
Parameter ID
Configurable
in CME
Batch
Modification
Center
Requirement
Related features
BSC
None
BTS
None
GSM networking
None
MS
MSs support both GSM and WCDMA networks and bidirectional cell
reselection and handovers between GSM and WCDMA.
MSC
None
License
The license controlling this feature has been activated. For details on
how to activate the license, see License Management Feature
Parameter Description. For details about license items, see License
Control Item Description.
Aspect
Requirement
Others
10.10.2 Activation
Using MML Commands
If all cells under the BSC use the same neighboring UARFCN:
Run the SET G3GARFCN command to configure UARFCNs for the BSC. In this
step, set 3G ARFCNs for Cell Reselection to YES(Yes).
Run the SET GCELL3GARFCN command with 3G ARFCNs for Cell Reselection
set to YES(Yes) and 3G ARFCN Send Type to 3GARFCN(3G ARFCN).
3. Run the SET BSCBASIC command with A Interface Tag, Um Interface Tag, and Abis
Interface Tag set to GSM_PHASE_2Plus.
4. Run the SET OTHSOFTPARA command with Support Sent 2QUATER set to
YES(Yes).
5. Run the SET GCELLCCUTRANSYS command to set call control UTRAN SI
parameters of a cell. In this step, set Qsearch I, Qsearch P, and Qsearch C to 7, and set
Qsearch C Initial to Always(Always).
MML Command Examples
//Activating BSC supporting Blind Search if each cell uses its user-defined neighboring
UARFCNs
SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, INTERRATCELLRESELEN=YES;
SET GCELL3GARFCN: IDTYPE=BYID, CELLID=0, INPUT3GARFCNEN=YES,
INPUT3GARFCNENTYPE=FDD, N3GARFCNSENDTYPE=3GARFCN, ARFCN1=10;
NOTE:
When configuring the BSC supporting Blind Search feature on the CME, you must perform a single configuration
first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
SN
NE
Parameter
Name
Parameter ID
Configurable
in CME
Batch
Modification
Center
GCELLHOBASIC
GCELL3GARFCN
CELLID
Yes
NOTE:
Configure this MO if each
cell uses its user-defined
neighboring UARFCNs.
G3GARFCN
NOTE:
Configure this MO if all
cells under the BSC use the
same neighboring
UARFCN.
GCELL3GARFCN
NOTE:
Configure this MO if all
cells under the BSC use the
same neighboring
UARFCN.
GCELL3GARFCN
BSC6900/BSC6910 3G
INPUT3GARFCNEN
ARFCNs
for Cell
Reselection
Yes
BSC6900/BSC6910 3G
INPUT3GARFCNEN
ARFCNs
for Cell
Reselection
Yes
Yes
Yes
NOTE:
Configure this MO if all
cells under the BSC use the
same neighboring
UARFCN.
BSCBASIC
Um
Interface
UmVer
SN
NE
Parameter
Name
Parameter ID
Configurable
in CME
Batch
Modification
Center
Tag
Abis
Interface
Tag
4
OTHSOFTPARA
BSC6900/BSC6910 Support
Sent
2QUATER
AbisVer
Send2QuterFlag
Yes
QI
Yes
Qsearch C
QSEARCHC
Qsearch P
QP
Qsearch C
Initial
QCI
When the MS is in a GSM cell, the frequency information of the MS indicates that the
MS is in a GSM cell.
When the MS is in a UMTS cell, the frequency information of the MS indicates that
the MS is in a UMTS cell.
3. Enable the blind search function and configure TDD UARFCNs. Move the MS within a
GSM or TD-SCDMA cell, and ensure that the Ec/N0 and RSCP of the CPICH are normal
during the neighboring cell measurement of the TD-SCDMA FDD cell. If the following
When the MS is in a GSM cell, the frequency information of the MS indicates that the
MS is in a GSM cell.
10.10.4 Deactivation
Using MML Commands
If all cells under the BSC use the same neighboring UARFCN:
Run the SET G3GARFCN command to with 3G ARFCNs for Cell Reselection set to
NO(No).
//Deactivating BSC supporting Blind Search if each cell uses its user-defined neighboring
UARFCNs:
SET GCELL3GARFCN: IDTYPE=BYID, CELLID=0, INPUT3GARFCNEN=NO;
SET G3GARFCN: INPUT3GARFCNEN=NO;
//Deactivating BSC supporting Blind Search if all cells under the BSC use the same neighboring
UARFCN
SET G3GARFCN: INPUT3GARFCNEN=NO;
Using the CME
NOTE:
When configuring the BSC supporting Blind Search feature on the CME, you must perform a single configuration
first, and then perform batch modifications if required.
You must perform a single configuration for a parameter before batch modifications of the parameter. You are
advised to perform batch modifications before logging out of the parameter setting interface.
Set parameters on the CME configuration interface according to the operation sequence
described in Table 10-18 and Table 10-19. For the method of performing the CME single
configuration, see CME Single Configuration Operation Guide.
2. (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the
CME configuration interface to start the batch modification wizard. For the method of
performing batch modifications through the CME batch modification center, press F1 on the
wizard interface to obtain online help.
MO
NE
Parameter
Name
Parameter ID
Configurable
in CME
Batch
Modification
Center
GCELL3GARFCN BSC6900/BSC6910 3G
INPUT3GARFCNEN Yes
ARFCNs
G3GARFCN
BSC6900/BSC6910 for Cell
No
Reselection
If all cells under the BSC use the same neighboring UARFCN:
MO
NE
Parameter
Name
Parameter ID
Configurable
in CME
Batch
Modification
Center
G3GARFCN BSC6900/BSC6910 3G
INPUT3GARFCNEN No
ARFCNs
for Cell
Reselection
Monitor the number of allowed FDD calls to check whether the GSM/WCDMA Interoperability
and 2G/3G Cell Reselection Based on MS State features need to be optimized.
Parameter Optimization
If the number of allowed FDD calls is great, MSs are likely to camp on GSM cells. In addition to
optimizing WCDMA coverage, modify the settings of SI-related parameters to increase the
possibility of GSM-to-WCDMA cell reselection. You are advised to set
QI(BSC6900,BSC6910) to 7 to ensure that MSs always search for 3G cells. In addition, you
are advised to set FDDQMINOFFSET(BSC6900,BSC6910),
FDDRSCPMIN(BSC6900,BSC6910), and FDDQMIN(BSC6900,BSC6910) to small
values, and FDDQOFF(BSC6900,BSC6910) to a large value.
Monitor the inter-RAT outgoing cell handover success rate and call drop rate to check whether
the GSM/WCDMA Service Based Handover and GSM/WCDMA Load Based Handover features
need to be optimized.
Parameter Optimization
10.12 Troubleshooting
None
11
Parameters
NE
MML Command
Feature
ID
Feature Name
FDDREP
BSC6900 SET
GCELLCCUTRANSYS
FDDREP
BSC6910 SET
GCELLCCUTRANSYS
HOECNOTH3G
BSC6900 SET
GCELLHOUTRANFDD
Parameter ID
NE
MML Command
Feature
ID
Feature Name
param
detail
proto
0: CP
1: -24
2: -23
...
47: -1
48: -0
49: 0
GUI V
Unit:
Actua
Defau
HOECNOTH3G
BSC6910 SET
GCELLHOUTRANFDD
Parameter ID
NE
MML Command
Feature
ID
Feature Name
ECNOOFF
ECNOOFF
Parameter ID
NE
MML Command
Feature
ID
Feature Name
The d
param
detail
proto
0: CP
1: -24
2: -23
...
47: -1
48: -0
49: 0
GUI V
Unit:
Actua
Defau
OpHOEcNoTh3G
BSC6900 ADD
GCELLMOCNINTERRAT
MOD
GCELLMOCNINTERRAT
GBFD114301
GBFD118702
GBFD160212
GSM/WCDMA
Interoperability
MOCN Shared
Cell
MOCN II
Mean
Ec/No
better
opera
If the
GCEL
to Ec
hando
when
neigh
sum o
the va
in the
within
param
speci
The v
to the
see 3
0: CP
1: -24
2: -23
...
47: -1
48: -0
49: 0
GUI V
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Unit:
Actua
Defau
OpHOEcNoTh3G
BSC6910 ADD
GCELLMOCNINTERRAT
MOD
GCELLMOCNINTERRAT
GBFD114301
GBFD118702
GBFD160212
GSM/WCDMA
Interoperability
MOCN Shared
Cell
MOCN II
Mean
Ec/No
better
opera
If the
GCEL
to Ec
hando
when
neigh
sum o
the va
in the
within
param
speci
The v
to the
see 3
0: CP
1: -24
2: -23
...
47: -1
48: -0
49: 0
GUI V
Unit:
Actua
Defau
MOCNInterRatPolicySw
GBFD114301
GBFD118702
GBFD160212
GSM/WCDMA
Interoperability
MOCN Shared
Cell
MOCN II
Mean
intero
opera
When
opera
an MO
param
GCEL
param
intero
Parameter ID
NE
MML Command
Feature
ID
Feature Name
enabl
settin
"SET
GUI V
Unit:
Actua
Defau
MOCNInterRatPolicySw
GBFD114301
GBFD118702
GBFD160212
GSM/WCDMA
Interoperability
MOCN Shared
Cell
MOCN II
Mean
intero
opera
When
opera
an MO
param
GCEL
param
intero
enabl
settin
"SET
GUI V
Unit:
Actua
Defau
OpHOPreTh2G
BSC6900 ADD
GCELLMOCNINTERRAT
MOD
GCELLMOCNINTERRAT
GBFD114301
GBFD118702
GBFD160212
GSM/WCDMA
Interoperability
MOCN Shared
Cell
MOCN II
Mean
of can
MOC
receiv
cells i
than o
param
cell a
neigh
the M
hande
param
speci
GUI V
Unit:
Actua
Defau
OpHOPreTh2G
BSC6910 ADD
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GCELLMOCNINTERRAT
MOD
GCELLMOCNINTERRAT
114301
GBFD118702
GBFD160212
Interoperability
MOCN Shared
Cell
MOCN II
of can
MOC
receiv
cells i
than o
param
cell a
neigh
the M
hande
param
speci
GUI V
Unit:
Actua
Defau
OpBet3GHOEn
BSC6900 ADD
GCELLMOCNINTERRAT
MOD
GCELLMOCNINTERRAT
GBFD114301
GBFD118702
GBFD160212
GSM/WCDMA
Interoperability
MOCN Shared
Cell
MOCN II
Mean
opera
perfor
param
speci
set to
be trig
When
3G ce
for MS
GUI V
Unit:
Actua
Defau
OpBet3GHOEn
BSC6910 ADD
GCELLMOCNINTERRAT
MOD
GCELLMOCNINTERRAT
GBFD114301
GBFD118702
GBFD160212
GSM/WCDMA
Interoperability
MOCN Shared
Cell
MOCN II
Mean
opera
perfor
param
speci
set to
be trig
When
3G ce
for MS
GUI V
Unit:
Actua
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Defau
OpHORSCPTh3G
BSC6900 ADD
GCELLMOCNINTERRAT
MOD
GCELLMOCNINTERRAT
GBFD114301
GBFD118702
GBFD160212
GSM/WCDMA
Interoperability
MOCN Shared
Cell
MOCN II
Mean
RSCP
better
opera
better
for an
of a n
the su
and th
"ADD
corre
within
param
speci
The v
to the
see 3
0: CP
1: -11
dBm
2: -11
dBm
...
61: -5
62: -5
63: -5
GUI V
Unit:
Actua
Defau
OpHORSCPTh3G
BSC6910 ADD
GCELLMOCNINTERRAT
MOD
GCELLMOCNINTERRAT
GBFD114301
GBFD118702
GBFD160212
GSM/WCDMA
Interoperability
MOCN Shared
Cell
MOCN II
Mean
RSCP
better
opera
better
for an
of a n
the su
and th
"ADD
corre
within
Parameter ID
NE
MML Command
Feature
ID
Feature Name
param
speci
The v
to the
see 3
0: CP
1: -11
dBm
2: -11
dBm
...
61: -5
62: -5
63: -5
GUI V
Unit:
Actua
Defau
PFCSwitch
BSC6900 SET
GCELLPSOTHERPARA
GBFD119502
GBFD119905
GBFD119907
GBFD119906
GBFD119902
PS Handover
PoC QoS
PS Service in
Priority
Conversational
QoS
QoS
ARP&THP
Mean
Packe
that c
of pac
takes
servic
and th
suppo
YES.
GUI V
Unit:
Actua
Defau
PFCSwitch
BSC6910 SET
GCELLPSOTHERPARA
GBFD119502
GBFD119905
GBFD119907
GBFD119906
GBFD119902
PS Handover
PoC QoS
PS Service in
Priority
Conversational
QoS
QoS
ARP&THP
Mean
Packe
that c
of pac
takes
servic
and th
suppo
YES.
GUI V
Unit:
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Actua
Defau
Send2QuterFlag
GBFD- System
111101 Information
Sending
Mean
wheth
the 2Q
GUI V
Unit:
Actua
Defau
Send2QuterFlag
GBFD- System
111101 Information
Sending
Mean
wheth
the 2Q
GUI V
Unit:
Actua
Defau
FirstSI2QuaterMsgOptSw
BSC6900 SET
GCELLCCUTRANSYS
FirstSI2QuaterMsgOptSw
BSC6910 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Defau
SI2QUATEROPTIMIZEDALLOWED
BSC6900 SET
GCELLCCUTRANSYS
SI2QUATEROPTIMIZEDALLOWED
BSC6910 SET
GCELLCCUTRANSYS
GSMFREQCNUM
BSC6900 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Thres
Thres
2. Th
valid.
3. Th
must
neigh
band.
GUI V
Unit:
Actua
Defau
GSMFREQCNUM
BSC6910 SET
GCELLCCUTRANSYS
FDDBA1TAG
Parameter ID
NE
MML Command
Feature
ID
Feature Name
neigh
MANU
the B
neigh
chang
cell is
maint
yours
GUI V
MANU
Unit:
Actua
Defau
FDDBA1TAG
FDDBA2TAG
MRFD- Configuration
210301 Management
Mean
wheth
autom
relatio
manu
GUI V
MANU
Unit:
Actua
Defau
FDDBA2TAG
MRFD- Configuration
Mean
wheth
Parameter ID
NE
MML Command
Feature
ID
Feature Name
210301 Management
autom
relatio
manu
GUI V
MANU
Unit:
Actua
Defau
DF
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
extern
GUI V
Unit:
Actua
Defau
DF
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
extern
GUI V
Unit:
Actua
Defau
SCRAMBLE
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
When
FDD(
scram
"UTR
this p
param
This p
differe
are u
There
not ch
differe
Scram
from
sprea
to diff
and d
down
GUI V
Unit:
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Actua
Defau
SCRAMBLE
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
When
FDD(
scram
"UTR
this p
param
This p
differe
are u
There
not ch
differe
Scram
from
sprea
to diff
and d
down
GUI V
Unit:
Actua
Defau
DIVERSITY
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
divers
cell
GUI V
Unit:
Actua
Defau
DIVERSITY
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
divers
cell
GUI V
Unit:
Actua
Defau
UTRANCELLTYPE
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GBFD- GSM/TDFrequ
114302 SCDMA
Divisi
Interoperability GUI V
Unit:
Actua
Defau
UTRANCELLTYPE
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
type o
Frequ
Divisi
GUI V
Unit:
Actua
Defau
SYNCCASE
GBFD- GSM/TDMean
114302 SCDMA
param
Interoperability cells.
with t
GUI V
1), Sy
Unit:
Actua
SyncC
Defau
SYNCCASE
GBFD- GSM/TDMean
114302 SCDMA
param
Interoperability cells.
with t
GUI V
1), Sy
Unit:
Actua
SyncC
Defau
ITEM
Mean
in a B
GUI V
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
ITEM
Mean
in a B
GUI V
Unit:
Actua
Defau
ITEMVALID
Mean
param
param
param
config
GUI V
TRUE
Unit:
Actua
Defau
ITEMVALID
Mean
param
param
param
config
GUI V
TRUE
Unit:
Actua
Defau
FDDDLUARFAN
FDDDLUARFAN
Parameter ID
NE
MML Command
Feature
ID
Feature Name
vary w
GUI V
Unit:
Actua
Defau
FDDSCRAMBLE
FDDSCRAMBLE
Parameter ID
NE
MML Command
Feature
ID
Feature Name
FDDDIVERSITY
FDDDIVERSITY
ITEM
MRFD- Configuration
210301 Management
Mean
in a B
GUI V
Unit:
Actua
Defau
ITEM
MRFD- Configuration
210301 Management
Mean
in a B
GUI V
Unit:
Actua
Defau
ITEMVALID
MRFD- Configuration
210301 Management
Mean
param
param
param
config
GUI V
TRUE
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
ITEMVALID
MRFD- Configuration
210301 Management
Mean
param
param
param
config
GUI V
TRUE
Unit:
Actua
Defau
DF
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
extern
GUI V
Unit:
Actua
Defau
DF
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
extern
GUI V
Unit:
Actua
Defau
SCRAMBLE
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
When
FDD(
scram
"UTR
this p
param
This p
differe
are u
There
not ch
differe
Scram
from
sprea
to diff
and d
down
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GUI V
Unit:
Actua
Defau
SCRAMBLE
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
When
FDD(
scram
"UTR
this p
param
This p
differe
are u
There
not ch
differe
Scram
from
sprea
to diff
and d
down
GUI V
Unit:
Actua
Defau
DIVERSITY
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
divers
cell
GUI V
Unit:
Actua
Defau
DIVERSITY
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
divers
cell
GUI V
Unit:
Actua
Defau
Parameter ID
QI
NE
MML Command
BSC6900 SET
GCELLCCUTRANSYS
Feature
ID
Feature Name
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
In idle
servin
speci
param
the th
(when
15]), t
For e
and if
lower
3G ce
if the
above
for 3G
The v
to the
0: -98
1: -94
2: -90
3: -86
4: -82
5: -78
6: -74
7: (alw
searc
8: -78
9: -74
10: -7
11: -6
12: -6
13: -5
14: -5
15: P
MS d
GUI V
Unit:
Actua
-98, -78, infinit
Defau
Parameter ID
QI
NE
MML Command
BSC6910 SET
GCELLCCUTRANSYS
Feature
ID
Feature Name
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
In idle
servin
speci
param
the th
(when
15]), t
For e
and if
lower
3G ce
if the
above
for 3G
The v
to the
0: -98
1: -94
2: -90
3: -86
4: -82
5: -78
6: -74
7: (alw
searc
8: -78
9: -74
10: -7
11: -6
12: -6
13: -5
14: -5
15: P
MS d
GUI V
Unit:
Actua
-98, -78, infinit
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
QP
BSC6900 SET
GCELLCCUTRANSYS
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
In pac
of the
speci
param
the th
(when
15]), t
For e
and if
lower
3G ce
if the
above
for 3G
This p
sends
to an
Order
mess
The v
to the
dBm
(alwa
dBm
GUI V
Unit:
Actua
82, -7
62, -5
Defau
QP
BSC6910 SET
GCELLCCUTRANSYS
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
In pac
of the
speci
param
the th
(when
15]), t
For e
and if
lower
3G ce
if the
above
Parameter ID
NE
MML Command
Feature
ID
Feature Name
for 3G
This p
sends
to an
Order
mess
The v
to the
dBm
(alwa
dBm
GUI V
Unit:
Actua
82, -7
62, -5
Defau
QSEARCHC
BSC6900 SET
GCELLCCUTRANSYS
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
In con
the se
speci
param
the th
(when
15]), t
cells.F
to 5 a
cell is
searc
set to
servin
starts
1: -94
...
6: -74
7: (alw
8: -78
9: -74
...
14: -5
15: P
GUI V
Unit:
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Actua
82, -7
62, -5
Defau
QSEARCHC
BSC6910 SET
GCELLCCUTRANSYS
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
In con
the se
speci
param
the th
(when
15]), t
cells.F
to 5 a
cell is
searc
set to
servin
starts
1: -94
...
6: -74
7: (alw
8: -78
9: -74
...
14: -5
15: P
GUI V
Unit:
Actua
82, -7
62, -5
Defau
QCI
BSC6900 SET
GCELLCCUTRANSYS
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
thresh
resele
""Qse
GUI V
Qsea
Unit:
Actua
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Alway
Defau
Qsea
QCI
BSC6910 SET
GCELLCCUTRANSYS
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
thresh
resele
""Qse
GUI V
Qsea
Unit:
Actua
Alway
Defau
Qsea
INTERRATCELLRESELEN
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
Whet
allowe
If this
resele
allowe
GUI V
Unit:
Actua
Defau
INTERRATCELLRESELEN
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
Whet
allowe
If this
resele
allowe
GUI V
Unit:
Actua
Defau
RIMSUP
GBFD511308
GBFD116301
eNACC
Between GSM
and LTE
Network
Assisted Cell
Change
Mean
inform
RIM p
Netwo
throug
GUI V
Parameter ID
NE
MML Command
Feature
ID
Feature Name
(NACC)
YES(
Unit:
Actua
Defau
eNACC
Between GSM
and LTE
Network
Assisted Cell
Change
(NACC)
Mean
inform
RIM p
Netwo
throug
GUI V
YES(
Unit:
Actua
Defau
RIMSUP
GBFD511308
GBFD116301
FDDQOFF
BSC6900 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
to the
0: - (a
1: -28
2: -24
...
15: 28
GUI V
Unit:
Actua
28~28
Defau
FDDQOFF
BSC6910 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
2: -24
...
15: 28
GUI V
Unit:
Actua
28~28
Defau
FDDQMIN
BSC6900 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
6: -14
7: -12
GUI V
Unit:
Actua
-10, Defau
FDDQMIN
BSC6910 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
7: -12
GUI V
Unit:
Actua
-10, Defau
FDDQMINOFFSET
BSC6900 SET
GCELLCCUTRANSYS
FDDQMINOFFSET
BSC6910 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
1.Rec
receiv
"FDD
The F
condi
2G ce
Rece
+ "FD
2. Ec/
"FDD
3. Re
Thres
based
"FDD
about
45.00
If mul
condi
the st
See 3
GUI V
Unit:
Actua
Defau
FDDRSCPMIN
BSC6900 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Thres
based
"FDD
about
45.00
If mul
condi
the st
See 3
The v
to the
0 = -1
1 = -1
2 = -1
...
14 = 15 = GUI V
Unit:
Actua
Defau
FDDRSCPMIN
BSC6910 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
"FDD
about
45.00
If mul
condi
the st
See 3
The v
to the
0 = -1
1 = -1
2 = -1
...
14 = 15 = GUI V
Unit:
Actua
Defau
SendPmoWithQpSw
BSC6900 SET
GBFD- 2G/3G Cell
GCELLRESELUTRANFDD 114323 Reselection
Based on MS
State
Mean
Whet
(carry
the up
If this
BSC
If this
BSC
GUI V
Unit:
Actua
Defau
SendPmoWithQpSw
BSC6910 SET
GBFD- 2G/3G Cell
GCELLRESELUTRANFDD 114323 Reselection
Based on MS
State
Mean
Whet
(carry
the up
If this
BSC
If this
BSC
GUI V
Unit:
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Actua
Defau
CELLSELECTAFTERCALLREL
Mean
wheth
prefer
call is
both t
netwo
GUI V
Unit:
Actua
Defau
CELLSELECTAFTERCALLREL
Mean
wheth
prefer
call is
both t
netwo
GUI V
Unit:
Actua
Defau
FASTRESELECTSW
GBFD511312
GBFD114325
Fast LTE
Reselection at
2G CS Call
Release
Fast WCDMA
Reselection at
2G CS Call
Release
Mean
Whet
during
If this
can fa
SCDM
If this
canno
UMTS
updat
GUI V
Unit:
Actua
Defau
FASTRESELECTSW
GBFD511312
GBFD114325
Fast LTE
Reselection at
2G CS Call
Release
Fast WCDMA
Mean
Whet
during
If this
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Reselection at can fa
2G CS Call
SCDM
Release
If this
canno
UMTS
updat
GUI V
Unit:
Actua
Defau
NCO
GBFD- Networking
119107 Control Mode
Mean
Netwo
of an
NC0:
autom
NC1:
repor
repor
perfor
NC2:
The M
the B
wheth
MS a
resele
fails t
the ac
is less
The n
takes
NC2 a
GCEL
GUI V
NC2(
Unit:
Actua
Defau
NCO
GBFD- Networking
119107 Control Mode
Mean
Netwo
of an
NC0:
autom
Parameter ID
NE
MML Command
Feature
ID
Feature Name
NC1:
repor
repor
perfor
NC2:
The M
the B
wheth
MS a
resele
fails t
the ac
is less
The n
takes
NC2 a
GCEL
GUI V
NC2(
Unit:
Actua
Defau
FDDFREQCNUM
BSC6900 SET
GCELLCCUTRANSYS
FDDFREQCNUM
BSC6910 SET
GCELLCCUTRANSYS
FDDCELLOFF
BSC6900 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
cell in
The v
to the
0: 0 d
1: 6 d
...
7: 42
GUI V
Unit:
Actua
Defau
FDDCELLOFF
BSC6910 SET
GCELLCCUTRANSYS
FDDCELLTHRED
BSC6900 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
...
6: 36
7: pos
GUI V
Unit:
Actua
infinit
Defau
FDDCELLTHRED
BSC6910 SET
GCELLCCUTRANSYS
PENALTYRXLEV
GBFD114301
GBFD511310
GBFD511303
GBFD511302
GBFD511306
GBFD116201
GSM/WCDMA
Interoperability
Multi
Technology
Neighbour Cell
Based
Handover
PS Handover
Between GSM
and LTE
Based on
Quality
PS Handover
Mean
mess
resele
Level
of the
resele
that m
same
only w
GUI V
Unit:
Actua
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GBFD114301
GBFD511310
GBFD511303
GBFD511302
GBFD511306
GBFD116201
GBFD511304
GSM/WCDMA
Interoperability
Multi
Technology
Neighbour Cell
Based
Handover
PS Handover
Between GSM
and LTE
Based on
Quality
PS Handover
Between GSM
and LTE
Based on
Coverage
GSM/LTE
Service Based
PS Handover
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on Cell
Load
Mean
mess
resele
Level
of the
resele
that m
same
only w
GUI V
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
TrafficReselAllow
GBFD114301
GBFD511307
GBFD511306
GBFD116201
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
GSM/LTE
Service Based
PS Handover
NetworkControlled Cell
Reselection
(NC2)
Mean
servic
is set
Techn
consi
servic
GUI V
PERM
Unit:
Actua
Defau
TrafficReselAllow
GBFD114301
GBFD511307
GBFD511306
GBFD116201
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
GSM/LTE
Service Based
PS Handover
NetworkControlled Cell
Reselection
(NC2)
Mean
servic
is set
Techn
consi
servic
GUI V
PERM
Unit:
Actua
Defau
URGENTRESELALLOW
GBFD511303
GBFD114301
GBFD511307
GBFD116201
PS Handover
Between GSM
and LTE
Based on
Quality
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
Mean
resele
meas
qualit
Ack/N
than "
numb
transm
transm
or larg
"CEL
the ce
resele
PERM
Rese
SUPP
target
you a
resele
GUI V
Parameter ID
NE
MML Command
Feature
ID
Feature Name
PERM
Unit:
Actua
Defau
URGENTRESELALLOW
GBFD511303
GBFD114301
GBFD511307
GBFD116201
PS Handover
Between GSM
and LTE
Based on
Quality
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
Mean
resele
meas
qualit
Ack/N
than "
numb
transm
transm
or larg
"CEL
the ce
resele
PERM
Rese
SUPP
target
you a
resele
GUI V
PERM
Unit:
Actua
Defau
GBFD511303
GBFD114301
GBFD511307
GBFD116201
PS Handover
Between GSM
and LTE
Based on
Quality
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
Mean
transm
param
emerg
accum
down
lower
thresh
Quali
Thres
Thres
accum
with p
receiv
meas
equal
Parameter ID
NE
MML Command
Feature
ID
Feature Name
param
emerg
GUI V
Unit:
Actua
Defau
CELLRXQUALWORSENRATIOTHRSH BSC6910 SET GCELLNC2PARA
GBFD511303
GBFD114301
GBFD511307
GBFD116201
PS Handover
Between GSM
and LTE
Based on
Quality
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
Mean
transm
param
emerg
accum
down
lower
thresh
Quali
Thres
Thres
accum
with p
receiv
meas
equal
param
emerg
GUI V
Unit:
Actua
Defau
NC2LoadResel
GBFD114301
GBFD116201
GSM/WCDMA
Interoperability
NetworkControlled Cell
Reselection
(NC2)
Mean
the ta
cell re
Supp
involv
resele
GUI V
Supp
Unit:
Actua
Defau
NC2LoadResel
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GBFD114301
GBFD511303
GBFD511302
GBFD511307
GBFD511306
GBFD116201
GBFD511304
GSM/WCDMA
Interoperability
PS Handover
Between GSM
and LTE
Based on
Quality
PS Handover
Between GSM
and LTE
Based on
Coverage
eNC2
Between GSM
and LTE
GSM/LTE
Service Based
PS Handover
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on Cell
Load
Mean
neigh
cell d
param
times
resele
of the
of this
resele
GUI V
Unit:
Actua
Defau
MINACCRXLEV
GBFD114301
GBFD511303
GBFD511302
GBFD511307
GSM/WCDMA
Interoperability
PS Handover
Between GSM
and LTE
Based on
Quality
PS Handover
Mean
neigh
cell d
param
times
resele
of the
of this
Parameter ID
RESELHYST
NE
MML Command
Feature
ID
Feature Name
GBFD511306
GBFD116201
GBFD511304
Between GSM
and LTE
Based on
Coverage
eNC2
Between GSM
and LTE
GSM/LTE
Service Based
PS Handover
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on Cell
Load
resele
GUI V
Unit:
Actua
Defau
GBFD511310
GBFD511303
GBFD511302
GBFD511306
GBFD116201
GBFD511304
Multi
Technology
Neighbour Cell
Based
Handover
PS Handover
Between GSM
and LTE
Based on
Quality
PS Handover
Between GSM
and LTE
Based on
Coverage
GSM/LTE
Service Based
PS Handover
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on Cell
Mean
resele
shoul
of targ
"Cell
"Cell
way,
GUI V
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Load
RESELHYST
GBFD511310
GBFD511303
GBFD511302
GBFD511306
GBFD116201
GBFD511304
Multi
Technology
Neighbour Cell
Based
Handover
PS Handover
Between GSM
and LTE
Based on
Quality
PS Handover
Between GSM
and LTE
Based on
Coverage
GSM/LTE
Service Based
PS Handover
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on Cell
Load
Mean
resele
shoul
of targ
"Cell
"Cell
way,
GUI V
Unit:
Actua
Defau
FDDRSCPQUALTHRSH
FDDRSCPQUALTHRSH
LOADRESELALLOW
Parameter ID
NE
MML Command
Feature
ID
Feature Name
114301
GBFD511307
GBFD116201
GBFD511304
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on Cell
Load
cell re
down
"LOA
level
"LOA
cell, t
resele
PERM
Rese
Supp
cell se
attem
resele
GUI V
PERM
Unit:
Actua
Defau
LOADRESELALLOW
GBFD114301
GBFD511307
GBFD116201
GBFD511304
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on Cell
Load
Mean
cell re
down
"LOA
level
"LOA
cell, t
resele
PERM
Rese
Supp
cell se
attem
resele
GUI V
PERM
Unit:
Actua
Defau
LOADRESELMAXRXLEV
GBFD114301
GBFD511307
GBFD116201
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Mean
When
is low
resele
GUI V
Unit:
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GBFD- Reselection
Actua
511304 (NC2)
Defau
PS Handover
Between GSM
and LTE
Based on Cell
Load
LOADRESELMAXRXLEV
GBFD114301
GBFD511307
GBFD116201
GBFD511304
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on Cell
Load
Mean
When
is low
resele
GUI V
Unit:
Actua
Defau
LOADRESELSTARTTHRSH
GBFD114301
GBFD511307
GBFD116201
GBFD511304
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on Cell
Load
Mean
down
thresh
made
GUI V
Unit:
Actua
Defau
LOADRESELSTARTTHRSH
GBFD114301
GBFD511307
GBFD116201
GBFD511304
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
Mean
down
thresh
made
GUI V
Unit:
Actua
Parameter ID
NE
MML Command
Feature
ID
Feature Name
(NC2)
Defau
PS Handover
Between GSM
and LTE
Based on Cell
Load
NORMALRESELALLOW
GBFD511302
GBFD511307
GBFD116201
GBFD114301
PS Handover
Between GSM
and LTE
Based on
Coverage
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
GSM/WCDMA
Interoperability
Mean
Whet
resele
trigge
condi
The n
conse
of a s
Repo
to the
The n
a serv
speci
than t
"RES
When
PERM
set to
consi
determ
candi
resele
GUI V
PERM
Unit:
Actua
Defau
NORMALRESELALLOW
GBFD511302
GBFD511307
GBFD116201
GBFD114301
PS Handover
Between GSM
and LTE
Based on
Coverage
eNC2
Between GSM
and LTE
NetworkControlled Cell
Mean
Whet
resele
trigge
condi
The n
conse
of a s
Repo
to the
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Reselection
(NC2)
GSM/WCDMA
Interoperability
The n
a serv
speci
than t
"RES
When
PERM
set to
consi
determ
candi
resele
GUI V
PERM
Unit:
Actua
Defau
RESELWATCHPERIOD
GBFD114301
GBFD511307
GBFD116201
GBFD511302
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on
Coverage
Mean
Meas
receiv
meas
statis
the va
resele
GUI V
Unit:
Actua
Defau
RESELWATCHPERIOD
GBFD114301
GBFD511307
GBFD116201
GBFD511302
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Mean
Meas
receiv
meas
statis
the va
resele
GUI V
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Based on
Coverage
RESELWORSENLEVTHRSH
GBFD114301
GBFD511307
GBFD116201
GBFD511302
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on
Coverage
Mean
receiv
"Norm
is low
Thres
this p
is trig
GUI V
Unit:
Actua
Defau
RESELWORSENLEVTHRSH
GBFD114301
GBFD511307
GBFD116201
GBFD511302
GSM/WCDMA
Interoperability
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
PS Handover
Between GSM
and LTE
Based on
Coverage
Mean
receiv
"Norm
is low
Thres
this p
is trig
GUI V
Unit:
Actua
Defau
INPUT3GARFCNEN
GBFD- BSC
511110 supporting
Blind Search
Mean
Whet
is sup
speci
inform
2G/3G
follow
1. Th
any n
the se
neigh
"N3G
3GAR
Parameter ID
NE
MML Command
Feature
ID
Feature Name
2. "IN
"SET
to YE
3. Th
GUI V
Unit:
Actua
Defau
INPUT3GARFCNEN
GBFD- BSC
511110 supporting
Blind Search
Mean
Whet
is sup
speci
inform
2G/3G
follow
1. Th
any n
the se
neigh
"N3G
3GAR
2. "IN
"SET
to YE
3. Th
GUI V
Unit:
Actua
Defau
INPUT3GARFCNEN
GBFD- BSC
511110 supporting
Blind Search
Mean
Whet
level
the sp
inform
resele
condi
1. Th
neigh
cells a
cells b
to 3G
2. "IN
"SET
Parameter ID
NE
MML Command
Feature
ID
Feature Name
to YE
"SET
to YE
config
GCEL
3. Th
GUI V
Unit:
Actua
Defau
INPUT3GARFCNEN
GBFD- BSC
511110 supporting
Blind Search
Mean
Whet
level
the sp
inform
resele
condi
1. Th
neigh
cells a
cells b
to 3G
2. "IN
"SET
to YE
"SET
to YE
config
GCEL
3. Th
GUI V
Unit:
Actua
Defau
N3GARFCNSENDTYPE
GBFD- BSC
511110 supporting
Blind Search
Mean
ARFC
3G ce
cell re
servin
3G ce
cell re
3GNC
config
Parameter ID
NE
MML Command
Feature
ID
Feature Name
2Qua
neigh
perfor
param
sends
2Qua
inform
cell re
GUI V
Neigh
Unit:
Actua
3GAR
Defau
N3GARFCNSENDTYPE
GBFD- BSC
511110 supporting
Blind Search
Mean
ARFC
3G ce
cell re
servin
3G ce
cell re
3GNC
config
2Qua
neigh
perfor
param
sends
2Qua
inform
cell re
GUI V
Neigh
Unit:
Actua
3GAR
Defau
INTERRATINBSCHOEN
GBFD114301
GBFD114302
GBFD511103
Mean
from
param
incom
interfa
is DIS
meas
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
GSM and
WCDMA Load
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GBFD- Balancing
differe
511402 Based on Iur-g GUI V
Radio
Unit:
Resource
Actua
Reserved
Defau
Handover
Between
GSM/TDSCDMA
Based on Iur-g
INTERRATINBSCHOEN
GBFD114301
GBFD114302
GBFD511103
GBFD511402
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
GSM and
WCDMA Load
Balancing
Based on Iur-g
Radio
Resource
Reserved
Handover
Between
GSM/TDSCDMA
Based on Iur-g
Mean
from
param
incom
interfa
is DIS
meas
differe
GUI V
Unit:
Actua
Defau
INTERRATOUTBSCHOEN
GBFD114322
GBFD114301
GBFD114302
GBFD511103
GBFD511402
GSM/WCDMA
Load Based
Handover
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
GSM and
WCDMA Load
Balancing
Based on Iur-g
Radio
Resource
Reserved
Handover
Between
Mean
from
param
outgo
direct
GUI V
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GSM/TDSCDMA
Based on Iur-g
INTERRATOUTBSCHOEN
GBFD114322
GBFD114301
GBFD114302
GBFD511103
GBFD511402
GSM/WCDMA
Load Based
Handover
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
GSM and
WCDMA Load
Balancing
Based on Iur-g
Radio
Resource
Reserved
Handover
Between
GSM/TDSCDMA
Based on Iur-g
Mean
from
param
outgo
direct
GUI V
Unit:
Actua
Defau
HOOPTSEL
BSC6900 SET
GCELLHOUTRANFDD
GBFD110601
GBFD114301
GBFD114302
GBFD510501
HUAWEI I
Handover
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
HUAWEI II
Handover
Mean
wheth
prefer
for ha
to Pre
selec
cell fo
set to
prefer
as the
param
the B
neigh
target
neigh
the ca
small
for 2G
prefer
cell a
GUI V
Pre_2
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Pre_3
Pre_2
thresh
Unit:
Actua
Pre_3
Defau
Pre_2
thresh
HOOPTSEL
BSC6910 SET
GCELLHOUTRANFDD
GBFD110601
GBFD114301
GBFD114302
GBFD510501
HUAWEI I
Handover
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
HUAWEI II
Handover
Mean
wheth
prefer
for ha
to Pre
selec
cell fo
set to
prefer
as the
param
the B
neigh
target
neigh
the ca
small
for 2G
prefer
cell a
GUI V
Pre_2
Pre_3
Pre_2
thresh
Unit:
Actua
Pre_3
Defau
Pre_2
thresh
HOPRETH2G
BSC6900 SET
GCELLHOUTRANFDD
GBFD110601
GBFD114301
HUAWEI I
Handover
GSM/WCDMA
Interoperability
Mean
neigh
the ca
small
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GBFD114302
GBFD510501
GSM/TDSCDMA
Interoperability
HUAWEI II
Handover
prefer
cell a
Other
a neig
target
GUI V
Unit:
Actua
Defau
HOPRETH2G
BSC6910 SET
GCELLHOUTRANFDD
GBFD110601
GBFD114301
GBFD114302
GBFD510501
HUAWEI I
Handover
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
HUAWEI II
Handover
Mean
neigh
the ca
small
prefer
cell a
Other
a neig
target
GUI V
Unit:
Actua
Defau
BET3GHOEN
BSC6900 SET
GCELLHOUTRANFDD
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
better
param
hando
allowe
GUI V
Unit:
Actua
Defau
BET3GHOEN
BSC6910 SET
GCELLHOUTRANFDD
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
better
param
hando
allowe
GUI V
Unit:
Actua
Defau
HOSTAT3G
Parameter ID
NE
MML Command
Feature
ID
Feature Name
MOD G3GNCELL
114301 Interoperability to a b
neigh
Accor
better
condi
cell a
param
GUI V
Unit:
Actua
Defau
HOSTAT3G
HODURT3G
HODURT3G
Parameter ID
NE
MML Command
Feature
ID
Feature Name
hando
P out
P in t
GUI V
Unit:
Actua
Defau
HORSCPTH3G
BSC6900 SET
GCELLHOUTRANFDD
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
Level
hando
A bet
neigh
the m
cell is
param
G3GN
neigh
The d
param
detail
proto
0: CP
1: -11
dBm
2: -11
dBm
...
61: -5
62: -5
63: -5
GUI V
Unit:
Actua
Defau
HORSCPTH3G
BSC6910 SET
GCELLHOUTRANFDD
GBFD114301
GBFD114302
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
Mean
Level
hando
A bet
neigh
the m
cell is
param
Parameter ID
NE
MML Command
Feature
ID
Feature Name
G3GN
neigh
The d
param
detail
proto
0: CP
1: -11
dBm
2: -11
dBm
...
61: -5
62: -5
63: -5
GUI V
Unit:
Actua
Defau
RSCPOFF
GBFD110601
GBFD114301
GBFD114302
GBFD510501
HUAWEI I
Handover
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
HUAWEI II
Handover
Mean
Offse
cell. T
the va
level
decis
hando
netwo
The d
param
detail
proto
0: CP
1: -11
dBm
2: -11
dBm
...
61: -5
62: -5
63: -5
GUI V
Unit:
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Actua
Defau
RSCPOFF
GBFD110601
GBFD114301
GBFD114302
GBFD510501
HUAWEI I
Handover
GSM/WCDMA
Interoperability
GSM/TDSCDMA
Interoperability
HUAWEI II
Handover
Mean
Offse
cell. T
the va
level
decis
hando
netwo
The d
param
detail
proto
0: CP
1: -11
dBm
2: -11
dBm
...
61: -5
62: -5
63: -5
GUI V
Unit:
Actua
Defau
HOCipherSw
None
None
Mean
Whet
hando
the en
Chos
if this
Requ
This p
Requ
If this
target
algori
Encry
BSC
hando
Other
Parameter ID
NE
MML Command
Feature
ID
Feature Name
hando
the ta
If this
selec
algori
config
GUI V
Unit:
Actua
Defau
HOCipherSw
None
None
Mean
Whet
hando
the en
Chos
if this
Requ
This p
Requ
If this
target
algori
Encry
BSC
hando
Other
hando
the ta
If this
selec
algori
config
GUI V
Unit:
Actua
Defau
JudgeRNCCipherState
None
None
Mean
Whet
hando
encry
when
does
Algor
Parameter ID
NE
MML Command
Feature
ID
Feature Name
RAT
hando
If this
Hand
Old B
which
the B
encry
encry
target
Other
encry
If this
determ
encry
algori
instea
the or
GUI V
Unit:
Actua
Defau
JudgeRNCCipherState
None
None
Mean
Whet
hando
encry
when
does
Algor
RAT
hando
If this
Hand
Old B
which
the B
encry
encry
target
Other
encry
If this
determ
encry
algori
Parameter ID
NE
MML Command
Feature
ID
Feature Name
instea
the or
GUI V
Unit:
Actua
Defau
InterRatServiceLoadHoSwitch
BSC6900 SET
GBFD- GSM/WCDMA
GCELLHOINTERRATLDB 114322 Load Based
GBFD- Handover
511103 GSM and
GBFD- WCDMA Load
114321 Balancing
GBFD- Based on Iur-g
511104 GSM/WCDMA
Service Based
Handover
GSM and
WCDMA
Traffic
Steering
Based on Iur-g
Mean
Policy
hando
When
based
hando
When
or Dy
based
uplink
equal
or the
than o
"DlLd
are fil
betwe
cells.
GUI V
based
based
Servic
based
Unit:
Actua
Servic
based
CnSe
Defau
InterRatServiceLoadHoSwitch
BSC6910 SET
GBFD- GSM/WCDMA
GCELLHOINTERRATLDB 114322 Load Based
GBFD- Handover
511103 GSM and
GBFD- WCDMA Load
114321 Balancing
GBFD- Based on Iur-g
511104 GSM/WCDMA
Service Based
Mean
Policy
hando
When
based
hando
When
or Dy
based
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Handover
GSM and
WCDMA
Traffic
Steering
Based on Iur-g
uplink
equal
or the
than o
"DlLd
are fil
betwe
cells.
GUI V
based
based
Servic
based
Unit:
Actua
Servic
based
CnSe
Defau
G2GLoadAdjustCoeff
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
511103 on Iur-g
GSM and
WCDMA Load
Balancing
Based on Iur-g
Mean
the lo
load l
comp
GUI V
Unit:
Actua
Defau
G2GLoadAdjustCoeff
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
511103 on Iur-g
GSM and
WCDMA Load
Balancing
Based on Iur-g
Mean
the lo
load l
comp
GUI V
Unit:
Actua
Defau
G2G3GLdBlcDeltaThrd
Mean
Load
GSMperfor
based
follow
((Loa
GBFD114322
GBFD511103
GSM/WCDMA
Load Based
Handover
GSM and
WCDMA Load
Balancing
Based on Iur-g
Parameter ID
NE
MML Command
Feature
ID
Feature Name
- (Loa
"G2G
"G2G
param
config
GUI V
Unit:
Actua
Defau
G2G3GLdBlcDeltaThrd
GBFD114322
GBFD511103
GSM/WCDMA
Load Based
Handover
GSM and
WCDMA Load
Balancing
Based on Iur-g
Mean
Load
GSMperfor
based
follow
((Loa
- (Loa
"G2G
"G2G
param
config
GUI V
Unit:
Actua
Defau
LoadHoEnExt3G
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Mean
neigh
the B
local
relate
GUI V
Unit:
Actua
Defau
LoadHoEnExt3G
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Mean
neigh
the B
local
relate
GUI V
Unit:
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Actua
Defau
OutSysLoadHoEn
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
wheth
hando
assig
GUI V
Unit:
Actua
Defau
OutSysLoadHoEn
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
wheth
hando
assig
GUI V
Unit:
Actua
Defau
SYSFLOWLEV
Mean
Syste
syste
packe
load.
flux c
0-11:
Wher
11 ind
A load
syste
param
the m
impac
param
value
for th
[(Ave
Contr
Flow
Flow
100]/1
opera
Inner
GBFD114322
GBFD110601
GBFD510501
GSM/WCDMA
Load Based
Handover
HUAWEI I
Handover
HUAWEI II
Handover
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Thres
equal
Contr
level
from
2) Flo
start t
mess
Flow
disca
pagin
CPU
corre
to or g
thresh
increa
levels
value
GUI V
Unit:
Actua
Defau
SYSFLOWLEV
GBFD114322
GBFD110601
GBFD510501
GSM/WCDMA
Load Based
Handover
HUAWEI I
Handover
HUAWEI II
Handover
Mean
Syste
syste
packe
load.
flux c
0-11:
Wher
11 ind
A load
syste
param
the m
impac
param
value
for th
[(Ave
Contr
Flow
Flow
100]/1
opera
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Inner
Thres
equal
Contr
level
from
2) Flo
start t
mess
Flow
disca
pagin
CPU
corre
to or g
thresh
increa
levels
value
GUI V
Unit:
Actua
Defau
TRIGTHRES
GBFD114322
GBFD110601
GBFD510501
GSM/WCDMA
Load Based
Handover
HUAWEI I
Handover
HUAWEI II
Handover
Mean
starte
or eq
load-b
"LOA
this p
on loa
layer.
GUI V
Unit:
Actua
Defau
TRIGTHRES
GBFD114322
GBFD110601
GBFD510501
GSM/WCDMA
Load Based
Handover
HUAWEI I
Handover
HUAWEI II
Handover
Mean
starte
or eq
load-b
"LOA
this p
on loa
layer.
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GUI V
Unit:
Actua
Defau
InterRATLoadHoRSCPStart
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
of the
band.
for a
servin
the sa
hierar
contro
over a
increa
of pin
GUI V
Unit:
Actua
Defau
InterRATLoadHoRSCPStart
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
of the
band.
for a
servin
the sa
hierar
contro
over a
increa
of pin
GUI V
Unit:
Actua
Defau
IntRATLoadHORSCPThr
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
UMTS
to-UM
meas
to the
canno
UMTS
GUI V
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Unit:
Actua
Defau
IntRATLoadHORSCPThr
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
UMTS
to-UM
meas
to the
canno
UMTS
GUI V
Unit:
Actua
Defau
InterRATLoadHoEcNoStart
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
the in
If the
load-b
servin
the sa
hierar
contro
over a
increa
of pin
GUI V
Unit:
Actua
Defau
InterRATLoadHoEcNoStart
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
the in
If the
load-b
servin
the sa
hierar
contro
over a
increa
of pin
GUI V
Unit:
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Actua
Defau
IntRATLoadHOEcNoThr
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
cell d
hando
the M
of this
a load
GUI V
Unit:
Actua
Defau
IntRATLoadHOEcNoThr
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
cell d
hando
the M
of this
a load
GUI V
Unit:
Actua
Defau
IntRATLoadHoPeriod
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
interlevel.
for a
servin
the sa
hierar
contro
over a
increa
of pin
GUI V
Unit:
Actua
Defau
IntRATLoadHoPeriod
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
Mean
interlevel.
for a
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GSM/WCDMA servin
Load Based
the sa
Handover
hierar
contro
over a
increa
of pin
GUI V
Unit:
Actua
Defau
InterRATLoadHoRSCPStep
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
value
load-b
meets
hando
initiat
time.
hando
of cal
This a
load a
hando
GUI V
Unit:
Actua
Defau
InterRATLoadHoRSCPStep
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
value
load-b
meets
hando
initiat
time.
hando
of cal
This a
load a
hando
GUI V
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
InterRATLoadHoRSCPBandWidth
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
during
based
condi
calls i
reque
the hi
to con
hande
rapid
occur
GUI V
Unit:
Actua
Defau
InterRATLoadHoRSCPBandWidth
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
during
based
condi
calls i
reque
the hi
to con
hande
rapid
occur
GUI V
Unit:
Actua
Defau
InterRATLoadHoEcNoBandWidth
BSC6910 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
[EcNo
load-b
meets
hando
initiat
time.
hando
of cal
This a
load a
hando
GUI V
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Unit:
Actua
Defau
InterRATLoadHoEcNoBandWidth
BSC6900 SET
GBFD- Load Based
GCELLHOINTERRATLDB 511101 Handover
GBFD- Enhancement
114322 on Iur-g
GSM/WCDMA
Load Based
Handover
Mean
[EcNo
load-b
meets
hando
initiat
time.
hando
of cal
This a
load a
hando
GUI V
Unit:
Actua
Defau
SPTINTERRATINBSCPSHO
GBFD- PS Handover
119502
Mean
hando
cell d
is set
incom
servic
must
GUI V
Supp
Unit:
Actua
SUPP
Defau
Supp
SPTINTERRATINBSCPSHO
GBFD- PS Handover
119502
Mean
hando
cell d
is set
incom
servic
must
GUI V
Supp
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Unit:
Actua
SUPP
Defau
Supp
PSHOSUP
GBFD- PS Handover
119502
Mean
Hand
reduc
of the
GUI V
YES(
Unit:
Actua
Defau
PSHOSUP
GBFD- PS Handover
119502
Mean
Hand
reduc
of the
GUI V
YES(
Unit:
Actua
Defau
SPTINTERRATOUTBSCPSHO
GBFD- PS Handover
119502
Mean
hando
cell d
is set
comin
is allo
suppo
GUI V
Supp
Unit:
Actua
SUPP
Defau
Supp
SPTINTERRATOUTBSCPSHO
GBFD- PS Handover
119502
Mean
hando
cell d
is set
Parameter ID
NE
MML Command
Feature
ID
Feature Name
comin
is allo
suppo
GUI V
Supp
Unit:
Actua
SUPP
Defau
Supp
NACCSPT
GBFD- Network
116301 Assisted Cell
Change
(NACC)
Mean
assist
is use
or NC
to not
about
when
transm
servic
target
interr
resele
GUI V
Unit:
Actua
Defau
NACCSPT
GBFD- Network
116301 Assisted Cell
Change
(NACC)
Mean
assist
is use
or NC
to not
about
when
transm
servic
target
interr
resele
GUI V
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
NC2SPT
GBFD511310
GBFD511307
GBFD116201
Multi
Technology
Neighbour Cell
Based
Handover
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
Mean
contro
sends
conta
cell a
netwo
MS.
GUI V
Unit:
Actua
Defau
NC2SPT
GBFD511310
GBFD511307
GBFD116201
Multi
Technology
Neighbour Cell
Based
Handover
eNC2
Between GSM
and LTE
NetworkControlled Cell
Reselection
(NC2)
Mean
contro
sends
conta
cell a
netwo
MS.
GUI V
Unit:
Actua
Defau
PFCSUP
GBFD511310
GBFD119905
GBFD119906
GBFD119901
Multi
Technology
Neighbour Cell
Based
Handover
PoC QoS
Conversational
QoS
Streaming
QoS(GBR)
Mean
Whet
Flow
impro
packe
In SG
proce
follow
All the
in the
"PFC
The S
The "
GCEL
to YE
param
GCEL
to ON
GUI V
Parameter ID
NE
MML Command
Feature
ID
Feature Name
YES(
Unit:
Actua
Defau
PFCSUP
GBFD511310
GBFD119905
GBFD119906
GBFD119901
Multi
Technology
Neighbour Cell
Based
Handover
PoC QoS
Conversational
QoS
Streaming
QoS(GBR)
Mean
Whet
Flow
impro
packe
In SG
proce
follow
All the
in the
"PFC
The S
The "
GCEL
to YE
param
GCEL
to ON
GUI V
YES(
Unit:
Actua
Defau
UTRANPRI
BSC6900 SET
GCELLPRIEUTRANSYS
GBFD- Cell
511301 Reselection
Between GSM
and LTE
Mean
Value
value
GUI V
Unit:
Actua
Defau
UTRANPRI
BSC6910 SET
GCELLPRIEUTRANSYS
GBFD- Cell
511301 Reselection
Between GSM
and LTE
Mean
Value
value
GUI V
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
EUTRANPRI
BSC6900 SET
GCELLPRIEUTRANSYS
GBFD511301
GBFD511312
Cell
Reselection
Between GSM
and LTE
Fast LTE
Reselection at
2G CS Call
Release
Mean
Value
value
GUI V
Unit:
Actua
Defau
EUTRANPRI
BSC6910 SET
GCELLPRIEUTRANSYS
GBFD511301
GBFD511312
Cell
Reselection
Between GSM
and LTE
Fast LTE
Reselection at
2G CS Call
Release
Mean
Value
value
GUI V
Unit:
Actua
Defau
FddRptThreshold2Ecno
BSC6900 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
FddRptThreshold2Ecno
BSC6910 SET
GCELLCCUTRANSYS
FddRptThreshold2Rscp
BSC6900 SET
GCELLCCUTRANSYS
Parameter ID
NE
MML Command
Feature
ID
Feature Name
dBm
2: -11
dBm
...
61: -5
62: -5
63: -5
GUI V
Unit:
Actua
Defau
FddRptThreshold2Rscp
BSC6910 SET
GCELLCCUTRANSYS
ECSC
Mean
contro
Parameter ID
NE
MML Command
Feature
ID
Feature Name
GBFD114302
GBFD111101
GSM/TDSCDMA
Interoperability
System
Information
Sending
INPUT3GARFCNENTYPE
GBFD- BSC
511110 supporting
Mean
contro
wheth
classm
imme
additi
netwo
additi
conta
inform
inform
suppo
future
inform
suppo
hando
bands
MS.
GUI V
Unit:
Actua
Defau
Mean
ARFC
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Blind Search
GUI V
Unit:
Actua
Defau
INPUT3GARFCNENTYPE
GBFD- BSC
511110 supporting
Blind Search
Mean
ARFC
GUI V
Unit:
Actua
Defau
ARFCN1
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN1
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN8
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN8
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
Parameter ID
NE
MML Command
Feature
ID
Feature Name
ARFCN9
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN9
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN16
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN16
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN1
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN1
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Parameter ID
NE
MML Command
Feature
ID
Feature Name
Unit:
Actua
Defau
ARFCN8
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN8
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN9
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN9
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
ARFCN16
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
Parameter ID
ARFCN16
12
NE
MML Command
Feature
ID
Feature Name
GBFD- BSC
511110 supporting
Blind Search
Mean
param
is inva
GUI V
Unit:
Actua
Defau
Counters
Counter Name
Counter Descrip
1278699497 BSCRPT.INTERRAN.OUTCELL.HO.FAIL.T8.EXP
ZH952C:Succes
Reconnections
Old Channels u
Outgoing Inter-R
Inter-Cell Hando
Failure per BSC
Time Out)
1278699498 BSCRPT.INTERRAN.OUTCELL.HO.FAIL.RECONN.SUCC
ZCH952D:Succ
Reconnections
Old Channels u
Outgoing Inter-R
Inter-Cell Hando
Failure per BSC
1278699497 BSCRPT.INTERRAN.OUTCELL.HO.FAIL.T8.EXP
ZH952C:Succes
Reconnections
Old Channels u
Outgoing Inter-R
Inter-Cell Hando
Failure per BSC
Time Out)
1278699498 BSCRPT.INTERRAN.OUTCELL.HO.FAIL.RECONN.SUCC
ZCH952D:Succ
Reconnections
Old Channels u
Counter ID
Counter Name
Counter Descrip
Outgoing Inter-R
Inter-Cell Hando
Failure per BSC
1278082417 CELL.INTERRAN.INCELL.HO.REQ.SD
H3600:Incoming
Inter-RAT InterHandover Requ
(SDCCH)
1278082418 CELL.INTERRAN.INCELL.HO.REQ.TCH
H3609:Incoming
Inter-RAT InterHandover Requ
(TCH)
1278082419 CELL.INTERRAN.INCELL.HO.REQ.ACK.SD
H3610:Incoming
Inter-RAT InterHandover
Responses (SD
1278082420 CELL.INTERRAN.INCELL.HO.REQ.ACK.TCHF
H3617:Incoming
Inter-RAT InterHandover
Responses (TC
1278082421 CELL.INTERRAN.INCELL.HO.REQ.ACK.TCHH
H3618:Incoming
Inter-RAT InterHandover
Responses (TC
1278082422 CELL.INTERRAN.INCELL.HO.FAIL.SD
H3620:Failed
Incoming Inter-R
Inter-Cell Hando
(SDCCH)
1278082423 CELL.INTERRAN.INCELL.HO.FAIL.TCHF
H3627:Failed
Incoming Inter-R
Inter-Cell Hando
(TCHF)
1278082424 CELL.INTERRAN.INCELL.HO.FAIL.TCHH
H3628:Failed
Counter ID
Counter Name
Counter Descrip
Incoming Inter-R
Inter-Cell Hando
(TCHH)
1278082425 CELL.INTERRAN.INCELL.HO.FAIL.INVALID.CONTENTS
H362J:Failed
Incoming Inter-R
Inter-Cell Hando
(Invalid Messag
1278082426 CELL.INTERRAN.INCELL.HO.FAIL.CONG.SD
H3620A:Failed
Incoming Inter-R
Inter-Cell Hando
(No Channel
Available) (SDC
1278082427 CELL.INTERRAN.INCELL.HO.FAIL.CONG.TCH
H3629A:Failed
Incoming Inter-R
Inter-Cell Hando
(No Channel
Available) (TCH
1278082428 CELL.INTERRAN.INCELL.HO.FAIL.NO.CIC
H362E:Failed
Incoming Inter-R
Inter-Cell Hando
(CIC Unavailabl
1278082429 CELL.INTERRAN.INCELL.HO.FAIL.CIC.ALLOC
H362F:Failed
Incoming Inter-R
Inter-Cell Hando
(CIC Allocated)
1278082430 CELL.INTERRAN.INCELL.HO.FAIL.APPLY.TRSL.FAIL
H362B:Failed
Incoming Inter-R
Inter-Cell Hando
(Terrestrial Res
Request Failed)
1278082431 CELL.INTERRAN.INCELL.HO.FAIL.MSC.CLR.CMD
H362H:Failed
Incoming Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
Counter ID
Counter Name
Counter Descrip
1278082432 CELL.INTERRAN.INCELL.HO.FAIL.EXP.SD
H3620C:Failed
Incoming Inter-R
Inter-Cell Hando
(Timer Expired)
(SDCCH)
1278082433 CELL.INTERRAN.INCELL.HO.FAIL.EXP.TCH.SIG
H3629Cb:Failed
Incoming Inter-R
Inter-Cell Hando
(Timer Expired)
(TCH) (Signalin
Channel)
1278082434 CELL.INTERRAN.INCELL.HO.FAIL.EXP.TCH.TRAF.CH
H3629Ca:Failed
Incoming Inter-R
Inter-Cell Hando
(Timer Expired)
(TCH) (Traffic
Channel)
1278082435 CELL.INTERRAN.INCELL.HO.REQ
CH360:Incomin
Inter-RAT InterHandover Requ
1278082436 CELL.INTERRAN.INCELL.HO.SUCC
CH363:Success
Incoming Inter-R
Inter-Cell Hando
1278082437 CELL.INTERRAN.INCELL.HO.SUCC.RATE
TH363:Success
of Incoming Inte
RAT Inter-Cell
Handover
1278082438 CELL.INTERRAN.INCELL.HO.REQ.ACK
CH361:Incomin
Inter-RAT InterHandover
Responses
1278082439 CELL.INTERRAN.INCELL.HO.FAIL
H362:Failed
Incoming Inter-R
Inter-Cell Hando
Counter ID
Counter Name
Counter Descrip
1278082440 CELL.INTERRAN.INCELL.HO.FAIL.EXP
H362C:Failed
Incoming Inter-R
Inter-Cell Hando
(Timer Expired)
1278082441 CELL.INTERRAN.INCELL.HO.FAIL.NO.SPEECH.VER
H362L:Failed
Incoming Inter-R
Inter-Cell Hando
(Requested Spe
Version Unavail
1278082417 CELL.INTERRAN.INCELL.HO.REQ.SD
H3600:Incoming
Inter-RAT InterHandover Requ
(SDCCH)
1278082418 CELL.INTERRAN.INCELL.HO.REQ.TCH
H3609:Incoming
Inter-RAT InterHandover Requ
(TCH)
1278082419 CELL.INTERRAN.INCELL.HO.REQ.ACK.SD
H3610:Incoming
Inter-RAT InterHandover
Responses (SD
1278082420 CELL.INTERRAN.INCELL.HO.REQ.ACK.TCHF
H3617:Incoming
Inter-RAT InterHandover
Responses (TC
1278082421 CELL.INTERRAN.INCELL.HO.REQ.ACK.TCHH
H3618:Incoming
Inter-RAT InterHandover
Responses (TC
1278082422 CELL.INTERRAN.INCELL.HO.FAIL.SD
H3620:Failed
Incoming Inter-R
Counter ID
Counter Name
Counter Descrip
Inter-Cell Hando
(SDCCH)
1278082423 CELL.INTERRAN.INCELL.HO.FAIL.TCHF
H3627:Failed
Incoming Inter-R
Inter-Cell Hando
(TCHF)
1278082424 CELL.INTERRAN.INCELL.HO.FAIL.TCHH
H3628:Failed
Incoming Inter-R
Inter-Cell Hando
(TCHH)
1278082425 CELL.INTERRAN.INCELL.HO.FAIL.INVALID.CONTENTS
H362J:Failed
Incoming Inter-R
Inter-Cell Hando
(Invalid Messag
1278082426 CELL.INTERRAN.INCELL.HO.FAIL.CONG.SD
H3620A:Failed
Incoming Inter-R
Inter-Cell Hando
(No Channel
Available) (SDC
1278082427 CELL.INTERRAN.INCELL.HO.FAIL.CONG.TCH
H3629A:Failed
Incoming Inter-R
Inter-Cell Hando
(No Channel
Available) (TCH
1278082428 CELL.INTERRAN.INCELL.HO.FAIL.NO.CIC
H362E:Failed
Incoming Inter-R
Inter-Cell Hando
(CIC Unavailabl
1278082429 CELL.INTERRAN.INCELL.HO.FAIL.CIC.ALLOC
H362F:Failed
Incoming Inter-R
Inter-Cell Hando
(CIC Allocated)
1278082430 CELL.INTERRAN.INCELL.HO.FAIL.APPLY.TRSL.FAIL
H362B:Failed
Counter ID
Counter Name
Counter Descrip
Incoming Inter-R
Inter-Cell Hando
(Terrestrial Res
Request Failed)
1278082431 CELL.INTERRAN.INCELL.HO.FAIL.MSC.CLR.CMD
H362H:Failed
Incoming Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
1278082432 CELL.INTERRAN.INCELL.HO.FAIL.EXP.SD
H3620C:Failed
Incoming Inter-R
Inter-Cell Hando
(Timer Expired)
(SDCCH)
1278082433 CELL.INTERRAN.INCELL.HO.FAIL.EXP.TCH.SIG
H3629Cb:Failed
Incoming Inter-R
Inter-Cell Hando
(Timer Expired)
(TCH) (Signalin
Channel)
1278082434 CELL.INTERRAN.INCELL.HO.FAIL.EXP.TCH.TRAF.CH
H3629Ca:Failed
Incoming Inter-R
Inter-Cell Hando
(Timer Expired)
(TCH) (Traffic
Channel)
1278082435 CELL.INTERRAN.INCELL.HO.REQ
CH360:Incomin
Inter-RAT InterHandover Requ
1278082436 CELL.INTERRAN.INCELL.HO.SUCC
CH363:Success
Incoming Inter-R
Inter-Cell Hando
1278082437 CELL.INTERRAN.INCELL.HO.SUCC.RATE
TH363:Success
of Incoming Inte
RAT Inter-Cell
Handover
Counter ID
Counter Name
Counter Descrip
1278082438 CELL.INTERRAN.INCELL.HO.REQ.ACK
CH361:Incomin
Inter-RAT InterHandover
Responses
1278082439 CELL.INTERRAN.INCELL.HO.FAIL
H362:Failed
Incoming Inter-R
Inter-Cell Hando
1278082440 CELL.INTERRAN.INCELL.HO.FAIL.EXP
H362C:Failed
Incoming Inter-R
Inter-Cell Hando
(Timer Expired)
1278082441 CELL.INTERRAN.INCELL.HO.FAIL.NO.SPEECH.VER
H362L:Failed
Incoming Inter-R
Inter-Cell Hando
(Requested Spe
Version Unavail
1278083417 CELL.INTERRAN.OUTCELL.HO.REQ.NOT.INCLUDE.DR.SD
H3500:Outgoing
Inter-RAT InterHandover Requ
(SDCCH) (Exclu
Directed Retry)
1278083418 CELL.INTERRAN.OUTCELL.HO.REQ.TCHF
H3507:Outgoing
Inter-RAT InterHandover Requ
(TCHF)
1278083419 CELL.INTERRAN.OUTCELL.HO.REQ.TCHH
H3508:Outgoing
Inter-RAT InterHandover Requ
(TCHH)
1278083420 CELL.INTERRAN.OUTCELL.HO.CMD.NOT.INCLUDE.DR.SD
H3510:Outgoing
Inter-RAT InterHandover
Counter ID
Counter Name
Counter Descrip
Commands
(SDCCH) (Exclu
Directed Retry)
1278083421 CELL.INTERRAN.OUTCELL.HO.CMD.TCHF
H3517:Outgoing
Inter-RAT InterHandover
Commands (TC
1278083422 CELL.INTERRAN.OUTCELL.HO.CMD.TCHH
H3518:Outgoing
Inter-RAT InterHandover
Commands (TC
1278083423 CELL.INTERRAN.OUTCELL.HO.FAIL.NOT.INCLUDE.DR.SD
H3520:Failed
Outgoing Inter-R
Inter-Cell Hando
(SDCCH) (Exclu
Directed Retry)
1278083424 CELL.INTERRAN.OUTCELL.HO.FAIL.TCHF
H3527:Failed
Outgoing Inter-R
Inter-Cell Hando
(TCHF)
1278083425 CELL.INTERRAN.OUTCELL.HO.FAIL.TCHH
H3528:Failed
Outgoing Inter-R
Inter-Cell Hando
(TCHH)
1278083426 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.ABNORM.REL.UNS
H352Da:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Abn
Release,
Unspecified)
1278083427 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.ABNORM.REL.CHN
H352Db:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Abn
Counter ID
Counter Name
Counter Descrip
Release, Chann
Unacceptable)
1278083428 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.ABNORM.REL.T.E
H352Dc:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Abn
Release, Timer
Expired)
1278083429 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.ABNORM.REL.NO.ACT
H352Dd:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Abn
Release, No Ac
on the Radio Pa
1278083430 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.PREEMPT.RLS
H352De:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels)
(Preemptive
Release)
1278083431 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.HO.TA
H352Df:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Han
Failed, Timing
Advance out of
Range)
1278083432 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.NO.CH.MODE
H352Dg:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Cha
Mode Unavailab
1278083433 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.FREQ
H352Dh:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels)
Counter ID
Counter Name
Counter Descrip
(Frequency
Unavailable)
1278083434 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.CALL.CLR
H352Di:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Call
Already Cleared
1278083435 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.SEMANT
H352Dj:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels)
(Semantically
Incorrect Messa
1278083436 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.INV.MAN
H352Dk:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Inva
Mandatory
Information)
1278083437 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.MSG.TYPE.NEXISTENT
H352Dl:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Mes
Type Non-existe
Not Implemente
H352Dn:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels)
(Conditional IE
Counter ID
Counter Name
Counter Descrip
1278083440 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.NO.CA
H352Do:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (No C
Allocation Availa
1278083441 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.PROTOCL
H352Dp:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Prot
Error Unspecifie
1278083442 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.OTHER
H352Dq:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Othe
Causes)
1278083443 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.OM.INTERVENTION
H352Ka:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (OM
Intervention)
1278083444 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.EQUIP.FAIL
H352Kb:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
(Equipment Fail
1278083445 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.NO.RADIO.RES
H352Kc:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (No R
Resource Availa
1278083446 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.REQ.NO.TER.RES
H352Kd:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
(Requested
Counter ID
Counter Name
Counter Descrip
Terrestrial Reso
Unavailable)
1278083447 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.BSS.NOT.EQUIP
H352Ke:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (BSS
Equipped)
1278083448 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.INVAILD.CELL
H352Kf:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Inval
Cell)
1278083449 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.REQ.TRANSC.UNAIVL
H352Kg:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
(Requested
Transcoding/Ra
Adaption
Unavailable)
1278083450 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.CIR.POOL.MISMATCH
H352Kh:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Circu
Pool Mismatch)
1278083451 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.REQ.NO.SV
H352Ki:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
(Requested Spe
Version Unavail
1278083452 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.CIPH.ALG.NOT.SUPT
H352Kj:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Ciph
Algorithm not
Counter ID
Counter Name
Counter Descrip
Supported)
1278083453 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.TER.CIR.ALRDY.ALLOC
H352Kk:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Terre
circuit already
allocated)
1278083454 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.INVAILD.MSG
H352Kl:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Inval
Message)
1278083455 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.PROTOCOL.ERR
H352Km:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Proto
Error between B
and MSC)
1278083456 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.OTHER
H352Kn:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Othe
Causes)
1278083457 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.RADIO.INTF.MSG.FAIL
H352Ha:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC) (
Interface Messa
Failure)
1278083458 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.RADIO.INTF.FAIL
H352Hb:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC) (
Interface Failure
1278083459 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.OM.INTERVENTION
H352Hc:Failed
Counter ID
Counter Name
Counter Descrip
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC) (
Intervention)
1278083460 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.EQUIP.FAIL
H352Hd:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
(Equipment Fail
1278083461 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.PREEMPTION
H352He:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
(Preemption)
1278083462 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.INVALID.MSG
H352Hf:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
(Invalid Messag
1278083463 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.PROTOCOL.ERR
H352Hg:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
(Protocol Error
between BSS a
MSC)
1278083464 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.OTHER
H352Hh:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC) (
Causes)
1278083465 CELL.INTERRAN.OUTCELL.HO.FAIL.A.INTERF.FAIL
H352G:Failed
Outgoing Inter-R
Inter-Cell Hando
(A Interface Fail
Counter ID
Counter Name
Counter Descrip
1278083466 CELL.INTERRAN.OUTCELL.HO.FAIL.T7.EXP
H352L:Failed
Outgoing Inter-R
Inter-Cell Hando
(T7 Expired)
1278083467 CELL.INTERRAN.OUTCELL.HO.FAIL.T8.EXP
H352C:Failed
Outgoing Inter-R
Inter-Cell Hando
(T8 Expired)
1278083468 CELL.INTERRAN.OUTCELL.HO.REQ
CH350:Outgoin
Inter-RAT InterHandover Requ
1278083469 CELL.INTERRAN.OUTCELL.HO.SUCC
CH353:Success
Outgoing Inter-R
Inter-Cell Hando
1278083470 CELL.INTERRAN.OUTCELL.HO.SUCC.RATE
TH353:Success
of Outgoing Inte
RAT Inter-Cell
Handover
1278083471 CELL.INTERRAN.OUTCELL.HO.CMD
CH351:Outgoin
Inter-RAT InterHandover
Commands
1278083472 CELL.INTERRAN.OUTCELL.HO.FAIL
CH352:Failed
Outgoing Inter-R
Inter-Cell Hando
1278083473 CELL.INTERRAN.OUTCELL.HO.FAIL.RECONN.SUCC
CH352D:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Counter ID
Counter Name
Counter Descrip
Channels)
1278083474 CELL.INTERRAN.OUTCELL.HO.FAIL.REQ.REJ
CH352K:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
1278083475 CELL.INTERRAN.OUTCELL.HO.FAIL.MSC.CLR
CH352H:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
1278083486 CELL.INTERRAN.OUTCELL.HO.REQ.LOAD.BASED.HO
H350G:Outgoin
Inter-RAT InterHandover
Requests(load b
handover)
1278083487 CELL.INTERRAN.OUTCELL.HO.CMD.LOAD.BASED.HO
H351G:Outgoin
Inter-RAT InterHandover
Commands(load
based handover
1278083488 CELL.INTERRAN.OUTCELL.HO.FAIL.TARGETCELL.TRAFLOAD.HIGHER
H352N:Number
Failed Outgoing
Inter-RAT InterHandovers (Tar
Cell Traffic Load
Higher)
1278083489 CELL.INTERRAN.OUTCELL.HO.REQ.SERVICE.BASED.HO
H350M:Outgoin
Inter-RAT InterHandover
Requests(servic
based handover
1278083490 CELL.INTERRAN.OUTCELL.HO.CMD.SERVICE.BASED.HO
H351M:Outgoin
Inter-RAT InterHandover
Commands(ser
based handover
1278083491 CELL.INTERRAN.OUTCELL.HO.FAIL.SERVICE.BASED.HO
H352M:Failed
Outgoing Inter-R
Inter-Cell
Counter ID
Counter Name
Counter Descrip
Handovers(serv
based handover
1278083492 CELL.INTERRAN.OUTCELL.HO.REQ.DR.SD
H3500A:Outgoin
Inter-RAT InterHandover Requ
(SDCCH) (Direc
Retry)
1278083493 CELL.INTERRAN.OUTCELL.HO.CMD.DR.SD
H3510A:Outgoin
Inter-RAT InterHandover
Commands
(SDCCH) (Direc
Retry)
1278083494 CELL.INTERRAN.OUTCELL.HO.FAIL.DR.SD
H3520A:Failed
Outgoing Inter-R
Inter-Cell Hando
(SDCCH) (Direc
Retry)
1282433311 CELL.INTERRAN.OUTCELL.HO.REQ.GW.DIFF.MS
H0308A:Numbe
Handover Requ
(MSs Enabled w
GSM/WCDMA
Interoperability)
1282433312 CELL.INTERRAN.OUTCELL.HO.FAIL.GW.DIFF.MS
H0328A:Numbe
Handover Failur
(MSs Enabled w
GSM/WCDMA
Interoperability)
1278083417 CELL.INTERRAN.OUTCELL.HO.REQ.NOT.INCLUDE.DR.SD
H3500:Outgoing
Inter-RAT InterHandover Requ
(SDCCH) (Exclu
Directed Retry)
1278083418 CELL.INTERRAN.OUTCELL.HO.REQ.TCHF
H3507:Outgoing
Inter-RAT InterHandover Requ
(TCHF)
1278083419 CELL.INTERRAN.OUTCELL.HO.REQ.TCHH
H3508:Outgoing
Inter-RAT Inter-
Counter ID
Counter Name
Counter Descrip
Handover Requ
(TCHH)
1278083420 CELL.INTERRAN.OUTCELL.HO.CMD.NOT.INCLUDE.DR.SD
H3510:Outgoing
Inter-RAT InterHandover
Commands
(SDCCH) (Exclu
Directed Retry)
1278083421 CELL.INTERRAN.OUTCELL.HO.CMD.TCHF
H3517:Outgoing
Inter-RAT InterHandover
Commands (TC
1278083422 CELL.INTERRAN.OUTCELL.HO.CMD.TCHH
H3518:Outgoing
Inter-RAT InterHandover
Commands (TC
1278083423 CELL.INTERRAN.OUTCELL.HO.FAIL.NOT.INCLUDE.DR.SD
H3520:Failed
Outgoing Inter-R
Inter-Cell Hando
(SDCCH) (Exclu
Directed Retry)
1278083424 CELL.INTERRAN.OUTCELL.HO.FAIL.TCHF
H3527:Failed
Outgoing Inter-R
Inter-Cell Hando
(TCHF)
1278083425 CELL.INTERRAN.OUTCELL.HO.FAIL.TCHH
H3528:Failed
Outgoing Inter-R
Inter-Cell Hando
(TCHH)
1278083426 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.ABNORM.REL.UNS
H352Da:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Abn
Counter ID
Counter Name
Counter Descrip
Release,
Unspecified)
1278083427 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.ABNORM.REL.CHN
H352Db:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Abn
Release, Chann
Unacceptable)
1278083428 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.ABNORM.REL.T.E
H352Dc:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Abn
Release, Timer
Expired)
1278083429 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.ABNORM.REL.NO.ACT
H352Dd:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Abn
Release, No Ac
on the Radio Pa
1278083430 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.PREEMPT.RLS
H352De:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels)
(Preemptive
Release)
1278083431 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.HO.TA
H352Df:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Han
Failed, Timing
Advance out of
Range)
1278083432 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.NO.CH.MODE
H352Dg:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Counter ID
Counter Name
Counter Descrip
Channels) (Cha
Mode Unavailab
1278083433 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.FREQ
H352Dh:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels)
(Frequency
Unavailable)
1278083434 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.CALL.CLR
H352Di:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Call
Already Cleared
1278083435 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.SEMANT
H352Dj:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels)
(Semantically
Incorrect Messa
1278083436 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.INV.MAN
H352Dk:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Inva
Mandatory
Information)
1278083437 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.MSG.TYPE.NEXISTENT
H352Dl:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Mes
Type Non-existe
Not Implemente
Counter ID
Counter Name
Counter Descrip
with Protocol St
1278083439 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.CONDITION.IE.ERR
H352Dn:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels)
(Conditional IE
1278083440 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.NO.CA
H352Do:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (No C
Allocation Availa
1278083441 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.PROTOCL
H352Dp:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Prot
Error Unspecifie
1278083442 CELL.INTERRAN.OUTCELL.HO.FAIL.MS.RPT.OTHER
H352Dq:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels) (Othe
Causes)
1278083443 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.OM.INTERVENTION
H352Ka:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (OM
Intervention)
1278083444 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.EQUIP.FAIL
H352Kb:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
(Equipment Fail
1278083445 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.NO.RADIO.RES
H352Kc:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Counter ID
Counter Name
Counter Descrip
Rejected) (No R
Resource Availa
1278083446 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.REQ.NO.TER.RES
H352Kd:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
(Requested
Terrestrial Reso
Unavailable)
1278083447 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.BSS.NOT.EQUIP
H352Ke:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (BSS
Equipped)
1278083448 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.INVAILD.CELL
H352Kf:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Inval
Cell)
1278083449 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.REQ.TRANSC.UNAIVL
H352Kg:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
(Requested
Transcoding/Ra
Adaption
Unavailable)
1278083450 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.CIR.POOL.MISMATCH
H352Kh:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Circu
Pool Mismatch)
1278083451 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.REQ.NO.SV
H352Ki:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
Counter ID
Counter Name
Counter Descrip
(Requested Spe
Version Unavail
1278083452 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.CIPH.ALG.NOT.SUPT
H352Kj:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Ciph
Algorithm not
Supported)
1278083453 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.TER.CIR.ALRDY.ALLOC
H352Kk:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Terre
circuit already
allocated)
1278083454 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.INVAILD.MSG
H352Kl:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Inval
Message)
1278083455 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.PROTOCOL.ERR
H352Km:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Proto
Error between B
and MSC)
1278083456 CELL.INTERRAN.OUTCELL.HO.FAIL.HO.REJ.OTHER
H352Kn:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected) (Othe
Causes)
1278083457 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.RADIO.INTF.MSG.FAIL
H352Ha:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC) (
Interface Messa
Failure)
Counter ID
Counter Name
Counter Descrip
1278083458 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.RADIO.INTF.FAIL
H352Hb:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC) (
Interface Failure
1278083459 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.OM.INTERVENTION
H352Hc:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC) (
Intervention)
1278083460 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.EQUIP.FAIL
H352Hd:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
(Equipment Fail
1278083461 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.PREEMPTION
H352He:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
(Preemption)
1278083462 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.INVALID.MSG
H352Hf:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
(Invalid Messag
1278083463 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.PROTOCOL.ERR
H352Hg:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
(Protocol Error
between BSS a
MSC)
1278083464 CELL.INTERRAN.OUTCELL.HO.FAIL.CLR.CMD.OTHER
H352Hh:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Counter ID
Counter Name
Counter Descrip
Sent By MSC) (
Causes)
1278083465 CELL.INTERRAN.OUTCELL.HO.FAIL.A.INTERF.FAIL
H352G:Failed
Outgoing Inter-R
Inter-Cell Hando
(A Interface Fail
1278083466 CELL.INTERRAN.OUTCELL.HO.FAIL.T7.EXP
H352L:Failed
Outgoing Inter-R
Inter-Cell Hando
(T7 Expired)
1278083467 CELL.INTERRAN.OUTCELL.HO.FAIL.T8.EXP
H352C:Failed
Outgoing Inter-R
Inter-Cell Hando
(T8 Expired)
1278083468 CELL.INTERRAN.OUTCELL.HO.REQ
CH350:Outgoin
Inter-RAT InterHandover Requ
1278083469 CELL.INTERRAN.OUTCELL.HO.SUCC
CH353:Success
Outgoing Inter-R
Inter-Cell Hando
1278083470 CELL.INTERRAN.OUTCELL.HO.SUCC.RATE
TH353:Success
of Outgoing Inte
RAT Inter-Cell
Handover
1278083471 CELL.INTERRAN.OUTCELL.HO.CMD
CH351:Outgoin
Inter-RAT InterHandover
Commands
1278083472 CELL.INTERRAN.OUTCELL.HO.FAIL
CH352:Failed
Outgoing Inter-R
Counter ID
Counter Name
Counter Descrip
Inter-Cell Hando
1278083473 CELL.INTERRAN.OUTCELL.HO.FAIL.RECONN.SUCC
CH352D:Failed
Outgoing Inter-R
Inter-Cell Hando
(Reconnection t
Channels)
1278083474 CELL.INTERRAN.OUTCELL.HO.FAIL.REQ.REJ
CH352K:Failed
Outgoing Inter-R
Inter-Cell Hando
(Handover Requ
Rejected)
1278083475 CELL.INTERRAN.OUTCELL.HO.FAIL.MSC.CLR
CH352H:Failed
Outgoing Inter-R
Inter-Cell Hando
(Clear Comman
Sent By MSC)
1278083486 CELL.INTERRAN.OUTCELL.HO.REQ.LOAD.BASED.HO
H350G:Outgoin
Inter-RAT InterHandover
Requests(load b
handover)
1278083487 CELL.INTERRAN.OUTCELL.HO.CMD.LOAD.BASED.HO
H351G:Outgoin
Inter-RAT InterHandover
Commands(load
based handover
1278083488 CELL.INTERRAN.OUTCELL.HO.FAIL.TARGETCELL.TRAFLOAD.HIGHER
H352N:Number
Failed Outgoing
Inter-RAT InterHandovers (Tar
Cell Traffic Load
Higher)
1278083489 CELL.INTERRAN.OUTCELL.HO.REQ.SERVICE.BASED.HO
H350M:Outgoin
Inter-RAT InterHandover
Requests(servic
based handover
1278083490 CELL.INTERRAN.OUTCELL.HO.CMD.SERVICE.BASED.HO
H351M:Outgoin
Counter ID
Counter Name
Counter Descrip
Inter-RAT InterHandover
Commands(ser
based handover
1278083491 CELL.INTERRAN.OUTCELL.HO.FAIL.SERVICE.BASED.HO
H352M:Failed
Outgoing Inter-R
Inter-Cell
Handovers(serv
based handover
1278083492 CELL.INTERRAN.OUTCELL.HO.REQ.DR.SD
H3500A:Outgoin
Inter-RAT InterHandover Requ
(SDCCH) (Direc
Retry)
1278083493 CELL.INTERRAN.OUTCELL.HO.CMD.DR.SD
H3510A:Outgoin
Inter-RAT InterHandover
Commands
(SDCCH) (Direc
Retry)
1278083494 CELL.INTERRAN.OUTCELL.HO.FAIL.DR.SD
H3520A:Failed
Outgoing Inter-R
Inter-Cell Hando
(SDCCH) (Direc
Retry)
1282433311 CELL.INTERRAN.OUTCELL.HO.REQ.GW.DIFF.MS
H0308A:Numbe
Handover Requ
(MSs Enabled w
GSM/WCDMA
Interoperability)
1282433312 CELL.INTERRAN.OUTCELL.HO.FAIL.GW.DIFF.MS
H0328A:Numbe
Handover Failur
(MSs Enabled w
GSM/WCDMA
Interoperability)
1279172426 NC.CELL.RESELECT.ATMPT
H9010:Number
Network-Contro
Cell Reselection
Attempts
Counter ID
Counter Name
Counter Descrip
1279172427 NC.CELL.URG.RESELECT.ATMPT
H9011:Number
Network-Contro
Cell Reselection
Attempts Due to
Downlink Qualit
1279172428 NC.CELL.LOAD.RESELECT.ATMPT
H9012:Number
Network-Contro
Cell Reselection
Attempts due to
Traffic Load
1279172429 NC.CELL.GENERAL.RESELECT.ATMPT
H9013:Number
Network-Contro
Cell Reselection
Attempts for Be
Cell
Counter ID
Counter Name
Counter Descrip
1279172430 NC.CELL.RESELECT.FAIL.ATMPT
H9014:Number
Failed NetworkControlled Cell
Reselections
1279172433 NC.CELL.INTERRAN.RESELECT.ATMPT
H9017:Number
Inter-RAT Netw
Controlled Cell
Reselection Atte
1279172434 NC.CELL.2G.TO.3G.RESELECT.ATMPT
H9018:Number
Network-Contro
2G to 3G Cell
Reselection Atte
1279172435 NC.CELL.2G.TO.3G.RESELECT.FAIL
H9019:Number
Failed NetworkControlled 2G to
Cell Reselection
Counter ID
Counter Name
Counter Descrip
1282429797 NC.CELL.TRAFFIC.RESELECT.ATMPT
H9020:Number
Network-Contro
Cell Reselection
Attempts Due to
Service Type
1282432868 NC.CELL.FORCE.RESELECT.ATMPT
H9504:Number
Forced Network
Controlled Cell
Reselection Atte
1279172426 NC.CELL.RESELECT.ATMPT
H9010:Number
Network-Contro
Cell Reselection
Attempts
1279172427 NC.CELL.URG.RESELECT.ATMPT
H9011:Number
Network-Contro
Cell Reselection
Attempts Due to
Downlink Qualit
Counter ID
Counter Name
Counter Descrip
1279172428 NC.CELL.LOAD.RESELECT.ATMPT
H9012:Number
Network-Contro
Cell Reselection
Attempts due to
Traffic Load
1279172429 NC.CELL.GENERAL.RESELECT.ATMPT
H9013:Number
Network-Contro
Cell Reselection
Attempts for Be
Cell
1279172430 NC.CELL.RESELECT.FAIL.ATMPT
H9014:Number
Failed NetworkControlled Cell
Reselections
1279172433 NC.CELL.INTERRAN.RESELECT.ATMPT
H9017:Number
Inter-RAT Netw
Controlled Cell
Counter ID
Counter Name
Counter Descrip
Reselection Atte
1279172434 NC.CELL.2G.TO.3G.RESELECT.ATMPT
H9018:Number
Network-Contro
2G to 3G Cell
Reselection Atte
1279172435 NC.CELL.2G.TO.3G.RESELECT.FAIL
H9019:Number
Failed NetworkControlled 2G to
Cell Reselection
1282429797 NC.CELL.TRAFFIC.RESELECT.ATMPT
H9020:Number
Network-Contro
Cell Reselection
Attempts Due to
Service Type
1282432868 NC.CELL.FORCE.RESELECT.ATMPT
H9504:Number
Forced Network
Controlled Cell
Counter ID
Counter Name
Counter Descrip
Reselection Atte
13
Glossary
14
Reference Documents