Beruflich Dokumente
Kultur Dokumente
Information
TSI041214
This TSI replaces TSI021224 dated August 2002.
Description
1
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Figure 1
1.
2.
3.
Model
Engine Rating
EFRC
Unit Code
2002
A175
2111
12NPB
2002
A195
2121
12NRC
2002
A215
2141
12NPD
2002
A230
2152
12NPE
A175CF
2111
12NPB (12990)
2002
A195CF
2121
12NRC (12990)
2002
A215CF
2141
12NPD (12990)
2002
A230CF
2152
12NPE (12990)
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A175
Engine rating
2111
1843108C91, 1843481C91
1837985C91
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full load
and ambient temperature of 26.7 C (80 F) or above.
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A195
Engine rating
2121
1843108C91, 1843481C91
1837985C91
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A215
Engine rating
2141
1843108C91, 1843481C91
1837985C91
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
TSI041214
10
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
11
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A230
Engine rating
2152
1843108C91, 1843481C91
1837985C91
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
12
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
13
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
TSI041214
14
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A175CF
Engine rating
2111
1843108C91, 1843481C91
1837985C91
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
15
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
TSI041214
16
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above.
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
17
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A195CF
Engine rating
2121
1843108C91, 1843481C91
1837985C91
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
18
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
19
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
TSI041214
20
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A215CF
Engine rating
2141
1843108C91, 1843481C91
1837985C91
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
21
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
TSI041214
22
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
23
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A230CF
Engine rating
2152
1843108C91, 1843481C91
1837985C91
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
24
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
25
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
TSI041214
26
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Figure 2
1.
2.
3.
Model
Engine Rating
EFRC
Unit Code
2003
A175
2111
12NPB
2003
A200
2131
12NRU
2003
A215
2141
12NPD
2003
A230
2152
12NPE
A175CF
2111
12NPB (12990)
2003
A200CF
2131
12NRU (12990)
2003
A215CF
2141
12NPD (12990)
2003
A230CF
2152
12NPE (12990)
27
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A175
Engine rating
2111
1843481C95
1837985C93
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
28
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
29
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above.
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
TSI041214
30
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A200
Engine rating
2131
1843481C95
1837985C93
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
31
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
TSI041214
32
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
33
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A215
Engine rating
2141
1843481C95
1837985C93
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
34
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
35
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
TSI041214
36
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A230
Engine rating
2152
1843481C95
1837985C93
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
37
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
TSI041214
38
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
39
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A175CF
Engine rating
2111
1843481C95
1837985C93
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
40
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
41
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above.
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
TSI041214
42
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A200CF
Engine rating
2131
1843481C95
1837985C93
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
43
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
TSI041214
44
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
45
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A215CF
Engine rating
2141
1843481C95
1837985C93
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
TSI041214
46
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
47
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
TSI041214
48
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
A230CF
Engine rating
2152
1843481C95
1837985C93
Injection timing
Nonadjustable
2950 rpm
2950 rpm
700 rpm
Engine cranking
Minimum battery voltage
9.0 V
100 rpm
EGRP starting
0% (0.6 V to 1.2 V)
EGR position
Closed
0% (0.6 V to 1.2 V)
Open
49
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
Data taken at full load, rated speed on chassis dynamometer or highway, stabilized operating temperature
Air cleaner restriction, maximum
TSI041214
50
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation
121 C (250 F)
Measure water temperature differential across the radiator with engine on a chassis dynamometer, at full
load and ambient temperature of 26.7 C (80 F) or above
Water temperature differential across radiator
2 C to 5 C (6 F to 12 F)
Thermostat specifications
Type
70 C (158 F)
87 C to 91 C (188 F to 196 F)
104 C (219 F)
42 cetane
Expected temperature
Above -7 C (20 F)
Grade No. 2D
Below -7 C (20 F)
Grade No. 1D
NOTE: If grade No. 1D is not available, use a winterized or climatized Grade No. 2D fuel. This is made by blending
Grade No. 1D with No. 2D fuel to match the temperature conditions in your area.
Lubrication specifications
Oil quality
Oil viscosity
15W-40 preferred
51
TSI041214
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
2004 International Truck and Engine Corporation