Beruflich Dokumente
Kultur Dokumente
inShare2
In SFTP adapter the following interactive options are included for handling large sized files:
Bypass PI Runtime For File Transfer
Chunk Mode
Chunk Mode
This option allows user to divide an incoming message into chunks of message ranging from
1 MB to 50 MB size as configured.
Prerequisites
You need to install ESR content patch (Minimum patch 02 of SP 04 for XI CONTENT SFTP ADAPTER
1.0) provided as part of the SAP Note 2144272. Upon successful deployment of ESR content patch,
apply minimum of the patch number 8 or more of PIB2BSFTP SP04 for availing the fixes.
Procedure
Enabling Bypass PI Runtime for File Transfer
1. Choose Edit in the Edit Communication Channel screen.
2. Open Processing tab under the Parameters tab.
3.2 In the Absolute File Path (including Filename) field, specify a valid path along with the file name for
saving the incoming file on the PI system.
4. Perform the following steps to verify the configuration and the file transfer:
4.1 Open Communication Channel Monitor.
4.2 Start the Sender Channel.
4.3 Go to the Storage location specified in the Large File Handling section at the time of configuration
and verify that the incoming message has been saved.
4.4 Also verify that a file containing the details of the storage location has been put in the out directory
of receiver channel.
Example: An XML file will be created in the storage location with the details as given below:
Parameters such as source file location, target file location, file size, time of creation are available in
the XML file.
4.5 You can also verify the audit log as shown below.
3.1 In the Special Processing Mode field, set the value as Chunk Mode.
This value appears for selection only when the Quality of Service value is Exactly Once in
order (asynchronous)
3.2 In the Maximum Size (MB) field, select a desired value of chunk size you want the
incoming message to be divided by.
4. Perform the following steps to verify the configuration and chunking of message:
4.1 Open Communication Channel Monitor.
4.3 Verify that the audit log for checking the chunking happens.
inShare2
2 Comments
Hi,
Good to know the new features of the SFTP Adapter.
1. Does the large File handling supports the mapping ( i.e. structural transformation) or it can
be used only for pass through scenarios ?
2.when we use the option By Pass PI Runtime ...Can we specify only PI Directory (NFS) or we
can use any other File directory.. Also what will be advantage of Bypassing the PI Run time.
Like (0)
o
Piyush Chougaonkar 21-Apr-2015 12:02 (in response to Rajesh pasupula)
Hi Rajesh,
1) Large File Handling options will not support mapping.
a) In Chunk Mode: Mapping is strictly not recommended as these are not logical
chunks. The chunks will be made on the basis of size.
b) In Bypass option: The large file will not be part of XI message payload. XI
message payload will contain a metadata file. You can have mapping for this
metadata file if needed.
2) You can specify any file directory(Local or NFS) which is reachable from PI box.
Bypass option will help you to download large files from SFTP server into your local file
system without risking OOM errors.
Hope that clarifies your doubts.
regards,
Piyush