Beruflich Dokumente
Kultur Dokumente
OPERATION INSTRUCTIONS
KEYBOARD SIMULATOR
Contents
About the Keyboard Simulator ............................................................................. 1
What is the Keyboard Simulator?........................................................................... . 1
What Controls the Keyboard Simulator? ................................................................. . 1
What Does the Keyboard Simulator Simulate? ......................................................... 1
Tips .............................................................................................................................. 6
Learning to Use the Keyboard Simulator ................................................................. . 6
Resetting the Keyboard Simulator .......................................................................... . 6
Steering to a Preset Angle .................................................................................... . 6
Measuring Caster ................................................................................................. . 7
Contents i
2 Controlling
the KeyboardKeyboard
SimulatorSimulator
Operation Instructions
About theKeyboard
KeyboardSimulator
Simulator
Operation Instructions
1
The Keys
The keyboard simulator is controlled by using the following keys:
F8
to compensate a sensor
to reset a sensor
and
and
0 through 9
,
, , and
These keys are modified using a combination of the Shift, Alt, and Ctrl keys. These
modifier keys are held down, as needed, while the keys listed above are pressed. For
example, to decrease the battery voltage of the selected sensor, hold down Alt and
press .
NOTE:
When you press a key to change a value, such as camber, pressing the key once
changes the value by a small amount. Pressing and holding the key will repeatedly
change the value by that same small amount. (This is the keyboard auto-repeating.)
Pressing and holding Shift (S) while changing the value will increase the speed of the
change. Thus, you control the changes by pressing the desired keys the appropriate
number of times, or by holding the keys down for the necessary length of time.
When the console displays any screen that uses data from real sensors, you can
control the keyboard simulator using the keyboard. On all other screens, these keys
have other functions (such as editing specs or notes) or are ignored.
2 Controlling
the KeyboardKeyboard
SimulatorSimulator
Operation Instructions
About theKeyboard
KeyboardSimulator
Simulator
Operation Instructions
2
NOTE:
Selecting a Sensor
To select a sensor, press ONE of the sensor selection keys, as follows:
press F9
Compensating a Sensor
To compensate a sensor, press Alt and c. This compensates the sensor
immediately.
When you compensate a sensor, the next sensor is automatically selected. This lets
you press Alt and c four times in a row to compensate all four sensors.
4 Controlling
the KeyboardKeyboard
SimulatorSimulator
Operation Instructions
theKeyboard
KeyboardSimulator
Simulator
OperationControlling
Instructions
3
Steering an Axle
To steer an axle, first select either sensor on the axle, then press Alt, Ctrl and
to steer the axle to the left, or press Alt, Ctrl and to steer it to the right. This
is useful for steering to measure caster.
Miscellaneous Controls
Program status when you press Shift and Ctrl and F1 application version
information is displayed as well as features status.
Enable/disable shortcut demo features when you press Shift and Alt and Ctrl
and F9 the demo shortcut feature is enabled. Press the same combination of
keys again and the feature is disabled.
A drop down menu of product demo features can be accessed from the shortcut
demo mode. To access product demo videos, insert a product demo CD and left
- click with the mouse on the blue area of the active screen then click on
Refresh Menu at the bottom of the drop down menu. You must click on Refresh
Menu each time you change CDs.
4 Controlling
the KeyboardKeyboard
SimulatorSimulator
Operation Instructions
theKeyboard
KeyboardSimulator
Simulator
OperationControlling
Instructions
4
Drop down menu at measurement & adjustment bar graphs when you press the
tab key from a bar graph screen, a drop down menu for the selected bargraph
appears that provides additional WinAlign features, specific for that bar graph.
Transmit measurements when you press Shift and F1 on the measurements
screen, the current alignment angles will be transmitted to a file. You will be
prompted to enter a name for the file.
Display language into English when you press Shift and Ctrl and E the
displayed language will be changed into English.
Information displayed:
WinAlign
version number
build number
version comment
min. WinAlign
4 Controlling
the KeyboardKeyboard
SimulatorSimulator
Operation Instructions
theKeyboard
KeyboardSimulator
Simulator
OperationControlling
Instructions
5
Tips
6 Tips
Operation Instructions Keyboard Simulator
Tips
Operation Instructions Keyboard Simulator
6
Measuring Caster
To measure a caster of a known amount, do the following:
Begin measuring caster in the usual manner.
When the caster measure popup screen directs you to steer to the right 10
degrees, change left and right camber by computed amounts (as described below).
Finish measuring caster. The measured caster will have the desired amounts.
To compute how much to change camber, divide the desired caster by 2.86. Each
or keystroke changes camber by 0.01 degrees. If Shift is held down, each
keystroke changes camber by 0.04 degrees. You must steer to the center of the bar
graphs to produce accurate simulations using these computations.
For example, if the desired caster is 0.85 degrees, compute the change as 0.85 / 2.86
= 0.30 degrees. To change camber by this amount during caster steer, press Shift seven times, and two times (7 x 0.04 + 2 x 0.01 = 0.30).
6 Tips
Operation Instructions Keyboard Simulator
Tips
Operation Instructions Keyboard Simulator
7
Keystrokes
shift alt ctrl F8
shift alt ctrl F8
shift
F8
F9
F10
F11
F12
(for selected sensor)
alt c
alt r
(S)
alt
(S)
alt
(S)
(S)
shift
alt ctrl
alt ctrl
alt 0-9
alt 0-9
Adjust Camber
lean wheel left for camber
lean wheel right for camber
Adjust Caster
lean strut forward for caster
lean strut rearward for caster
copy caster adjust to measured caster
Adjust Toe
steer wheel left for toe
steer wheel right for toe
CAMM
adjusting front control arm
adjusting rear control arm
Miscellaneous Controls
program status
enable shortcut demo features
disable features
drop down menu at measurement & adjustment
bar graphs
transmit measurements
put displayed language into English
8 Keyboard
KeyKeyboard
FunctionsSimulator
OperationSimulator
Instructions
shift
ctrl F1
shift alt ctrl F9
shift alt ctrl F9
tab
shift
shift
F1
ctrl E
Keyboard
Simulator
Key Functions
Operation
Instructions
Keyboard
Simulator 9
8 Keyboard
KeyKeyboard
FunctionsSimulator
OperationSimulator
Instructions
Keyboard
Simulator
Key Functions
Operation
Instructions
Keyboard
Simulator 9