Beruflich Dokumente
Kultur Dokumente
Page 1 of 2
About Us
Casting Products
Casting Workshop
Machining Workshop
Inspection
Certificate
Blog Articles
Contact Us
EN-GJS-500-7 Equivalent
This grade is equal to the material grades ISO 500-7, China QT500-7, USA ASTM A536 70-50-05, Japan FCD500, Italy GS500-7,
France FGS500-7, India SG500/7, Spain FGE50-7, Belgium FNG50-7, Norway SJK-500.
The tensile strength and elongation are the key inspection standard for qualification. Buyers could judge unqualified castings
according to these two parameters. Hardness can not be taken as an quality evaluation data unless you have special requirement.
C: 2.7-3.7.
Si: 0.8-2.9
Mn: 0.3-0.7
P: 0.1
S: 0.02
The chemical composition has big difference in different standards. All compositions are just for reference. The international
standards stipulate that the manufacturers could adjust their chemical composition according to their experience and production
conditions, as long as their material could meet the mechanical properties.
Production Foundries
EN-GJS-500-7, or called as cast iron GGG50, is a very common and normal cast iron grade. Most of iron foundries in China could
produce this material. So, it is not difficult to find a foundry who could produce it, but just difficult to find one who could produce it
very well. In other words, consistent quality is always important.
There are many casting products using this grade, such as iron brackets for trucks, tractors, other agricultural and construction
machinery. The followings are some casting products manufactured by our foundry.
tractor parts
http://www.iron-foundry.com/en-gjs-500-7-ductile-cast-iron-ggg50.html
27.01.2016
Page 2 of 2
truck parts
http://www.iron-foundry.com/en-gjs-500-7-ductile-cast-iron-ggg50.html
27.01.2016