Beruflich Dokumente
Kultur Dokumente
Subtex Nubb
Supply and Installation of Anutone Subtex Nubby, steppe edge, Glass fibre core ceiling tile of size 595x595x15mm having dens
The T15 Grid system of 600x600mm module shall include wall angle(WA15W30) with unequal flanges of size 14&20mm wide,
suspend the Main T15(MT15W36) having flange width 15mm, height 32mm and length 3600mm from the soffit with help of so
then interlocked into the pre-cut slots in the Main T15 at 600mm centers in the direction perpendicular to the Main T15. Finally
T15 at 1200mm centers and in direction parallel to the Main T15. Subtex Nubby steppe edge of size 595x595x15mm thick sha
Technical Parameters
Core - Glassfibre
Fire Class 1 & P
Acoustics NRC 0.9
Climate (OC RH) 40, 95
Termite resistance Yes
Light reflectance 85 %
Green (RC %) 35
Hygiene (VoC, Clean room) Low, Class 3
Strength, Load capacity (Kg) - Antisag
Description
Skelet Trelis T15 Wall Angle WA15W30
Skelet Trelis T15 MT15W36 @ 1200mm centres
Skelet Trelis T15 CT15W12@ 600mm centres
Skelet Trelis T15 CT15W06 @ 1200mm centres
Subtex Nubby Panels 595x595x15mm,steppe edge
Anchor Bolt, Soffit Cleat, Butterfly clip, Suspension wire/Rod, Spacer Bar
Total
Wastage @3% on total product cost
Tools and tackles @ 2% total product cost
Cost of Labour @10% on product cost
Scaffolding and transportations (5%) on product cost
Service tax 14% on product cost
Subtotal
Contractors margin@10% on subtotal
Grand Total
Rate per m2
X595-ceiling
eight 1.5-3.0kg/m2 which is suspended by using 0.3mm thick and 15mm wide pre coated metal T15 grid system.
mm thick fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then
ith leveling spring clip at 1200mm c/c. Cross T15(CT15W12) having flange width 15mm, height 32mm and length 1200mm is
having flange width 15mm, height 32mm and length 600mm are then interlocked into the pre cut slots in the 1200mm Cross
id size of 600x600mm. Ensure arrow marks behind subtex panels are orianted in one direction to achieve uniform shade.
Units
lm
lm
lm
lm
m2
m2
Qtys
40
90
170
90
100
100
Rate /
Unit
33
43
43
43
1246
100
VAT14.5
%
4.785
6.235
6.235
6.235
180.67
14.5
Sub Total
37.785
49.235
49.235
49.235
1426.67
insu
0.7%
0.264495
0.344645
0.344645
0.344645
9.98669
Total
38.049495
49.579645
49.579645
49.579645
1436.6567
114.5
0.8015
115.3015
grid system.
Grand
Total
1521.9798
4462.1681
8428.5397
4462.1681
143665.67
11530.15
174070.67
5222.1202
3481.4135
17407.067
8703.5337
24369.894
233254.7
23325.47
256580
2565.802
Sr.No.
3a
Supply and Installation of Anutone Sisoli Serene, steppe edge, Mineral fibre core ceiling tiles of size 595x595x15mm having d
grid system.
TheT15 Grid system of 600x600mm module shall include wall angle(WA15W30) with unequal flanges of size 14&20mm wide,
suspend the Main T15(MT15W36) having flange width 15mm, height 32mm and length 3600mm from the soffit with help of so
is then interlocked into the pre-cut slots in the Main T15 at 600mm centers in the direction perpendicular to the Main T15. Final
Cross T15 at 1200mm centers and in direction parallel to the Main T15. Sisoli Serene steppe edge of size 595x595x15mm thi
Optional: The system is backlined with the acoustical infill Anutone Synth PF 10x25mm thick.
Technical Parameters
Core - Mineralfibre
Fire 1/A
Acoustics NRC 0.45 - 0.6
Climate (OC RH) 49,90
Termite resistance Yes
Light reflectance 81 - 85 %
Green (RC %) 63
Hygiene (VoC, Clean room) Low, Class 3
Strength, Load capacity (Kg) - Antisag
Description
Skelet Trelis T15 Wall Angle WA15W30
Skelet Trelis T15 MT15W36 @ 1200mm centres
Skelet Trelis T15 CT15W12@ 600mm centres
Skelet Trelis T15 CT15W06 @ 1200mm centres
Sisoli Serene Panels 595x595x15mm,steppe edge
Anchor Bolt, Soffit Cleat, Butterfly clip, Suspension wire/Rod, Spacer Bar
Total
Wastage @3% on total product cost
Tools and tackles @ 2% total product cost
Cost of Labour @10% on product cost
Scaffolding and transportations (5%) on product cost
Service Tax 14% on product cost
Subtotal
Contractors margin@10% on subtotal
Grand Total
Rate per m2
320-350(plus)kgs/ m3, weight 3.6-5.4kg/m2 which is suspended by using 0.3mm thick and 15mm wide pre coated metal T15
mm thick fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then
ith leveling spring clip at 1200mm c/c. Cross T15(CT15W12) having flange width 15mm, height 32mm and length 1200mm
6) having flange width 15mm, height 32mm and length 600mm are then interlocked into the pre cut slots in the 1200mm
the grid size of 600x600mm.
Units
lm
lm
lm
lm
m2
m2
Qtys
40
90
170
90
100
100
Rate /
Unit
33
43
43
43
422
100
VAT14.5
%
4.785
6.235
6.235
6.235
61.19
14.5
Sub Total
37.785
49.235
49.235
49.235
483.19
114.5
insu
0.7%
0.264495
0.344645
0.344645
0.344645
3.38233
0.8015
Total
38.0495
49.57965
49.57965
49.57965
486.5723
115.3015
Grand
Total
1521.98
4462.168
8428.54
4462.168
48657.23
11530.15
79062.24
2371.867
1581.245
7906.224
3953.112
11068.71
105943.4
10594.34
116537.7
1165.377
Sr.No.
Ra
Anutone Soft Subtex NRC-wall
Supply and Installation of Anutone Subtex NRC hardened square edge, FR grade Cara fabric (colour choice) wrapped soft fibre
Impaling clips are attached directly to the wall/frame work with the points extending outward . Then panels are positioned and p
Technical Parameters
Core - Glassfibre
Fire Class 1 & P
Acoustics NRC up to 0.9
Climate (OC RH) 40, 90
Termite resistance Yes
Light reflectance Colour dependent
Green (RC %) 25
Hygiene (VoC, Clean room) Low, Class 3
Strength, Load capacity (Kg) - Antisag
Description
Impaling clips
Subtex NRC 1200x600x25mm square edge
Total
Wastage @3% on total product cost
Tools and tackles @ 2% total product cost
Cost of Labour @10% on product cost
Scaffolding and transportations (5%) on product cost
Service Tax 14% on product cost
Subtotal
Contractors margin@10% on subtotal
Grand Total
Rate per m2
f size 600x1200x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 installed by using impaling clip.
ace .
Units
Nos
m2
Qtys
695
100
Rate /
Unit
8
4215
VAT14.5
insu
%
Sub Total 0.7%
Total
1.16
9.16
0.06412
9.22412
611.175 4826.175 33.78323 4859.958
Grand
Total
6410.763
485995.8
492406.6
14772.2
9848.132
49240.66
24620.33
68936.92
659824.8
65982.48
725807.3
7258.073
Sr.No.
Supply & installation of Anutone Slats Plus fiber board made out of pinewood particals , Melamine / veneer laminated finish, p
centers) /L64-2 - (2mm grooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless
system.
The GI strut system includes GI Cross channel(CC10) having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10
0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fix
bothways.
Optional: Panels shall be backlined with acoustical infill of Anutone Synth PF 10/25/50mm thick adhered to the wall using Stick
Technical Parameters
Core Variants - Fibreboard
Fire Class 1 & P
Acoustics NRC upto 0.75
Climate (OC RH) 50, 70
Light reflectance 75%
Green (RC %) 25
Hygiene (VoC, Clean room) Low, Class 1
Strength, Load capacity (Kg) - Antisag, Ball-Impact
Description
Cross channel CC10 @ 600mm centres
Cross channel CC18 @ 400mm centres with brackets
Slats plus L 16-2 2440x128x16mm thick
Total
Wastage @3% on total product cost
Tools and tackles @ 2% total product cost
Cost of Labour @10% on product cost
Scaffolding and transportations (5%) on product cost
Service Tax 14% on product cost
Subtotal
Contractors margin@10% on subtotal
Grand Total
Rate per m2
ved slats L8-2 - (2mm grooves @ 8mm centers) / L16-2 - (2mm Slats @16mm pitch) / L32-2 - (2mm grooves @ 32mm
al dimension size 128mm x 2440mm x 16mm thick having density 800Kg /m3, weight 12.8Kgs/m2 installed by using GI strut
s 15mm is fastened vertically/horizontally at every 600mm centers. Aluminium core cross channel (CC18) having thickness
e CC10 with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts
Units
lm
m2
m2
Qtys
169.2
100
100
Rate /
Unit
38
403
2575
VAT14.5
%
Sub Total
5.51
43.51
58.435
461.435
373.375 2948.375
insu
0.7%
Total
0.30457 43.81457
3.230045 464.665
20.63863 2969.014
m grooves @ 32mm
installed by using GI strut
Grand Total
7,413.00
46,467.00
296,901.00
350781
10523.43
7015.62
35078.1
17539.05
49109.34
470046.54
47004.654
517051.194
5170.51194
Sr.No.
Pixel Taper-ceiling
Supply and Installation of Micro perforated Vinyl laminated gypsum panels with aluminium foil back Pixel having 3x3mm squar
weight 7.2 Kgs/m2 which is fixed by using exposed Grid system.
The T15 Grid system of 600x600mm module shall include wall angle(WA15W30) with unequal flanges of size 14&20mm wide,
suspend the Main T15(MT15W36) having flange width 15mm, height 32mm and length 3600mm from the soffit with help of so
is then interlocked into the pre-cut slots in the Main T15 at 600mm centers in the direction perpendicular to the Main T15. Final
Cross T15 at 1200mm centers and in direction parallel to the Main T15. Subtex Nubby steppe edge of size 595x595x15mm th
shade.
Optional: The system is backlined with the acoustical infill Anutone Synth PF 10x25mm thick.
Technical Parameters
Core - GFR Gypsum
Fire A2-s1, d0
Acoustics NRC 0.75
Climate (OC RH) 50, 70
Termite resistance Yes
Light reflectance 75%
Green (RC %) 25
Hygiene (VoC, Clean room) Low, Class 1
Description
Skelet Trelis T15 Wall Angle WA15W30
Skelet Trelis T15 MT15W36 @ 1200mm centres
Skelet Trelis T15 CT15W12@ 600mm centres
Skelet Trelis T15 CT15W06 @ 1200mm centres
Pixel Taper 595x595x9mm thick
Anchor Bolt, Soffit Cleat, Butterfly clip, Suspension wire/Rod, Spacer Bar
Total
Wastage @3% on total product cost
Tools and tackles @ 2% total product cost
Cost of Labour @10% on product cost
Scaffolding and transportations (5%) on product cost
Service Tax 14% on product cost
Subtotal
Contractors margin@10% on subtotal
Grand Total
Rate per m2
mm pitch - 10.2 % open area, of size 595x595x9mm thick tapered edge along the length having density 800 Kgs / m3,
mm thick fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then
ith leveling spring clip at 1200mm c/c. Cross T15(CT15W12) having flange width 15mm, height 32mm and length 1200mm
6) having flange width 15mm, height 32mm and length 600mm are then interlocked into the pre cut slots in the 1200mm
o the grid size of 600x600mm. Ensure arrow marks behind subtex panels are orianted in one direction to achieve uniform
Units
lm
lm
lm
lm
m2
m2
Qtys
40
90
170
90
100
100
Rate /
Unit
33
43
43
43
350
100
VAT14.5
%
4.785
6.235
6.235
6.235
50.75
14.5
Sub Total
37.785
49.235
49.235
49.235
400.75
114.5
insu
0.7%
0.264495
0.344645
0.344645
0.344645
2.80525
0.8015
Total
38.0495
49.57965
49.57965
49.57965
403.5553
115.3015
Grand
Total
1521.98
4462.168
8428.54
4462.168
40355.53
11530.15
70760.53
2122.816
1415.211
7076.053
3538.027
9906.474
94819.11
9481.911
104301
1043.01
Sr.No.
12
Supply and Installation of Anutone Soak Coard of selected colours (ref colour chart) Kerf edge Fabric wrapped wood fiber pane
The GI strut works includes Cross channel(CC50) having thickness 0.45mm, length 3600mm, knurled web 50, depth 50mm an
having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels(CC50) at 600mm centers. Kerfed e
Optional: Panels shall be backlined with acoustical infill of Anutone Synth PF 10x50mm thick adhered to the wall using Stick 7 a
Technical Parameters -Wood fibre
Core Variants - wood fibre
Fire Class 1 & P
Acoustics NRC 0.95
Climate (OC RH) 50, 90
Termite resistance Yes
Light reflectance color dependant
Green (RC %) 10
Hygiene (VoC, Clean room) Low
Strength, Load capacity (Kg) - Antisag & ball impact
Description
Ceiling channel CC50 @ 600mm centres
H-Splines @ 600mm
Soak Cord 2400x600x20mm thick kerfed edge
Total
Wastage @3% on total product cost
Tools and tackles @ 2% total product cost
Cost of Labour @10% on product cost
Scaffolding and transportations (5%) on product cost
Service Tax 14% on product cost
Subtotal
Contractors margin@10% on subtotal
Grand Total
Rate per m2
0mm having density 400Kgs/m3, weight 4-20kg/m2 installed by using GI strut system.
m is fastened to Wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline
anels shall be then inserted into the H-spline against wall to perfect fit.
Units
lm
lm
m2
Qtys
194.6
169.2
100
Rate /
Unit
100
86
2550
VAT14.5
%
14.5
12.47
369.75
insu
Sub Total 0.7%
114.5
0.8015
98.47
0.68929
2919.75 20.43825
Total
115.3015
99.15929
2940.188
Grand
Total
22437.67
16777.75
294018.8
333234.2
9997.027
6664.685
33323.42
16661.71
46652.79
446533.9
44653.39
491187.3
4911.873
Sr.No.
14
Supply and installation of Anutone Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by u
requisite accessories & tools.
Woodenbase 10mm is first installed on the wall along the marking lines with metal fasteners at 300mm centers . FS25 tracks to
fasteners at 15mm centers on one/both sides of Stretch Tracks.
Strand square edge magnesite bonded wood fiber panels of size 600x1200x15mm having density 400kg/m3, weight 4-8kg whic
Stretch tracks by following the fabric thread line or pattern. The fabric is stuck on the Align Tape (by removing the protective cov
wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width wo
Technical Parameters
Core - woodfibre & Poly fibre
Fire 1
Acoustics NRC 0.85
Climate (OC RH) 49, 90
Termite resistance Yes
Light reflectance Colour dependent
Green (RC %) 25
Hygiene (VoC, Clean room) Low, Class 1
Description
Track Perimeter HW 25mm
Strand 15mm
Track Midseam 25mm
Synth 5x25
Stick S7
Stretch NRC Fabric 1700mm Wide
Total
Wastage @3% on total product cost
Tools and tackles @ 2% total product cost
Cost of Labour @10% on product cost
Scaffolding and transportations (5%) on product cost
Contractors overheads 10% on product cost
Subtotal
Service Tax@14% on subtotal
Grand Total
Rate per m2
mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm(FS25) and Midseam 25mm(FS25) , strand, synth PF with
en base, by using Base tape (by removing the protective cover) for a true and continuous secure grip, and heavy-duty
h PF 10x10mm thick adhered on strand panel by using Stick 7 adhesive. Fabric of width 1700mm is then aligned to the
s being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of
Units
lm
m2
lm
m2
ltrs
m2
Qtys
62.8
100
64.8
100
35
100
Rate /
Unit
108
909
140
293
386
799
VAT14.5
%
Sub Total
15.66
123.66
131.805 1040.805
20.3
160.3
42.485
335.485
441.97
55.97
115.855
914.855
insu
0.7%
0.86562
7.285635
1.1221
2.348395
3.09379
6.403985
Total
124.5256
1048.091
161.4221
337.8334
445.0638
921.259
Grand
Total
7820.209
104809.1
10460.15
33783.34
15577.23
92125.9
264575.9
7937.277
5291.518
26457.59
13228.79
26457.59
343948.7
48152.81
392101.5
3921.015
Sr.No.
Rate Analysis
Slate Vin 595x595 mm ceiling
Supply and Installation of Vinyl laminated gypsum panels with aluminium foil back,of size 595x595x9mm thick tapered edge a
The T15 Grid system of 600x600mm module shall include wall angle(WA15W30) with unequal flanges of size 14&20mm wide,
suitable fasteners at 300mm centers. Then suspend the Main T15(MT15W36) having flange width 15mm, height 32mm and le
Cross T15(CT15W12) having flange width 15mm, height 32mm and length 1200mm is then interlocked into the pre-cut slots in
T15(CT15W06) having flange width 15mm, height 32mm and length 600mm are then interlocked into the pre cut slots in the 12
edge of size 595x595x15mm thick shall be placed into the grid size of 600x600mm. Ensure arrow marks behind subtex panels
Technical Parameters
Core - GFR Gypsum
Fire A2-s1, d0
Acoustics NRC 0.40
Climate (OC RH) 50, 70
Termite resistance Yes
Light reflectance 75%
Green (RC %) 25
Hygiene (VoC, Clean room) Low, Class 1
Description
Skelet Trelis T15 Wall Angle WA15W30
Skelet Trelis T15 MT15W36 @ 1200mm centres
Skelet Trelis T15 CT15W12@ 600mm centres
Skelet Trelis T15 CT15W06 @ 1200mm centres
Slate Vin 595x595x9mm thick
Anchor Bolt, Soffit Cleat, Butterfly clip, Suspension wire/Rod, Spacer Bar
Total
Wastage @3% on total product cost
Tools and tackles @ 2% total product cost
Cost of Labour @10% on product cost
Scaffolding and transportations (5%) on product cost
Service Tax 14% on product cost
Subtotal
Contractors margin@10% on subtotal
Grand Total
Rate per m2
Rate Analysis
ck tapered edge along the length having density 800 Kgs / m3, weight 7.2 Kgs/m2 in Exposed grid system
e 14&20mm wide, length 3000mm, 0.43mm thick fixed along the perimeter of walls with the help of nylon sleeves and
eight 32mm and length 3600mm from the soffit with help of soffit cleat and wire rod with leveling spring clip at 1200mm c/c.
the pre-cut slots in the Main T15 at 600mm centers in the direction perpendicular to the Main T15. Finally Cross
e cut slots in the 1200mm Cross T15 at 1200mm centers and in direction parallel to the Main T15. Subtex Nubby steppe
hind subtex panels are orianted in one direction to achieve uniform shade.
Units
lm
lm
lm
lm
m2
m2
Qtys
40
90
170
90
100
100
Rate /
Unit
33
43
43
43
248
100
VAT14.5
%
4.785
6.235
6.235
6.235
35.96
14.5
Sub Total
37.785
49.235
49.235
49.235
283.96
114.5
insu
0.7%
0.264495
0.344645
0.344645
0.344645
1.98772
0.8015
Total
38.0495
49.57965
49.57965
49.57965
285.9477
115.3015
Grand
Total
1521.98
4462.168
8428.54
4462.168
28594.77
11530.15
58999.78
1769.993
1179.996
5899.978
2949.989
8259.969
79059.7
7905.97
86965.67
869.6567