Beruflich Dokumente
Kultur Dokumente
problems are technical and a little mistake in them can change the results
dramatically, so it was also my goal to achieve to the detect the problem in
the design which is causing the result to deviate from the desired result and
then analyze the problem critically and find out which parameter is causing
error in the result and finally, correct it to get the desired results.
I think I am achieved my goals which
I set before the start of this subject. First of all, I learned the basics of the
subjects and make my concepts very clear about the subject on which we
are going to work. Then, secondly, I managed my projects and reports quite
well which I submitted in time. Moreover, I understand the subject and
analyze al the problems critically and find the result for all the problems with
the given time frame. So, overall, I managed to achieve my goals which I set
before the start of this course.
When I took the course of engineering problem solving and analysis II, it was
my perception that it is going to be very hard course and I am have to work
day and night just to pass this course. I was thinking that there will be a lot
burden on me for the assignment s and projects and I will not be able to get
the time for even food. I thought that there will be a lot of work and there are
many things in this course which I have to learn and learn it within time
because the time frame for this course was very small and all the work has
to done and learned within this prescribed time. I was thinking that I was will
employee of the company on which he can trust that he will be the one who
should get promotion.
Team work experience that
we have gained from this course is very important because it teaches us to
help other when they are in the problem. It is also important sue to the fact
that there are a lot courses ahead and there can be several in that as well, so
if we work as a team, it will help all of us. Moreover, every professional
engineer who is working in any company has to work with a lot of people and
in order to work well, an engineer should be a team man and works in such a
way so that all the people around him is happy with his work.
Leadership is art which has to be developed in an
engineer because engineer are the person who always works as the leader of
the team before their training and continue to work till the retirement as a
leader of some kind of team whether he is working with the team in the field
or doing managing work at the office. From this course, we have learned a lot
about the leadership, because we have solved and analyzed a lot of
problems while we were working in the team and in each team there was a
leader which was suggested by our instructor to lead the team. The leader of
the team should always an intelligent person and skillful person so that he
can guide the member of the team to work accordingly in different
situations. This is due to the fact that, in the field engineering there can be a
lot of problems and these problems can only be solved if there is someone
who can guide the members of the team properly as they are not experience
and did not have been through this process as well. A leader is always a role
model and everyone has to follow him in order to get the best desired
results.
One of the things that we need to improve
as a team worker is that sometimes, I depend too much on the other team
members and need their support all the time to complete my work. It is good
in a way that I keep myself in touch with my team members but it is very
bad because every member of the team has to do his work by himself and
should not depends on others for its work unless there is a serious problem
occurs which cannot be solved with the help of the other team members.
Moreover, I want to communicate with the leader of the team more than I did
previously and clarify my tasks so that there should be any ambiguity in my
mind when I begin to work on my project. It will help me in the future courses
as well because in every course there are a lot of problems and you need to
have a leader who can lead you to your desired results within the prescribed
time. Team work experience will also help me in my profession as well
because as an engineer, I have to do the job of leader and being under the
leader, I am able to understand the difficulties of the team members who are
working under your leadership. So, this will help in my profession as well.
This course is mostly related to problem solving related to the engineering as
clear from its name. An engineering team is always related to the problems
throughout its career and this course enhances ones ability to tackle with
lame; teacher is always awarded proper study hours for delivering lectures
according to the content of the specific course and students must get the
proper efficient way of solving the problem encountered because just by
cramming the specific method for solving problem to the answer may help in
the written exam but that will result in the oral exam or practical exam
failure. Teachers think that our education system is restricted to teach the
students in a way to memorize the prepared solutions of the problems and
just write down the crammed values in the exam. This is the main problem
faced by our education system members now days. This should be solved by
changing their minds to teach in the way of delivering concepts rather than
just covering the syllabus content. This is the way we have learned very
much from our course and have knowledge of solving the engineering
problem in a way they should be solved. The effective approach that we have
learned from this subject defines the effective problem solution. This method
defines the quality way of problem solving by listing the main points that can
be observed and measured. This method creates the goals of teaching and
learning as well. If proper concepts were not given to the students, they
cannot solve the problems with a bit difference in concept. This course
helped the students like me to solve problems by understanding and then
solving. We were asked purposefully to review our performances so that we
can identify which are our strong and weak points. Strong points should be
maintained and more effort should e applied to recover our weaknesses in
the concepts of solving problems. Teacher gave us proper reviews different
to each student on his/her each different work making sure that we get all
the possible learning from the educator about the course. Course delivered
to us was clear in its objective. Engineers usually interpret problems using
engineering studies and scientific methods. If some problems of unfamiliar
concept are faced, they use scientific studies and laws like gas laws, motion
laws, etc to make observations, then make decisions and solve problems
according to the concept understood.
The operational definition is not accepted universally as all the
educators do not agree with someones concept. Everyone is striving for
complex and abstract problems solving. This subject is distinct among the
engineering subjects as this emphasizes the learning of objectives in a
different operational way. This subject explained very well the proper way of
solving problems step by step. Solving engineering problems statistically
includes the following steps: first of all we have to identify the need or
purpose of solving the problem. Then the problem is defined and some
suggestions are considered for solving it conceptually. Search the related
problems and constraints in solving that problem. Search for some alternate
solutions of related problems solved previously. At the end, you will be able
to take some decisions on the behalf of previous steps. Failure is the mother
of invention. Always failure in some field or type of problem causes people to
make a proper solution. For example, food preserving was a problem faced
all over the world so this makes engineers worry about solving this for better
preservance. Thus tin can packing is introduced as a solution of preserving
food. Firstly this was solved by introducing glass bottles for preserving food.
Bottles were first filled with disinfecting water for killing bacteria and then
used for the storage. Technology then improved and now we have tin pack,
tetra pack technology in use of food preservation.